Only Quark SoCs used this IP block hanging off a PCI bus, and the PCI
support is written for the deprecated legacy PCI subsystem, so remove.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
When using offloaded network, an L2 is never assigned to the net_if.
Only certain portions of the net_if code are referenced such as:
net_if_up()
net_if_down()
And these functions make use of several L2 references:
get_flags()
enable()
Let's add checks to make sure we don't deref a NULL when using these
functions.
Fixes the following exception on K64F and other HW which can make
use of offloaded network HW:
FATAL: ***** Reserved Exception ( -16) *****
FATAL: r0/a1: 0x00000010 r1/a2: 0x0000644f r2/a3: 0x00000000
FATAL: r3/a4: 0x00000000 r12/ip: 0x2000474c r14/lr: 0x0001475b
FATAL: xpsr: 0x00000000
FATAL: Faulting instruction address (r15/pc): 0x0001b1cd
FATAL: >>> ZEPHYR FATAL ERROR 0: CPU exception
FATAL: Current thread: 0x20004c4c (unknown)
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18957
Signed-off-by: Michael Scott <mike@foundries.io>
ZLP flag should only be set if less data is sent
than requested by host and the length is a multiple
of wMaxPacketSize. Current implementation does not
check it correctly.
For some platforms like nRF52, this patch will not
be enough to fix the problem. The driver must be informed
about the transfer type before sending the last packet,
without changing the API, it is not possible.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Don't send zlp immediately after last packet for EP0.
Wait for write done event (in) before sending zlp.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Set limited amount of tries to write to USB control endpoint EP0.
Fixes#16223
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Moved arduino_spi to spi2
Set sck-pin in arduino_spi correctly as pin 25
Moved disabled spi0 miso pin assignment to pin 28
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
Adjust I2C timeouts after k_busy_wait precision has increased.
Report error on first I2C message failure.
Send STOP condition when error is detected.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This patch add tty runtime initialization check for console support
routines. Without it callers of routines API are not aware that
initialization of tty was failed. This patch basically checks
availability of console device and also its support for
interrupt driven transfers if routines are configured to use it.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
This patch adds HAS_SWO selections to all STM32 SoCs supporting Serial
Wire Output via the Trace Port Interface Unit (TPIU).
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Switch form using privater FCB error codes to
errno codes. FCB private codes convention were compatible
with <errno.h> codes:
- 0 mean success
- negative values mean errors
- similar error types.
There was no sense to kept private FCB error codes.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
As modem receiver is using UART, it requires disabling
of the UART and its callbacks to save power.
This adds simple sleep/wake functions which should be
called from defined device_pm functions in modem drivers later.
Signed-off-by: Christoph Schramm <schramm@makaio.com>
1) Dump time sinse last scheduler call
Could be handy for tickless kernel debug.
Will indicate that no rtc irq is called
2) Dump current timeout of each thread
Could be used to find yout when thread will wake up
3) Dump human friendly thread state
4) Use shell_prin instead shell_fprintf
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
Added ll_rx_link_inc_quota to allow vendor to manipulate
mem_link_rx.quota_pdu when cleaning up nodes via ull_vendor.h.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In setup messages addressing classes, USB standard defines that wIndex
constains interface number encoded in bits 0..7. Bits 8..15
are reserved and normally set to 0. However, in Audio Class they contain
entity number. Hence the need to filter 8 bits for getting interface
number.
Signed-off-by: Bartosz Sokolski <bartosz.sokolski@nordicsemi.no>
Corrected the amount of bytes copied for port handling in parse_ipv6
to prevent reading past the boundaries of the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Add new RD Client API of lwm2m_rd_client_stop() for this
Fix issues of de-register and event reporting in RD Client
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
Promote a handy and often-overlooked sys.exit() feature: Passing it a
string (or any other non-int object) prints it to stderr and exits with
status 1.
See the documentation at
https://docs.python.org/3/library/sys.html#sys.exit.
This indirectly prints some errors to stderr that previously went to
stdout.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It turns out that 'check_compiler_flag' has not been working for flags
that start with -Wno-. This has caused old compilers to accidentally
use flags that they do not support.
To fix this we check for compatibility with the appropriate -W flag
instead and infer the -Wno- compatibility from this check.
The root cause of this problem is explained well here:
https://github.com/zephyrproject-rtos/zephyr/pull/18922#discussion_r321537098
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Instead of
properties:
compatible:
constraint: "foo"
, just have
compatible: "foo"
at the top level of the binding.
For backwards compatibility, the old 'properties: compatible: ...' form
is still accepted for now, and is treated the same as a single-element
'compatible:'.
The old syntax was inspired by dt-schema (though it isn't
dt-schema-compatible), which is in turn a thin wrapper around
json-schema (the idea is to transform .dts files into YAML and then
verify them).
Maybe the idea was to gradually switch the syntax over to dt-schema and
then be able to use unmodified dt-schema bindings, but dt-schema is
really a different kind of tool (a completely standalone linter), and
works very differently from our stuff (see schemas/dt-core.yaml in the
dt-schema repo to get an idea of just how differently).
Better to keep it simple.
This commit also piggybacks some clarifications to the binding template
re. '#cells:'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A bare 'except:' can do some annoying stuff like eat Ctrl-C (because it
catches KeyboardInterrupt). Better to use 'except Exception:' as a
catch-all.
Even better might be to catch some more specific exception, because even
'except Exception:' eats stuff like misspelled identifiers.
Fixes this pylint warning:
W0702: No exception type(s) specified (bare-except)
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Doesn't use 'self'. Fixes this pylint warning:
scripts/dts/edtlib.py:272:4: R0201: Method could be a function
(no-self-use)
Fixing pylint warnings for a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Having backwards compatibility for !include and 'constraint:' is silly
without also having backwards compatibility for 'category:', because
that forces a binding change anyway.
Add backwards compatibility for 'category:', and just print a
deprecation warning when it's used.
Also move tests for deprecated features into a dedicated
test-bindings/deprecated.yaml binding, instead of piggybacking on other
tests.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Suppress this pylint warning so that it can be enabled in the upcoming
CI check. The code is safe.
scripts/dts/dtlib.py:1904:13: W0631: Using possibly undefined loop
variable 'i' (undefined-loop-variable)
Also add some more comments to clarify _init_tokens().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
"\w" gives a two-character string, but is iffy, because it relies on \w
not being defined as an escape sequence. r"\w" is better.
Fixes this pylint warning:
scripts/dts/devicetree.py:134:0: W1401: Anomalous backslash in
string: '\w'. String constant might be missing an r prefix.
(anomalous-backslash-in-string)
Wondering if I should exclude the old DTS scripts from the pylint CI
check, but doesn't hurt to fix it at least.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move some property fetching and node deletion code from the DT class
over to the Node class. Reads pretty nicely, and indirectly gets rid of
two unused 'self' arguments.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fixes an upcoming error:
device tree error: 'hw-flow-control' appears in /soc/uart@40028000
in nrf52840_pca10056.dts.pre.tmp, but is not declared in
'properties:' in .../dts/bindings/serial/nordic,nrf-uarte.yaml
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix pylint warnings for bad indent, redundant len()s in conditionals,
tests that could be improved with 'in', methods that don't use 'self',
and type()s where isinstance() is more common.
Preparation for adding a CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Have
include: foo.dts
include: [foo.dts, bar.dts]
instead of
inherits:
!include foo.dts
inherits:
!include [foo.dts, bar.dts]
This is a nicer and shorter and less cryptic syntax, and will make it
possible to get rid of the custom PyYAML constructor for '!include'
later.
'inherits: !include ...' is still supported for backwards compatibility
for now. Later on, I'm planning to mass-replace it, add a deprecation
warning if it's used, and document 'include:'. Then the '!include'
implementation can be removed a bit later.
'!include' has caused issues in the past (see the comment above the
add_constructor() call), gets iffy with multiple EDT instances, and
makes the code harder to follow.
I'm guessing '!include' might've been intended to be useful outside of
'inherits:' originally, but that's the only place where it's used. It's
undocumented that it's possible to put it elsewhere.
To implement the backwards compatibility, the code just transforms
inherits:
!include foo.dts
into
inherits:
- foo.dts
and treats 'inherits:' similarly to 'include:'. Previously, !include
inserted the contents of the included file instead.
Some more sanity checks for 'include:'/'inherits:' are included as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The 'category: required/optional' setting for properties is just a
yes/no thing. Using a boolean makes it clearer, so have
'required: true/false' instead.
Print a clear error when 'category:' is used:
edtlib.EDTError: please put 'required: true' instead of 'category:
required' in 'properties: foo: ...' in
test-bindings/sub-node-parent.yaml - 'category' has been removed
The old scripts in scripts/dts/ ignore this setting, and only print a
warning if 'category: required' in an inherited binding is changed to
'category: optional'. Remove that code, since the new scripts already
have the same check.
The replacement was done with
git ls-files 'dts/bindings/*.yaml' | xargs sed -i \
-e 's/category:\s*required/required: true/' \
-e 's/category:\s*optional/required: false/'
dts/binding-template.yaml is updated as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update the ADC bindings to include #io-channel-cells and update the
related dts files to set #io-channel-cells.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a write_phandle_val_list() function for handling GPIOs, PWMs, and IO
channels. The logic is the same in all cases.
This also indirectly makes pwm-names and io-channel-names work the same
as gpio-names. Previously, they were ignored.
Also add a long explanation with example output.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
