The packet can be referenced somewhere else and letting the newly added
L2 header will generate corrupt packet. If the same packet is being
resent, ethernet will add again its L2 header. Thus the need to remove
such L2 header every time a packet has been sent, successfully or not.
Fixes#12560
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commits adds a new MQTT transport. The purpose is to be able to
connect to a MQTT broker through a SOCKS5 proxy.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commit fixes compilation warnings if user disables
CONFIG_NET_IPV4, CONFIG_NET_IPV6, CONFIG_NET_TCP and
CONFIG_NET_UDP.
E.g Samples like packet-socket doesn't need above configuration.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Implemented via Zephyr's net_hostname_get(). As support for that call
is configurable and by default off, while many POSIX applications
assume that hostname is always available, we need a default value
in case CONFIG_NET_HOSTNAME_ENABLE is "n". Initial version of this
patch added that on the level of gethostname() call, but of was
suggested to move that down to net_hostname_get() instead.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is possible to set the filter in user application and that
information is passed to the CANBUS device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the value 0 is a valid network interface index, we cannot use
unsigned value for interface index as that would not allow to
distinguish an invalid value. So make interface index a signed
8-bit value which is ok as we do not expect to have more than 127
network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function did not take the address family into account
when printing protocol name. The protocol value depends on
address family.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds packet socket support to socket api.
This version supports basic packet socket features.
Protocol family is AF_PACKET, type of socket is
SOCK_RAW and proto type is ETH_P_ALL. The user will
receive every packet (with L2 header) on the wire.
For TX, the subsystem expects that the user has set
all the protocol headers (L2 and L3) properly.
Networking subsystem doesn't verify or alter the headers while
sending or receiving the packets. This version supports packet
socket over Etherent only. Also combination of other family
and protocols doesn't work (i.e. Application can not open
packet-socket and non packet-socket together).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If packet family is AF_PACKET and CONFIG_NET_SOCKETS_PACKET
is enabled, just handover the packet to driver for sending.
L2 layer will not touch AF_PACKETs at the moment.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_SOCKETS_PACKET is enabled, then feed the packet
to net_packet_socket_input() for processing. It will search
for the net_contexts and if proper handler is found, pass
the packet to connection handler.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit adds basic packet socket support to net_context and
allows application to receive or send network packets in raw
format.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As we are adding more protocol families and protocol types
to connection handlers, some values might be same across
different types. Current connection handler only stores
proto type to match the handler, which is not enough if
we add more types. Also combination of family and types
may vary too. So adding family to connection handler to
figure out best match.
Also changing proto variable in net_conn from u8_t to u16_t.
net_context has 16 bit proto.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When creating net_pkt, the default value of net_pkt data_len was
set to zero. In case of RAW sockets, when family is AF_PACKET,
the data_len will be zero as there is no higher level protocol
information. So in this case, the default value of data_len
must be set to interface MTU
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The return value of net_if_get_link_addr points to a struct net_linkaddr
instead of to the raw MAC address. Without this fix the source address
will always end in 06:03 and will most likely be the same for different
boards running the same software.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
A few cases were missed where we weren't cleaning up the existing
connection correctly. This was easily missed because we try and
clean up the connection everywhere.
Instead, let's clean up any existing connection prior to starting
a new one in the do_bootstrap_reg() and do_registration()
functions.
Signed-off-by: Michael Scott <mike@foundries.io>
- Fix enum naming throughout
- Correct next_instance logic
- Move to registration server if no bootstrap server is found
- Fixes to logging
Signed-off-by: Michael Scott <mike@foundries.io>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of Ethernet, if the requested size is larger than MTU and if
AF_UNSPEC is provided, the allocator will need to take into account
the ethernet header size which is not accounted in the MTU.
Other current L2 do not follow that rule as their MTU is based on IP
one (IPv6 most of the time). What they declare as MTU is the full frame
size they handle (minus the FCS for instance in 15.4). So with
AF_UNSPEC, such assumption on L2 header size is unrelevant.
(On 15.4 the header size is variable anyway and cannot be known until
the frame is parsed).
Fixes#12982
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This was forgotten modification as commit 93e5181fbd came in master
though commit 0d519f7bcf was already written.
Thus fixing the missing lock/unlock.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that net_pkt are accessed through a common r/w API, using below a
net_pkt_cursor, let's have an option that will reset this cursor once
the net_pkt is freed.
Result is instead of segfaulting on r/w access, these operations will
bail out properly. Subsequent, and logical (unless you have a leak
which is another issue) net_pkt_unref will tell you who/where the pkt
was freed. Without it, you will get a segfault for instance, but that
won't tell you the exact reason. This options can help you then.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only next to be removed functions like net_tcp_set_checksum() are left
untouched. All the rest is switched.
Adding net_tcp_finalize() to follow the same logic as for UDP and else.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This proovse to drastically reduce runtime overhead as it does not need
to parse IP nor TCP header all over again in a lot of places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As these were parsed already by IPv4/6 input functions let's use them.
Applying the change on trivial UDP usage. TCP usage will have its own
commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These will be specifically needed in TCP, as well as being used in
context internally.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since the rework of L2/L3 split, only L2 has access to its header. Thus
up to Ethernet one to set LLDP PTYPE.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This optimizes the memory quite a bit since we do not need to clone nor
split the original packet at any time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of the code had to be reworked due to the new API: it's more
logical to do everything sequentially (first headers, then MLD part)
than the contrary with inserting headers at the end.
Using get_data/set_data as well it makes the code clearer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, return a verdict instead of a pointer to net_pkt. It's simpler as
it will be up to net_send_data()'s caller to unref the net_pkt in case
of NET_DROP: less places where net_pkt can be unref.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
Introducing a generic struct to acces the common part of MLD queries,
instead of accessing part by part.
Also, returning NET_OK in case parsing went fine. We send an MLD report
anyway, so it's not a good idea to count the message as being dropped in
statistics.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
This part was heavier to change as it was not accessing the headers
directly but instead was read parts by parts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Reworking the logic to reduce the amount of variables.
Also taking the opportunity to normalize drop messages.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In nbr part, this is a useful information. Since net_icmpv6_input has
already parsed the icmpv6 header, let's get pass it, instead of
retrieving/parsing it again in various handler functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And let's use net_ipv6_create, net_icmpv6_create, net_ipv6_finalize to
factorize the code better.
Removing useless setup_headers private function now.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And let's use net_ipv6_create, net_icmpv6_create, net_ipv6_finalize to
factorize the code better.
De-clutter the code by reordering where src/dst are evaluated.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And let's use net_ipv6_create, net_icmpv6_create, net_ipv6_finalize to
factorize the code better.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unlike before, we allocate a new packet for the reply which is a
modified clone of the request.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV6_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new net_pkt API to proceed through IPv6 header and all the
extension header as well.
Use udp/tcp input functions relevantly, and call net_conn_input
afterwards.
Note: This commit temporarly disable IPv6 fragmentation support
in the code directly. Which support will be re-enabled afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is pretty much the same as in ICMPv4. Actually, when it comes to
the ICMP header, it could probably be put in a common places for both
ICMPv4 and ICMPv6.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Extension headers are specific and use nexthdr attribute from net_pkt.
next_header_proto is the user protocol (if any) that might require
finalization too (calculating the checksum).
However, if there are extension header, we need to skip those and jump
to the position where the user protocol starts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also, store the actual next_hdr value and not it's position.
This permits to reduce net_pkt from some bytes.
Such field was unused until now, but it will be soon.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the IPv6 header. Once done, the cursor will be placed right
after the newly created IPv6 header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function names will be normalized then by the couple create/finalize.
This one only sets the checksum.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Verifying udp/tcp checksum should be done before calling this function.
Also, up to ipv4 and ipv6 to provide a pointer to their respective
header.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be the place where UDP header is parsed: its checksum verified
and src/dst ports grabbed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's now up to net_context to build the net_pkt and send it.
This will become the default.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not anymore up to user to provide the pkt. Context will build the
packet according to its metadata and provided buffer and length.
It currently supports only IPv4 and UDP.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unlike before, we allocate a new packet for the reply which is a
modified clone of the request.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV4_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function names will be normalized then by the couple create/finalize.
This one only sets the checksum.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As before, such header is meant to be in a contiguous area (beginning
of the buffer, only 20 bytes)
Opportunistically chaning the function name to net_ipv4_input() (all
will be create/finalize/input).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Newly received pkt can get their cursor intialized at net_recv_data()
(most of the time, drivers won't mangle with the content before calling
that function).
Right after l2 (net_if_recv_data()) parsing as well. L2s pull the
starting buffer after ll header. Instead of letting L2s updating the
cursor, it's simpler to reinitialize it directly after such parsing.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will avoid new API's writing functions to modify the packet's
content. For instance while checking its checksum etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new API where relevant. Only sam_gmac is left aside for now.
This simplifies a lot the code as the caller should only care about
allocating net_pkt and its buffer once, and thus will not need to mess
with "frags" etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is the easiest piece to change using the new API, and can be used
as showing how this API can be used.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the UDP header. Once done, the cursor will be placed right after
the newly created UDP header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the IPv4 header. Once done, the cursor will be placed right
after the newly created IPv4 header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These ones would support linearizing non-contiguous area, however
requiring a bit more complex type as an "accessor".
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a cursor into net_pkt. This is used to read/write data in a much
simpler way, for pre-allocated buffers in net_pkt. This avoids API users
to deal with net_buf below directly.
However, to be used - as for the new allocators - it will require deep
net stack core and API changes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These struct net_pkt allocators will give the possibility to allocate at
once the net_pkt and the buffer associated with, taking care of the
header space and MTU relevantly.
This enables to use the variable length allocator from net_buf. However,
it is not yet the default and is set as experimental.
As it is provided in parallel to existing allocators, it has to keep a
slab per-direction and thus a pointer in net_pkt, as well as appdata,
appdatalen etc... Resulting in "bloating" net_pkt. This will be solved
when, finally, former allocators will be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the net_app layer handled DNS support as a part of
network initialization. With the move to BSD-socket APIs,
we need to add support for DNS to the LwM2M library.
Signed-off-by: Michael Scott <mike@foundries.io>
This commit resets the firmware status to IDLE after a bad
download attempt. Previously, the firmware object would stay
in an odd state and any further attempts to download firmware
would return an error.
Signed-off-by: Michael Scott <mike@foundries.io>
We can save some resources by removing the periodic service thread
and replacing it by queuing the services to the work queue.
Before (reel_board using BT + DTLS)
Memory region Used Size Region Size %age Used
FLASH: 289464 B 1 MB 27.61%
SRAM: 75620 B 256 KB 28.85%
IDT_LIST: 136 B 2 KB 6.64%
After
Memory region Used Size Region Size %age Used
FLASH: 289576 B 1 MB 27.62%
SRAM: 74596 B 256 KB 28.46%
IDT_LIST: 136 B 2 KB 6.64%
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
For bootstrap support, we need to store connection credentials
in the security object. This way the client can start a connection
at index 0 and after bootstrapping, move to the next connection.
Let's add the needed fields and a config item to set the key length.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the parsing functions for JSON used by the JSON data
formatter and enable it in the LwM2M engine.
Signed-off-by: Michael Scott <mike@foundries.io>
The JSON formatter is currently not enabled for incoming WRITE
operations. To update the code in the formatter and not litter
the input context with extra data, let's allow formatters to
store their own user data.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
If the net_context functions are accessed from preemptive priority,
then we need to protect various internal resources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
After receiving FIN, the TCP stack will send a FIN and start
a timer to track the reception of the associated ACK. In case this
ACK is never received then the context will be released
without calling the associated received callback which leads to
upper layers not being informed that the connection was closed.
This issue was observed when using sockets, the effect is
that in this case the socket would never be closed and stay
in limbo forever.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
Reported by Github user himanshujha199640 using coccinelle:
subsys/net/lib/lwm2m/lwm2m_obj_device.c:172:5-16:
WARNING: Unsigned expression compared with zero.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/11135
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The "net iface" net-shell command printed "<unknown type>" for
OpenThread based technology. After this commit, the network
interface type is set to "OpenThread".
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The old and deprecated net-app based MQTT library is removed.
See the BSD socket based MQTT library for a replacement.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The previous commit replaced the net_pkt element ref with an element
atomic_ref. CI tests turned up more places where ref was used directly.
This commit converts them to use the new element.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
It has been observed that some network drivers, f.ex. the SAM E70 GMAC,
call net_pkt_unref from inside the interrupt that signals the successful
transmission of a packet. This conflicts with the net_pkt_unref call
made by ethernet_send after the packet has been given to the driver.
We fix this by using an atomic_t to hold the reference count as there
might be other, difficult to find cases of net_pkt_(un)ref being used
across threads and interrupts.
The name of the element has been changed from "ref" to "atomic_ref" to
cause a compile error when code still has not been converted to use the
atomic_* functions.
Fixes#12708
Signed-off-by: Daniel Glöckner <dg@emlix.com>
The implementation code itself should not rely on plain POSIX names
and use zsock_ and ZSOCK_ prefixed versions of symbols.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Mark automatically and statically configured mesh-local addresses
with mesh_local flag, so that they are not used as a source for
off-mesh destinations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit introduces a concept of mesh-local IPv6 addresses. Such
addresses should only be used for mesh-local communication, therefore
should not be used to communicate with different subnets (i. e.
destinations outside the mesh).
As `addr_type` field already holds different kind of information
(whether address was created automatically/manually) it was not used in
this case.
Instead a mesh_local flag was added, so that we do not lose information
on how address was created. Address with such flag set will only be
selected as a source address automatically if the destination address
is within the same subnet it belongs to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is the same as net_buf_pull(), except that instead of returning
the new buf->data it returns the old buf->data. This was recently
discussed in github issue #12562.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In OpenThread RLOC address and ALOC address are used for internal mesh
routing and should not be used by applications as they can change
dynamically during runtime. Therefore prevent registering them on Zephyr
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
struct timeval is per POSIX defined in sys/time.h, but that also
allowed to pull sys/select.h (and indeed, it does with native_posix),
which then starts to conflict with out select implementation (if
NET_SOCKETS_POSIX_NAMES is defined, and many samples/tests have it).
So, for now follow the existing route of duplicating all definitions
needed by our code in namespaced manner. Things like struct timeval
usage will need to be revisited later, when we'll want socket
subsystem to work with POSIX subsystem, but that's a separate deep
matter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's implemented on top of poll() anyway, and the current
implementation of fd_set uses array of fd's underlyingly, which
leads to O(n) complexity for FD_SET() and friends.
The purpose of select() implementation is to allow to perform
proof-of-concept port of 3rd-party code to Zephyr quickly. For
efficiency, poll() should be used instead.
Fixes: #11333
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
OpenThread commissioner feature has extra stack requirements, hence
increase it in this configuration.
Fixes#12455
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Two issues identified with 6lo fragmentation for ieee802154 that broke
the communication:
1) ieee802154_fragment_is_needed function did not take 15.4 FCS size
into account, hence taking wrong decision in some cases.
2) set_up_frag_hdr was writing with wrong offset, which resulted in 6lo
bytes being overwritten by 15.4 header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Each time a successfully TCP connection is done, the number of dropped
TCP packets increases by 2. This is happens because when receiving an
initial SYN packet, or an ACK packet following a SYN+ACK packet,
NET_DROP is returned even if there is no error.
Fix that by replacing the two corresponding "return NET_DROP" by
"net_pkt_unref(pkt)" followed by "return 0".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
net_buf_linearize() used to clear the contents of output buffer,
just to fill it with data as the next step. The only effect that
would have is if less data was written to the output buffer. But
it's not reliable for a caller to rely on net_buf_linearize() for
that, instead callers should take care to handle any conditions
like that themselves. For example, a caller which wants to process
the data as zero-terminated string, must reserve a byte for it
in the output buffer explicitly (and set it to zero).
The only in-tree user which relied on clearing output buffer was
wncm14a2a.c. But either had buffer sizes calculated very precisely
to always accommodate extra trailing zero byte (without providing
code comments about this), or arguably could suffer from buffer
overruns (at least if data received from a modem was invalid and
filled up all destination buffer, leaving no space for trailing
zero).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Connecting to a non-open port causes connect() to hang forever.
This patch releases connect() to return error to the caller.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
Accepting broadcast echo request and replying to it could provide an
attack vector.
Fixes#12162
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Do not extra ref and then obscurely unref the packet inside
the statistics update function.
Actually, this extra ref/unref isn't needed here at all.
The packet is unreferenced only on a successful send, statistics
updating can be done before the unref in a clean and understandable way.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Try to catch the original caller of setup_gptp_frame() function
in order to see who is allocating buffers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The NET_LOG_LEVEL is enabled also when allocation debugging is
enabled but when net_pkt debugging is not. Thus we need to use
the CONFIG_NET_PKT_LOG_LEVEL when printing normal debug log
prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_frag_linearize() is just a wrapper for net_buf_linearize(). As
the latter was refactored to never return error, and instead just
return actual copied length, update the former and its usages too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't try to find "errors" in the values of dst_len and len params
passed to net_buf_linearize(). Instead, do what entails with the
common sense from the values passed in, specifically:
1. Never read more than dst_len (or it would lead to buffer
overflow).
2. It's absolutely ok to read than specified by "len" param, that's
why this function returns number of bytes read in the first place.
The motivation for this change is that it's not useful with its
current behavior. For example, a number of Ethernet drivers linearize
a packet to send, but each does it with its own duplicated adhoc
routine, because net_buf_linearize() would just return error for the
natural use of:
net_buf_linearize(buf, sizeof(buf), pkt->frags, 0, sizeof(buf));
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No declar 'count',Enable CONFIG_NET_DEBUG_HTTP_CONN will build error.
Using http_monitor_count replace count.
Fixed#12329
Signed-off-by: Frank Li <lgl88911@163.com>
shell_fprintf() doesn't work in callback handlers.
To fix that, set shell state to SHELL_STATE_COMMAND before using it.
Fixed: #12347
Signed-off-by: Frank Li <lgl88911@163.com>
Currently OpenThread commands have to be prefixed in the shell by "ot
cmd", for example "ot cmd state". With the new shell, it is possible to
remove one subcommand level and change it to "ot state".
At the same time validate the number of arguments using
SHELL_CMD_ARG_REGISTER and improve the help message.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following the introduction of the new shell, the OpenThread shell
wrapper is not well integrated. It outputs the answer to a command using
printk(), which is not necessarily using the same device than the shell
if "zephyr,console" does not match "zephyr,shell-uart".
OpenThread calls the otConsoleOutputCallback() function to output the
answer to the shell. It can provide a callback argument, but defined
when OpenThread is initialized, not when the command is submitted.
Workaround that by taking a copy of the shell argument in a static
variable and use it for the call to shell_fprintf(). It is not perfect
if two or more shells issue concurrent commands, but is already an
improvement compared to printk().
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Introduced by commit id de78a7af28.
If the sum is 0xffff, a ~sum will give 0.
Fixes#12164
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The patch allows to enable logs for NET_RAW configuration.
For example using wpanusb currently breaks build with logging enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When walking through the coap resources in coap_handle_request, return
-EPERM if a resource exists but does not have the request method. This
allows the caller to catch the error and return a 4.05 message.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix misspellings in documentation (.rst, Kconfig help text, and .h
doxygen API comments), missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The slab2str function which is used in the debug log call is not defined
unless NET_LOG_PKT_LOG_LEVEL >= LOG_LEVEL_DEBUG.
It looks like this change was accidentally introduced in #11374.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
Currently there is a mixed approach in prefixes from mbedTLS
configuration (MBEDTLS_ and TLS_). The latter was used in generic config
file and could bring up confusion that it can only be used with TLS
subsystem. Hence unify the approach to MBEDTLS_ prefix to avoid such
confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Moving towards serialized fragmentation, adapting mac command creation
to avoid the need of ll_reserve etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will permit to avoid the need for ll_reserve.
It also removes net_buf allocation and deletion, as it works per-frame.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fragmentation has nothing to do with 6lo. Up to the bearer to do so.
This change is required for futur serialization of 15.4 fragmentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ll reserve is of no use as the l2 is allocating what it needs for
filling in its header.
This is another step forward to removing ll reserve concept.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-shell "net allocs" command should print network buffer
allocations even if network packet debugging is not enabled.
This is how it used to work earlier but the behaviour got lost
at some point. So user needs to set CONFIG_NET_DEBUG_NET_PKT_ALLOC
in order to see the buffer allocations. The option will be enabled
by default if network packet log level is set to DBG.
The reason for a separate option is that the network packet debug
logging prints just too much data and it is very difficult to
track allocations when that happens.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As extend fdtable usage to more cases, there regularly arises a need
to forward ioctl/fcntl arguments to another ioctl vmethod, which is
complicated because it defined as taking variadic arguments. The only
portable solution is to convert variadic arguments to va_list at the
first point of entry from client code, and then pass va_list around.
To facilitate calling ioctl with variadic arguments from system code,
z_fdtable_call_ioctl() helper function is added.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make sure that the link delay (propagation time) is calculated
same way as how Avnu/gptp is doing it with checks for rate ratio.
This is done like this in order to behave same way as their gptp.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is useful info as otherwise we get no indication to user
if the packet is not created and not sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neighbor rate ratio cannot be 0 as that would mean 0 packet
delivery time which is not plausible.
Add also some debugging to print current neighbor propagation
delay value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pdelay_allowed_lost_resp_exceed_count was updated even if we
had received pdelay response.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
All IPv4 destination address related drop reasons in one place.
This helps also to have one unique call of net_conn_input().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for IPv4, net_conn_input() can be called at one place for udp/tcp.
It will anyway check if given protocol is enabled so no need to check
such support here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was weird to pre-parse ICMPv6 headers in IPv6. Moreover parsing
failure of such header would not generate the right statistic.
Instead, centralizing all into net_icmpv6_input relevantly, and adapting
the test cases which were using that function. In RPL test, removing the
dummy dio test was simpler since dio is anyway tested later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Increase the net_buf length in proper places. So when gPTP
header is added, increase the buf->len properly, and then
when gPTP packet type is added, increase it again properly.
This way the net_buf length is updated in more logical way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If relevant configs are not enabled shell allocs command would print
wrong info:
"Enable CONFIG_NET_DEBUG_NET_PKT to see allocations"
CONFIG_NET_DEBUG_NET_PKT is obsolete and an undefined symbol, setting it
causes cmake to fail. This patch fixes this issue by printing up-to-date
information on how to enable allocs command
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
This commit reworks socket poll implementation to support multiple
socket implementations.
To achieve that, two ioctl poll helper requests were added:
ZFD_IOCTL_POLL_PREPARE and ZFD_IOCTL_POLL_UPDATE. The poll
implementation calls ioctl with these requests for each socket
requested in the fds table.
The first request is responsible for preparing k_poll_event objects
for specific socket. It can request to skip waiting in k_poll by
returning EALREADY through errno.
The latter request is responsible for processing outcome of k_poll for
each socket. It can request to retry the k_poll by returning EAGAIN
through errno.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement extended socket vtable for TLS sockets, therefore allowing to
integrate the implementation with socket subsystem.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit extends socket vtable, allowing to redirect socket calls to
alternate implementations (e.g. TLS sockets).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The state2str() function should only be used if debugging
is enabled thus add some pre-processor checks there.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print function and line number when changing state and when
debugging is enabled. Otherwise it is a bit difficult to follow
the program logic and locate the state change operation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the msg parameter for PRINT_INFO() is always a const string
that is not coming from stack, there is no need to use
log_strdup() here. This helps to avoid the
"<log_strdup alloc failed>" messages.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Common statistics should be updated in one centralized place and
ethernet_send is the right place for tx stats, as well as ethernet_recv
for rx stats.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just recalculate the chksum without resetting its value to 0, and test
if return value is 0.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net_dhcpv4_stop() function stops the event listener for any IF_UP
events previously. In case multiple interfaces are used and optionally
being switched over, it could result in disabling dhcp unintentionally.
The callback is initialized at the init function and added/removed in
the start/stop function based on the interface list being empty
or not. (first added, last removed)
The event handler checks if the interface is in the list before acting
on it.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
In case "net_dhcpv4_stop(..) is called when the interface is
in NET_DHCPV4_RENEWING state, the address is not removed.
When deleting the address in the NET_DHCPV4_RENEWING state
means the status is always equal to the moment before _start
is called.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
No need to store/reset/recompute the chksums, only compute it again and
if it's not 0: drop the packet.
RFC 1071:
"To check a checksum, the 1's complement sum is computed over the
same set of octets, including the checksum field. If the result
is all 1 bits (-0 in 1's complement arithmetic), the check succeeds."
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4, ICMPv4/6, UDP, TCP: all checksums are meant to be one's complement
on a calculated sum. Thus return one's complement already from the right
place instead of applying it in each and every place where
net_calc_chksum is called.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add missed out helper functions to update the errors.tx and error.rx
in the stats structure.
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
1. Clarify message telling that the actual packet length fed by the
driver differs from what specified in IPv4 header, and that leads to
drop.
2. Debug log any dropped packets in general.
These changes come from the experience of developing a networking
driver, where figuring out why packets get dropped may require
quite a head-scratching.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive extra data at the end of the IP message, then
discard that data and accept the packet.
Fixes#11649
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Such sent flag is in a union in net_pkt, shared with a gptp flag.
Tweaking it when the family is not AF_INET or AF_INET6 will generate
corrupted gptp packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of redoing what Ethernet L2 already does, let just create the
gptp message without any Ethenet header. Which one will be done as
sending phase by Ethernet L2 relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.
Applying changes to Openthread L2 as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that sending is done at last time, in one pass, no need to go
through net_if_send_data here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, first part is done in L2's send, then the next one in
ethernet device driver net_if send function. That last one was already
moved to a L2 based implementation. Let's just move forward and place
the whole logic of the L2's send in that second function.
This is the first step, ethernet centric only, to move towards a
one-pass sending logic in net stack. In future, net_if's send will
disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current code generating Ethernet header is scattered all over the place,
sometimes in functions that are supposed to check something (and not
filling the header). Not to say about innefficiency.
Src ll address does not need to be set in L2 as net_if.c handles that
already.
Broadcast dst ll address is the same in ipv4 or ipv6, thus factorizing.
In each case, multicast is filled in only at the relevant place.
This is the first step towards changing L2 sending logic, when L2 send
API function will be the only point of sending. The redirection from
driver to L2 again (which finally uses the right device API function to
send) it a temporary hack.
This simplifies the code but will also enable using statically
allocated net_buf and ethernet header payload buffer afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is currently unoptimized, as all frags are allocated with relevant
ll reserve for such header space. However, this is the first step
towards getting rid of that ll reserve concept everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
MQTT packet_length_encode function accepts NULL buf argument, therefore
it cannot be dereferenced without a check.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
mqtt_connect was not releasing mutex after successfull connection.
Reworked the code to have a single exit path with mutex unlock.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
net_udp_get_hdr() function returns NULL on failure. Therefore
handle its return value to avoid potential NULL dereference.
Fixes#11485
Coverity-CID: 189738
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
The _net_app_sprint_ipaddr() was calling log_strdup() when
creating the debug print string. This is not correct as
the log_strdup() can only be used when calling the logging macro
to print strings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As per RFC1112 sec 6.2 "A host group address must never be
placed in the source address field or anywhere in a source
route or record route option of an outgoing IP datagram."
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If ARP Request with sender IP address set to localhost then drop
the request.
Fixes#11489
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If network stack found ARP entry for peer address, then it
tries to send pending IP packet. But it always keeps ptype
as ARP only. In this particular scenario it has to be IP
packet.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Networking stack sometimes try to find source address based
on destination address. If interface could not find best match
then it returns unspecified address (0.0.0.0). Host should not
send these packets.
IPv4 reply related issues fixed.
Fixes#11329
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Implements setsockopt() for the socket offload driver
to process the TLS tags sent in via the Zephyr setsockopt() API,
when CONFIG_NET_SOCKETS_SOCKOPT_TLS is chosen.
For each tag, the credential filenames are retrieved and
set via SimpleLink's sl_SetSockOpt() API.
Also, creates a new KConfig option for TLS_CREDENTIAL_FILENAMES.
This new option is used by apps/protocols to add TLS credentials
via filenames referring to the actual content stored on a secure
file system or flash.
Handles the IPPROTO_TLS_* socket protocol families in the
socket() offloaded API.
This was validated on the cc3220sf_launchxl with the http_get sockets
sample, with the globalsign_r2.der file loaded to secure flash via
the TI Uniflash tool, and using the TI Catalog of known good
root CA's.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
net_rpl_get_interface() function which returns always NULL is
defined if NET_RPL is not enabled. so remove deprecated tag to
this particular function. Otherwise it will cause unnecessary
compilation warnings.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Two separate folders and Kconfig options causing confusion on
CoAP and CoAP_SOCK implementations. This patch simplifies it.
Current CoAP Kconfig option moved to COAP_NET_PKT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When resending data, we need to always check pending status first.
If the pending check returns an "expired" status, avoid sending the
data to L2 network driver entirely.
This change fixes a use after free issue, where the L2 network driver
was still handling a packet that was expired out from under it when
the pending status was checked.
Signed-off-by: Michael Scott <mike@foundries.io>
During firmware transmit timeout, we rely on the pending packet data to
reconstitute the token and token length. At this point the pending
structure may be cleared out due to multiple retries. To avoid getting
a zero token, let's use the token data from the original msg structure
instead.
Signed-off-by: Michael Scott <mike@foundries.io>
We are using msg->cpkt.pkt as the net_pkt pointer in the call to
net_app_send_pkt(). Let's keep the code clean and not expose
ourselves to "out of order" issues, by also using msg->cpkt.pkt
in the error handling unref call.
Signed-off-by: Michael Scott <mike@foundries.io>
During the retransmit cycle we take ref on the outgoing packet,
only to immediately unref it. Originally, this was to make sure
the net_context handling didn't get rid of the packet when
sendto() is called. But after checking, the ref counter is never
in danger of going to 0 at this point in the code, so the
added ref handling is useless.
Signed-off-by: Michael Scott <mike@foundries.io>
Add some extra space to the color resource buffer, to allow more
exotic and application-specific color spaces.
Signed-off-by: Marti Bolivar <marti@foundries.io>
File descriptor I freed automagically when using POSIX subsystem's
close() function, but any subsys-adhoc functions like zsock_close()
should do that explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add new, socket based MQTT implementation, based on MQTT from Nordic
nRF5 SDK, introducing the following features:
* transport independent MQTT logic, with support for multiple transports
* support for multiple MQTT versions (3.1.0 and 3.1.1 supported)
* single event handler - no need to keep callback array in RAM
* automatic send of Ping Requests, for connection keep-alive
* message/event parameters wrapped into strucutres - easier extension
for future MQTT versions
* no separate thread needed to run MQTT - application only needs to call
mqtt_input and mqtt_live periodically
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With FD table introduction, net_context can no longer be reached by
typecasting socket descriptor. Instead, file descriptor API have to be
used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ztls_setsockopt and ztls_getsockopt returned error codes instead of
setting errno in particular cases. This commit fixes it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In earlier commit 15e7e3ea4 ("net: ip: Split debug prints into
smaller pieces"), the net_pkt debug prints were split to two
lines because of the argument count limitation in logging system.
As the logging subsystem increased the limit count in
commit 62d011549a ("logging: Support for up to 15 arguments in log
message") we can restore the original version as it is easier
to read.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Pass the promiscuous mode OFF event properly to device driver
instead of just toggling the network interface flag.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Flush the promiscuous queue after all the clients have turned
off promiscuous mode. This makes sure that we do not leave any
RX packets hanging on the queue and waste memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ARP header contains invalid fields then drop the packet.
Fixes#11257Fixes#11254Fixes#11253Fixes#11248
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Introduce new Kconfig option for selecting either slip or ethernet
connectivity to host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Verify incoming ARP packet hardware and protocol type. Drop
unknown type of packets.
Fixes#11215Fixes#11217
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
FD method tables contain function pointers, and thus should be
const and reside in ROM. This patch fixes all cases of FD vtable
definitions: for POSIX FS API and for sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we change the ethernet MAC address, then we must also remove
the old IPv6 interface identifier (iid) address from the
interface. Otherwise there might not be enough space in the IPv6
address array for the new iid address and beside the old iid
address is not useful any more after the MAC address is changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv4 specific functions are callable even if
IPv4 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that IPv6 specific functions are callable even if
IPv6 is not enabled. This allows use of IS_ENABLED() macro
in other parts of the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to evaluate what's the ll reserve size here as net if has a
function to do so.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the destination IPv6 address is interface local scope multicast
address FF01::, then loopback those packets back to us as that is
the purpose of those addresses. They are to work same way as
localhost unicast address. See RFC 3513 ch 2.7 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 is disabled, then we can skip IPv6 checks and avoid
Coverity warnings. Same thing for IPv4.
Coverity-CID: 189506
Fixes#11100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously the "socket file descriptors" were just net_context
pointers cast to int. For full POSIX compatibility and support
of generic operations line read/write/close/fcntl/ioctl, the
real file descriptors should be supported, as implemented by
fdtable mini-subsys.
Socket implementation already has userspace vs flatspace dichotomy,
and adding to that ptr-fds vs real-fds dichotomy (4 possible cases)
is just too cumbersome. So, switch sockets to real fd's regardless
if full POSIX subsystem is enabled or not.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that ICMPv6 checksum is correct before continuing
processing the packet.
Fixes#10971
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with organisation scope multicast
address FF08:: then we must drop it as those addresses are
reserved for organisation network traffic only.
Fixes#10961
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with site scope multicast
address FF05:: then we must drop it as those addresses are
reserved for site network traffic only.
Fixes#10960
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with interface scope multicast
address FF01:: then we must drop it as those addresses are
reserved for local network traffic only.
Fixes#10959
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For Bluetooth, the link address is set only after the Bluetooth
connection is established. Because of this, place the link address
check to net_if_up() because at that point the link address should
be set properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There's a lot of code which assumes net_if_get_link_addr(iface)->addr
Forgetting to set it leads to deferred, spectacular crashes. It's
impractical to assert it on every usage. So, instead let's assert
it after call to driver->init(), as that is supposed to set it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixes following warning:
...
subsys/net/lib/dns/llmnr_responder.c:24:0:
subsys/net/lib/dns/llmnr_responder.c: In function ‘recv_cb’:
include/net/net_pkt.h:1203:9: warning: ‘addr’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
return net_pkt_append(pkt, len, data, timeout) == len;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
subsys/net/lib/dns/llmnr_responder.c:306:14: note: ‘addr’ was declared
here
const u8_t *addr;
^~~~
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes warning:
warning: ‘ipv6’ defined but not used [-Wunused-variable]
static struct net_context *ipv6;
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We must drop packet that is received from outside and which has
IPv6 loopback address (::1) either as a destination address or
source address.
Fixes#10933
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CoAP library is migrated to support over socket based
applications or other higher layer protocols. Most of the
API's and functionality is kept as it is except few changes.
net_pkt/net_buf is removed from CoAP library. Now it expects
a pre-allocated flat buffer and length. If there is not enough
space to append any data, library simply returns an error.
It's user's responsibility to allocate and free memory.
One change in functionality is, earlier coap_pending_clear()
used to clear the memory, but now it's user's responsibility
to free the memory.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ICMPv4 checksum is not optional and thus cannot be zero. Hence, drop
packet with invalid zero ICMPv4 checksum.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
If we receive an IPv4 that has broadcast destination address, then
properly handle it.
This means that for
* ICMPv4, if CONFIG_NET_ICMPV4_ACCEPT_BROADCAST is set (this is the
default value) and we receive echo-request then accept the packet.
Drop other ICMPv4 packets.
* TCP, drop the packet
* UDP, accept the packet if the destination address is the broadcast
address 255.255.255.255 or the subnet broadcast address.
Drop the packet if the packets broadcast address is not in our
configured subnet.
In sending side, make sure that we do not route broadcast address
IPv4 packets back to us. Also set Ethernet MAC destination address
properly if destination IPv4 address is broadcast one.
Fixes#10780
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function that returns true if given IPv4 address is
a broadcast address. This will be used in later commits to check
received packet IPv4 source and destination addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove extra ntohl() calls when checking IPv4 address against
a subnet address.
Convert also the IPv4 address to be const as the netmask related
functions do not change its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Cache the used transport protocol in net_pkt. This way we can
avoid traversing IP header to get the last protocol in network
packet. This is mostly an issue in IPv6 which can have a long
list of extension headers after IPv6 header and before the
transport protocol header.
Fixes#10853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the wifi shell needed to remove the quotes from the
SSID parameter, passed in by the underlying shell.
The new shell is now able to parse quoted strings as arguments,
so this adjustment can be removed.
Otherwise, it results in a failure to connect to an AP, as the first
character of the SSID name is stripped off.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Wrong Kconfig template was used for max debug level which caused
the max level to be the default level (ERROR). This prevented
all debug prints from showing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_buf log level Kconfig setting was using template from
networking, which might not be available for Bluetooth code.
This caused the log level to be ignored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The maximum log level was using wrong template which caused
the max value to be ignored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CONFIG_NET_DEFAULT_LOG_LEVEL template entry was only partially
fixed earlier and some spaces were not there around "=".
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current TLS socket implementation assumed that PSK ID stored in
credential manager is NULL terminated. It's actually better to store
only the string content, as the string length is stored as well. This
approach is less confusing, when a user is not operating on C strings
but on a non-NULL terminated byte array.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When DBG level for CONFIG_LWM2M_LOG_LEVEL is disabled, a compiler
warning is generated:
In file included from include/logging/log.h:11:0,
from subsys/net/lib/lwm2m/lwm2m_engine.c:28:
subsys/net/lib/lwm2m/lwm2m_engine.c: In function ‘engine_add_observer’:
subsys/net/lib/lwm2m/lwm2m_engine.c:558:3: warning: implicit
declaration of function ‘sprint_token’
[-Wimplicit-function-declaration]
sprint_token(token, tkl), lwm2m_sprint_ip_addr(addr));
^
Let's remove the #if guards around sprint_token() and let
the Linker remove it when not needed.
Signed-off-by: Michael Scott <mike@foundries.io>
It is possible that connect callback is called when shell is not
yet set. Make sure to check this and fallback to use printk() if
shell_printf() cannot be used.
Fixes#10617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The connect command parameters were not checked properly if
user decided to supply only mandatory parameters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the device does not support wifi offloading, then return -ENOTSUP
so that wifi support can be enabled for testing purposes even if
the actual device does not have wifi support. This is happens for
example in qemu which does not support wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we define and declare the _net_app_register() and
_net_app_unregister() functions properly if net_app logging level
is set to debug.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Typo when calculating new value for local_time_n.low, the calculation
was just a constant expression and the value was not modified.
Coverity-CID: 188759
Fixes#10568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The connection index was printed incorrectly in debug print.
Coverity-CID: 188742
Coverity-CID: 188753
Fixes#10583#10574
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes the compile error when CONFIG_NET_PKT_LOG_LEVEL
is LOG_LEVEL_DBG.
> subsys/net/ip/net_shell.c: In function ‘context_info’:
> subsys/net/ip/net_shell.c:2893:106: error: ‘struct net_buf_pool’
> has no member named ‘avail_count’
> subsys/net/ip/net_shell.c:2893:125: error: ‘struct net_buf_pool’
> has no member named ‘name’
In struct net_buf_pool, 'avail_count' and 'name' are depends on
CONFIG_NET_BUF_POOL_USAGE.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Check for NULL IPv6 addr values from net_if_ipv6_get_ll() in rpl.c
If NULL, print out an error statement stating that no proper IPv6
address was found
Coverity-CID: 188169
Fixes#10094.
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Recently, the wifi net offload driver has been asserting
as init_iface() was checking for api->send != NULL, even in
the case of NET_OFFLOAD
This patch suggests a fix to handle the NET_OFFLOAD case.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Also, defines one LOG_MODULE_NAME for the simplelink WiFi driver, and
uses the same name for all files in this driver (module).
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
If we receive a valid gratuitous ARP request, then update ARP
cache accordingly. This feature is optional and by default
it is enabled, but can be turned off if needed.
This is similar to a feature available in Linux, and is enabled
by default in many distros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The wifi mgmt does only support TCP/IP offload wifi chip,
while non-offload wifi chip can not scan/connect to AP.
Signed-off-by: Dong Xiang <dong.xiang@unisoc.com>
Placing it at sys/fcntl.h was due to mimicking internal newlib's
layout, but what we need is this file at the standard location,
for reuse.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The wifi management interface was still using one SYS_LOG_DBG
macro call, replacing that with NET_DBG.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was trying to print peer IP address string but that
pointer could contain garbage. There is actually no need to print
anything in this case, the error code return is enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently logging subsystem supports quite small number of function
parameters. So split some long functions into smaller pieces.
Hopefully this is just a temporary patch and we can support more
parameters to logging macros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The last parameter is 'period', we should not pass duration twice.
Doing so makes zephyr hang with current mainline when it is chosen to be
the Grand Master.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Completely remove the last_sync_receipt_timeout time. It is not part of
the standard (see 802.1AS-2011, 10.2.11 for the complete list of
variables for this state machine). Additionally this extra variable was
never really initialized so the calculated duration made no sense.
Just start the timer based on the regular sync receipt timeout time
interval from the port data set.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commits adds a possibility to select PTP clock accuracy through
KConfig.
The chosen accuracy should reflect the capabilities of the used
hardware.
See IEEE 1588-2008, chapter 7.6.2.5 for more details.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implements GMCAP-1, GMCAP-2, and GMCAP-3 and their dependencies from
802.1AS-2011. See Annex A.10 for more details.
The Grand Master Capability can be turned on and off through KConfig.
Note: the correction field in FUP packets is not yet properly
calculated. There is a TODO left in the code, near which some parameters
are zeroed to make the correction field be set to 0. This mimics the
behavior of openAvnu (a Linux gPTP client). For full compliance the
field should be calculated and set properly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Optimize memory usage of enums that are used within structs.
Reorganize the affected structs to avoid holes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
SyncReceiptTime should use an ExtendedTimestamp (with fractional
nanoseconds precision). Add a struct with the definition of the needed
type and convert that variable.
The struct representing the ExtendedTimestamp is named
net_ptp_extended_time to keep consistency with the existing net_ptp_time
which is used for regular PTP timestamps.
See 802.1AS-2011 chapters 10.2.3.4 and 6.3.3.5 for more reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There are other ClockMasterSync state-machines (to be implemented).
Current name would either cause conflicts or be too ambiguous.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
In coap_option_value_to_int function, when coap option length is 4,
option->value[3] should be shifted by 0 rather than option->value[2].
This doesn't affect the behavior of function but needs to be fixed.
In coap_append_option_int function, when the value is between 0xffff
and 0xffffff(when option length is 3), bit shift operation is wrong.
For example, if the value is 0xABCDEF, by sys_put_be16(val, data)
data[0]=0xCD, data[1]=0xEF, by val >> 16, data[2]=0xAB. So the result
becomes 0xCDEFAB not 0xABCDEF. So, to sys_put_be16 function hand
&data[1] over instead of handing data over and val >> 16 needs to be
set to data[0], not data[2].
Signed-off-by: Taehwa Kang <hegrecomm@gmail.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
pkt properties should be set prior to routing.
If packet routing is turned on and the packet is
forwarded to an interface, the pkt properties like
ipv6_ext_len or ip_hdr_len will not be initialized.
If a UDP packet is forwarded to an 6lo interface,
it leads to incorrect calculation of UDP header
during UDP header compression (net_udp_get_hdr).
Fixes#10204
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the neighbour does not exists, then the route to it cannot
be deleted so we can return error to caller in that case.
Coverity-CID: 188173
Fixes#10090
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In net_route_add(), do not try to print route information if
route to neighbor is not found.
Coverity-CID: 188172
Fixes#10091
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the destination address to select the proper network interface
when binding. The default network interface cannot be used here
as then the packet might be sent to wrong network interface.
Fixes#9935
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There is now a proper function to select the right source IPv4
address when sending a mDNS packet so use it instead of selecting
the address directly from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sync timeouts were calculated incorrectly - this led to a 'Multiple
Masters Issue' as denoted by PTP debugging software.
See 802.1AS-2011, chapter 10.2.4.2 for reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Fix the formula listed in help messages which is used to calculate
actual intervals given their log2 values.
It is all calculated properly in the code, because the unit of the
actual field uses the UScaledNs type of which the unit is 2^(-16)ns, so
it is just the help messages that got it wrong.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
When no certificate-based ciphersuites are used, mbedTLS compiles out
hostname field and associated functions from its SSL context. This
resulted in compilation error when only PSK-based ciphersuites were
configured.
This commit resolves the issue by compiling-out hostname-related code
from secure sockets implementation on the same basis as mbedTLS does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The result of both printk and vprintk are not used in any place.
MISRA-C says that the return of every non void function must be
checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
sockets_tls subsystem uses entropy driver, yet it does not include
entropy header. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- Up to net_context to give the source port.
- net_udp_append is unused anywhere: let's remove it.
- left over macros on _raw versions removed as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch enables BSD socket offload to a dedicated
TCP/IP offload engine.
This provides a simpler, more direct mechanism than going
through NET_OFFLOAD (zsock -> net_context -> socket conversions)
for those devices which provide complete TCP/IP offload at the
BSD socket level, and whose use cases do not require
IP routing between multiple network interfaces.
To use, configure CONFIG_NET_SOCKETS_OFFLOAD=y, and register
socket_offload_ops with this module.
Fixes#3706
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Even though the net_buf implementation may (and does currently)
internally use u16_t for lengths, keep the public facing API
consistent by using size_t.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes the net_buf_append_bytes() API consistent with all other
net_buf APIs that take a pointer to arbitrary data.
Fixes#9283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add RX API to LLDP. Caller should register callback which is called
from ethernet_recv().
Fixes#9407
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The new "net ipv6" command which will print general IPv6 configuration
and information about autoconfigured IPv6 addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if_ipv6_prefix_get() function will return the proper prefix
for a given IPv6 address and network interface. This is used when
checking which source address should be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using sizeof() is a common best practice in C, because it allows to
adjust size in one place instead of many.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The gptp stack size was not properly set, one must use
the K_THREAD_STACK_SIZEOF() macro to calculate stack size.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For ease of maintenance, let's swap the reader/writer initialization
syntax to:
.put_begin = put_begin,
.put_end = put_end,
...
This way we only assign used fields and adding new ones later is
less error prone.
Signed-off-by: Michael Scott <mike@foundries.io>
We set "insert" to true when the value is already in the buffer, but
we need to insert a TLV to denote things like RESOURCE_INSTANCE or
OBJECT_INSTANCE. In this case, let's not re-add the value.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's implement put_begin/end_oi functions in the TLV formatter
so to mark the boundry of an object instance when more than 1
object instance is returned.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/9470
Signed-off-by: Michael Scott <mike@foundries.io>
In order to re-use the put_begin_ri / put_end_ri logic, let's create
generic functions for them: put_begin_tlv and put_end_tlv
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, we only save the resource id of the incoming path setting.
In the future, we will need to change other values in order to process
multi-instance READ operations.
Let's save and restore the entire path only at the beginning and end
of processing.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters may need to process data at the beginning and end of
each object instance and/or resource. Currently, they can only add
processing at the beginning and end of resource instances.
Let's establish put_begin/end_oi (object instance) and put_begin/end_r
(resource) API functions that data formatters can use for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Optimize the resource processing loop to avoid extra
assignments before checking if we need to process the
actual resource.
Signed-off-by: Michael Scott <mike@foundries.io>
When reading multiple instances, the base name value should not
include an object instance id. The object instance id is added
to the individual resource name values.
Accomplish this by saving the original path level and adjusting
the (base) name where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
The put_begin / put_end calls are to be used at the very beginning
and end of processing a READ op. Let's correct that logic.
Signed-off-by: Michael Scott <mike@foundries.io>
Now that formatters use their own private data to hold state,
let's remove the old member variables from lwm2m_output_context
which are now unused.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters have various private state variables which are
currently located in the output context structure. Let's add
a place where data formatters can store a pointer to their
private data so that as we add more formatters the output
context doesn't get cluttered up.
Signed-off-by: Michael Scott <mike@foundries.io>
The plain-text format only supports READ op for a specific resource.
In all other cases return NOT_ALLOWED.
Signed-off-by: Michael Scott <mike@foundries.io>
Data formatters are becoming too complex for a simple do_read_op()
function to handle all in one place. Also, more data formatters are
going to be added for LwM2M v1.1 support in the future.
In order for data formatters to perform internal setup or deny
invalid requests (specific to the formatter's logic), let's
establish do_read_op_* functions in each formatter.
Once the internal processing is done, they can call back into the
more generic lwm2m_perform_read_op function.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's correct the starting logic in do_read_op() to not assume
a default value of 0 will be present for the first object, when
reading multiple objects.
Signed-off-by: Michael Scott <mike@foundries.io>
The object instance list isn't sorted by object instance id. Let's
simplify this and fix the logic in lwm2m_next_engine_obj_inst() to make
sure that we always get the NEXT object instance by value of
obj_inst_id, not just the next object instance in the list.
NOTE: This change removes the "last" object instance pointer from the
parameters of lwm2m_next_engine_obj_inst(). Some of the logic to return
a NULL value for the end of the list has to be moved back into
do_read_op().
Signed-off-by: Michael Scott <mike@foundries.io>
Remove over-complicated match_type logic in do_read_op(). Replace
MATCH_* checks with actual path->level values.
Signed-off-by: Michael Scott <mike@foundries.io>
The ciaddr can be null in requesting state so do not try to print
it in that case.
Fixes#9575
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is similar to change which was done in 21f31e90ec, unfortunately
this case was missed.
Fixes: #9032
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The peers were not informed about DTLS connection close because
we removed DTLS context. The fix is to notify peers before we
remove the DTLS connection.
Fixes#8605
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
NET_CONN_CB() functional macro hides the parameters a function takes
and its return type. In #8723, it's proposed to remove that macro
altogether. Until that proposal is reviewed, at least provide real
protype in code comments to help people who read/analyze the code.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If a malformed packet with multiple HBHO is received by the Zephyr IP
stack it replies with ICMPv6 type 4 code 1: "Parameter problem
unrecognized Next Header type encountered". This ICMPv6 message has
wrong IPv6 payload length and ICMPv6 checksum.
RFC 8200 in chapter 4.1 states:
Each extension header should occur at most once, except for the
Destination Options header, which should occur at most twice (once
before a Routing header and once before the upper-layer header).
There are two possible solutions to the problem at hand:
1) Respond with ICMPv6 Parameter problem, in this case IPv6 length and
ICMPv6 checksum need to be fixed
2) Drop the malformed packet
This patch implements the easy solution - 2. Basically it changes the
code to drop the malformed packet instead of sending ICMPv6 type 4
code 1.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When processing an observe request we fail to check whether a
resource has the read permission set. Let's check and if it
doesn't return -EPERM.
NOTE: Also do diligence and return -ENOENT when an object field
cannot be found while looking for the permission.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/8286
Signed-off-by: Michael Scott <mike@foundries.io>
Due to a change in the company name, the LwM2M copyrights need
to be changed from "Open Source Foundries Limited" ->
"Foundries.io".
Signed-off-by: Michael Scott <mike@foundries.io>
These were at most set, but never used. They appear to be artifacts
of importing code from the FNET stack.
Addresses: #9570
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In TCP protocol, any packet is subject to retransmission if not
ACKed in expected time. Thus, any packet, including FIN (and SYN
for that matter) should be added to the retransmission queue.
In our case, despite its name, queue_fin() function didn't add
FIN packet to rexmit queue, so do that. Then, in
net_tcp_ack_received() which handles ACKs, make sure that we can
handle FIN packets: calculate its sequence number properly, don't
make adhoc adjustments to retransmission logic (it's handled
centrally in restart_timer() already), etc.
Fixes: #8188
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we run out of buffers and cannot create the TCP segment,
then handle it properly and do not access NULL pointer.
Coverity-CID: 187822
Fixes#9639
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is timeout when adding UDP data, then check this
condition and bail out by returning NULL as the packet is now
malformed.
Coverity-CID: 187825
Fixes#9636
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The previous code "optimized" and called both net_context_accept()
and net_context_recv() blindly to reset the corresponding callbacks.
But this leads to "wrong state" logging if debugging is enabled, so
clean that up.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Where we calculate max size, name variable (preprocessor define)
correspondingly.
2. Calling TCP/UDP an "app protocol" is original, use "next protocol"
terminology of IPv6.
3. As headers go as IP, then "next", order calculations that way too.
4. Add more comments.
Addresses: #8723
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CONFIG_NET_OFFLOAD was defined in Kconfig of net/ip/l2/, but actually
used by the code in net/ip/.
Fixes: #8646
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Spurious TCP retries were observed using Wireshark while continuously
sending TCP packets at an interval faster than the initial RTO.
If the send list is empty and CONFIG_NET_TCP_TIME_WAIT_DELAY is used,
the retry timer will not be correctly stopped when receiving a valid
ACK. As a consequence, the timer might be running when a new packet is
queued, but the logics in net_tcp_queue_data() will not restart the
timer as it is already running. This will make the retry timer to expire
prematurely, potentially while sending packets.
The nested condition is merged into a single condition, allowing the
final else clause to be reached when a valid ACK is received.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
The code was not working properly if there was multiple timers
that were triggered in different times.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The autoconfigured IPv6 addresses that are related to removed
prefix, need also removed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the IPv6 address expires, then it is marked as deprecated.
If a renewal is received in router advertisement, then the address
can be re-used again and is marked as preferred.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes. Just moved IPv6 fragment and related functions
to ipv6_fragment.c for better readability
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 MLD and related functions
to ipv6_mld.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes. Just moved IPv6 neighbor and related functions
to ipv6_nbr.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send ND reachable message and waiting for the reply in order to get to
the neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 ND reachable request timer by having one central k_delayed_work
and a timestamp in every IPv6 neighbor data entry properly handled at
every timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send NS message and waiting for the NS reply in order to get to the
neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 send NS request timer by having one central k_delayed_work and
a timestamp in every IPv6 neighbor data entry properly handled at every
timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The intention is to clean up the usage of net_sprint_ipv*_addr()
functions where 2 or 3 invocations are needed.
Thus, the default number of buffers is 3.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Thise uses the new net_pkt_append_memset() function to generate the
required zero filling instead of calling net_pkt_append_u8() in loops.
Fixes#9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Echo server crashes upon reception of fragmented packets. This
occurs when fragmentation is enabled with the default prj.conf
of echo server. The cause is that by default with logs disabled
net_sprint_ipv6_addr returns NULL.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There was one extra byte sent in last chunk which caused
this error to be printed by curl
* Illegal or missing hexadecimal sequence in chunked-encoding
* stopped the pause stream!
* Closing connection 0
curl: (56) Illegal or missing hexadecimal sequence in chunked-encoding
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'Network type' choice always defaulted to NET_RPL_L2_ANY, because
choices prefer the first default with a satisfied condition (this was
true even when Zephyr still had the prefer-later-defaults patch).
Swap the defaults so that NET_RPL_L2_IEEE802154 becomes the default if
NET_L2_IEEE802154 is enabled, as intended.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit adds checks to L2 and network support libraries.
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit only adds checks to core IP stack in subsys/net/ip
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There have a funtion mqtt_rx_unsuback defined but not used.
So add it into mqtt_parser and fix the missing case.
Fixes#8431
Signed-off-by: Xuan Ze <119524428@qq.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add system calls for the zsock implementations of socket,
close, bind, connect, listen, accept, sendto, recvfrom,
fcntl, poll, inet_pton, and getaddrinfo.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Originally EFAULT was used to indicate NULL pointer error in TLS option
set/get functions. EINVAL was suggested to be more apropriate error code
for this case, hence replace it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce non-blocking DTLS handshake, used during recv function call.
This prevents from blocking while waiting for initial handshake packet
on non-blocking sockets during receive.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make TLS poll function verify if decrypted data is available after
socket has notified activity with POLLIN flag. This prevents from giving
false notifications in case data was received on socket but was consumed
by mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Specify timeout value for mbedtls_ssl_read function for DTLS servers.
Adding this can prevent TLS context lockup in case blocking recv is used
and peer has shut down DTLS connection without closing it gracefully.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS recv/recvfrom function.
For DTLS client, recv function requires to have an already established
DTLS connection.
For DTLS servers, this function will try to establish DTLS connection
before receiving data. In case that DTLS handshake fails, recv function
will silently retry.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DTLS send/sendto function.
For DTLS clients, send function will try to establish DTLS connection
before sending data. If DTLS handshake fails, it will return an error.
For DTLS servers, send function requires to have DTLS connection already
established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
DTLS handshake can return MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED, which
indicate that TLS session context should be reset.
Also, store information whether TLS connection has beed established.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add binary IO functions for DTLS connections.
dtls_rx function is more complex than it's TLS counterpart due to fact,
that DTLS does not allow blocking operation for this function. A simple
timeout mechanism was implmented basing on the zsock_poll function.
This function also verifies peer address. As currently only a single
DTLS connection is supported on a socket, if a DTLS connection is
established, and we receive datagram from different peer, it is silently
dropped.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Functions for checking flags set on sockets are needed by TLS sockets as
well, therefore extract them to a separate header file to avoid code
duplication.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only socket option to set role for DTLS connection. This
option is irrelevant for TLS connections.
This options accepts and integer with a TLS role, compatible with
mbedTLS values:
0 - client,
1 - server.
By default, DTLS will assume client role.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After it sends SYN_ACK, there is a case that the client sends the packet
with both ACK and RST bits are set, and this packet needs to be handled
if the packet is valid.
CLIENT SERVER
------ ------
|--------- SYN -------->|
|<------ SYN_ACK -------|
|------- ACK_RST ------>|
|--------- SYN -------->|
|<-------- ??? ---------|
This patch checks the RST bits even if other flags are set and process
the packet.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
IPv6 cleanup patch introduced a regression. Misunderstood the logic.
Do not drop the packet if packet does not have ND options, just skip.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of reading or writing different icmpv4 header's individual
variables, better to read or write whole struct at a time. This
minimizes the calls to net_frag_read() or net_frag_write().
changes also removed slow and fast paths. Changes should optimize
the total flow.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This net_buf leak happends when we are low on available net_buf
count. During TCP segment preparation we do allocate IP header
successfully, but we fail to allocate TCP header. In such case
pkt->frags is not NULL anymore (it contains IP header), but we
override it during TCP header allocation error path. This results
in net_buf containing IP header to never be deallocated, because
it does not belong to any net_pkt anymore.
Use net_pkt_frag_add() function to add tail for future net_pkt
deallocation, instead of assigning tail to pkt->frags pointer.
Fixes: c6407659f3 ("net: tcp: Add the frag back to caller allocated
net_pkt")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Instead of reading or writing different icmpv6 header's individual
variables, better to read or write whole struct at a time. This
minimizes the calls to net_frag_read() or net_frag_write().
changes also removed slow and fast paths. Changes should optimize
the total flow.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the driver has created start() and stop() functions, then those
are called when ethernet L2 is enabled or disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv6 fragmentation splits the packet into two parts, one is header
and another is payload. Every time header is cloned and part of
payload is appended. At the end original header packet is not freed.
Causes memory leak.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current implementation only considers IP header length while setting
appdata value on a cloned packet. It will give bogus value if original
packet contains extension headers and if extension headers are large
(i.e. more than one fragment). Only consider appdata length from the
original packet.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The ethernet sending routine sent a corrupted ARP packet instead
of the actual IPv4 packet.
Fixes#9348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to inline the net_if_ipv6_addr_lookup_by_iface() function
as it is used multiple times in ipv6.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function which returns proper network interface to send either
IPv4 or IPv6 network packet to corresponding destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that will return the network interface that would
be used when sending a IPv6 network packet to specific IPv6 destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For example for Bluetooth IPSP, it is not needed to join solicited
node multicast group address.
From https://tools.ietf.org/html/rfc7668#section-3.2.2 :
"""
There is no need for 6LN to join the solicited-node multicast address,
since 6LBR will know device addresses and hence link-local addresses
of all connected 6LNs.
"""
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.
LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.
Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.
The commit adds NET_ETH_PTYPE_LLDP definition and related handling.
If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.
Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).
Fixes#3233
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M engine will cleanup the net_app_ctx if there are
errors during initialization. The clean up calls here in
RD client are duplicated.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that string to integer conversions are checked properly
so that we are not trying to use the return value from strtol()
if the string is not a number.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change moves the logic for linearize and append_bytes from
the net_pkt sources into the net_buf sources where it can be
made available to layers which to not depend on net_pkt. It also,
adds a new net_buf_skip() function which can be used to iterated
through a list of net_buf (freeing the buffers as it goes).
For the append_bytes function to be generic in nature, a net_buf
allocator callback was created. Callers of append_bytes pass in
the callback which determines where the resulting net_buf is
allocated from.
Also, the dst buffer in linearize is now cleared prior to copy
(this was an addition from the code moved from net_pkt).
In order to preserve existing callers, the original functions are
left in the net_pkt layer, but now merely act as wrappers.
Signed-off-by: Michael Scott <mike@foundries.io>
This are all the parameters defined by the standard (12.21.1).
Additionally the parameters that are read-only are validated in the
ethernet_set_config callback.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This commits adds new priority to traffic class mappings and allows
users to choose which mapping to use through menuconfig.
The new mappings are recommended in 802.1 (chapter 34.5) for
time-sensitive applications supporting the credit-based sharper
algorithm.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The dummy L2 does not setup the link layer address. Do not check the
source and destination link layer addresses when routing packets
otherwise packet routing will not work when using a dummy L2.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unspecified address 0.0.0.0 was used as a requested IPv4 address
because the ARP message was generated second time. So for IPv4
autoconf ARP message, generate the message only once.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allows ethernet drivers to provide vendor specific statistics
and details in the form of key-value pairs with the name of
the staticstic and its value.
The new string tables will be behind a new config:
NET_STATISTICS_ETHERNET_VENDOR
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
If a disconnection callback was registered, it is not called
as the check done in net_app is reversed. The disconnection callback
is not called if there are any inactive contexts.
The check should be on any active context.
Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Print information about supported hardware capabilities for
ethernet interfaces when executing "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ethernet mgmt is enabled and the driver supports priority queues,
show info about them including the Qav status
(enabled/disabled/unsupported).
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add calls responsible for getting and setting on/off status of Qav on
capable priority queues.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread L2 could've called multicast address registration multiple
times for specific address, which resulted in having multiple entries
containing the same multicast IPv6 address in Zephyr.
Checking if address was already registered prevents that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
No need to keep technologies in main L2 directory so for consistency
create a directory for each of them and place each L2 component to
relevant L2 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes use of the get_config callback added to the Ethernet API.
For now the only parameter to get is the number of available priority
queues.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This reduces memory overhead on net_if_dhcpv4: 16 bytes vs 120 bytes
before. This might proove to be beneficial when there are many network
interface.
dhcpv4 ROM consumption is now 2132 bytes vs 4224 (many switches removed)
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Empty line before if (unless test uses previous line assignment) and
after } (unless it's another } ...)
Indentation fixed as well.
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Pre-assigned are always coming first.
- Always declare at the beginning of a code block
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add write only TLS secure option to set peer verification level for
TLS connection.
This option accepts an integer with a peer verification
level, compatible with mbedtls values (0 - none, 1 - optional, 2 -
required.
By default, socket mimics mebdTLS behavior - (none for server, required
for client).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to read a ciphersuite chosen during TLS
handshake. Might be useful during development.
This is a read-only option that returns an integer containing an
IANA assigned ciphersuite identifier of chosen ciphersuite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option that enables to narrow list of ciphersuites
available for TLS connection.
This option accepts an array of integers with IANA assigned ciphersuite
identifiers and returns such.
By default, every statically configured ciphersuite is available for a
socket and getsockopt returns an array of these.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add write-only TLS secure socket option to set hostname.
This option accepts a string containing the hostname. May be NULL, to
disable hostname verification.
By default, an empty string is set as a hostname for TLS clients,
to enforce hostname verification in mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS secure socket option to select TLS credentials to use.
This option accepts and returns an array of sec_tag_t that indicate
which TLS credentials should be used with specific socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add TLS credential management subsystem that enables to register TLS
credentials in the system. Once specific credentials are registered in
the system, they will be available for TLS secure sockets to use.
To use a TLS credential with a socket, the following steps have to be
taken:
1. TLS credential has to be registered in a system-wide pool, using the
API provided in "net/tls_credentials.h" header file.
2. TLS credential (and other TLS parameters) should be set on a socket
using setsockopt().
Note, that there is no need to repeat step 1 for different sockets using
the same credentials. Once TLS credential is registered in the system,
it can be used with mulitple sockets, as long as it's not deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When an echo request is sent to an unknown neighbor, a Neighbor
Solicitation request is sent, however if the source address
cannot be determined the NS request is dropped but the pending
packet is not freed.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reduces the logic as well as the ipv4 header checksum needs to be
computed either way.
Fixes#8720
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use modular arithmetic in statistics prints so that wraparounds are
automatically handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to set the network interface to promiscuous mode
and query the promisc mode status.
Note that currently this is only supported for ethernet bearer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_DNS_RESOLVER is the master switch for DNS resolution support,
for both native and socket APIs. Avoid confusing link errors by
compiling out both dns_resolve_name() and getaddrinfo() if that
option is not enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We might access NULL pointer if strchr() return value is not
checked properly.
Coverity-CID: 187073
Fixes#8993
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that it is clear that we are suppose to fall through
a case statement.
Coverity-CID: 187078
Fixes#8989
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not overflow when creating UScaledNS
value for interval.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The advantage to this approach allows drivers for
devices that already keep statistics data on hardware
registers to use those instead, rather than try to
replicate it the same counters again within the driver
itself.
The eth_native_posix.c driver though do not benefit
from this, is modified to use the new callback system.
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
If Neighbor Advertisement cannot be sent, then print info about it.
Earlier we printed info when NA succeeded.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
During transfer of object data via OMA TLV format, we can
encounter resources which are optional or not handled in base
LwM2M engine. When these resources cannot be handled let's
read past them and continue on.
Signed-off-by: Michael Scott <mike@foundries.io>
Don't use hard-coded value of 4 for passing the # of options to
coap_find_options() in handle_request(). This can easily get
out of sync.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M engine now supports optional resources that may need to be
setup or torn down in user-based code during object instance
creation / deletion.
Let's provide callbacks that can be used for this purpose.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename lwm2m_engine_exec_cb_t to lwm2m_engine_user_cb_t so that
future user-code callbacks can make use of the same definition.
Signed-off-by: Michael Scott <mike@foundries.io>
Initial implementation of poll() was more of a proof of concept, so
was coded with a single-thread application in mind. As we move to
sockets as the main networking API, make it possible to use poll()
from different threads.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A condition can be but on a prompt to make a symbol conditionally
user-assignable (visible).
Kconfig note:
'default's don't care whether the symbol is visible (has a prompt with a
satisfied condition) or not. 'if'/'depends on' just puts the same
condition on all the properties, disabling both the defaults and the
prompt at the same time. That might make it look like they're connected.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Implement socket poll function for TLS socket. In addition to regular
poll checks, we have to check if there is some decrypted data pending on
mbedTLS.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add entropy source for mbedTLS. If no entropy driver is available, use
non-secure, software entropy source.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add tls_context structure that stored data required by TLS socket
implementation. This structure is allocated from global pool during
socket creation and freed during socket closure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add switch to a socket layer that will enable switching socket API to
TLS secure sockets. At this point there is no secure sockets
implementation, so secure socket calls redirect to regular socket calls.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Having 24 parameters in a debug print is a bit extreme especially
as it is causing warning from new logger. Split the debug print
to three pieces each having 8 parameters which is more reasonable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code did not check if the icmpv4 header struct is already
pointing to net_buf or not. This meant that the code did not
set the ICMPv4 options and types correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_addr_pton() did not check the number of ":" characters properly.
For example with following net-shell input
net ping fe80::210:2030:9b:d48efe80::210:2030:9b:d48e
the kernel panics.
Signed-off-by: Walter Xie <41377148@qq.com>
This commit adds a possibility to use Qav (credit-based shaping) in the
ethernet drivers.
There are two parameters exposed through the mgmt api: deltaBandwidth
and idleSlope.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is no point in sending Announces with GM chosen in BMCA if it is
expired and InfoIS is changed to MINE.
Check where does the GM info come from and fill the Announce packet
accordingly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Previously the newer one got dropped.
The older ones will be dropped in a way that the follow up messages for
them will not be sent.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The gptp port number starts from 1, so the check was incorrect.
Use the proper define values before printing stats.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The shell did not check if the gptp port (command argument) is numeric.
Add that check before executing the port info functions.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
A small helper function will return information whether
a given network interface has VLAN enabled or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not clear pending PDELAY_REQ pointer when sending a new one.
Unref the state->tx_pdelay_req_ptr first and only then set the
new pointer value. This will prevent buffer leak if we miss the
response from the peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the calculated ratio values are used just once.
Without this, if the ratio is even insignificantly larger than 1, the
actual clock quickly drifts to really large numbers. This causes the
sync procedure to restart too often.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem with the previous approach was that the response timestamp
callback which calls net_pkt_unref could be skipped if the callback was
already registered for another packet. The net_pkt_ref function was
always called which led to memory leaks.
This commit simply disallows handling multiple pdelay requests at once.
If the timestamp callback is already registered, the received request
will not be handled.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The issue was that the length field of the tlv extension in the sync
follow up packets was wrong. It is supposed to skip the length of the
header of that extension. The easiest fix was separating the header and
the actual contents into separate structs and that's what this commit
does.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
As the PTP clock should return the correct time, use that
instead of zephyr uptime for time as that has only ms accuracy.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use priority 3 (critial app) for outgoing event messages (Sync,
Pdelay_Req and Pdelay_Resp). Use priority 6 (Internetwork Control)
for all other outgoing packets.
See IEEE 802.1Q chapter 8.4.4 for more details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Split out definition of net_app_init() and its parameter flags from
net_app.h header to new net_config.h header. As we do this, rename
the function to net_config_init() and flags to NET_CONFIG_NEED_*.
This is a second step in splitting out network configuration API
out of net_app API, started in the c60df1311 commit.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There is no link address for Dummy network technology, so check
that before trying to print link address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows zephyr to listen LLMNR DNS queries sent by Windows
and respond to them. See RFC 4795 for details.
The feature requires that hostname is set properly to the
zephyr device and LLMNR is configured properly.
Typically following config options are enough for this support:
CONFIG_NET_HOSTNAME_ENABLE=y
CONFIG_NET_HOSTNAME="zephyr-device"
CONFIG_DNS_RESOLVER=y
CONFIG_LLMNR_RESPONDER=y
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements LLMNR client from RFC 4795. This means that caller
is able to resolve DNS resource records using multicast DNS.
The LLMNR is used in Windows networks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An ARP entry, if not free, will be either in pending list or in the ARP
table. What differentiate both is the type of data they hold: either a
pending packet or an actual ethernet address.
It is then possible to unite these 2 attributes to save 4 bytes
per-entry.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Until now, each ARP entry had a k_delayed_work to be used as a timer
when the ARP entry is a pending one, waiting for the ARP request to
succeed in order to get to the ARP table.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
ARP request timer by having one central k_delayed_work and a timestamp
in every ARP entry properly handled at every timeout (1+ entry might
have reached the timeout then).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of looping over the entries array, which will keep the same
order, let's use slist: one for free entries, one for pending ones and
finally one as the actual ARP table.
This permits some optimizations in how to look up and making small
heuristics by changing entries order when it seems relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This "net gptp [port id]" command will give some extra info about
gPTP status if gPTP is enabled in config file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application does not do much, it just registers to a callback
in order to get information about gPTP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The subsys/net/ directory is more logical place for L2 code instead
of ip/ directory. No functionality changes by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Defines a PTP clock driver that can be implemented in those network
interface drivers that provide gPTP support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
This is actually the same as #7229 in which we missed this side of
conversion (only PCP to packet priority was implemented).
The conversion is actually the same both ways, thus it uses the map
added earlier.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Allow creation of TX timestamp thread which will collect TX timestamp
information from device drivers. If the callback is registered, then
it will pass that timestamp information to the relevant party for
further processing. This support will be used by gPTP code in
subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
Due to the fact that cmake doesn't allow to build empty "library"
(which would be the case when neither CONFIG_NET_APP_SERVER nor
CONFIG_NET_APP_CLIENT is defined).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app library consisted of 2 disjoint parts: a) library to
setup/configure networking on the application startup; b) library
to setup client and server connections.
As the configuration library is universally useful and is a generic
Zephyr networking component, split it out to a seperate top-level
networking library under net/lib/config/.
Fixes: #7658
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch changes the backoff factor to be random between zero and
2^be-1, as defined by the standard.
The previous implementation generated either a power-of-two number or
zero for bo_n, because it only overlaps a single bit with the random
number. The overlap is very rare, as in random, and results in the
backoff time being zero most of the time.
Signed-off-by: Franco Saworski <franco.saworski@blik.io>
When the priority of the LwM2M engine was lowered, it causes an
occasional registration update to fall outside of the registration
lifetime. This shows up as the following error:
Failed with code 4.4. Retrying registration
Let's try and retry a bit earlier to account for the priority
change.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
'default false' should have been 'default n', though they happen to have
the same effect here, due to undefined Kconfig symbols ('false')
evaluating to 'n' in a boolean sense.
Kconfig bool symbols implicitly default to 'n', so remove the default
rather than fixing it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Invalid configurations should be detected during configuration instead
of during compilation whenever possible.
This patch replaces a BUILD_ASSERT on CONFIG_NET_BUF_USER_DATA_SIZE
with what is intended to be an equivalent Kconfig restriction.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Currently, we add TCP options only to SYN+ACK reply to peer's SYN
(i.e. passive open). For consistency, add them also when we send
SYN ourselves (active open). In both cases, we add just MSS option
currently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Ethernet header is always filled in the first fragment of a packet,
so passing it as a separate function paramter is supefluous.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There's an apparent typo in testing net_buf headroom. Also, after
adding VLAN header support, its size should be used too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There was no proper support to timeout an ARP requests which meant
that trying to resolve non-existent IP address left network packet
pending on ARP cache.
Fixes#8019
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For debugging purposes it is useful to know which interface
the dropped packet was received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'source' of subsys/net/ip/Kconfig in subsys/net/Kconfig is already
within an 'if NETWORKING' block, so the NETWORKING dependency in
subsys/net/ip/Kconfig is redundant.
Remove the redundant dependency.
This gets rid of a bunch of 'NETWORKING && NETWORKING' dependencies in
the auto-generated Kconfig docs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Because per-interface statistics rely on interface pointer stored in a
net_pkt, it should not be unreferenced before stats are updated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Functions for per-interface statistics collection used a pointer to a
packet that could've been deallocated in the net_conn callback function.
In result, application could crash when interface related to the packet
was referenced. To fix that, packet interface is stored earlier, so it
can be used instead for statistics collection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The IP stack drops any TCP segment which doesn't fit into our
receive window. However, we still must accept Zero Window Probe
segments, which are segments, usually with data length of 1, which
a peer sends to us after we stayed with zero window for some time.
In this case, we need to repeat an ACK with the old ack number.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Catch interface up/down events so that we can renew the
address if interface goes down and is then restored.
Fixes#7553
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_eth_carrier_on() and net_eth_carrier_off() functions that
can be called by ethernet device driver when it detects that carrier
is lost or found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's rather confusing to not see current TCP state in any way (it
makes distinguishing different TCP contexts very hard). And nobody
can know/remember that it's printed with CONFIG_NET_DEBUG_TCP
defined. So, just make it be printed always (initially I thought
about printing just numeric value if CONFIG_NET_DEBUG_TCP isn't
defined, but why, if we can print symbolic name easily).
Also, add a hint that defining CONFIG_NET_DEBUG_TCP will still
print even more info (like unacked pkt list) - similarly to
similar helpful hints we have in other parts of net shell.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's set it by default when allocating net_pkt. A macro will avoid
ifdefs as well
CONFIG_NET_TX_DEFAULT_PRIORITY is always defined.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When disabling an ethernet interface, only its cache entries need to be
cleared up and not the whole cache. This is meaninful in case there is
2+ ethernet interface instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only the first one requires it. Actually drivers know that already and
handle the frags list correctly.
In case ethernet has to run along with 15.4 on the same SoC, this will
optimize things quite a bit knowing that biggest ethernet frame will be
forcefully split in as many 128 bytes frags as necessary.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A typo in update_attrs() was setting every observer to a PMIN of 0.
This meant we could send observer data as often as the process was
called. This is out of spec as the default minimum is 10 seconds.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The hop limit value in net_pkt was not updated according to
received IPv6 header.
Fixes#8182
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M engine thread is used for various periodic triggers.
None of these are in a critical path that requires super sensitive
timing and the current K_PRIO_COOP(7) setting was causing the
Bluetooth RX thread to have to wait too long for certain actions
to complete.
Let's lower the priority to -1 (effectively) to eliminate these
conflicts.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
IPv4 header's checksum was set when 'setup_ipv4_header', but in that
times IPv4 header's source ip and dest ip address haven't setted. So
it may be set an incorrect checksum.
Fixes: #7989
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
We init the net_tc tx/rx work queues during net_init() with a
call to init_rx_queues(). The L2/L3 and networking drivers have been
setup at this point. If we yield the current thread, we risk
a call to net_recv_data() which calls net_queue_rx() which calls
net_tc_submit_to_rx_queue() on an RX work queue which hasn't been
setup yet.
This manifests as a boot hang under seemingly random circumstances.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Security layer was tested only against CC2520, which does not mandate to
begin the session with a valid key. However, the crypto API tells it
must do so. And indeed, starting a session on mtls shim crypto device
will fail due to missing key. Thus moving the relevant code where it
should.
Reported-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This one converts "raw" timeout value to use K_MSEC() macro
in order to make clear how long the timeout is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use of K_SECONDS() macro is more intuitive so use that instead of
plain MSEC_PER_SEC define.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert couple of MSEC() calls to K_MSEC() as the timeouts
when using MSEC() are just too long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
During normal use, a CoAP packet can be resent due to network congestion
and other causes. During block transfer the LwM2M client checks to make
sure the block received is the one we expect and if not generates a
"duplicate" warning. When this happened, we were releasing the reply
handler and when the correct block was received the client would
generate a "No handler" error.
To avoid releasing the reply handler too early, let's set the coap_reply
"user_data" field to an error condition (1). Then, once the reply
processing is complete we can check the user_data field to be sure that
it's ok to release the reply handler.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This patch fixes possible null pointer dereference in
net_stats_update_rpl_resets(...).
net_rpl_set_root_with_version(...) does not initialize instance->iface
and calls net_rpl_reset_dio_timer(...), which then calls
net_stats_update_rpl_resets(instance->iface).
fixes: #7862
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The code was using MSEC() macro in few places instead of more
proper K_MSEC(). The MSEC() takes seconds as a parameter and
K_MSEC() takes milliseconds.
Fixes#7657
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sin6_scope_id is not set anywhere and not used. Probably left over
from old ZOAP library. Just address, port and family type are enough
to find registered CoAP observer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The next error check is much more suitable to handle the error due to
the error message which lets the user know that something went wrong.
Fixes#7661.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
In switch statement break statement was missing causing IPv4 part to
execute even if the packet is IPv6. Also logical negation is wrong in
this context.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
NET_ASSERT is useless here, as we already know that an error happened.
Use NET_ERR in order to print a more informative message.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
When calling net_frag_read(), frag == NULL is an error only if pos is
not zero. It is thus incorrect to throw an error only if !frag, as
pos must also be checked to be not zero.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Current implementation hardcoded channel in received frame structure.
With this change channel can be retrieved from a OpenThread platform,
and put in the frame. In result procedures like Discovery can be
executed correctly. Change was tested with OpenThread Border Router.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit contains bugfix for Joiner eui-64 handling and setting radio
in correct mode after calling thread stop.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If a packet with source IP address and port same as the address of echo
server is received, it causes echo server to recursively send the packet
to itself, resulting in a crash and memory depletion. This commit fixes
the crash by dropping the packet.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When designing the registration client for LwM2M, I understood
that the LwM2M Technical Specification allows for a multi-server
connection setup where the client makes several connections
to various LwM2M servers and allows each of them to manage
various aspects of the LwM2M client based on Access Controls.
However, the way I implemented it was not well thought out and
as we look forward to adding Bootstrap support, it needs a
do over.
Let's remove all of the code dedicated to handling multiple LwM2M
client connections. This will simplify and reduce the code size
of the registration client considerably.
Later, once Bootstrap support has been added, we can implement
multi-server connections in a cleaner manner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This allows a user to customize the port used for downloading
firmware via the pull method of the LwM2M client. It's default
value of 0 will select a random port during initialization.
NOTE: If set, this value should not be the same port as the
LWM2M_LOCAL_PORT setting.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Due to a bug where LWM2M_LOCAL_PORT was not being honored, all
outgoing traffic from the LwM2M client was coming from a random
port determined during initialization.
Now that this bug bas been fixed, let's default the client to the
behavior that most users are expecting, and let new users customize
the outgoing port if needed (which should be rarely).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, CONFIG_LWM2M_LOCAL_PORT is never used when setting up
the LwM2M client. Let's set the port of the local address using
CONFIG_LWM2M_LOCAL_PORT, so that the client can bind to it.
NOTE: A setting of 0 will use a random port.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, the client_addr parameter is only used to check the
sa_family at various points during the init process. Both the
IP address and the port are ignored. Let's set the local client's
port based on the port value of the passed in client_addr if one
is supplied.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The port parameter passed to _net_app_set_local_addr() is converted
from host byte-order to network byte-order. Here we are passing
a port value which has already been translated to network byte-order.
Let's translate the local port to host byte-order when passing it
to _net_app_set_local_addr() to fix this issue.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previously, there was a boolean CONFIG_NET_TCP_TIME_WAIT setting
("master switch") and numeric CONFIG_NET_TCP_2MSL_TIME setting,
both named not ideally (there were both NET_TCP_TIME_WAIT and
CONFIG_NET_TCP_TIME_WAIT symbols in the source, with very different
meaning; "2MSL_TIME" was also a roundabout way to refer to
TIME_WAIT state time). In addition to that, some code was defining
adhoc, hardcoded duplicates for these settings.
CONFIG_NET_TCP_2MSL_TIME was also measured in seconds, giving
poor precision control for this resource-tying setting.
Instead, replace them all with the single
CONFIG_NET_TCP_TIME_WAIT_DELAY setting, measured in milliseconds.
The value of 0 means that TIME_WAIT state is skipped.
Fixes: #7459
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We only clear 3 of the 6 member variables of the coap_reply structure
in coap_reply_clear().
Let's make sure to reset all of them.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The base CoAP retry setting is quite fast for network technologies
such as LTE-M and LoRa. Let's add an option to delay retries
a bit longer depending on the need.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Temperature object (Section 10. "IPSO Object: Temperature").
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using IPSO Smart Object Guideline: "Smart Objects Starter Pack 1.0"
dated May 27, 2017, let's mark the OPTIONAL resources for an
IPSO Light Control object (Section 16. "IPSO Object: Light Control")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Firmware Update object (Section E.6 "LwM2M Object: Firmware
Update")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Device object (Section E.4 "LwM2M Object: Device")
As a result, the Device object no longer configures the default
buffers for data storage of several optional resources.
The LwM2M client sample is also changed to to setup these read-only
buffers instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Server object (Section E.1 "LwM2M Object: Server")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Security object (Section E.1 "LwM2M Object: Security")
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This patch introduces several changes to support OPTIONAL resources.
The primary indicator for this behavior is to assign FLAG_OPTIONAL
to the object field's permission flags.
These resources are not setup by the LwM2M object code. They are
left up to the user-based code for initialization via the following
functions:
lwm2m_engine_set_res_data()
lwm2m_engine_get_res_data()
When assigning const-based data as a data buffer, user-based code can
also specify the following data flag: LWM2M_RES_DATA_FLAG_RO
The FLAG_OPTIONAL flag also affects the LwM2M engine in the following
ways:
- CREATE operations won't generate an error if optional resources are
not included.
- Object instance READ operations won't complain about missing
optional resources.
- In the future, BOOTSTRAP operations can have different handling
based on optional resources.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In the future, we will have optional resources that may or may
not be assigned a buffer for data storage. When these resources
are queried we need to be able to return an error code if the
buffer isn't set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of selecting the first IPv4 address from the network
interface, use destination address to select the proper local IPv4
address.
Fixes#7500
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix a build warning when compiling a net_app sample with
CONFIG_NET_APP_DTLS enabled by changing the print formatter from %zu
to %d. It references the var hdr_len which is defined as an int:
In file included from include/net/net_core.h:78:0,
from subsys/net/lib/app/net_app.c:27:
subsys/net/lib/app/net_app.c: In function ‘_net_app_ssl_mainloop’:
include/logging/sys_log.h:96:20: warning: format ‘%zu’ expects
...
subsys/net/lib/app/net_app.c:2132:6: note: in expansion of macro
‘NET_ERR’
NET_ERR("could not skip %zu bytes",
^~~~~~~
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Changed define for SETTINGS_CONFIG_PAGE_SIZE from a hard coded value
to reference build system generated FLASH_ERASE_BLOCK_SIZE. This value
comes from 'erase-block-size' found in the dtsi file of devices.
- Modified nrf52840.dtsi to include definition for 'erase-block-size'
Fixes#7107
Signed-off-by: David Leach <david.leach@nxp.com>
This removes some tricky math to calculate lengths and offsets,
ensuring that, when appending the WebSocket UUID to the handshake
key, the key_accept buffer won't overflow.
Coverity-ID: 183057
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Rewrite prepare_reply() to reduce unnecessary string copies and calls
to net_pkt_append_all(). Also reduces some of the tricky string length
calculations.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In an effort to reduce the footprint of the LwM2M client, let's
lower the default # of observes handled by the client from 20 to
10.
This saves ~640 bytes of SRAM.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove "used" member from observe_node structure and replace by
checking the ctx for non-NULL value.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The slist attr_list doesn't scale well when added to the LwM2M object,
object instance and resource instance structures. The goal of a
robust LwM2M client is to let the user create MANY object instances
and these will have many resource instances each. The amount of SRAM
taken up by the attr_lists will only increase over time, regardless
of the actual # of write attribute structures reserved via the
LWM2M_NUM_ATTR config setting.
Instead, let's remove the slist from these structures and add a
reference pointer to the lwm2m_attr structure. We can use this
reference to create the one to many relationship between the objects,
object instances and resource instances for a much smaller amount of
code and SRAM resources.
The sacrifice for these savings will be a larger # of iterations when
looking up assigned write attributes and matching them to their
references. However, due to the # of write attributes current being
handled, the # of iterations during this process is very manageable.
Example flash and SRAM savings when building for nrf52_blenano2:
Before patch:
Memory region Used Size Region Size %age Used
FLASH: 139532 B 512 KB 26.61%
SRAM: 36576 B 64 KB 55.81%
IDT_LIST: 148 B 2 KB 7.23%
After patch:
Memory region Used Size Region Size %age Used
FLASH: 139284 B 512 KB 26.57%
SRAM: 36000 B 64 KB 54.93%
IDT_LIST: 148 B 2 KB 7.23%
Summary: This patch saves ~248 bytes of flash and ~576 bytes of SRAM
for the typical configuration of LwM2M client in Zephyr.
NOTE: these values will vary by architecture.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When any error is returned from update_attrs() in engine_add_observer()
an EINVAL is returned back to the caller. Let's return whatever error
code was generated in update_attrs() instead.
Also, add handling where previously errors were ignored.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
For code clarity, let's move notification_attrs structure to the top
of lwm2m_engine.c. While we're at it, we can re-order it's members
for memory alignment.
NOTE: This patch does not change the current flash or SRAM usage but
further additions to the notification_attrs structure could.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The path member of the object instance and resource instance structures
can easily be removed to save several bytes per instance over the entire
LwM2M subsystem. So let's remove it.
Example savings when building for nrf52_blenano:
SRAM usage before patch: 37952 B
SRAM usage after patch: 36576 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Let's optimize the order of the following structures to account for
memory alignment:
lwm2m_engine_obj
lwm2m_engine_res_inst
lwm2m_output_context
lwm2m_output_context
Tested building for nrf52_blenano hardware:
SRAM usage before patch: 38240 B
SRAM usage after patch: 37952 B
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
sendto() is one and only caller of send_data(), a function of handful
of lines, and yet send_data() is located a hundred lines away from
it. Such "spaghetti functions" complicate review, debugging, and
refactoring of the IP stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's highly unlikely that snprintk() will return a negative value, but
that's a possibility that will make the `pos` variable be set to a
value outside the boundaries of the statically allocated `buf` array.
Also clamp writes to ensure that the statically allocated buffer won't
be overwritten with a large token length.
Fixes#7070.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The IEEE 802.1Q chapter I.3 contains a proper network packet
priority to traffic class mapping. The original mapping was
clearly incorrect.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In the future, when bootstrap support is added, this config won't
be used. Let's remove it.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Now that the LWM2M_OP_* bits have been renumbered, we no longer need
a custom BIT() macro for the LwM2M code. Let's remove it and use
BIT() instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Remove unused OP flag LWM2M_OP_NONE and renumber the existing flags
so that the operations used in object permissions land in the lowest
bits, and extended operations come later.
We may eventually add more permission / data flags, so let's try and
keep them inside a 1 byte boundary (flags with bits 0 to 7).
NOTE: LWM2M_OP_DELETE is currently not checked as a permission but
it may be in the future so it is in the lower bits.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When a data pointer or data length is not set, the read and write
handlers should return ENOENT to generate the correct LwM2M error
code (COAP_RESPONSE_CODE_NOT_FOUND).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Before ever call of string_to_path(), the lwm2m_obj_path object
was being cleared via memset. Let's move the memset into
string_to_path() to remove the duplicate code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Eliminate several similar code-blocks by replacing
engine_get_resource() with a more useful function called:
path_to_objs()
By supplying an lwm2m_obj_path object, it will find and set
the related values for:
struct lwm2m_engine_obj_inst
struct lwm2m_engine_obj_field
struct lwm2m_engine_res_inst
NOTE: NULLs can be supplied where the returned value is not
important.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With fragmentation disabled echo server responds to packet fragment with
ICMPv6 message Type: "Parameter Problem (4)", Code: "unrecognized Next
Header type encountered (1)". If a fragment with payload length 15 is
received in response sent by echo server IPv6 payload length and ICMPv6
checksum are wrong. This patch solves the issue by correcting payload
length.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
The code was accessing network pkt before the value of the pkt
was checked.
Coverity-CID: 185394
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes crash caused by double free from message sequence
fragmentation. When double free happens the call stack is:
0 reassembly_cancel
1 handle_fragment_hdr
2 net_ipv6_process_pkt
3 process_data
4 processing_data
5 net_rx
6 process_rx_packet
7 work_q_main
8 _thread_entry
So at first packet is unrefed in reassembly_cancel and then also in
processing_data.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
After successful send, the packet is automatically cleared, so
trying to call print_send_info() on it leads to errors:
[net/pkt] [ERR] net_pkt_tcp_data: NULL fragment data!
[net/tcp] [ERR] net_tcp_get_hdr: NULL TCP header!
(if error logging enabled).
This change is similar to how print_send_info() is called in
existing send_reset() function of this source file.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we have multiple network interface (like in VLAN), then we need
to select the proper local interface based on destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always using default interface, use the IPv4 target
address to select the correct network interface when sending
IPv4 ping request.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have multiple network interfaces and we want to send
a IPv4 network packet to certain destination, then this new
helper can be used to figure out what network interface to use.
Note that this commit only adds support to select the correct network
interface according to destination IPv4 address. This does not enable
any automatic routing to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This module exposes for now the net mgmt for WiFi: connect, disconnect
and scan commands.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Exposing connect, disconnect and scan for now.
In case the iface is an instance of a WiFi offload device, the way it
manages scanning, connecting and disconnecting will be specific to that
device (not the mgmt interface obviously). In such case the device will
have to export relevantly a dedicated bunch of function to serve the
mgmt interface in a generic way.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Wifi mgmt interface will be required by offloaded wifi device drivers
therefore when selecting this interface, make sure dependencies are
selected too.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add empty WiFi network management functions that only return -ENETDOWN.
Define management handlers for scan, connect and disconnect requests,
again without any implementation nor parameters defined.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
First because nobody needs to know that besides net_mgmt core and
secondary to avoid possible circular dependancy on
net_mgmt.h/net_event.h.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previously, with CONFIG_OFFLOAD enabled, net_if_up() and
net_if_down() were calling l2->enable, which didn't exist,
so was crashing.
Instead, if CONFIG_OFFLOAD is enabled, it will test for if the net_if is
of an offload type and react accordingly.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
According to RFC 793 we should wait for FIN in FIN_WAIT_1 and
FIN_WAIT_2 states. Receiving ACK in FIN_WAIT_1 just moves us to
FIN_WAIT_2 state.
Right now TCP connection is never closed if FIN is not received
in FIN_WAIT_2 state. Fix that by keeping fin_timer active in
FIN_WAIT_2 state, but canceling it just after FIN is received.
Fixes: 124c067027 ("net: tcp: Cancel the fin_timer on FIN message
in FIN_WAIT1 state")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Without that, if ipv4 is configured via DHCPv4, server will not be
accessible. It looks like it won't properly bind addresses.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Removed OT_PLAT_RADIO_DEVICE_NAME
- Changed OpenThread binding to use NET_AP_IEEE802154_DEV_NAME
- Modified Kconfig chain to ensure NET_AP_IEEE802154_DEV_NAME
is enabled for both native 802.15.4 and OpenThread configurations
- Changed default setting of NET_L2_IEEE802154 in defconfig for mkw41z4.
- Fixed OpenThread api support code to use the state of mIsCcaEnabled
in the transmit frame to conditionally invoke radio_api->cc() on
transmits.
Signed-off-by: David Leach <david.leach@nxp.com>
- Debug code did not compile when level set to DEBUG.
- OpenThread has a define for BASE which conflicts with the BASE
field in MTB_Type defined in MKW41Z4.h. The change is consistent
with how it was handled in the KW41 port in OpenThread.
Signed-off-by: David Leach <david.leach@nxp.com>
- There is a mismatch when interfacing with external code where a
uint32_t is defined as a parameter and internal Zephyr code attempts
to use u32_t. If NewLib is used, the typedef for u32_t is
'unsigned int' which is not a portable match to uint32_t as
'unsigned int' is not a common size across architectures so gcc will
output a warning.
- The mcux flash code calls NXP supplied functions that expect a
uint32_t.
- openthread.c ot_state_changed_handler has a uint32_t flag as a
parameter.
Signed-off-by: David Leach <david.leach@nxp.com>
Make sure we are able to collect ethernet statistics and query
it via net management API.
Fixes#6899
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We returned too early when creating listeners which meant that
IPv4 listener was not created if IPv6 one was created successfully.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Missing newline on end of the file - this cause failure
while try to use menuconfig.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This will permit to tweak ethernet L2 and devices settings at runtime.
Currently, only devices settings are tweaked through this interface.
Fixes#6640
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will be additional source files coming in, so let's not clutter l2
root directory.
Reordering a bit l2 Kconfig: offload part come first, then the l2
drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function should be exposed if only vlan is enabled.
Also, changing vlan_setup's signature to stay consistent with device
driver API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we return proper network statistics data if
someone asks it via network management interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have several network interfaces and not all of them are
VLAN enabled, then we might return wrong network interface to
the ethernet device driver when it asks one. To fix this, return
the first interface that has not enabled VLAN if the tag of the
network packet is unspecified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Although very unlikely, make sure that if the net_recv_data() is
called with NULL network interface or packet, we recover that and
return error to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to take a network interface down or bring it up.
The command syntax is "net iface [up|down] [index]"
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add commands to add, remove or get information about VLANs
attached to network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the sanitycheck tests were having too small limit for
network buffers when compiling for sam_e70_xplained board.
Increase the buffer limits when testing this for this board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the priority currently fits u8_t then use it instead of int
for priority value for queue and thread.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The array size checks were incorrect.
Coverity-CID: 183482
Coverity-CID: 183485
Fixes#6883Fixes#6885
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SYN flood causes crash in RX thread due to NULL pointer access. After
the crash available RX memory is zero, hence echo server does not
respond to echo request.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Callers of dns_get_addr_info() depends on receiving an end-of-results
callback (where 'info' is NULL) when finished. Do this on failure in
cb_recv() instead of pointing to an empty object.
This fix will avoid a deadlock situation in getaddrinfo().
A reply code other than "no error" in the DNS response is a typical
case when the lookup failed and this occurs.
Moved "struct dns_addrinfo info" variable from cb_recv() to dns_read()
because it was now unused in cb_recv().
Adding tests for this requires network access and a DNS server,
or a mechanism for generating a DNS response with a reply code.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Do not lookup DNS AAAA entries if IPv6 is disabled. The result can not
be used anyway because "struct sockaddr" does not have enough space for
IPv6 address in that case.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Move core TCP functionality from net_context.c to tcp.c. Create empty
functions that the compiler can remove if TCP is not configured. As a
result remove TCP ifdefs from net_context.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Similar to the socket connect() call, calling connect for a UDP
context needs to set both local and remote addresses and port
number. Fix this not to be exclusive for TCP.
Similarly, the remote destination can be a multicast address when
UDP is used.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Queue a TCP FIN packet when needed if the socket was connected or
listening and where FIN wasn't already received.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
A new context cannot have callbacks set, as it was freshly created
in the beginning of the function. Thus the extra callback clearing
can be removed. This is a left-over from commit ce41d5f432.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Ifdefs around TCP code can be removed since the TCP code will compile
to empty functions when not enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Refactor sendto() code so that destination address and its validity
is checked first, followed by offloading verification. Move context
and shutdown checks into TCP queueing function.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
With CONFIG_NET_TCP is not set, provide empty static inline
prototypes for all TCP functions available to other parts of
the IP stack.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The "net stacks" command was printing TX or RX thread values so
that it was not possible to use the values in debugging easily.
Add traffic class value when printing the info so that it is
easy to see what TX or RX queue is doing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add statistics for number of packets and bytes to each traffic
class. Print this information in net-shell.
Also make sure that we do not calculate total packet length many
times. So calculate network packet total length once and then use
that value instead of calculating it many times in a row.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add context option support and implement PRIORITY option that
can be used to classify the network traffic to different trafic
classes according to said priority value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previous way was too lazy. Now let's match exactly for the layer and the
layer code.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make sure also to increase in_event if only inserting event info was
properly done.
Raising also range limit in Kconfig to a much higher value.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the service parameter optional in getaddrinfo().
The application should be able to use NULL as service when only
interested in the host lookup.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Add support for MSG_DONTWAIT flag in send() and sendto(). This
aligns with the same flag used in recv() and recvfrom().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
There was not enough space for \0 at the end of the string.
Coverity-CID: 183057
Coverity-CID: 183050
Fixes#6675Fixes#6682
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Memory leak occurs if neighbor table is full and echo request from an
unknown neighbor is received. Hence, on an attempt to send NS unref of
pending is not done, causing the memory leak.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
This was reported by valgrind
Source and destination overlap in memcpy(0x80c18c0, 0x80c18c0, 6)
at 0x4035C3E: memcpy (vg_replace_strmem.c:1023)
by 0x80978CA: ethernet_send (ethernet.c:319)
by 0x8061B9B: net_if_send_data (net_if.c:281)
by 0x805F215: net_send_data (net_core.c:399)
by 0x8080998: send_mldv2_raw (ipv6.c:2858)
by 0x8080BA6: send_mldv2 (ipv6.c:2889)
by 0x8080D6C: net_ipv6_mld_join (ipv6.c:2915)
by 0x8061EF0: join_mcast_allnodes (net_if.c:438)
by 0x8062CA4: net_if_ipv6_addr_add (net_if.c:826)
by 0x8062296: net_if_start_dad (net_if.c:557)
by 0x8066667: net_if_up (net_if.c:2107)
by 0x8066AF0: net_if_post_init (net_if.c:2341)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As following commits need this functionality, create a function
which converts "01:02:ab:fe:34:dd" type hex strings to array of
bytes. Change the SLIP driver to use this new function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_DONTWAIT flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Instead of CONFIG_COAP_MBEDTLS_SSL_MAX_CONTENT_LEN, use recently
introduced CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Since this function is used on some drivers, and knowing these drivers
can be built for OpenThread, let's make it generic and out of the
802.15.4 L2 stack.
Fixes#5942
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If net-shell is enabled then it could try to access neighbor state
names. This would cause compile error as net_ipv6_nbr_state2str()
function is then missing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to check the debug level to be INFO or higher, otherwise
the some of the variables in net app init.c will give unused
warning. Also the sys_log.h needs to be included _after_ we have
set the logging level, this is done by net_core.h so we should
not include the syslog header file here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit creates a websocket library that can be used by
applications. The websocket library implements currently only
server role and it uses services provided by net-app API.
The library supports TLS if enabled in configuration file.
This also adds websocket calls to HTTP app server if websocket
connection is established.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor recvfrom code for handling SOCK_DGRAM into zsock_recv_dgram
to align with SOCK_STREAM. Add flags parameter, will be used later.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
This commit fixes incorrect Ethernet frame check sequence and ICMPv6
checksum caused by MTU set to zero in RA
Fixes#6342
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
We use ctx->user_data to hold socket flags. As each call to
net_context_recv() and net_context_send() overwrites its previous
value, we explicitly must pass the current ctx value there.
Without this, non-blocking socket was turned into blocking after
e.g. switching from receiving to sending.
Fixes: #6309
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If accept callback is called with error, don't treat the context
passed to the callback as a new accepted context.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We pass normal 1-based mask, and mask invert it before logically
AND'ing with the value. This apparently a mix-up between how the
mask was intended to be passed initially and how it was in the end.
This issue actually didn't have an effect, because currently defined
flags have mutually exclusive lifetime (when "eof" flag is set,
"non-blocking" flag value is no longer import). Anyway, that's a
bug and needs fixing.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_app_ctx maintains multiple net contexts(net_ctx). But when http
api's wants to reply or send some data, its always choose the first
net_context in the array, which is not correct always.
net_app_get_net_pkt_with_dst() api will select proper context
based on destination address. So with the help of new api in
net_app, http can select proper context and send packets. To
achieve this, desination address is provided in http_recv_cb_t
and http_connect_cb_t callbacks. Also chaged relevant API's to
provide destination address in http message preparation methods.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We're missing a k_sem_give for contexts_lock in the
CONFIG_NET_OFFLOAD path of net_context_put().
This fixes a network hang which occurs after any http_close()
call when CONFIG_NET_OFFLOAD is enabled.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In commit 9489fa54cc ("net: http: Fix http_prepare_and_send"),
the logic for when to call http_send_flush() was incorrect. This
is causing a call to http_send_flush() every time
http_prepare_and_send() is called.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
NOTE: This patch was previously applied but was lost when
commit d1675bf3e6 ("net: http: Remove the old legacy API")
moved code around.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In previous version of the HTTP API, commit 8ebaf29927 ("net: http:
dont timeout on HTTP requests w/o body") fixed handling of HTTP
responses without body content.
For the new API, let's add a specific fix for when PUT/POST requests
are responded to with just the status code.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This commit fixes the crash of echo server from unsolicited RA with
reachable time set to 2147483648. The crash was in
net_if_ipv6_calc_reachable_time because such large value resulted in
modulus by zero due to integer overflow.
Fixes#6382
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Use ccache when building OpenThread. When the cache is warm, I was
able to observe that this patch sped up a clean build from 45 seconds
to 33 seconds.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This doesn't appear to be used by anything in Zephyr. Remove it,
as it doesn't perform correct bounds checking.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If net_icmpv6_get_na_hdr() returns NULL (which is possible with a
specially crafted packet), utility functions net_is_solicited(),
net_is_router(), and net_is_override() will attempt to read invalid
memory.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
mbedTLS log level is obviously a mbedTLS config setting. It makes
sense to have it defined in mbedTLS Kconfig, and different parts
of Zephyr to reuse as needed (e.g. net-app vs upcoming TLS wrapper
for sockets).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Pool size is no longer available so it is no use trying to print
its value. This change was introduced in commit dd09cbc1c4
("net: buf: Redesigned API with split data and meta-data")
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes the crash of echo_server from overflow in ICMPv6 NS
source link-layer address option.
Fixes#6235
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When IPv6 and IPv4 both are enabled and net_app acting as a client,
configuring local context has one glitch.
After selection of IPv6 context as a default context function
should return immediately, otherwise it continue to select IPv4
context as default context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of TCP and node acting as a APP_SERVER it can have multiple
concurrent connections. Calling close callback when there are still
active connections exists, causing an issue.
e.g. When a node acting as a HTTP server and can support multiple
TCP connections. Let's say one of the connection is in closing
state and the rest are still in active state. net_app_ctx is
calling close (http_closed) callback of registered upper layers.
HTTP assumes all the connections are closed and unref all the
connection related stuff.
Call the close callback only when there are no active connections.
Patch has also moved TCP stuff under one #ifdef.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of having K_FOREVER when allocating a packet in IPv4 ARP
and IPv6 ND, set a timeout so that we do not have a case where we
would wait net_buf forever.
Fixes#5484
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPSP channel is disconnected call net_if_carrier_down instead of
net_if_down since the later may still attempt to send packets while the
former just discard them immediatelly.
Fixes#5317
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces net_if_carrier_down so the L2 driver can inform when it
has lost connectivity so all packets shall be flushed and the interface
should be put down.
Fixes#5317
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Avoid using an uninitialized pointer when adding headers to the HTTP
context.
Coverity-CID: 178792
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In net_app_init_client(), the remote port is set after an initial
set of checks based on the remote_addr's assigned family.
However, if the peer_addr_str is a host name which needs to be
resolved via DNS, the family won't be set yet, and the port is
left as 0.
To fix this behavior let's move the port assignment after the
DNS lookup section to be sure that the remote sa_family is set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Difference being that the data is not, then, allocated from the pool.
Only the net_buf is.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If context is bound to IPv6 unspecified addresss and some port
number, then unspecified address is passed in TCP reset packet
message preparation. Eventually packet dropped at the peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Zephyr doesn't have luxury to create re-transmit timer per packet. So
it has different methods to handle packets in queue. But re-sending
packets on valid ack messages causing issues.
E.g. A TCP node sent two packets (packet-1, packet-2). Peer replied
two ACKs (ACK-1 and ACK-2), and these two ACK's are at rx_thread
queue. Now ACK-1 is handled and reference of packet-1 is freed
from sent list. Then if condiftion (valid ACK and connection
state is ESTABLISHED) notices that, sent list is not empty.
Restart the timer, modify sent flag and resend packets in a
list. Here packet-2 is sent again, even though ACK-2 is already
received. Situation is worse if there are more packets in the
list.
So only start the re-transmit timer in-case queue is not empty. It
allows rx_thread to handle all incoming packets (in this e.g ACKs).
When the re-trasmit timer expires, it sends the packets which
are left in queue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of failed to get source address from the net packet,
release the assgined tcp backlog entry. Otherwise it will
never be freed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
k_delayed_work_cancel(&context->tcp->fin_timer) called twice
immediately one after other.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
RFC 7252, sec 4.8 [https://tools.ietf.org/html/rfc7252#section-4.8]
The default MAX_RETRANSMIT is 4, current implementation only
retry 3 times. Update next_timeout() to return one more retry.
Also, add a TODO for random generated initial ACK timeout
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The existing implementation assumed DNS resolv callback will be
called just once, but that's not always the case (apparently,
for multi-homes hosts or something). So, apply array bounds
checking (and do pointer arithmetic only after it, as the C
standard otherwise warns of "undefined behavior"). In such a case,
the port number wasn't set in each entry too, so rework how it's
done.
The issues discovered while resolving archive.ubuntu.com.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Since all in-tree users are good with 4 bytes of user data, reduce the
default to 4. Also fix the default and rage values where apparently
'0' and '8' had been swapped.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce two new "standard" data allocators to net_buf. There are now
three in total:
NET_BUF_POOL_FIXED_DEFINE: This is the closes to the old
implementation, i.e. fixed size chunks. It's also what the old
NET_BUF_POOL_DEFINE macro maps to.
NET_BUF_POOL_HEAP_DEFINE: uses the OS heap
NET_BUF_POOL_VAR_DEFINE: defines a variable sized allocator using
k_mem_pool (this is all that there was in my first draft of this
feature)
Currently the variable length allocators (HEAP & VAR) support
reference counted data payloads, i.e. cheap cloning. The FIXED
allocator does not currentlty support this to allow for the simplest
possible implementation, but the support can be added later if
desired.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Redesign of the net_buf_simple and net_buf structs, where the data
payload portion is split to a separately allocated chunk of memory. In
practice this means that buf->__buf becomes a pointer from having just
been a marker (empty array) for where the payload begins right after
the meta-data.
Fixes#3283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added a new API to get net pkt based on dst address. Destination
address will be used to find correct net_context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_app_ctx has multiple net_contexts, selecting net_context
based on dst address has some glitches.
E.g. One net_app_ctx and two net_contexts (net_ctx1, net_ctx2).
Both net_contexts are mapped to net_app_ctx.
When a caller looking for net_ctx (e.g. net_ctx2) with
matching dst address. Loop goes through net_ctx1 and dst
doesn't match. But another if condition checks does this
net_context mapped to net_app_ctx, yes it matches.
So return net_ctx1, which is wrong.
So first go through all elements in array of net_contexts for
matching dst address, if it fails to find then go for matching
net_app_ctx.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Default network interface is the first interface if there are multiple
interfaces exist. But this creates an issue when different parts of
the network subsystem wants to choose particular default interface.
At-least with this Kconfig option user can select default network
interface.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The code in the LwM2M "Device" object was checking for this max
power source config value, except that it was never added as a
Kconfig option. Let's go ahead and add it so apps can set the
value appropriately.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When attempting to read an unused multi-value resource such as
"Available Power Sources", lwm2m client return a successful coap packet
w/o any values. This looks like a timeout to any lwm2m servers which
make sure a valid response is returned.
Let's fix this by returning the correct NOT_FOUND error code instead.
NOTE: To test this I commented out the portion of the lwm2m client
sample which initializes the LWM2M_DEVICE_PWR_SRC_TYPE_BAT_INT and
LWM2M_DEVICE_PWR_SRC_TYPE_USB values. By default, the sample will
setup dummy values to be returned by the client.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
As per review of PR #5893, this is a follow up patch to update
select_writer() API to match the behavior of select_reader() API.
Quote from OMA-TS-LightweightM2M-V1_0_1-20170704-A. 8.2.5
"An Object Instance or Resource is Read by sending a CoAP GET to the
corresponding path. The response includes the value in the
corresponding Plain Text, Opaque, TLV or JSON format according to
the specified Content-Format (see section 6.4).The request MAY
specify an Accept option containing the preferred Content-Format
to receive. When the specified Content-Format is not supported by
the LwM2M Client, the request MUST be rejected."
Therefore, we do not attempt to assign a content-format when the
requested one is not supported. Instead, we return an error code.
0 is returned when reader or writer has been successfully selected by
select_reader() or select_writer()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Currently, we always set the content-format as "plain/text" when
it is unrecognized. This is wrong for it's possible that payload
is actually something else.
For example, we don't support JSON as incoming format right now.
But if I send a PUT request to /1/0/1 (server objectinstance/lifetime
resource) with value 3200 in JSON format: {"e":[{"n":"","v":3200}]}.
The client will still handle the request and respond with changed (2.04)
except the lifetime resource is updated incorrectly due to parsing
error.
Correct the behavior by not setting a default format and respond with
content-format-not-support error code (4.15)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
net_pkt_append() has been changed. If payload reached max value
of 'data_len' in net packet, net_pkt_append will not append.
So the caller has to create new packet and append remaining payload.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Unlinking of neighbor also needed after nbr_unref. Otherwise
neighbor id is still in use and can not be linked further.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node receives DIO message from peer then node adds peer as
a neighbor (nbr with linklayer address). But when a node receives
DAO message from different peer (chances are peer selected
different route to reach this node), remove peer with previous
link layer address and add as a neighbor with new link layer address
with new route information. Now node can properly route packets to
peer from neighbor table or based on nexthop information from
routing table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a node joins in DAG network, it chooses neighbor (node or border
router) as its parent. But if it receives DIO message from another
peer, it can only act as a neighbor, not as a parent. If peer rank
is better than current preferred parent rank then node will select
new peer as it's best parent.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RPL prints lot of debug information which is difficult to track.
Minimized debugs in timer specific information and parsing of
DIO and DAO options. Also fixed alignment issues (no changes in
functionality)
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Do not even consider the push event if CONFIG_NET_MGMT_EVENT_INFO
enabled and info length is more than NET_EVENT_INFO_MAX_SIZE.
Print error message and ignore the event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current default value for NET_RPL_INIT_LINK_METRIC is 2, changing it
to 1.
e.g. NET_RPL_MIN_HOP_RANK_INC is 256 and NET_RPL_MC_ETX_DIVISOR is 256.
Rank calculation for nodes is
rank_increase = CONFIG_NET_RPL_INIT_LINK_METRIC *
NET_RPL_MC_ETX_DIVISOR;
Which gives 768 for first set of child nodes. It would be good if
CONFIG_NET_RPL_INIT_LINK_METRIC value is 1 and nodes ranks will be
245, 512, 768 based on the path they choose.
User can absolutely change their configuration to maintain proper ranks.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When CONFIG_NET_RPL enabled, do not run DAD (duplicate address
detection) for global addresses. In RPL mesh network global addresses
for nodes are determined by prefix from Border Router. DAD is not
necessary in this case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the route, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CONFIG_NET_MGMT_EVENT_INFO is enabled then provide mgmt info
about the neighbor, which is added or deleted.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove any routes with neighbor as a nexthop first and then remove
neighbor from neighbor table.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_ipv6_prepare_for_send() needs to route packets, it missed
updating of RPL header.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Doing neighbor discovery in RPL network is not necessary and
that can be disabled in RPL nodes. Unfortunately the border
router needs to have ND enabled as it has also non-RPL network
interfaces in use. So in this case, mark RPL node as always
reachable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As this is very specialized info which is not normally needed,
do not print it by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introduce CONFIG_NET_ROUTING option that allows the IP stack
to route IPv6 packets between multiple network interfaces.
No support for IPv4 routing is implemented by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removes variable shadowing another declared
previously but does not change anything
functionally.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
prepare_segment() returned NULL in case of any error, which then
net_context_send() translated into -EINVAL. That's highly confusing
though, because a common case of failure for prepare_segment() is
being unable to allocate data fragment(s) (for TCP header, etc.)
So, return output pkt by reference, and detailed error status as
a return value.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During the CoAP API change, slight changes were made the ref / unref
packet pending process. Let's re-align with the coap-client sample
in how we apply the packet refs in retransmit_request() and also
replace the lwm2m_send_message() call with a direct call of
net_app_send_pkt(). This avoids a second processing of the pending
packets and keeps the ref/unref flow cleaner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
During the CoAP API change, the way packets were ref'd and then
unref'd in order to stop the packet sending functions from releasing
the net_pkts was changed and never updated in the LwM2M library.
Let's use coap_pending_cycle() and coap_pending_clear() to do the
ref/unref the same way as the coap-client samples in order to
match the pending process with the current CoAP APIs.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Fraction could be stored with negative value.
The implementation was only considering the positive value case.
Therefore, we have to modify the code to take care of the case.
To test it
======================================================================
1. launch eclipse/wakaama lwm2m server
2. launch zephyr lwm2m client and wait for registration completed
3. Issue commands from server
* attr 0 /1/0/1 -0.1 0.1
* disc 0 /1/0
Current output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
105 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=0/00000,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Expected output
----------------------------------------------------------------------
Client #0 /1/0 : 2.05 (COAP_205_CONTENT)
102 bytes received of type application/link-format:
</1/0>,</1/0/0>,</1/0/1>;gt=0.1;lt=-0.1,</1/0/2>,</1/0/3>,</1/0/4>,
</1/0/5>,</1/0/6>,</1/0/7>,</1/0/8>
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Add OpenThread to Zephyrs net stack as data link layer.
OpenThread requires to call process function when an event occurs.
This process function is called from cooperative thread.
Packet conversion and dispaching is implemented in openthread.c
as well as addresses forwarding.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
OpenThread requires platform definition with standarized API
so we have to add wrappers to make it compatible with Zephyr.
OpenThread is based on autoconf, this requires
more specific CMakeLists.txt which allows to clone specific
commit or point to local copy of openthread.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that static config is used unless/until DHCP values
arrive. This allows to have the same network configuration values
for both a case of direct board - workstation connection (where
DHCP is usually not available), and a case where both a board and
workstation connect to a router (which serves DHCP).
The changes in this commit however take care of netmask and gateway
settings, but not about IP address itself. This is addressed in the
next patch.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Actually set Zephyr's default DNS server based on the corresponding
DHCP option received. This makes DHCP-based setup Zephyr complete:
now it's possible to connect Zephyr DHCP-enabled system to a typical
router, and it will fully auto-configure to access Internet.
This initial implementation uses just first DNS server address as
returned in DHCP message, it may need to be extended in the future
based on the need.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The offset of the IP header in a received packet depends on the L2
header size. For Ethernet this is 14 bytes which puts the u32 IPv4
addresses on a non-u32 byte boundary. This causes chips that don't
support unaligned access (like the Cortex-M0) to fault.
The fixes in this patch are enough to ping the board and run the
http_server sample.
Signed-off-by: Michael Hope <mlhx@google.com>
For some reason, ieee802154_verify_channel had a device parameter
instead of an iface like all the others.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be up to the user to configure a valid channel, through
net_mgmt, and call net_if_up() in order to get the device up.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on device's band, the upper channel limit can vary a lot in
Sub-Ghz. Thus verifying it directly in L2 before requesting it to the
device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Sub-Ghz bands have different limit of channels. 10, or more than a
thousand is actually possible. Thus the device needs to expose such
limit to the L2 which is unaware of frequency band logic. L2 will
then allow user to select a proper channel.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This field is set and maintained, but not actually used for anything.
The only purpose for it would be to validate ACK numbers from peer,
but such a validation is now implemented by using send_seq field
directly.
Fixes: #4653
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Case #1: If ACK received and our retransmit (i.e. unacked) queue is
empty, it's error. It's incorrect because TCP requires ACK to set for
every packet of established connection. For example, if we didn't
send anything to peer, but it sends us new data, it will reuse the
older ack number. It doesn't acknowledge anything new on our side,
but it's not an error in any way.
Case #2: If retransmit queue is only partially acknowledged, it's an
error. Consider that we have 2 packets in the queue, with sequence
numbers (inclusive) 100-199 and 200-399. There's nothing wrong if
we receive ACK with number 200 - it just acknowledges first packet,
we can remove and finish processing. Second packet remains in the
queue to be acknowledged later.
Fixes: #5504
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per RFC 793:
A new acknowledgment (called an "acceptable ack"), is one for which
the inequality below holds:
SND.UNA < SEG.ACK =< SND.NXT
If acknowledgement is received for sequence number which wasn't yet
sent, log an error and ignore it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As title, we should update the existing observe_node when new attributes
are written from server side. Add the implementation to handle that.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Read notification attributes set by server to setup the
minimum/maximum notification period of a observation request.
2. Reordering to check observe_node duplication first
(bailout earlier)
3. Simplify remove observe_node condition checking
NOTE: attributes are inheritable, priority: res > obj_inst > obj
Reference: LwM2M spec V1_0_1-20170704-A, section 5.1
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Since we've added storing notification attributes written by server.
We can now append these attributes as part of link-format for discover
op.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Implement write-attribute on obj/obj_inst/res according to LwM2M spec
20170704-A, sec 5.1.2. Support pmin/pmax/st/gt/lt parameters on WRITE
operation.
The basic idea is to add sys_slist_t to obj/obj_inst/res structure.
And attach struct lwm2m_attr to the list when attributes are written
from server side (implement lwm2m_write_attr_handler accordingly)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The ICMPv4 handler needs to unref the received echo reply packet
because we are returning NET_OK to caller. Similar change was done
for IPv6 earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of accessing the environment variable ZEPHYR_BASE every time we
require accessing the source code root, use an intermediate variable
that has OS path separators correctly set to '/' to avoid issues on
Windows.
Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External
applications using that will need to change to use the new ZEPHYR_BASE
variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When testing ping6 with net shell, it was noticed that after some
sucessive calls the applications stopped to handle rx packets.
Analyzing other icmpv6 register callbacks it was verified that is
necessary to unref packets before returning NET_OK.
Signed-off-by: Pedro Martucci <pedropaulomartucci@gmail.com>
commit 2a7546fb5a ("net: lwm2m: add support for coap2coap proxy")
erroneously changed the COAP_OPTION_* used to specify the coap2coap
or coap2http proxy resource used from COAP_OPTION_URI_PATH to
COAP_OPTION_PROXY_SCHEME.
Changing it back to COAP_OPTION_URI_PATH requires us to re-order how
the coap options are appended to the packet as the coap options must
be added in the order specified by the numbers in:
https://tools.ietf.org/html/rfc7252#section-12.2
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
CoAP packet w/ confirmation flag set is required to be retransmitted
before it got the ACK message from the peer.
However, the packet is usally unreference once it's sent to the network.
Although we set the timeout as no wait when calling function
net_app_send_pkt(), it's still possible that the packet is unreferenced
before we got a chance to increase the packet reference by calling
coap_pending_cycle().
Usually, the IP stack will generate an ARP packet first and then send
out the packet. However, this is not the case when the remote is a
loopback address.
As issue #5101 described, when asking client to perform a firmware pull
on URL "coap://127.0.0.1:7783/large". The packet will be unreferenced
immediately after calling net_app_send_pkt(). Which then result in
client hang.
The solution to the issue is to increase the reference count on the
sending packet and decrease it after the process is finished.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We shouldn't limit the amount of data appended to RX packets based on
the max send size of TX packets. Skip this check for packets in the
RX slab.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This reverts commit 3599d793c2.
Setting a packet's data_len here doesn't fix the fact that we shouldn't
be using it at all on RX packets. Fix belongs in net_pkt_append().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When testing TLS connections on production web server, it was noticed
that the TLS mainloop was getting "hung" after a connection was made
via HTTPS and then closed by the server. The TLS mainloop was never
being notified that the connection was closed and was stuck waiting
for more data.
The next time that connection was used, TLS would fail to start.
Let's force trigger a closure of the TLS process when the net-app layer
is notified of the connection closure. This allows the connection to
be successfully reused later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The net code doesn't use libc stdio stdout in any way, so there's no
need tweak those options.
Fixes: #5565
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This fixes a bug when calling net_pkt_append[_all] which uses
pkt->data_len as part of the maximum packet length calculation
when the net_context is set.
Without this change the maximum packet length is calculated as 0
(the value of pkt->data_len) and an ENOMEM error is returned.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Commit 753daa6 ("net: pkt: Compute TX payload data length")
removed the default packet setup on incoming packets when they
belong to the rx_pkt pool.
Let's restore this behavior, as MBEDTLS processing in net_app library
needs to use packet family to determine IP header length on
incoming packets.
NOTE: A future cleanup patch could set the IP header length based
on the context IP family. However, there are many places in the code
where this is being set, so care should be taken.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Do not reset net_context information in net_app_close. In case of
TCP behind the curtains connection might wait for some timers to
expire and send some messages (e.g. ACK). If we set source port to
'0', unexpected behaviour might happen with peer connection.
Only reset net_app context related information on net_app_close.
Let net_context_put will take care of proper connection closure.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Right now in FIN_WAIT1 state, if we receive FIN+ACK message, then
tcp state changed to FIN_WAIT2 on ACK flag and immediately on FIN
flag state changed to TIME_WAIT. Then final ACK is prepared and sent
(in queue at-least) to peer. Again immediately state changed to
TCP_CLOSED, where context is freed. net_context_put frees context
and releases tcp connection. Final ACK packet which is in queue
is dropped.
As a side effect of freed ACK packet, peer device keep on sending
FIN+ACK messages (that's why we see a lot of "TCP spurious
retransimission" messages in wireshark). As a result
of context free (respective connection handler also removed), we see
lot of packets dropped at connection input handler and replying with
ICMP error messages (destination unreachable).
To fix this issue, timewait timer support is required. When tcp
connection state changed to TIMEWAIT state, it should wait until
TIMEWAIT_TIMETOUT before changing state to TCP_CLOSED. It's
appropriate to close the tcp connection after timewait timer expiry.
Note: Right now timeout value is constant (250ms). But it should
be 2 * MSL (Maximum segment lifetime).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
fin_timer will be started after sending FIN to peer. After successful
reception of FIN+ACK message in FIN_WAIT1 state, fin_timer should be
cancelled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Of these, only struct net_ipv6_nbr_data::send_ns is a descriptive
change:
send_ns is used for timing Neighbor Solicitations in general, not
just for DAD.
The rest are typo/grammar fixes.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Consolidate and standardize error handling throughout
lwm2m_obj_firmware_pull.c. As well as handle previously
unhandled errors returned from transfer_request().
NOTE: in general, unhandled errors will now result in
RESULT_UPDATE_FAILED. Previously, unhandled errors in
transfer_request() would result in RESULT_CONNECTION_LOST
which might or might not be over-written with another
result later.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The CoAP samples use an MBEDTLS config "config-coap.h" which could be
re-used by the LwM2M sample, except that most servers use a larger
maximum content length setting of 1500 bytes.
Let's add a CONFIG to set this for users of the CoAP lib and set the
CONFIG value for the samples to the 256 size currently used.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, LwM2M firmware download only supports coap2http proxy.
Let's add support for coap2coap proxy as well.
This was tested running Californium demo app cf-proxy on the host
machine with the following setting changed in Californum.properties:
MAX_RESOURCE_BODY_SIZE=524288
Add the following to the samples/net/lwm2m_client/prj.conf:
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_SUPPORT=y
CONFIG_LWM2M_FIRMWARE_UPDATE_PULL_COAP_PROXY_ADDR="coap://[2001:db8::2]:5682"
Build the sample for qemu_x86 as you would normally, but now
you can use a real world coap address to pull firmware using the 5/0/1
resource. The host machine running cf-proxy will pull the remote
resource and then deliver it to the running qemu sample.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
- Add needed settings for DTLS support to the lwm2m_ctx structure.
- Add initialization of MBEDTLS to the LwM2M lib based on the
user application settings in lwm2m_ctx.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The default net_context remote address is scrambled when using a
connection via DTLS. Instead let's use the dtls context remote.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
While looping through possible lwm2m_ctx matches, we're referencing
remote before checking that the context itself is valid.
Also, reduce indentation issues.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of building under the "app" context, let's build the
LwM2M library as a separate static library. This will be helpful
later when adding support for DTLS as w/o this configuration,
the build breaks on MBEDTLS config includes.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This will avoid exposing IEEE 802.15.4 Zephyr's L2 private context data
to unrelevant places.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
L2 specific data and IEEE 802154 net mgmt interface are not related.
Plus, application may use the net mgmt part, not the L2 one. So let's
split the content in relevant headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Content-format is used to determine the type of the PUT/POST
request. Therefore, it's incorrect to assign default when the
caller does not include one in the request.
Define LWM2M_FORMAT_NONE=65535 to indicate the format is missing.
The 65000~65535 is reserved for experiments and should be safe for
the purpose. Check content-type at PUT method to setup
write/write-attrs operation accordingly.
Also, add reporting write-attrs as not implemented to the caller.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification V1_0_1-20170704-A, table 25,
incoming request is a discover op if it is method GET with
accept format as application/link-format
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification 20170208-A, there are two different
discover interfaces supported by the device.
(1) Bootstrap discover (sec 5.2.7.3) (To be implemented)
(2) Device management discover interface (Sec 5.4.2)
- object ID is required (i.e. root directory discover is not allowed)
- attributes should be responded accordingly when implemented
This patch correct the behavior according to the spec and summarized
as follow
(1) Still support CoAP ".well-known/core" but change to report only
first level of the URI.
(2) Respond to caller only when object ID is provided unless it's
bootstrap discover
Fixes#4941
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
IPv6 mcast addr to MAC mcast conversion was factored out to
subsys/net/ip/l2/ethernet.c for reuse by other drivers.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Empty CMakeLists.txt in l2 and l2/ieee802154 deserved to get filled-in
relevantly, instead of centralizing everything in ip/ location.
Also making sure lines don't get over 80 chars.
Also, no need of linking against mbetls unless net shell is enabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
https://tools.ietf.org/html/rfc4862#section-5.4.2 :
"""
Before sending a Neighbor Solicitation, an interface MUST join the
all-nodes multicast address and the solicited-node multicast address
of the tentative address.
"""
So, joining should happen before sending DAD packets, and it should
happen for each unicast address added. This is achieved by joining
from net_if_ipv6_addr_add() call. Note that we already leave
solicited-node group from net_if_ipv6_addr_rm(). In particular, we
leave it if DAD fails (as that function is called in this case).
Fixes#5282.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The reachable calculation for ND is using fractions combined with
integers and getting rounded to very small results (1ms or 0ms).
Let's split up the fraction into it's numerator and denominator
and perform the math in a better way to get the correct results.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The maximum data length that can be appended using net_pkt_append()
should be set to TCP send_mss only if it is smaller than allowed
payload length in net_pkt.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
For calculating amount of payload data that can be added in a packet,
we need to subtract IPv6 or IPv4 header lengths from MTU.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
When net debugging is enabled, the count variable is initialized to -1.
This may cause division by zero if there is only one fragment in pkt.
Solve this by setting the count to 0 and checking the value before the
print at the end of the function.
Successfully tested on STM32F407 SoC.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Compute the length of the TX payload that is transported in one
IPv4 or IPv6 datagram taking into account UDP, ICMP or TCP
headers in addition to any IPv6 extension headers added by RPL.
The TCP implementation in Zephyr is known to currently carry at
maximum 8 bytes of options. If the protocol is not known to the
stack, assume that the application handles any protocol headers
as well as the data. Also, if the net_pkt does not have a
context associated, length check on the data is omitted when
appending.
Although payload length is calculated also for TCP, the TCP MSS
value is used as before.
Define IPv4 minimum MTU as 576 octets, See RFC 791, Sections 3.1.
and 3.2.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In 90b471fe4, there was a change to make k_poll() return EINTR error
if it was cancelled with k_fifo_cancel_wait(). Handle this change, or
otherwise sockets EOF handling was broken.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, the connection will be reset easily due to a forged TCP
reset with a random sequence number.
As described in RFC793 p.69, we should check if the sequence number
falls into the receiver window at first.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Add in6addr_any and in6addr_loopback which are defined in RFC2553 Basic
Socket Interface Extensions for IPv6.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Previously, if passive close is peformed, the net context is released
after FIN is received and FIN,ACK is sent. The following last ack from
the peer will be treated as an improper packet, RST is sent to the peer.
This patch refines tcp_established() by centralizing the tcp state
transition and releases the net context only if NET_TCP_CLOSED is
reached.
Besides, the logic that releases the net pkt without appdata (i.e. ACK
or FIN) is moved from packet_received() to tcp_established(). This makes
packet_received() less dependent on the protocol and make the usage of
net pkt more clear in tcp_established().
Fixes: #4901
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If net_context_recv() returns a error, net pkt will not be released. For
example, net_context_recv() returns -EBADF because the TCP connection is
closed by the peer.
Handle the return value instead of using SET_ERRNO().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If we cannot send a DHCP message, then unref the net_pkt
in order to avoid a buffer leak. Earlier we tried to
unref NULL net_pkt which is not correct.
Signed-off-by: june li <junelizh@foxmail.com>
Token is missing when we jump to the error and token is not yet setup.
To correct it, we grab the token from the input packet at the beginning
of the handle_request()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Copy/paste error was checking minimum measurements where it
should have been checking maximum measurements.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Initial values for the min/max measurements were 0 and this caused
issues with sensors maximums that weren't above 0 and minimums that
went below 0. Let's update those to MAX_INT so the first sensor
value update will set those to correct values.
When resetting the measured values, let's use the current sensor
value not 0.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The original fragment chain of incoming packet will be lost and leaked
in case of early error, add frag back to packet and
let the caller do unref.
Fixes#4323
Signed-off-by: june li <junelizh@foxmail.com>
No need to do any IPv6 neighbor checks if the packet is routed back
to us by loopback driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is loopback interface, then let it handle all local
traffic. Loopback interface is only needed for test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the packet is too short, the TCP header pointer might be
NULL. In this case we just need to bail out.
Coverity-CID: 178787
Fixes#4787
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
802.15.4, as other radio tech, works in little endian on network level.
To keeps things simple, the inner context per-interface, stores the
extended address that way. But it can be confusing in shell then, so
let's work handle these addreses through EUI-64 format there.
Fixes#4936
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Logic for sending chunks of data is incompatible with adding
Content-Length: header.
Per https://tools.ietf.org/html/rfc7230#section-3.3.1:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Going a bit further in my mind: also don't send Transfer-Encoded
chunked data either when the Content-Length header is present.
In general, there will be problems if the http client library
makes payload changes without the user code knowing about it.
This patch removes the use of http_send_chunk() from the new
HTTP client code and instead sends the payload directly to
http_prepare_and_send()
This fixes an issue where every available buffer would be allocated
with repeating payload data because the for loop in http_request()
wasn't ending until we ran out of memory.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We should not use the user suppied timeout setting in
http_client_send_req() for the connection timeout. In the
previous API the call to tcp_connect() used
CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT as the timeout setting.
Let's do that here too.
This fixes -ETIMEDOUT error generation when using K_NO_WAIT
for http_client_send_req().
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Add status error string when sending a error message from
HTTP server to client as described in RFC 2616 ch 6.1.
Previously only error code was sent except for 400 (Bad Request).
This also fixes uninitialized memory access in error message.
Coverity-CID: 178792
Fixes#4782
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ping command was not checking if the user gave target
host as a parameter. This would lead to NULL pointer access.
Fixes#4827
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we were asked to add 10KB to a packet, adding it won't help -
such packet won't be even sent by hardware on our side, and if
it is, it will be dropped by receiving side. So, make sure we
never add more data than MTU as set for the owning interface.
This actually gets a bit tricky, because we need also to account
for protocol header space. Typically, when net_pkt_append() is
called, protocol headers aren't even added to packet yet (they
are added in net_context_send() currently), so we have little
choice than to assume the standard header length, without any
extensions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When sending a packet with AR flag set, the ACK frame that should be
replied to it must holp the same sequence number, so let's verify this
properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will be place where validating only this part of the frame will be
necessary. This will avoid to run the little bit heavier
ieee802154_validate_frame().
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Add a generic function for TCP option parsing. So far we're
interested only in MSS option value, so that's what it handles.
Use it to parse MSS value in net_context incoming SYN packet
handler.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Calculates full TCP header length (with options). Macro introduced
for reuse, to avoid "magic formula". (E.g., it would be needed to
parse TCP options).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
MSS is Maximum Segment Size (data payload) of TCP. In SYN packets,
each side of the connection shares an MSS it wants to use (receive)
via the corresponding TCP option. If the option is not available,
the RFC mandates use of the value 536.
This patch handles storage of the send MSS (in the TCP structure,
in TCP backlog), with follow up patch handling actual parsing it
from the SYN TCP options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The commit 971da9d0 ("net: pkt: adjust_offset: Simplify and optimize
code") changed the adjust_offset() function but left the error print
intact. This print is now invoked even if there is no error which
looks bad in debug prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The addrlen of accept() and recvfrom() is a value-result argument. It
should be updated to the actual size of the source address after
calling accept() and recvfrom().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Update the firmware update_result accordingly by checking return
value of the firmware data write callback registered by application.
Also, set response code according.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The expire function can call net_context_unref() which tries to
get a semaphore with K_FOREVER. This is not allowed in interrupt
context. To overcome this, run the expire functionality from
system work queue instead.
Fixes#4683
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An edge condition was handled in a special way, even though the main
condition covered it well. More code, more jumps == slower code,
bigger binaries.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that net_buf has "native" support for sys_slist_t in the form of
the sys_snode_t member, there's a danger people will forget to clear
out buf->frags when getting buffers from a list directly with
sys_slist_get(). This is analogous to the reason why we have
net_buf_get/put APIs instead of using k_fifo_get/put.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code parsing received net pkt to get source or destination
sockaddr repeats multiple times in net_context.c.
Eliminate the duplication by net_pkt_get_src_addr() and
net_pkt_get_dst_addr() which can handle different internet protocol
(i.e. ipv4 or ipv6) and transport protocol (i.e. tcp or udp)
Fixes: #4421
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Rename net_pkt_get_src_addr() to net_pkt_get_addr() and make it able to
handle source or destination address.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
A regression by commit 9728179757 ("Allow net_context re-connect").
The code did not create IPv4 listener if IPv6 listener was successfully
created.
Fixes#4697
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should call coap_update_from_block() which will determine the minimum
size of the BLOCK1 SIZE between server/client and update the current
offset and total size(if available) accordingly.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Add a net_buf_id() API which translates a buffer into a zero-based
index, based on its placement in the buffer pool. This can be useful
if you want to associate an external array of meta-data contexts with
the buffers of a pool.
The added value of this API is slightly limited at the moment, since
the net_buf API allows custom user-data sizes for each pool (i.e. the
user data can be used instead of a separately allocated meta-data
array). However, there's some refactoring coming soon which will unify
all net_buf structs to have the same fixed (and typically small)
amount of user data. In such cases it may be desirable to have
external user data in order not to inflate all buffers in the system
because of a single pool needing the extra memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Previous max range value for RTO was 2 seconds, increase to 60 seconds
as setting larger values can be useful when debugging retransmission
issues on slow networks.
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
Due to parameters used, net_context_recv() call cannot fail (it just
installs a callback, no I/O performed).
Coverity-CID: 178247
Fixes: #4581
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add option to set initial Retransmission Timeout value. The value is
different from NET_TCP_ACK_TIMEOUT since latter affects TCP states
timeout when waiting for ACK for example.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If we receive lot of data fragments, then yield after initial
processing so that TLS thread can start to work on these.
If we do not yield here, we pile up data buffers and might run
out of memory more easily.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might happen in TCP client, that the TCP connection is terminated
in which case net_context is freed. Check this and mark corresponding
net_context inside net_app to NULL. This way there will be no issue
to access already freed net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The client TLS code did not handle server issued close properly.
Now the connection is terminated properly and TLS thread is left up to
wait more requests from the user.
This commits adds new boolean field to net_app context. Because there
are already multiple boolean flags there, convert them all to bitfields
to save space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the TLS handshake might take long time before connection is ready,
check this before trying to send user data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information that we are sending plain data and receiving
encrypted data, the code claimed that we are sending encrypted
data which is not the case here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user closes the client connection, then make sure that
user can just call net_app_connect() instead of calling the
client init. The client initializes everything in net_app but
for simple re-connect that is not necessary.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that objects and samples have their return values fixed, let's
propagate them back up to the user if there's an error.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, post_write and execute callbacks returned 1 when handled
and 0 for error condition. However, this wasn't detailed enough and
the engine can't propagate any sort of error back to users -- so it
doesn't even check the return values in many cases!
Let's adjust the resource callback functions of all objects and the
lwm2m_client sample to return 0 for success or a valid error code.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that we can access resource data in the lwm2m subsys, let's use
the user provided firmware push buffer (5/0/0) to also store the
firmware pull data.
This way the size of the firmware pull buffer is completely up to the
application.
NOTE: This patch adds a 64 byte firmware buffer to the lwm2m_client
sample for this purpose.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With the change to support multi-fragement buffers in the LwM2M subsys,
the OPAQUE data type was direct write methods were broken.
Let's fix OPAQUE handling by using the newly introduced getter methods
which can use multiple user callbacks (depending on the size of the
user provided buffer). Let's also add public methods for users to set
/ get OPAQUE data in resources for future use with DTLS key data.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The lwm2m_engine_get_resource() function needs to be made available to
other portions of the lwm2m subsys in order for firmware resource data
to be used in the future.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During conversion from the ZoAP to CoAP APIs the use for this variable
was removed, but the variable itself was left in place.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
No need for 2 different defines to specify URI lengths in the source
for firmware pull method. Let's combine them.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Each content formatter should have a way of handling opaque data.
For instance TLV data will individually be able to specify a length
but plain text will take up the rest of the packet.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The existing LwM2M framework expected contiguous buffers and this
was the reason for the 384 byte buffer sizes. This was previously
a limitation of the ZoAP API. The new CoAP API doesn't have this
limitation and the LwM2M library has already been migrated to use
it.
Let's finish the process by replacing any contiguous buffer handling
with the correct net_pkt APIs to parse across multiple fragments.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
application/octet-stream is used to indicate opaque payload format.
Use plain text handler to handle the opaque format.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
The call to net_context_recv() with timeout returned -ETIMEDOUT
even when data was returned properly and there was no timeout.
Fixes#4565
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In bind_default(), a local variable is passed to find_available_port().
However, the port number is unpredictable as it's not initialized and
will be used directly if not zero. This will lead to problems if the
port number is already used.
This patch makes find_available_port() always returns an available port
regardless of the port number in the sockaddr parameter.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
This rework commit 77b8f5c1f6
Comparing it to BT IPSP is a the wrong comparison: BT IPSP does specify
6lo/ipv6 for it to work. Whereas 802.15.4 does not.
Instead of selecting 6lo from 802.15.4's Kconfig, let's do the reverse
way. If the user enabled 802.15.4 and IPv6 as well (to which 6lo
depends on), then 6lo is enabled by default as using IPv6 on 15.4
without it does not make much sense.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When the header file is located in the same directory as the source
file it is better to use a relative quote-include, e.g.
than a system include like
Avoiding the use of system includes in these cases is beneficial
because;
* The source code will be easier to build because there will be fewer
system include paths.
* It is easier for a user to determine where a quote-include header
file is located than where a system include is located.
* You are less likely to encounter aliasing issues if the list of
system include paths is minimized.
Authors:
Anas Nashif
Sebastian Bøe
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Recent commit fb7f6cfa97 ("net: lib: http: Fix invalid pointer
body_start") introduced logic to reset the response body_start pointer
when the response buffer was reused.
This check needs to be fixed so that it doesn't arbitrarily change
body_start when not needed.
The problem with the current check can be demonstrated by not setting
a response callback for request which generates a large response
spanning multiple packets.
In this case body_start is still valid (not reusing the response buffer
because there is no callback set), but it will be changed when the 2nd
packet is received and the "at" marker is located at the head of the
new packet (!= response_buffer).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When moving to the new CoAP API, I thought we would need to parse
incoming option values longer than 12 characters.
This hasn't proven to be true, so let's remove the auto-selection of
this config. If needed user can set this option later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Currently, we check the length of an option value in the
coap_packet_append_option() function. This isn't required as
we're appending to a net_pkt and not using struct coap_option
where the limitation is imposed.
Instead, we should check the option value length in
parse_option() where we assign the value to a struct
coap_option.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Inform user if we could not install receive callback after
a connection is created in net-app client.
Coverity-CID: 178246
Fixes#4582
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Inform user if we could not install receive callback after
a connection is accepted in http server.
Coverity-CID: 178244
Fixes#4584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of memory, then net_pkt might be null and we must
not access it.
Coverity-CID: 178235
Fixes#4593
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The body_start field at http_client_ctx.rsp is used to check if this
fragment contains (a part of) headers or not.
If the device recived more than one fragment in one http response,
may cause re-use of the result buffer in function on_body().
Once the device re-use the result buffer, the body_start that point
to this buffer address will no longer be valid.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Oftentimes, 15.4 PAN IDs are specified in hex. For example, that's
how Zephyr config specifies the default value. So, print them also
in hex, to avoid confusion.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Remove the RD client's stack in favor of using the engine's periodic
service to trigger RD client events. This saves 5K RAM of stack based
memory.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Remove the stack from the device object and instead make use of
the periodic engine service which will trigger the device service
when it's ready.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Stacks cost a lot of RAM in Zephyr. We have 3 total stacks in
the LwM2M lib. We can remove 2 of these if add a service handler
into the main LwM2M engine. Each service can register with this
handler so that they can be called based on their own periodic
timer. The handler itself will search through these registered
services and call them when they become due otherwise sleep
until another is ready.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's use conservative defaults for the LwM2M library to enable
hardware with constrained resources. Users can increase where
necessary.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's use snprintk for simple formatting to allow for possible disabling
of printf and protect calls to sprintf from string overruns.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When using Leshan REST API to perform a discover OP on a client, only an
accept field is sent with "application/link-format". Current logic uses
the content-type to determine when a discover OP is indicated. Let's
handle this case as well.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
There were decrements of TCP sequence numbers, inherited from FNET
stack implementation, as was used as an initial base. RFC793 does
not specify conditions for decrementing sequence numbers, so such
decrements are an artifact of FNET implementation. In Zephyr code,
we had to compensate for these decrements by extra increments
(including an increment-by-2). So, remove decrements and associated
extra increments to simplify the code.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's rename lwm2m_release_message() to lwm2m_reset_message()
and add a parameter to let the function know whether or not to
release the lwm2m_message resource back to the pool.
By adding the optional release parameter, we can keep the
lwm2m_message but reset the underlying net_pkt / net_buf resources.
This allows us to regenerate the net_pkt after determining
an error has occured. In this case, we don't want the previously
added net_pkt contents but we do want to maintain the message id,
token, etc.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This patch moves from the ZoAP API in subsys/net/lib/zoap to
the CoAP API in subsys/net/lib/coap which handles multiple
fragments for sending / receiving data.
NOTE: This patch moves the LwM2M library over to the CoAP APIs
but there will be a follow-up patch which re-writes the content
formatter reader / writers to use net_pkt APIs for parsing
across multiple net buffers. The current implementation assumes
all of the data will land in 1 buffer.
Samples using the library still need a fairly large NET_BUF_DATA_SIZE
setting. (Example: CONFIG_NET_BUF_DATA_SIZE=384)
Signed-off-by: Michael Scott <michael.scott@linaro.org>
From RFC 7252, section 3
"The absence of the Payload Marker denotes a zero-length payload.
The presence of a marker followed by a zero-length payload MUST
be processed as a message format error."
Check empty payload when COAP_MARKER is found and add a test case to
cover it
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Options parsing helpers functions unable to handle the malformed
packets and dropping it. Improved parsing functionality to handle
malformed packets. Also payload marker is not mandatory in CoAP
packets when there is no payload. Exit gracefully when CoAP
packet contains only options.
Fixes#4396.
Coverity-ID: 178060
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We need to skip protocol headers when setting pointer to
application data when receiving TLS data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled CONFIG_NET_DEBUG_APP, then the debugging
version of _net_app_select_net_ctx() was not properly declared
and it caused compile error.
Fixes#4481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a neighbor solicitation which does not have any
options, then there is no need to assert this condition as that
is a perfectly valid use case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IEEE 802.15.4 reassembly function ieee802154_reassemble() returns
anything other than NET_CONTINUE, then drop that packet. Earlier
it only dropped the packet if NET_DROP was returned but the reassembly
might also return NET_OK. In that case the pkt is freed already and
pkt->frags pointer is NULL. This caused NULL pointer access in L2 when
packet was received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is similar to how few commands already behave if they can
provide additional info to the user if particular config options
are enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_tcp_data() and net_pkt_udp_data() simply returns the start
address of the header. However the header may span over multiple
fragments, unexpected data or memory corruption might happen when
reading or writing to the pointer directly.
Use net_tcp_get_hdr() and net_udp_get_hdr() instead.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
The net_tcp_get/set_hdr() and net_udp_get/set_hdr() documentation
was not clear in corresponding header file. Clarify how the return
value of the function is supposed to be used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
udp.h is out-of-date as it accesses net buf directly. In 3604c391, it
has been replaced by net/udp.h and udp_internal.h
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Previously net_pkt.h, defined macros NET_PKT_TX_SLAB_DEFINE,
NET_PKT_DATA_POOL_DEFINE, but advertised them as intended for
"user specified data". However, net_pkt.c effectively used the
same parameters for slabs/pools, but this wasn't obvious due
to extra config param redirection. So, make following changes:
1. Rename NET_PKT_TX_SLAB_DEFINE() to NET_PKT_SLAB_DEFINE()
as nothing in its definition is TX-specific.
2. Remove extra indirection for config params, and use
NET_PKT_SLAB_DEFINE and NET_PKT_DATA_POOL_DEFINE to define
system pools.
3. Update docstrings for NET_PKT_SLAB_DEFINE and
NET_PKT_DATA_POOL_DEFINE.
Overall, this change removes vail of magic in the definition of
system pkt slabs/pools, making obvious the fact that any packet
slabs/pools - whether default system or additional, custom - are
defined in exactly the same manner (and thus work in the same manner
too).
Fixes#4327
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When hexdumping the packet, print also information if we
received / transmitted packet. Also print information if the
hexdump is before compression or not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If building a server that does not support TCP, then the
get_server_ctx() is not needed and thus needs to be compiled out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Explicitly note that while these functions return pointers to
headers, the headers themselves may be fragmented into different
data fragments. 1a2f24f920 is an example where this might have
been overlooked.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't use names like "strlen" for parameters. Try and name buffer
parameters consistently.
NOTE: For several functions I removed "const" flag. This is
intentional and will be needed in upcoming patches.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Remove some left over TODOs and also fix a TODO where we need to return
the appropriate error code to generate a 4.05 response.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This calculation reads the length portion of the COAP header to determine
the length of the coap packet. However, when encrypted via DTLS this
value seems to be getting corrupted. Let's change this calculation so
that it will work for when DTLS is both enabled and disabled. Use the
total length of the fragment data and substract back out the headers
to get a correct value.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When source address is unspecified then SAC is 1 and SAM is 00.
Uncompression does not process because context based compression
is not enabled.
Special case (SAC:1 and SAM:00) should be handled without context
based compression support.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add system workqueue information prints to "net stacks" command.
This helps debugging when figuring out which stack is running out
of space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enhance existing "net app" command so that it can be
used to show information about multiple connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we get MAC verification error in handshake, it could be that
everything is fine but we ran out of heap memory in mbedtls.
In this happens, suggest the user to check amount of memory
in mbedtls as it might just fix the issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we select net_ctx, it is useful to see who actually called
the _net_app_select_net_ctx() when debugging the call flow.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sometimes when sending network packet, the wrong net_context was
selected which prevented data to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should not close the TLS connection immediately if the TLS
data is not yet sent. So if user calls net_app_close() and we
still have data pending, then send the TLS data and only after
that close the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As there can be multiple listening network contexts, it should
be possible to close one of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server is able to listen and serve multiple incoming
connections. This commit does not add support for multiple
incoming TLS connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The stack of rd client is exhausted while running lwm2m client w/ IPv6
and network log global enabled. Increase the stack size to 1536 when
NET_LOG_GLOBAL is enabled.
Detail described at #4424
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
".well-known/core" is mainly used with method GET for performing the
resource discovery (RFC 6690). Since we are implementing a LwM2M client
and is not implement a resource directory which allow others to do the
resource registration (POST to .well-known/core). Only GET method is
allowed for the usage. Report 4.5 (Method Not Allowed) if other methods
are requested.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Modify zoap_options_to_path() to return error when URI contains
character other than digits and return 4.04 NOT FOUND to caller.
PATH such as "/1a/2/3" was treated as "/1/2/3" after parsring
which is incorrect.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Return 4.05 Method Not Allowed when path is empty ('/') to the
caller for it's only use by bootstrap delete. This change also avoid the
empty path being treated as request targeted at 0/0/0.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1) Respond NOT FOUND to caller when object doesn't exist
2) Report as internal server error when OP not handled
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Such option should be use carefully. Printing out in/out packets is
extremely verbose.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the pkt is corrupted and the offset would be larger than
the actual packet length, then print information about that and
drop the packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Applications may want to be notified when various events
happen in the LwM2M rd client. Let's implement an event
callback which sends: connect, disconnect and update events.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
CoAP allows a proxy to be used when transferring data (CoAP-CoAP and/or
CoAP-HTTP) by creating request on a specific URI path and by using the
Proxy URI CoAP option. Create specific Kconfig options for the proxy
server address and port, until a parser gets implemented.
Code tested with Californium acting as CoAP proxy.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
[michael.scott@linaro.org: rebased on net_app + lwm2m_message
refactoring + firmware update changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During firmware download via block-wise transfer, we can see
packets occaionally get re-transmitted (normal logic in the
pending / retry functions). However, both of these packets
end up coming through the reply handler and we should ignore
any block-wise transfer that has a current value less than
where we expect to be.
NOTE: This fixes K64F ethernet transfers where we were getting
too many packets back in the handler.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
UDP packets can be lost in heavy traffic. Normally we can handle this
with pending packet processing for packets which have not been responded
to with an ACK. However, due to the time it takes for firmware to
download via CoAP, an extra level of retries should be added.
The process works like this:
Normal pending packets will try to send 3 times fairly quickly.
If that fails, then the timeout callback is called for the firmware
download process. A retry counter is incremented and the timeout
callback perform a new packet send of the block-wise transfer
packet that is missing, until the retry counter hits a limit (3)
and then the transfer is aborted.
This allows for a longer "outage" to happen during firmware transfer
and the process can still succeed.
NOTE: This patch does not fix a current bug where the pending process
is not re-sending the packets correctly, it only makes the process
more stable with a better chance to work.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When a packet expires after the pending retries we call
lwm2m_release_message() to free up resources. This includes
cleanup of the pending structure which calls net_pkt_unref on
the pending packet. This would normally free up the packet
memory. However, earlier in the pending processing we add a ref
to the packet so that normal send processing doesn't free up
the memory. This meant we were leaking packet memory every
time we had an expiration due to timeout.
Let's do an unref prior to calling lwm2m_release_message() to
make sure the packet memory is freed correctly.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, firmware support wasn't initializing the retransmit work
or the extra network packet pools. Let's fix that.
NOTE: While this fixes the setup of retransmit work, the actual
attempts to re-send packets which are pending is failing. Needs
another follow-up fix.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Create an internal function lwm2m_engine_context_init() which sets
the extra packet pools and initializes retransmit work internal to
the LwM2M engine.
This function will be used by firmware pull support which establishes
a new LwM2M context for downloading firmware.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In the case of a proxy server translating HTTP -> COAP (known in
the code as "separate reply"), we were leaking lwm2m_message structures.
This was due to pending objects being cleared out during the first ACK,
and no other way of finding a matching message when the follow up packet
was received. Let's add a second match for reply to make sure we can
find our matching message resources.
NOTE: This change renames find_msg_from_pending() to find_msg() and
makes it a static function as it's only used by the lwm2m_engine.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is a useful message announcing that the RD client state machine
is starting for a particular connection. If the log level is set
low so that DBG messages are hidden, then this message goes away.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
1. Add handling block1 option in handle_request(). The basic idea is
to declare structure block_context at compiled time and use "token"
as a key to pick up the on-going block cotext. It should be able to
support multiple blockwise transfer concurrently
2. Use write callback implemented in lwm2m_obj_firmware to deal w/ the
update state transition and than call the callback registered by the
application
3. move default_block_size to lwm2m_engine.c to share between
lwm2m_engine and lwm2m_obj_firmware_pull
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on LwM2M net_app changes.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
OPAQUE resource type might/might not have data_ptr/data_len setup
depending on the implementation. This introduce an issue that when
OPAQUE resource is written from the server side, the ones w/ none
setup will not be able to get the data at post_write_cb()
Modify to setup data_ptr/data_len as incoming buffer and buffer size
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
1. Parse firmware pull URI
2. Add lwm2m_firmware_get/set_update_cb() for application to register
callback. This is because we want to check the update_state before
we pass to the application
3. Add lwm2m_firmware_get/set_update_result() and
lwm2m_firmware_get/set_update_stat() to manage the state transition
as well as the sanity check
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: rebased on net_app framework and
lwm2m_message refactoring.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With future patches we will need to parse URLs in the registration
client and firmware object. Enable it by default when LWM2M is
enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If there is no connection to server, then _net_app_select_net_ctx()
will return NULL. This is perfectly fine and we can just continue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the remote address to determine what address family to bind.
This prevents extra context to be created. In order to avoid
parsing the peer address string multiple times, the client
init function is re-factored.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some doxygen directives were missing from dns_pack.h file.
Also make function header documentation look better.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This creates mDNS responder and serves configured IP addresses
to the callers which want to resolve .local addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure hostname of the device in Kconfig. This can
be used by mDNS responder to answer <hostname>.local queries.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context_sendto() returns an error if dest address is NULL.
If dest address is available, net_conext_sendto() should be used.
Otherwise, net_context_send() should be used.
Fixes#4347
Signed-off-by: Aska Wu <aska.wu@linaro.org>
With the introduction of CoAP and other protocols, URL parsing is
be needed when HTTP_PARSER is not. Let's split out the existing
functionality of URL parsing into it's own CONFIG and let
HTTP_PARSER use it by automatically selecting HTTP_PARSER_URL when
HTTP_PARSER is enabled.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When CONFIG_STDOUT_CONSOLE is not selected, there is no printk()
function. An alternative (printf) must be used.
This fix was taken from tests/crypto/mbedtls/src/mbedtls.c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
It's possible to get number of free pkts/buffers with just
CONFIG_NET_BUF_POOL_USAGE, whereas CONFIG_NET_DEBUG_NET_PKT
depends on CONFIG_NET_LOG and adds quite a bunch of other
overhead. Also, give a hint that this option should be enabled
to get free buffer numbers.
Additionally, use unambiguous "Total" wording to represend the
maximum capacity of data structures, instead of previous "Count".
"Count" (or at least counter) is intuitively something which can
change, so not seeing any other numbers, it's very easy to assume
that it's actually number of free buffers (because that's the
information a user may be interested in in many cases).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the caller has passed net_pkt to prepare_segment(), then
it is caller responsibility to unref it in a case of error.
Fixes#4292
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some chips are smart enough to handle the ACK request flag on
transmitted frames, so it's unneccessary for the L2 to wait for it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is both required in L2's radio part as well as it might be useful
on some ieee802154 radio drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These are now fully replaced by set_filter() thus removing their usage
by the L2 layer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the hw supports filtering, L2 will apply the ieee address, short
address or PAN ID filters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using radio's get_capabilities, it is possible to know if the driver can
get CSMA work handed-over.
For now, up to device drivers to use
CONFIG_NET_L2_IEEE802154_RADIO_CSMA_CA_* parameters.
Let's see if it will be interesting at some point to enable runtime
modification of these parameters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of hard coded 1280 bytes MSS, use the MTU of the link
for MSS. The minimal MSS is still 1280 which is mandated by
IPv6 RFC.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding net_mgmt_event_notify_with_info() which lets the event notifier
to pass dedicated data along with the event. The size of data that can
be passed must be limited to the biggest data passed (which will be
currently IPv6 + prefix).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current coap library fails to parse or prepare if packet is more
than one fragment. Added support to handle multi fragment packet.
Also well-known/core api used to prepare coap packet and send it
through net context api immediately. This is goind to be problematic
if user doesn't enable net context. Also user can not encrypt coap
packets. Now api will return prepared coap packet to application.
Application will send it to peer.
Jira: ZEP-2210
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ZOAP library has certain limitations in parsing and preparation of
coap messages. It can handle only on single network fragment. If
network packet is split between multiple fragments it fails. This
patch is just copy and rename of 'zoap' to 'coap'.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
802.15.4 IP-based networking requires 6LoWPAN layer and won't work
correctly without it. So, if NET_L2_IEEE802154 is select,
automatically select NET_6LO. This is similar to what BLE L2
does (NET_L2_BT causes selection of NET_6LO).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is similar to the changes made previously to other network
components: if user selected NET_LOG_GLOBAL, they really mean
they want logging (first of all, error/warning logging) across
the entire network stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Due to timeout checking the minimum lifetime must be 15 seconds,
and we're storing the lifetime as an unsigned short so set the
maximum to 65535.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Callbacks are setup for the following states:
- ENGINE_DO_BOOTSTRAP
- ENGINE_DO_REGISTRATION (first registration)
- ENGINE_REGISTRATION_DONE (subsequent client updates)
- ENGINE_DEREGISTER
In most cases, if a timeout occurs the registration engine goes back to
ENGINE_INIT. The exception is a timeout during client update, which
forces the state machine back to ENGINE_DO_REGISTRATION (skipping a
boostrap).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Sending an lwm2m message is too difficult. It requires pending / reply
and other structures to be configured and set by various portions of
the library. There is also no way to know if a pending message ever
encounters a timeout.
Let's fix this by simplifying the internal LwM2M engine APIs for
handling lwm2m messages:
1. A user calls lwm2m_get_message(lwm2m_ctx) which returns the first
available lwm2m message from an array of messages
(total # of messages is set via CONFIG_LWM2M_ENGINE_MAX_MESSAGES).
2. Next the user sets all of the fields in the message that are
required (type, code message id, token, etc)
3. Then the user calls lwm2m_init_message(msg). This initializes the
underlying zoap_packet, pending and reply structures.
4. Once initialized, the user creates their payload in msg->zpkt.
5. When the user is ready to send, the call lwm2m_send_message(msg).
6. And if for some reason an error occurs at any point, they can free
up the entire set of structures with: lwm2m_release_message(msg).
Included in the refactoring is a timeout_cb field which can be set in
the LwM2M messages. If a pending structure ever expires the engine
will call the timeout_cb passing in the msg structure before it's
automatically released.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead of using a magic reference to 8 for token length, let's
establish a define for MAX_TOKEN_LENGTH and then use it for both
variable definitions and to make sure tokens are valid. Also,
Correct the handling of a special token length value (0xFF) which
lets lwm2m_init_message() know to skip token generation. We were
using a -1 value here previously (on a u8_t variable).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When the net-shell needs to send something to network interface,
it will check if the target address is found in neighbor cache and
then use that network interface. If the address is not found in nbr
cache, then the default interface is used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some our Zephyr tools don't like seeing UTF-8 characters, as reported in
issue #4131) so a quick scan and replace for UTF-8 characters in .rst,
.h, and Kconfig files using "file --mime-encoding" (excluding the /ext
folders) finds these files to tweak.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
send()/sendto() aren't "front facing" functions, so when user calls
them, context type hopefully should be already validated by other
functions. They are also on critical path of app/network performance,
so getting rid of extra check helps a little bit too. This also
fixes a warning of "err" possibly being used non-initialized.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The implementation is based on net app API. It sends the request and
parses the server reply by following some suggestions mentioned in the
secion "SNTP Server Operations" of RFC 4330.
The system uptime is used as the transmit timestamp of client request
This lib can work on those devices without RTC.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
sendto() and recvfrom() are often used with datagram socket.
sendto() is based on net_context_sendto() and recvfrom() is based on
zsock_recv() with parsing source address from the packet header.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
This patch makes net_context_sendto() work independently without calling
net_context_connect() first. It will bind default address and port if
necessary.
Also, since receive callback should be provided before sending data in
order to receive the response, bind default address and port to prevent
providing an unbound address and port to net_conn_register().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Introduce net_pkt_get_src_addr() as a helper function to get the source
address and port from the packet header.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Other parts of the networking subsystem may use net_pkt_ip_hdr_len() on
a packet that has been encrypted for use with DTLS. Let's restore that
value here so those areas don't receive an erroneous 0 value.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The IPv6 address parameters in net_ipv6_send_na() can be const
as the function will not modify them. This avoids compile warning
about parameter constness.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to return the neighbors in net_ipv6_nbr_foreach()
groupped by network interface. This way the caller has them
already in proper order and does not need to re-group them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was no handler functions for adding, removing and looking up
IPv4 multicast addresses in the network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user tried to bind to IPv4 multicast address, then the
operation failed and returned error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network interface does not support IPv4 like IEEE 802.15.4
or Bluetooth, then do not print IPv4 information for those interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the data parameter in net_pkt_insert() is NULL, then just
insert amount of data but clear the area instead of copying.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User was able to tweak IPv6 hop-limit so introduce similar
feature for IPv4 Time-To-Live value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the caller of http_client_send_req() sets the timeout to
K_NO_WAIT, then the function would still wait for a while before
returning to the caller.
Jira: ZEP-2624
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code was accessing wrong neighbor data when it received DAO
message. This corrupted nbr->iface pointer which was clearly seen
by "net nbr" shell command. The corruption then caused random
crashes or hangs when network interface via that pointer was
accessed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the ethernet packet destination MAC address is NULL when sending
IPv4 multicast or broadcast packet, then we must set it as otherwise
we might to access NULL pointer data.
Fixes#1544
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds a new state NET_IPV6_NBR_STATE_STATIC which never timeouts
which is required in case of RFC 7668 which doesn't allow publishing
the address:
https://tools.ietf.org/html/rfc7668#section-3.2.3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In a case gateway is not set drop packet early otherwise bogus
ARPs for 0.0.0.0 are sent.
...
[net/arp] [DBG] find_entry: (0xa8006720): dst 0.0.0.0
[net/arp] [DBG] find_entry: (0xa8006720): [0] iface 0xa800cd80 dst
0.0.0.0 ll 00:00:00:00:00:00 pending 0xa800a7c0
[net/arp] [DBG] find_entry: (0xa8006720): ARP already pending to
0.0.0.0 ll 00:00:00:00:00:00
[net/arp] [DBG] net_arp_prepare: (0xa8006720): Resending ARP
0xa800a380
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If IPv6 is disabled, then it is useless to try to resolve
IPv6 address because "struct sockaddr" does not have enough
space to store IPv6 address.
Fixes#1487
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to clone just the net_pkt which does not have any
data fragments linked to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is useful to enable error/warning logging across the net
codebase (less useful for debug level logging, but that's true
for CONFIG_NET_LOG_GLOBAL already).
Implementation-wise, instead of keeping adding to long list of
"select"'s in CONFIG_NET_LOG_GLOBAL and thus introduce component
inter-dependencies, add "default y if NET_LOG_GLOBAL" to
individual components' logging options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
At the moment we print "Sending ARP packet" even if we found ARP entry
and send the packet directly.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is the first part of a large refactoring of LwM2M library
message functions and will simplify observer handling later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
All throughout the LwM2M library we use sockaddr values which are
basically the same as the net_app_ctx's remote addr. There's no
reason to keep these extra sockaddr values around. The net_app
framework client won't accept incoming requests on sockaddr other
than the one we're connected to.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This is the final stage of moving the LwM2M library internals to
the net_app APIs. This means we can support DTLS and other
built-in features in the future. All of the logic for
establishing the network connection is removed from the sample
app.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In preparation for the move to net_app APIs, we will need
to pass net_app_ctx structures around to the following
functions:
lwm2m_udp_sendto()
udp_request_handler()
Let's add the parameter as net_context for now so the
transition will be smoother later.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This allows use to associate easily the replies / pending operations
with a specific network connection.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The LwM2M library does not use net_app APIs internally. To help
this effort let's establish a user facing structure "lwm2m_ctx"
(similar to http_client_ctx and mqtt_ctx) and start it off by
wrappering the net_context structure.
Future patches will add user setup options to this structure and
eventually remove the net_context structure in favor of a net_app_ctx.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If no gateway is set, an ARP request for 0.0.0.0 will be sent out,
which is confusing, so log as an error. Of course, logging will
happen only if enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The IPv4 multicast address to MAC address mapping was missing
the 4th byte high bit clearing.
We also need to have some storage for the multicast MAC address.
This was missing which could cause NULL pointer access.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements mDNS client from RFC 6762. What this means that
caller is able to resolve "hostname.local" names using multicast DNS.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes a tx_pkts slab leak since the cloned pkt was referencing the
original pkt slab but was not originated from it (net_pkt_unref uses
pkt->slab when releasing the pkt).
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Because a next networking API call will lead to a crash. Given that
logging can be easily disabled (disabled by default so far!), don't
be shy and call by the name (i.e. error).
Jira: ZEP-2105
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the IP address string is empty, then it is no use trying
to parse it. This was seen when handling DNS server strings when
user has made a mistake and defined the DNS server addresses
incorrectly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjust length of the packet before setup_ipv4_header() which actually
might increase packet size if there is not enough space available.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Create support for registering a callback that will be called
if the device leaves or joins IPv6 multicast group.
Jira: ZEP-1673
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Commit cd35742a2 missed one unref too many on pending packet which was
triggering a crash which commit 0b8434f08 tried to fix, but it generates
a leak when there is not pending entries left in arp core. Finally,
fixing what cd35742a2 should have done: removing the extra unecessary
unref after sending the pending packet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Errors has been ignored when using TLV writer to create/write object
instance/resources. Modify to propagate the error back to the caller.
To reproduce the issue, try to create IPSO light control object
instances twice. Since the default instance count is 1, the second one
should be rejected and responded w/ error. But the current
implementation will respond w/ 2.04.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We did not check the requested object/object instance/resource exists or
not before we adding an observer. Correct it by checking the existence
first.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We should stop sending out notification to the peer when the
object/object instances requested to be observed is removed
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
We were using sys_slist_remove() to remove object, object instance and
observer w/o passing the previous sys_snode_t to it (NULL).
This will instruct the function to treat the node as the list head and
result in unexpected behavior after the removal.
Correct it by using sys_slist_find_and_remove() or passing the previous
node to the function.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
When a request demands to create a new object instance, it will search
whether the request object instance exists or not. However, current
implementation does not reset the lwm2m_engine_obj_inst at the time it
is deleted. It only removes the object instance from the sys list.
Correct the behavior by resetting both object instance and resource
instances at the time it's deleted. Also, consolidate function
lwm2m_delete_handler() and lwm2m_delete_obj_inst().
To reproduce the issue, try to create light control object instance
(/3301), delete the created instance and create it again. You shall find
following error message dumped.
> [ipso_light_control] [ERR] light_control_create: Can not create
instance - already existing: 0
> [lib/lwm2m_engine] [ERR] lwm2m_create_obj_inst: unable to create obj -
3311 instance 0
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
If the packet is put pending because ARP request need to be
done, then do not unref original packet.
Fixes#1416
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a command "net arp" to net-shell. This new command will
print ARP cache contents if IPv4 and Ethernet are enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit 725be227 ("net/mgmt/event: Commands must be > 0 so
masking them works") prevented IPv6 address setting when an
application was initialized. The check in subsys/net/lib/app/init.c
needs to be adjusted because of that change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were bunch of config options in tests/net, net-shell and
wpan_serial sample, and those options had wrong name so they
were ignored by the code.
Fixes#1428
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When new connection is accepted, the TCP context variables like
sequence number etc. were not properly set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For IPv6 check_ip_addr in subsys/net/ip/net_core.c makes a
NET_DBG call to report when a net_pkt is missing a destination
address. An analogous NET_DBG call has been added to the IPv4
destination address checking.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
prepare_arp() was unreferencing original pkt (called pending there) in
case of error.
net_prepare_arp() was always unreferencing pkt, though it could have
been already unreferenced by prepare_arp() as seen previously which is
an extra bogus unref in this case.
And in case it returned NULL, ethernet_send() would return NET_DROP
which in turn would make net_if's tx code to unref again the pkt.
This patch ensures pkt is unrefed only once and at the right place.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The TCP state string is only printed if CONFIG_NET_DEBUG_TCP is
defined. If that is not the case, then the "net conn" command
should not print the "State" column name as the state will not
be printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit 817245c564.
In certain cases the peer seems to discard the FIN packet we are
sending, which means that the TCP stream is not closed properly.
This needs more work so revert this for time being.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When new socket context is created on accepting connection to a
listening socket, its recv_q FIFO should be initialized. Without
initialization, this worked by a chance when FIFO structure was
simple, but recent change to add dlist to it (which now needs
proper initialization) exposed this issue.
Jira: ZEP-2576
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the query name is already in numeric format, there is no
need to send the query string to DNS server as we can just
convert it ourselves.
Jira: ZEP-2562
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes IP address parsing from DNS init and
replaces it by call to net_ipaddr_parse().
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_ipaddr_parse() will take a string with optional port
number and convert its information into struct sockaddr.
The format of the IP string can be:
192.0.2.1:80
192.0.2.42
[2001:db8::1]:8080
[2001:db8::2]
2001:db::42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If network context is closed, send FIN by placing it to the end
of send queue instead of sending it immediately. This way all
pending data is sent before the connection is closed.
Jira: ZEP-1853
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TLS and DTLS are not related to each other so allow DTLS to be
enabled even if TLS is disabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net app" command was accessing NULL pointer if TLS and UDP were
enabled but DTLS was not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier we modified the original pkt chain when creating IPv6
fragments. This is not a proper way as the original chain might
still be used in TCP when re-sending a message. So when fragmenting
the packet, clone it first and leave original packet intact. This
occupies litle more memory but is now safe.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is very unlikely to happen but the device will access null
pointer if we do not properly check the return value of header
check function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When trying to figure out where ICMP / TCP / UDP header is located
in net_buf, print more information about what we were doing if the
header cannot fit the first fragment. This is much needed infomation
in debugging weird issues.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using memcpy() to copy net_pkt is not safe because there are
pointers inside. So use the new net_pkt_clone() to do that.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is needed when one wants to copy the whole fragment chain
and its head pointer net_pkt.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IP header was stripped by _net_app_ssl_mux() when it received
IP packet. This is fine but if the application expects the get
the IP header, then there is a problem. Fix this by saving IP
header to ssl_context and then putting it back in front of the
packet when the data is passed to application.
Note that this IP header is not used by net_app when the packet
is sent because TLS/DTLS creates a tunnel for transferring packets
and user can only sent packets via this tunnel.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_delayed_work_cancel now only fail if it hasn't been submitted which
means it is not in use anyway so it safe to reset its data regardless
of its return.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The original commit 8ebaf29927 ("net: http: dont timeout
on HTTP requests w/o body") was intended to handle a case
where an HTTP response had been retrieved from the server but
the HTTP parser couldn't meet the criteria for calling
"on_message_complete". For example, a POST to a REST API
where the server doesn't return anything but an HTTP
status code.
It was a really bad idea to check a semaphore count. There
is a lot of kernel logic built into semaphores and how the
count is adjusted. The assumption that the value is 0
after the k_sem_give() is incorrect. It's STILL 0 if
something is pending with a k_sem_take(). By the time
k_sem_give() is done executing the other thread has now
been kicked and the count is back to 0.
This caused the original check to always pass and in turn
breakage was noticed in the http_client sample.
Let's do this the right way by setting a flag when
on_message_complete is called and if that flag is not set
by the time we reach recv_cb, let's give back the semaphore
to avoid a timeout.
Jira: ZEP-2561
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The HTTP header field pointers are saved for each HTTP request.
But the counter that saves the pointers was never reset to initial
value when the connection was dropped. This meant that the header
field values were only proper for first HTTP request.
Jira: ZEP-2463
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server needs global enable/disable status instead of only being
able to enable or disable just the TLS server part.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have specified AF_UNSPEC when initializing application
server local address, then we try to bind to both IPv4 and IPv6
addresses. The old code did not honor the port number in this
case but used some random value for port.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has specified a specific local address, then honor that
and do not try to bind IPv4 context if only IPv6 is defined,
and vice versa for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zeroing-out all bytes from a connection structure when it's
unregistered ensures all state from a previous connection is gone and
can't be mistakenly reused.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If either a remote or a local address were supplied to the
net_conn_register() function, the IP stack would proceed to copy
sizeof(struct sockaddr) bytes from the respective remote_addr
or local_addr pointers, regardless of the actual size of the storage
these pointers point to.
Use the proper size depending on the socket address family.
Coverity-ID: 173630
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If CONFIG_NET_DEBUG_APP was defined, but neither NET_APP_SERVER nor
NET_APP_CLIENT, build failed due to net_app_cb() haven't beeen
defined. So, define it to empty in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Setting just IPv4 address as was allowed before isn't enough for
real-world usage (e.g. accessing DNS and outside servers in general).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per LwM2M spec (7.3.2.4 Operation on Object):
"If the payload (New Value) conveys an Object Instance ID in conflict
with one already present in the LwM2M Client, the complete request
MUST be rejected and a "Bad Request" error code MUST be sent back."
Let's do that.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Per LwM2M specification 7.3.2.4, "Optional Resources MAY be conveyed
in the "New Value" parameter as well; the LwM2M Client MAY ignore the
optional resources it doesn't support."
Update TLV/JSON writer to ignore error when object fields are not
found (treated as optional resource). This will allow the resources
supported being written.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
[michael.scott@linaro.org: re-worked patch post addition of CREATE
operation.]
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Prior to this patch, a CREATE operation was handled as a WRITE operation
after the object instance was created. This becomes problematic when
handling of optional resources differs between these 2 operations.
Let's introduce an actual CREATE operation and use it later to create
these differences.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
We are returning EINVAL from content format write ops when an object
field definition is not found (an optional field which is not
implemented). Instead, return ENOENT which lets the LwM2M engine
know to send ZOAP_RESPONSE_CODE_NOT_FOUND to the LwM2M server at the
end of handle_request().
NOTE: This behavior is not correct when we call the writer right after
a CREATE operation where the data is assigned to resources for the
first time. This case will be handled in a follow-up patch once we're
able to distinguish between a WRITE and a CREATE in the write op
handler.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_pkt_get_reserve_data ignores the timeout parameter when in isr,
using K_NO_WAIT instead, which can lead to invalid fragment.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Per LwM2M specification 5.3.1 Register, report "ct=11543" when JSON is
supported. Also, report the resource type as rt="oma.lwm2m" when "ct="
presents.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Per LwM2M specification 5.3.1 Register. When object instances are
available, object ID can be ignored in registration message
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
According to LwM2M specification 5.2.7.3 Bootstrap DISOCVER,
security object is only reported to the bootstrap server.
Correct the behavior to (1) report server object to the server
(2) do not report security object at registration time
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
This is how it's called in the main docs, so use this same phrase in
Kconfig and samples too.
Also, added some articles to docs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This option enables full debugging output for memory allocations.
As that can produce lot of output and slow down the device under test,
it is disabled by default.
The previous CONFIG_NET_DEBUG_NET_PKT will collect information about
memory allocations but will not print any output. Use "net mem" or
"net allocs" commands in net-shell to see the memory allocation status.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because the name of the memory pool can be quite long, print
it last so that the columns get aligned nicely.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are not in ESTABLISHED state, then there is no need to
try to resend any pending data packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the expire send timer expires, then it sends the packet.
If that happens, then we must not try to send the same packet
again if we receive ACK etc. which can cause re-sends to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the packet sending is slow then we must NOT increment the ref
count when re-sending it. This is unlikely but can happen if there
are lot of debug prints etc. extra activities that prevent the driver
to actually send the packet fast enough.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that the sent flag is only set after we have really
sent the packet and the driver has verified that.
If the net_pkt_set_sent() is called while still in tcp.c, then
depending on how fast the device is, it might happen that the
retry timer expires before the packet is actually sent. This was
seen in frdm-k64f with ethernet and various debug prints activated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is a backlog entry when TCP context is released, then
cancel the ACK timer if one exists.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that a network packet is sent after calling
http_response_send_data(). Othwerwise the packets might be
piling up and not sent in timely manner.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some older C libraries do not have errno for EPFNOSUPPORT.
Fixes issues with newlib in some versions of Xtensa XCC compiler.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The initial function prototype did not have 'inline' in it,
resulting in a compiler warning with XCC.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's never a good idea to redefine functions as macros if intended
to be unused in some configuration
- "statement with no effect" warnings
- "unused argument" warnings
- No type checking done if the macros are used
These have been redefined as empty inline functions.
Fixes compiler warnings with XCC.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The second 'const' is misguided, indicating that the returns pointer
value itself cannot be changed, but since pointers are passed by value
anyway this is not useful and was generating warnings with XCC.
The leading 'const' indicates that the memory pointed to is constant,
which is all we needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Inline functions declared in header files need to be declared
static. Fixes a compiler warning with XCC compiler.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently, the HTTP_NETWORK_TIMEOUT setting is hard-coded as 20 seconds.
Not every application may want to wait that long, so let's change this
to a CONFIG option: CONFIG_HTTP_CLIENT_NETWORK_TIMEOUT
NOTE: This also removes HTTP_NETWORK_TIMEOUT from the public http.h
include file. It was not being used externally to HTTP client sources.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
A TCP FIN message is passed on to user apps as a tcp_received_callback
with a NULL pkt parameter. This means the connection is closing and
the app should do whatever cleanup it needs as there will be no further
callbacks for the current TCP connection.
Currently, if a HTTP client request doesn't receive a "body" which
the HTTP parser can use to trigger on_message_complete, then the request
will end up timing out and most apps will think an error has occurred.
Instead, let's handle the TCP FIN message and return the waiting
semaphore, leaving the app to deal with whatever has been set in the
current HTTP context response data (IE: http_status).
This fixes using HTTP client to send POST data to servers which
only respond with HTTP_OK status and no body.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
"Network Application Support" itself is renamed from "Network
Applications" and also includes net_app API.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is needed in order to get information which function is
doing the ref. With inline function this was not possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of printing [net/net_pkt], print [net/pkt] if debug log
is enabled for network packet allocator. The double net in earlier
print is redundant information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always have CONFIG_NET_IPV6_MAX_NEIGHBORS parents,
use CONFIG_NET_RPL_MAX_PARENTS when creating the parent table.
Default value for max parents is the max neighbors so no
functionality changes are introduced here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always having CONFIG_NET_IPV6_MAX_NEIGHBORS number
of items in neighbor pool, store the neighbor count in the pool
and use that value when traversing the neighbor table.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to define what kind of network the RPL should serve.
Currently options will be either ANY or IEEE802154. If there
is only one network interface in the system, then ANY will take
the default network interface and use that. If there are multiple
network interfaces, then one should not use ANY as the default
network interface might not be the expected one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print network interface where the DIO, DIS or DAO was sent. This is
useful if we have multiple network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When printing network interface specific data, print also
the type of the network interface (ethernet, bluetooth etc).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user has not specified CONFIG_NET_APP_MY_IPV4_ADDR or
CONFIG_NET_APP_MY_IPV6_ADDR, the value is set to "" in this case.
This will be converted to ANY IP address which is not useful
to be set to the network interface. So check this and just
continue the init in this case without setting the IP address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The documentation says that the API will automatically append the
net_buf fragment to the end of network packet fragment chain.
This was not the case and current only user for this API in
echo-server sample appended the fragment itself. The fix is to
automatically append the fragment to the end of fragment chain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. According to the specification 5.3.1, it's a MUST to specify
(1) content format: app link format (2) supported lwm2m version.
Also, we should use text/plain instead of LWM2M's (obsolete).
2. Use LWM2M_FORMAT_OMA_TLV as default accept format when accept option
is not given from the caller for TLV is a MUST have in LwM2M spec and
it can deals w/ multiple resources read
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Save in observe_node_data so that later on we can select the correct
content format requested by the caller at the first time
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Function do_write_op_tlv() uses in->inbuf and in->insize as a looping
condition to iterate through items in TLV payload and call
do_write_op_tlv_item() to update the value.
However, do_write_op_tlv_item() will override the value before calling
for fitting the usage of lwm2m_write_handler() function without restore
them. (lwm2m_write_handler() is also called by plain text/json writer
and is expecting in->inbuf is the start of buffer and in->insize as the
length of the buffer)
This will result in errors in do_write_op_tlv().
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
RFC-7230 "HTTP/1.1 Message Syntax and Routing" Section 5.4
describes the "Host" header formatting. If Zephyr user
specifies a host string as a part of the HTTP client request
structure, we end up sending an incorrect HTTP header due
to a missing "Host :" text.
Fix this by prepending "Host: " to the header data before
the user supplied host string.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
sprint_token is only used by SYS_LOG_DBG, so only build it when
CONFIG_SYS_LOG_LWM2M_LEVEL > 3.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Separate response can happen when handling block transfer for firmware
updates, and to avoid duplicating the lwm2m_udp_receive function, create
and additional flag to allow handling CoAP separate response messages.
This is required to avoid removing the reply callback, since a new
message (with a valid token) will be received later from the server.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Simplifly net_context_sendto calls and also allows to easily debug every
send/receive lwm2m call.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
If the device has multiple network interface, then we must not
blindly use the default one but get the IEEE 802.15.4 network
interface when setting radio parameters in the shell.
Jira: ZEP-2432
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print route information by groupping them for each network
interface like this:
IPv6 routes for interface 0xa8007140
====================================
IPv6 prefix : 2001:db8::212:4b00:0:3/128
neighbor : 0xa80065e0
link addr : 00:12:4B:00:00:00:00:03
IPv6 prefix : 2001:db8::212:4b00:0:1/128
neighbor : 0xa8006660
link addr : 00:12:4B:00:00:00:00:01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add "net rpl" command to net-shell which will return both static
RPL configuration from Kconfig, and dynamic run time configuration
of the nodes and parents.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_rpl_foreach_parent() function that will traverse
through all the parents and return their information via callback.
This is needed by net-shell in later commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If debug level was low but debugging was activated, then some
of the debug variables were left unused.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_rpl_repair_root() and net_rpl_set_root_with_version()
functions were static which prevented global repair when using
an instance id. Making those functions global allows RPL network
repairing from shell for example.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit b14586c3ca ("net: rpl: RPL route entry was fetched
too late") dropped the DAO packet too early which prevents the
RPL root node functionality. Rework the earlier commit so that
Coverity issues are fixed but the RPL DAO message is also properly
handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
IPSO Smart Objects are a set of template objects based on the LwM2M
object framework which are designed to represent standard hardware
such as temperature and humidity sensors or light controls.
Let's add a place for these objects to live as well as an initial
temperature sensor object.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Origin: SICS-IoT / Contiki OS
URL: https://github.com/sics-iot/lwm2m-contiki/tree/lwm2m-standalone-dtls
commit: d07b0bcd77ec7e8b93787669507f3d86cfbea64a
Purpose: Introduction of LwM2M client library.
Maintained-by: Zephyr
Lightweight Machine-to-Machine (LwM2M) is a protocol stack extension
of the Constrained Application Protocol (CoAP) which uses UDP
transmission packets.
This library was based on source worked on by Joakim Eriksson,
Niclas Finne and Joel Hoglund which was adopted by Contiki and then
later revamped to work as a stand-alone library.
A VERY high level summary of the changes made:
- [ALL] sources were re-formatted to Zephyr coding standards
- [engine] The engine portion was re-written due to the heavy reliance
on ER-CoAP APIs which are not compatible to the Zephyr CoAP APIs as
well as other Zephyr specific needs.
- [engine] All LWM2M/IPSO object data is now abstracted into resource
data which stores information like the data type, length, callbacks
to help with read/write. The engine modifies this data directly (or
makes callbacks) instead of all of the logic for this living in each
object's code. (This wasn't scaling well as I was implementing
changes).
- [engine] Related to the above change, I also added a generic set of
getter/setter functions that user applications can call to change
the object data instead of having to add getter/setting methods in
each object.
- [engine] The original sources shared the engine's context structure
quite extensively causing a problem with portability. I broke up the
context into it's individual parts: LWM2M path data, input data and
output data and pass only the needed data into each set of APIs.
- [content format read/writer] sources were re-organized into single
.c/h files per content formatter.
- [content format read/writer] sources were re-written where necessary
to remove the sharing of the lwm2m engine's context and instead only
requires the path and input or output data specific to it's
function.
- [LwM2M objects] re-written using the new engine's abstractions
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In the 08 Feb 2017 V1.0 LwM2M specification page 80 mentions: in
response to a "Notify" operation for which it is not interested in
any more, the LwM2M Server can send a "Reset Message".
Leshan server sends this CoAP RST response and it does not contain
the originating message token (which is also how the packet flow looks
on page 81 of the LwM2M spec). Using the current ZoAP sources, the
client has no way of matching back to observation which needs to be
cancelled.
Let's add a match for message ID of a reply where there is no token
to handle this case.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
[ricardo.salveti@linaro.org: Handle both piggybackend and separate
response (id doesn't need to match, only token).]
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
For an accepted socket, we should set our receive callback and start
to queue packets ASAP (in the accept callback itself). Otherwise,
(if done in accept() call like before) we may miss to queue some
packets.
This issue wasn't exposed with slow SLIP and with emulated QEMU, but
easily exposed with Ethernet on a real hardware.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to define __LINUX_ERRNO_EXTENSIONS__ if newlib is being
used otherwise there is a compile error about ESHUTDOWN errno
value missing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Fix typo'd "&&" when checking bit value
- Don't use NET_EVENT_IPV6_ADDR_ADD for checking mask value
due to combination of bits: _NET_EVENT_IPV6_BASE |
NET_EVENT_IPV6_CMD_ADDR_ADD
Instead use NET_EVENT_IPV6_CMD_ADDR_ADD so the check works
when NET_EVENT_IPV6_ROUTER_ADD is enabled.
Tested fix with echo_server on x86 qemu where it was previously
broken.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Unlikely to happen but make sure parent neighbor exists when
probing it.
Coverity-CID: 173635
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no parent found with a specific dag, then we have
to check this in order not to access NULL pointer.
Coverity-CID: 173637
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parent is not found when adding DAG, then just return.
We must check the parent pointer as it can be NULL.
Coverity-CID: 173638
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to complex overflow checks that are error prone.
Coverity complained that the original diff check was always
false.
Coverity-CID: 173639
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was dead code when handling IPv6 Hop-by-hop option.
The extra option value check can be removed as it is useless.
Coverity-CID: 173642
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity complains about non-checked return values here. This is false
positive as the return values do not need checking in this special
case because we are closing the socket.
Coverity-CID: 173646
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity complains about reversed src and dst fields when sending
DAO ack back to originator. This is false positive.
Coverity-CID: 173650
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check the return value of k_poll() as instructed by Coverity.
If debugging is enabled we print error if this happens, otherwise
this error is ignored. In our case the return value should always
be 0.
Coverity-CID: 173652
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is be possible that the local address was not properly
resolved in which case the local_addr variable could be NULL.
This will cause NULL pointer access if the variable is used.
Coverity-CID: 173656
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RPL route entry variable "extra" was resolved inside an
if-statement and the code was always returning from it.
This meant the the later code dealing with "extra" was never
executed. Fixed by moving the resolving of "extra" a bit
earlier so that the "extra" variable has always a proper value.
Coverity-CID: 173659
Coverity-CID: 173654
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TX send function will return status < 0 if there is an error
when sending. This status value was incorrectly checked.
Coverity-CID: 173660
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we buffer incoming packets in receive callbacks, we must decrease
receive window to avoid situation that incoming stream for one socket
uses up all buffers in the system and causes deadlock. Once user app
consumes queued data using recv() call, we increase window again.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This fixes the existing situation that "if application buffers data,
it's the problem of application". It's actually the problem of the
stack, as it doesn't allow application to control receive window,
and without this control, any buffer will overflow, peer packets
will be dropped, peer won't receive acks for them, and will employ
exponential backoff, the connection will crawl to a halt.
This patch adds net_context_tcp_recved() function which an
application must explicitly call when it *processes* data, to
advance receive window.
Jira: ZEP-1999
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This enables IPSP node role which requires IPSS GATT service to be
registered.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_REQUEST_BT_ADVERTISE which can be used to advertise
IPSS service so the remote devices can connect to it.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some network interfaces such as bluetooth 6lowpan can start without
an assigned IP address and then later once the connection is up a
router advertisement broadcast will assign the IP address.
The net_app framework will timeout out during network init if a value
cannot be parsed from CONFIG_NET_APP_MY_IPV6_ADDR. Let's adjust
the framework to handle a missing value there and fill it in later
when the IPv6 address is added to the interface.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Historically, stacks were just character buffers and could be treated
as such if the user wanted to look inside the stack data, and also
declared as an array of the desired stack size.
This is no longer the case. Certain architectures will create a memory
region much larger to account for MPU/MMU guard pages. Unfortunately,
the kernel interfaces treat both the declared stack, and the valid
stack buffer within it as the same char * data type, even though these
absolutely cannot be used interchangeably.
We introduce an opaque k_thread_stack_t which gets instantiated by
K_THREAD_STACK_DECLARE(), this is no longer treated by the compiler
as a character pointer, even though it really is.
To access the real stack buffer within, the result of
K_THREAD_STACK_BUFFER() can be used, which will return a char * type.
This should catch a bunch of programming mistakes at build time:
- Declaring a character array outside of K_THREAD_STACK_DECLARE() and
passing it to K_THREAD_CREATE
- Directly examining the stack created by K_THREAD_STACK_DECLARE()
which is not actually the memory desired and may trigger a CPU
exception
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A new net-shell command "net app" will print information about
network app users in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add API that allows net-shell to get net_app context information
that can be used to debug net_app connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_client_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For IPv6 header compressed packet, the IP header offsets will
be wrong. In this case there is no need to print error when
trying to print TCP packet information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds http_server_set_net_pkt_pool() function that allows
caller to define net_buf pool that is used when sending a TCP packet.
This is needed for those technologies like Bluetooth or 802.15.4 which
compress the IPv6 header during send.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_MQTT_LIB_TLS is introduced to enable TLS support.
Also, prj_frdm_k64f_tls.conf is added to demostrate the whole idea.
jira:ZEP-2261
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
As SLIP TAP is now the default after the commit ca0ad13a61
("net: enable SLIP only on QEMU targets"), clarify the comments
and settings in various Kconfig files that talk about slip.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change the common "init with 0" + "give" idiom to "init with 1". This
won't change the behavior or performance, but should decrease the size
ever so slightly.
This change has been performed mechanically with the following
Coccinelle script:
@@
expression SEM;
expression LIMIT;
expression TIMEOUT;
@@
- k_sem_init(SEM, 0, LIMIT);
- k_sem_give(SEM);
+ k_sem_init(SEM, 1, LIMIT);
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If the network interface is down, then IPv6 DAD (Duplicate
Address Detection) cannot be done if new IPv6 address is added
to the network interface. This can happen in Bluetooth, where
network interface is taken up only after there is a BT connection.
The DAD is delayed and done later after the network interface is up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Normally network interface is always UP, but Bluetooth
interfaces are down until connected. So if this is the case,
then check the interface status before trying to access variables
that are NULL. This was seen with "net iface" shell command when
BT was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case the application is using NET_L2_BLUETOOTH the SLIP drivr shall
not be selected as bus they cannot coexist since they use the same UART
port:
arch/x86/soc/ia32/Kconfig.defconfig:
config BLUETOOTH_UART_ON_DEV_NAME
default "UART_1"
config UART_PIPE_ON_DEV_NAME
default "UART_1"
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* Fix the indentation which was caused by uint32_t -> u8_t changes.
* Make sure there is no unused variable warning if debugging is
enabled but debug level is low.
* Add assert that checks that Imax_abs is > 0 which it should be.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there are no neighbors or there is no route to one specific
neighbor, then check the NULL pointer before accessing the route.
This issue was seen with "net route" shell command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_stack_analyze function wants to look at the stack buffer,
but it is making assumptions on where this data is that are no
longer valid. Change to use the proper APIs for referencing this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If IEEE 802.15.4 is enabled, then setup the network settings
automatically so that the device is ready for IP configuration.
This is only done if CONFIG_NET_APP_AUTO_INIT is enabled, which
is currently the default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address lifetime timer was cancelled always even if the address
timer was never installed.
Jira: ZEP-2397
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
poll() allows to (efficiently) wait for available data on sockets,
and is essential operation for working with non-blocking sockets.
This is initial, very basic implementation, effectively supporting
just POLLIN operation. (POLLOUT implementation is dummy - it's
assumed that socket is always writable, as there's currently no
reasonable way to test that.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use net_context_put(), not net_context_unref(). This makes sure
that after sending response, connections are properly closed.
Jira: ZEP-2362
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Introduce net_context_bind_default() to ensure that local address is
set for context if not yet (via explict bind() call). This fixes
dereferences of NULL pointer to local address which was exposed when
MMU was enabled for qemu_x86.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
According to RFC7959 page 30, "The end of a block-wise transfer is
governed by the M bits in the Block options, _not_ by exhausting the
size estimates exchanges."
Therefore, we should check the M bit instead of total size (which
is not always available, too)
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
If either UDP or TCP is enabled but not both, then connectivity
fails. This was a side effect of commit 3604c391e ("net: udp:
Remove NET_UDP_HDR() macro and direct access to net_buf")
Jira: ZEP-2380
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When IPv6 fragments were sent, the last IPv6 fragmented packet
was accessing NULL pointer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When the ARP message is received when the device is starting up,
the network interface might not yet have IPv4 address setup
correctly. In this case, the IP address pointer could be NULL
and we must not use it for anything.
Fixes#752
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Coverity reported false positives, add comment about these in
the code.
Jira: ZEP-2344
Jira: ZEP-2345
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes a regression which the original patch introducing
this code (improving concurrent connection handling) had on
*sequential* connection handling. Without this patch, with the
default CONFIG_NET_TCP_BACKLOG_SIZE of 1, after each connection
request, there was 1s (ACK timeout) "dead time" during which new
connection wasn't ptocessed.
This is because k_delayed_work_remaining_get() was checked the
wrong way. But there's no need to use k_delayed_work_remaining_get()
at all, instead just call k_delayed_work_cancel() and dispatch on
its return code.
Note that there's still a problem of synchronizing access to
the global array tcp_backlog, as worker (which modifies it) may
preempt packet handling code (which also modifies it).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The sequence number validator was checking the seq numbers
incorrectly. This caused some valid RST packets to be dropped
and the TCP stream to hang.
Added also a TCP test case that tests the seq validator.
Jira: ZEP-2289
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Usually it is not enough to have just one IPv6 multicast
address defined for the network interface. So allocate three
IPv6 multicast addresses for the network interface as IPv6
by default uses multicast a lot. This hopefully will avoid
some mysterious errors if the addresses run out.
Note that this will increase memory usage a bit so you might
need to lower the count in your conf file if memory is low.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit 210c30805b ("net: context: Close connection fast
if TIME_WAIT support is off") was not a proper way of closing
the connection. So if Zephyr closes the connection (active close),
then send FIN and install a timer that makes sure that if the peer
FIN + ACK is lost, we close the connection properly after a timeout.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit 00ac0487b0 ("net: context: Remove tcp struct SYN-ACK
timer handling") removed also the passive close ACK timer.
Adding that ACK timer back so that we can close the connection
properly even if the last ACK from peer is lost.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This fixes coverity CID 171565 which may be valid in case of the
connection is not properly setup, or its memory is corrupted, it
may cause use of invalid addresses to be set using
net_if_set_link_addr.
JIRA: ZEP-2344
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the TCP data packet needs to be re-sent after the packet is lost,
then the acknowledgment number will be changed. This then means that
the TCP checksum needs to be recalculated too.
Signed-off-by: june li <junelizh@foxmail.com>
When a node receives consistent DIO messages with same data from
Border Router just ignore those messages. Need not to proceed
further.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Link metric is part IPv6 neighbour data struct. But RPL code is
trying to access it from RPL parent table where link metric doesn't
exist. So provided an api to get IPv6 neighbour data from RPL parent
data.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DAG rank will be properly written with net_pkt_write_be16() in
network packet. API will take care of endianness. So need
not to convert it using htons().
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Sender rank (16 bit uint) was properly read with net_frag_read_be16()
api and need not to convert it again using ntohs().
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We had various asserts when checking network packet length but
printed also error when there was none. Fix this by checking
do we really have a too short message.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_TCP_HDR() macro as we cannot safely access TCP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the TCP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove NET_ICMP_HDR() macro as we cannot safely access ICMP header
via it if the network packet header spans over multiple net_buf
fragments.
Jira: ZEP-2306
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 HBH option PAD1 ext header was not parsed properly
as the code read one extra byte from the ext header. The
PAD1 length is only 1 byte.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function that helps to figure out if the
protocol headers can be directly accessed when they fit one
net_buf fragment, or if they need to accessed using various
net_pkt helpers that know about reading data from two
different net_buf's.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of directly setting pointer to where to start to calculate
the various IP related checksums, use the net_frag_skip() to first
find out what is the fragment where the calculation should start.
This needs to be like this so that if the IP header + possible
extension are so long that they do not fit the first fragment,
we need to be prepared to look into second fragment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context_unref() is protocol agnostic, after being un-referenced,
the same context might end up being used then for UDP,
if context->tcp is not reset to NULL, calling net_context_unref()
after this UDP usage will again try to release this TCP pointer
which might lead to random error.
Signed-off-by: june li <junelizh@foxmail.com>
In some cases the lladdr might not be set, currently this is
seen with RPL unit tests, in which case we must not access
the lladdr.
Jira: ZEP-2330
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no route to the neighbor, then do not try to delete
it because the route pointer is NULL.
Jira: ZEP-2329
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SYN-ACK timer is now handled by the TCP backlog functionality,
while the remaining ACKs for established connections use the tcp
struct ack timer. With this, code setting tcp struct SYN-ACK state
timers can now be removed.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add timer for sent TCP SYN-ACKs. If the timer is already
scheduled to run before canceling it is attempted, set
the cancelled flag and let the callback remove the
delayed work.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add an array of configurable size that holds TCP backlog entries.
The array is shared between all incoming TCP connections in order
to make it possible to get away with less memory consumed than
with a connection based approach.
The backlog entries are created when a SYN is received for a
listening TCP socket and removed once the corresponding ACK is
seen. With an incoming RST the corresponding backlog entry is
cleared, if any.
The size of the global backlog array is defined with the
CONFIG_NET_TCP_BACKLOG_SIZE Kconfig variable.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
When neither IPv4 nor IPv6 are selected the limit that is
passed to k_sem_init will end up being 0, which will trigger
the folowing assertion in k_sem_init;
__ASSERT(limit != 0, "limit cannot be zero");
Fixed by not passing count as initial and limit value but
only as initial value and use UINT_MAX as limit.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ICMP packets do not fit in 1 net_pkt fragment the checksum
will be calculated incorrectly.
The problem shows up when using ping with the -s option to
create large ping requests. Eventhough the ping command does
accept the reply without complaining, Wireshark warns that
the icmp checksum is incorrect.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
If a socket is closed without reading all data from peer or accepting
all pending connection, they will be leaked. So, flush queues
explicitly.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
With CONFIG_NET_SOCKETS_POSIX_NAMES=y, "raw" POSIX names like
socket(), recv(), close() will be exposed (using macro defines).
The close() is the biggest culprit here, because in POSIX it
applies to any file descriptor, but in this implementation -
only to sockets.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This adds Kconfig and build infrastructure and implements
zsock_socket() and zsock_close() functions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The global mbedtls heap is set automatically now so no need to
set it individually in the http library.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Three response codes are missed in zoap_header_get_code() which will
result in the response code returned from the function being set as
ZOAP_CODE_EMPTY. Check include/net/zoap.h for the missing code
definition.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
In LISTEN state ignore a TCP RST. In SYN RCVD state, reset TCP
connection state to LISTEN when a valid RST segment is received. In all
other states close the connection - except that these other states will
not be handled in tcp_syn_rcvd() function.
Jira: ZEP-2279
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
If the CONFIG_NET_TCP_TIME_WAIT support is disabled, then do not
start to wait for reply to sent FIN in active close, but unref
the corresponding net_context in order to close the connection
as soon as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The net_pkt_split() was incorrectly checking fragA pointer
even before it was allocated.
The unit test is fixed and converted to ztest.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From
http://pubs.opengroup.org/onlinepubs/7908799/xns/netinetin.h.html:
in_addr_t
An unsigned integral type of exactly 32 bits.
[] the in_addr structure [] includes at least the following member:
in_addr_t s_addr
In other words, POSIX requires s_addr to be a single integer value,
whereas Zephyr defines it as an array, and then access as s_addr[0]
everywhere. Fix that by following POSIX definition, which helps to
port existing apps to Zephyr.
Jira: ZEP-2264
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If we receive a HTTP request and if the earlier context is still
active and it is not the same as the new one, then close the earlier
one. Otherwise it is possible that the old context will be left into
TCP ESTABLISHED state and would never be released. Example of this
is that we had IPv4 connection active and then IPv6 connection is
established, in this case we will disconnect the IPv4 connection
after this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Given that K_NO_WAIT is passed as a timeout to net_context_recv(), it's
unlikely this function will return any error value. It's cheap to
check, though, so do it.
Coverity-CID: 170580
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The shell takes care of removing the module name so it is no longer
necessary to have this adjustment.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain TCP states we should not try to send RESET segment
to peer. So check this and do not try to use NULL pkt to send
a message.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net http monitor" command turns on HTTP monitoring,
which means that for each incoming HTTP or HTTPS request,
a information about source and destination address, and
the HTTP request URL is printed.
User can disable the monitoring by "net http" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_DEBUG_HTTP_CONN is enabled, then start to collect
currently active HTTP connections to HTTP server.
This is only useful for debugging the HTTP connections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot send network data, then print the error code when
printing debug information about the issue. This is needed when
debugging the issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add HTTPS support into http-client library. The init of the
HTTPS client connection is different compared to HTTP client,
but the actual HTTP request sending is using the same API as
HTTP client.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is done so that both http_client and http_server functionality
can share the same heap.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When src and dst addresses are compressed based on context
information, uncompression method should verify CID bit,
SAC and DAC bits and context ID's. But it has missed some
cases which resulted in invalid uncompressed IPv6 header.
e.g. CID is set, SAC is 0 and DAC is 1 and context id's provided.
Uncompression method assumed that src address is compressed based
on context information but it is not.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Empty RPL HBH header will be inserted while finalizing IPv6 packet
but updated after finding nexthop and sent the packet. In case of
Bluetooth or multicast dst address it was missed. Resulted in
empty RPL HBH header and packet dropped at peer node. It should
be updated in all circumstances.
Jira: ZEP-2088
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The mbedtls debugging function was set before the ssl config
struct was initialized. This meant that it was not possible
to activate mbedtls debug prints. This commit sets the debug
print option after the config struct has been initialized.
Fixed also the debug prints which print extra \n which looks
very bad in debugging outputs.
This commit does not enable mbedtls debugging, it just makes it
possible to output mbedtls debug prints. In order to get mbedlts
debug prints one needs to do this:
* set DEBUG_THRESHOLD to >0 in http_server.c
* enable CONFIG_NET_DEBUG_HTTP in project config file
* enable MBEDTLS_DEBUG_C in mbedtls config file (see file pointed
by CONFIG_MBEDTLS_CFG_FILE option)
* in qemu, one needs to increase the size of the available RAM,
this setting does the trick, CONFIG_RAM_SIZE=300
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Semantics of ENOENT error as used previously is "named entity not
found", whereas for "I/O handle is not valid", there's EBADF. For
example, POSIX/SUSV2 doesn't even list ENOENT as a possible error
for accept(), connect(), recv(), etc. whereas it lists EBADF, e.g.:
http://pubs.opengroup.org/onlinepubs/7908799/xns/connect.html
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of waiting forever for a free net_buf, set a timeout to
the allocations (500 ms). This way the application will not be
blocked by memory exhaustion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some cases the net_pkt can be null when freeing it,
this will print error from net_pkt library. Avoid this by
checking the value of net_pkt before calling net_pkt_unref().
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we re-connect to same peer server, then we should select a new
source port. Noticed that if the same source port as before is
used for the new connection, the peer might drop the packet. This
was seen when connecting to Linux peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Defines a new tunable, CONFIG_NET_TCP_RETRY_COUNT, that determines the
number of segment retransmissions that the IP stack will attempt to
perform before resetting the connection.
The default value is 9 retransmissions, which amounts to 1:42 minutes,
as close as possible to the minimum recommended by RFC1122.
Jira: ZEP-1956, ZEP-1957
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If we receive unknown option in neighbor advertisement message,
then skip those properly. Old code did not check the length of
the extension options which could cause infinite loop.
Jira: ZEP-2219
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
If we received a bad HTTP request, then subsequent good requests
were also returning 400 error code. The parsing state needs to
be initialized after each received HTTP request.
Jira: ZEP-2181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fixes the following issue:
"In expression 1UL << chan - 1U, left shifting by more than 31
bits has undefined behavior. The shift amount, chan - 1U, is
4294967295."
Coverity-CID: 167140
Jira: ZEP-2131
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Print also network buffers that are allocated by the IPv6
fragment handler. This is very useful in debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user really wants, it is possible to increase the
maximum size of the fragmented packet. According to RFC 2460
chapter 5, we do not need to accept larger than 1500 byte IPv6
packets, so the max pkt limit is set to 2. But if really needed
the limit can be raised by defining NET_IPV6_FRAGMENTS_MAX_PKT
to some new value. Currently there is no Kconfig option for
doing this as it is unlikely that this is needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The cancellation of reassembly did not work as expected because
K_WORK_INITIALIZER() did not setup the timeout function properly.
So do the timer initialization at runtime instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 fragmentation was not working properly when the large
IPv6 packet was being sent. There is unit tests in next commit
that will test the IPv6 fragmentation sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the fragmented IPv6 packet was very large, we could run out
of resources. When that happened, we leaked the memory for the
pending fragments that were waiting reassembly.
Jira: ZEP-2166
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The previous default 60 seconds is way too long for our limited
amount of memory. It might be that the 5 sec is still too long
but that can be changed in the future.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shell itself already have a help command, so instead of creating a net
specific help just fill the help description of each command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shell modules are registered at link time thus it makes no sense to
leave it behind net_shell_init.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the HTTPS connection is closed, then properly handle call to
HTTP parser init in case of error and also remove any pending
data that belong to old connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive unknown option in neighbor solicitation message,
then skip those properly. Old code did not check the length of
the extension options which could cause infinite loop.
Jira: ZEP-2174
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we could not split the packet properly, make sure that the
fragments that we managed to allocate are unreffed and marked
as NULL.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print also the character when hexdumping a memory area.
This is useful so that one does not need to convert hex
values to characters in head. Unprintable chars are printed
as '.'
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to check attr and path variables for null as they
cannot be null.
Coverity-CID: 157595
Coverity-CID: 157602
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow the caller to delay the closing of the HTTP connection
for a number of milliseconds. The purpose for this is that
the client can send still some data back to us for a short
period of time.
This is needed for example for Basic authentication so that
server is able to receive authentication values back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address family of the UDP port listener was not set. This
caused weird debug prints in net-shell. Now the listener will
be registering IPv4 any address as it should.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection handler was registered, the checker function
introduced in commit 43b37cef ("Check duplicate UDP/TCP connection
handlers") did not check the address family (IPv4 or IPv6) of
the local end point properly. This caused duplicate connection
error to be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The uncompressed source address in packets was not handled properly if
NET_6LO_CONTEXT was enabled.
This implementation is identical to the contextless case.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
If we do not receive last ACK when the connection is tore down,
then do not wait forever as that would eat all the resources in
the network stack. So when we enter the LAST_ACK state, we setup
a timer that will unref the connection if the last ACK is not
received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without change to add ACK to FIN, invalid TCP packet is generated,
where ack sequence number is non-zero. Without adjusting sequence
number as done, ACK which we send in response to peer's FIN/ACK is
not recognized by peer, and peer keeps retransmitting its FIN/ACK.
Jira: ZEP-2104
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When connection handler was unregistered, we did not remove
it from cache. This caused invalid connection to be passed to
net_context after connection unregister if connection caching
was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We did not check UDP or TCP checksum to be valid after receiving
the packet. Fix this so that the checksum is validated when
packet is received in connection handler. As the checksum validation
can be resource intensive, do it after we have verified that
there is a connection handler for this connection.
The checksum calculation can be turned OFF if needed, but it is
ON by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit "net: tcp: Handle retransmitted packets from peer"
introduced over 80 character line that was missed in review.
Fixing it now.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled RPL and STATISTICS, then enable RPL
statistics by default as that is probably what user want.
Same thing for MLD statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we receive a packet with the sequence we already seen (and
processed), the most likely cause of it is that our ACK was lost,
and peer has to retransmit that packet. Then, we should just ACK
it, because otherwise peer will retransmit it again and again,
falling into exponential backoff and hosing the entire TCP
connection.
This makes changes to send_ack(), adding a flag to force sending
an ACK regardless of its cached status, and remove inline modifier,
as the function is big and called from many places.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We must check if we receive RST in any of the TCP states.
If we do not do this, then the net_context might leak as it
would never be released in some of the states. Receiving RST
in any TCP state is not described in TCP state diagram but is
described in RFC 793 which says in chapter "Reset Processing"
that system "...aborts the connection and advises the user and
goes to the CLOSED state."
We need to also validate the received RST and accept only those
TCP reset packets that contain valid sequence number.
The validate_state_transitions() function is also changed to
accept CLOSED state transition from various other states.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_if_get_default() was documented as returning "Default interface
or NULL if no interfaces are configured.", but actually didn't
return NULL in the latter case. Instead, it effectively returned
a pointer to random area of memory, shared with other system
structures, so calling functions like net_if_ipv4_set_netmask(),
etc. could trash unrelated memory.
Jira: ZEP-2105
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
RFC793, "Transmission Control Protocol", defines sequence numbers
just as 32-bit numbers without a sign. It doesn't specify any adhoc
rules for comparing them, so standard modular arithmetic should be
used.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit creates a HTTP server library. So instead of creating
a complex HTTP server application for serving HTTP requests, the
developer can use the HTTP server API to create HTTP server
insteances. This commit also adds support for creating HTTPS servers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a new UDP or TCP connection handler is to be registered,
we need to check if identical handler has already been created.
If a duplicate is found, the registering call will return -EALREADY.
The earlier code did not check this but allowed two identical
handlers to be created. The latter handler was never called in
this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This helper copies desired amount of data from network packet
buffer info a user provided linear buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we send TCP data segment, we need to set the length
of the application data by calling net_pkt_set_appdatalen().
This is done so that sequence number can be properly
advanced when we receive ACK to that pending packet.
Signed-off-by: xiaorui hu <xiaorui.hu@linaro.org>
fix misspelling in Kconfig files that would show up in configuration
documentation and screens.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Instead of separate sample application that does everything
related to HTTP client connectivity, create a HTTP client library
that hides nasty details that are related to sending HTTP methods.
After this the sample HTTP client application is very simple and
only shows how to use the client HTTP API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When adding link-local address to the cache the type needs to be
properly set as net_ipv6_addr_create_iid will attempt to use it
when generating the IPv6 address.
Jira: ZEP-2077
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is related to commit "net: tcp: Make sure ACK timer is not
run if cancelled" which did not set the cancel flag when the timer
was cancelled from tcp.c.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
And print a warning if that happens.
This will also avoid to raise an ASSERT on net_if_tx_thread()'s k_poll
as this one will be called with no events to work with.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of returning EIO let's bubble the error from net_context_send
back up to the caller in the following functions:
mqtt_tx_connect()
mqtt_tx_disconnect()
mqtt_tx_pub_msgs()
mqtt_tx_publish()
mqtt_tx_pingreq()
mqtt_tx_subscribe()
mqtt_tx_unsubscribe()
Change-Id: I9bb4396b227b8902ac1195a97bc37eb1959b643e
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With CONFIG_NET_DEBUG_NET_PKT enabled, the log messages are full of
errors regarding NULL parameters passed into net_pkt_unref in almost
every TX function for handling MQTT messages:
mqtt_tx_connect()
mqtt_tx_disconnect()
mqtt_tx_pub_msgs()
mqtt_tx_publish()
mqtt_tx_pingreq()
mqtt_tx_subscribe()
mqtt_tx_unsubscribe()
mqtt_parser()
Let's clean up the unref handling so that our debug log isn't quite
so full of error spam (as opposed to the normal amount of spam from
the net buf log).
Change-Id: Ib49d1192f51abe4329e6dc9da3c51a4a36290082
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The data->len of an inbound netbuf can be larger than a single
MQTT packet. For instance when a PINGRESP is also included
in the same netbuf. For this reason we should not be using
the data->len to determine how large the rest of the MQTT data is.
Specific Example: we've seen in testing that PINGRESP packets
can be included with a SUBACK packet in the same netbuf. Under
this case the current code uses the data->len incorrectly and
tries to find 3 QoS elements for the SUBACK packet when there
is only 1 (the rest of the data is for PINGRESP).
NOTE: A larger patch to iterate through the netbuf data parsing
individual MQTT packets will be needed to fix the MQTT subsys.
This patch only corrects the SUBACK parsing.
Change-Id: I7f6cebaaed9570b778d466de84331cf8c5060755
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Currently, app type MQTT_APP_PUBLISHER_SUBSCRIBER is not supported.
mqtt_init() will return EINVAL because the context rcv function is
either mqtt_publisher_parser or mqtt_subscriber_parser (not both).
Let's combine these functions into mqtt_parser and remove the app
type check from mqtt_init().
Change-Id: I60460e011395864706e293c997e9f8a65681b368
Signed-off-by: Michael Scott <michael.scott@linaro.org>
We need to set the mqtt context recv function prior to calling
net_context_recv which installs the mqtt_recv callback.
If not, we risk a race condition where an unprotected reference
to mqtt->rcv(mqtt, buf) is made in mqtt_recv().
Change-Id: If90ee58f4ea6f7879ef7c12b969ba27647426acc
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Some applications may want to reuse implementations of these
commands for debugging/diagnostics purpose even if they don't
use net shell per se, or implement an alternative shell.
Jira: ZEP-2064
Change-Id: I48cb66ccc41bd41a75a4eb8eb3c366316ec5a096
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_if_ipv6_router_add() will return router pointer on success.
This information must be cached in RPL instance, otherwise RPL
instance doesn't know about default route.
Change-Id: Ic6d80ebfa95c9a64df9adf2621ae2631d9bdb990
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When router or default router timer expired, interface will remove
router from the list. In this case RPL does not know about this.
When RPL node receives DIO messages it only verifies whether parent
exists or not. This extra checks will verify whether router really
in "used" state or not.
Jira: ZEP-2080
Change-Id: I4b36b3a2d495e76a38caddd058451daff08fab0c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_if_ipv6_router_rm() is the correct API to remove IPv6 router
from the interface as it also cancels the timer and raises a mgmt
event. The net_if_router_rm() only sets router as unused and
nothing else.
Change-Id: I55114288c9ae748520b67b206edcd4f5e420b1af
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the ./well-known/core response is bigger than L2 MTU then
response will be sent in multiple fragments. In mesh kind of networks
getting response from farthest node might loose packets. So better to
send response in a block wise fashion. Block size is configurable.
Change-Id: Id421c66597fe448c12a7215f04f63f4a284c14ab
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Value 0xFF represents End Of Options marker in CoAP message.
Use #define than magic numbers in code.
Change-Id: I3bef21ea827987f7c2e670447ee20574cb6288ae
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add timeout for packet and buffer requests. If there are no
buffers available gracefully drop the request.
Change-Id: I56fe2b606556149c83751aadc1c5eee7828a84a8
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Bluetooth only cares about the actual payload so net_pkt can be unref
as soon as the data fragments are detached.
Jira: ZEP-2070
Change-Id: Id528d5440f42903378883f5e696b3f663bbfa313
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of just plain assert, check that the packet we receive
is ok before passing it to processing function.
Jira: ZEP-2057
Change-Id: I5754c82d16e1522d8fcee561eea280eadeec31ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP trace values were not printed because of incorrect
config option used. Print also seq and ack values in decimal
in order to make it easier to correlate the values in other
prints in tcp.c.
Change-Id: I44d1535a84dcba8c6c937d348516ba801193ca23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use ready-made utility function which can take care of endianness
Change-Id: I1edd0b2ce1a086dd637e97308145f9b434e48a1f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When connect to diffrent router with the same gateway ip address,
need to clear arp cache when disable interface,
or it will use the wrong gateway mac address.
Call net_arp_clear_cache function replace to set arp_table 0.
Change-Id: Ib403a0c0030832ba48824db4d2d3fcb8add63d16
Signed-off-by: june li <junelizh@foxmail.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There was compiler error if CONFIG_NET_DEBUG_CONN was set.
Change-Id: Ibb6721c55dd2c56cd0097359a53563c6221859ea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to set the connect_cb for the context before sending SYN packet.
This is required if we have a loopback connection in which case everything
is happening more or less synchronously and the connect_cb would not be
called in this case because its value would still be null.
For remote network connections this patch makes no difference.
Change-Id: Id7f837cd9e81cd79c4666c98cae84f6cb1a77af0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must not let ACK timer to run if we have already cancelled it.
So keep track that the timer is cancelled and refuse to run it
if it was indeed cancelled. The reason why the timer might be run
in this case is because the timer might be scheduled to be triggered
after which one cannot cancel it.
Change-Id: I1c8b8cee72bc7a644e02db154d9d009b8d98ade2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local port was set to 0 for IPv6 when registering
the connection handler. For IPv4, the code was not setting
the port in local_addr struct.
Change-Id: I82f0c08641a94d75d255ac306eca7bec6c332fba
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without this info it is a bit difficult to notice what is going
on in loopback case.
Change-Id: I8f61330c01d025e41f00d663bd26947b8cafb5c0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support to print connection handler information in net-shell.
There exists one connection handler for each UDP/TCP port that we
are listening. These prints are only available if CONFIG_NET_DEBUG_CONN
is enabled because the net_context has the same information. Thus the
connection handler info is only printed if debugging is active in order
to verify that handler information is proper.
Change-Id: I0be39a5adb89b2cdbd85524c5d943e4a562b0fde
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP debugging is enabled but if the loglevel is set to lower
than 4, then compiler prints warning about unused flags variable
in net_tcp_trace().
Change-Id: I2e663644b50fe97b75088202e21b286aa010953e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Only 2 attributes lacked this prefix, which makes sense to have, so
applying it accordingly and changing the helpers as well.
Change-Id: I095b2729f977f8fb1624eff8801a4a4e21416693
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 next headers are processed in a way so it is not required to store
which header has been already seen in the net_pkt, as the processing loop
can store internally which one it has seen already.
Change-Id: I266ba8a3a0081a162318cdafb474a0fc44a3185e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is actually useless as there is only 1 RX memory slab, and thus can
be removed to reduce net_pkt structure size.
Change-Id: I62d716515120e7356ee1e2d75bbe1ec32e22c35d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix warning using incorrect format specifier
Change-Id: Ib6800c40b2cd769612ae6f107e41a941926d8e66
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We need to check whether buf_sent was true when resending the TCP
segment, and do a buf ref if needed. If this is not done, the buf
will be unref after send, which will cause unpredictable results.
Change-Id: Ibd4490305de88ac6ffd04ec42bba196e57da5c10
Signed-off-by: june li <junelizh@foxmail.com>
While very unlikely it might happen that fragment pointer is NULL
when going through fragment list.
Coverity-CID: 167148
Change-Id: Ic3dbed7ee29c7b864d4830d726f65d7f62dcea84
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If error occurs while preparing response to .well-known/core request,
do not send partly filled payload by simply changing code part only.
It's better to unref the partly filled reponse and prepare a new error
response and send.
Change-Id: I28013a4e331cfc6f01de873e80af48f765e49494
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Commit "net: zoap: Fix memory overflow issue" fixed and implemented
./well-known/core response in a different way, so this api is not needed
anymore.
Change-Id: I8f945fb5842028be50ecfdef95cbe5da3189a538
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If CoAP .well-known/core services list is bigger than single fragment
then current helper functions overwrites beyond fragment space. Which
corrupted whole stack. Right now sending response in multiple fragments
but preferred way is send response in block by block. This should
overcome packet loss across mesh scenarios. Recommended feature will
be supported with later patches.
Change-Id: I30ca55bde2516d80b3583731241ad295799c6614
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Most of the zoap utilities deal with first fragment of buffer chain.
So accessing of buf->frags directly make less usage of stack than
delcaring another variable for frag and its data. Due to code
refactoring couple of lines removed and in between those lines
coverity complained two issues, which is not valid now.
Coverity-CID: 157597
Coverity-CID: 157598
Change-Id: I3035c0625a131d49a4f0250ff0052875d3382544
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_ipv6_finalize_raw() inserts RPL(HBH) header after IPv6 header,
it updates IPv6 next header as HBH and HBH next header as original IPv6
next header.
Then net_ipv6_prepare_for_send() will update RPL HBH header if it exists.
But net_rpl_update_header() is comparing HBH option and IPv6 next header,
which is wrong. Wrong comparion does not update RPL instance id and
sender rank. Peer nodes drops all the packets due to invalid instance
ID and sender rank.
Change-Id: I91c1870a09c60f8e1ebc73e434dcc208caf6299a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Following flow does not work:
net_context_get
net_context_bind
..
..
net_context_put
net_context_get
net_context_bind
At instance of call to net_context_bind, conn_handler
is not NULL and returns with EISCONN.
This patch sets conn_handler to NULL in net_context_unref
Change-Id: I56a50839101b22161644b3cd7c5f510fa1abae3e
Signed-off-by: Mitul Shah <mitul.a.shah@intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds net_buf_reset which can be used to reset the state of a buffer.
Change-Id: I4b7c89dfd1a23a2ec8dfa3c99d5b02b9bcbceef3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I3efff6f5fa26f87d1e658d6336fef01ce45f5bb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Use UNALIGNED_GET and UNALIGNED_PUT throughout the networking stack to
access fields from the IP address structure. These structures can be
mapped directly to buffers and the macros are required for correct
unaligned memory access.
Jira: ZEP-2012
Change-Id: I55f9da7b143a22fa869d5d215c661de988cd9b91
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
This can be useful to override the default value, for testing.
Change-Id: I23b559152c71955ff5aa6fd3643f1f40f5594194
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This permits to tweak the TX power in dbm.
Change-Id: Idadff397941a39010ce3c374d9ca74b777934626
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This does not save any space but sets the fields in the
structs in more natural order. Move IPv6 related
fields in net_if into internal ipv6 struct so that all
IPv6 fields are located inside one struct. Same thing
is done for IPv4 fields which are now located inside
IPv4 internal struct in net_if.
There is no functionality changes by this commit.
Change-Id: I7d72ec0a28e2b88c79a4c294655d5ef6da6ccb25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So manipulating it requires to be ready to swap it if the CPU is BE.
Change-Id: I8d657c31cecfc9f3fcd010efbb6d090bf021f5f5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DNS resolving is better done with DNS resolve API so remove
the DNS client API which is quite hard to use.
Change-Id: Ide4973a5be674414ea6e04a35c938195cce40b6a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need a way to know when IPv6 address is successfully set
into network interface.
If IPv6 DAD (Duplicate Address Detection) succeeds or fails,
we send a management event for that. This can be used by
other components to detect when the network interface is in
usable state.
Change-Id: Ifb22415fe21f31f5dba4f55455d6e0f89b414d32
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the IPv6 utility functions were missing const in
one of the parameters that are not modified by the corresponding
function.
Change-Id: Ic9fe53daac288570c14423fd9410dcf15d1c5cfa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes net_ipv6_nbr_add able to update entries so it can be reused
when receiving RA or NS requests, so it now performs a lookup before
creating a new entry (using nbr_new to reuse more code) and in case it
finds a match attempts to update the lladdr.
Change-Id: I305a67a955e037cbbb862fef947a5fcfe131507c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net_ipv6_nbr_add shall init the delayed work as nbr_new does, so this
unifies both codes into nbr_init which does take care of initializing
the fields properly.
Change-Id: I91746276d346a3dc3c36be20d49bcf1968245fc5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Route lifetime was printed using wrong modifier.
Change-Id: Ib503d50b5817491984d51bbdaadf7457fdde178b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure the RPL is compiled ok if CONFIG_NET_RPL_MRHOF is
enabled in the configuration.
Change-Id: I51fc0e20f854164c7e0374fa6a1ebf1d4e4dbc5b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If multicast routing is set meaning that MOP3 (Mode of Operation)
is enabled, then the code was not compiling properly.
Change-Id: Ice8a9f7b705c781536d3c2c5ca6cc2bb77a7acc1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about configured DNS servers when starting
in order to ease the debugging.
Change-Id: I3ba71e514e463db790b82913e4c66a67160366dc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to set the resolved IP address family and length
before calling the user callback so that callback does not
need to figure out these values itself.
Change-Id: I724909fc1707608ab8728231a0311795b6a313f3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default hop limit is defined in struct net_if. It is possible
that user might want to tweak it for each network packet. For this
purpose, a net_nbuf_set_ipv6_hop_limit(buf) function is created.
Change-Id: I7568330358f80f0f5007d6d3c411c120b043c04f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Kconfig.rpl file was missing option to actually collect
RPL statistics. Unified the config option name to be
CONFIG_NET_STATISTICS_RPL as there was two conflicting settings
in the code and both of them were missing from Kconfig file.
Change-Id: I4ce4fcbaa317b36cac315ea3b3f710fa7a344b25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The probing_timer is only available if CONFIG_NET_RPL_PROBING
is defined.
Change-Id: I2835d17e6c3d616f815f8beefd87d2571a5ad94c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After failing to send the buf we need to release it.
This is not done for Bluetooth or IEEE 802.15.4 links which
create a copy of the sent buf and the failure case is already
checked by net_tcp_send_buf().
Change-Id: Ia556376b58ad74f68accb64eb2221a78d59dc2ec
Signed-off-by: june li <junelizh@foxmail.com>
In case CONFIG_NET_BUF_POOL_USAGE is defined use print pool->name
instead of the pointer.
Change-Id: I0be5fd8283a887145e61bdad02f721265453ce20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use UNALIGNED_GET in net_addr_ntop as the uint16_t pointer used in this
function can point to an unalined address.
Jira: ZEP-2012
Change-Id: Idfbfa8da4c8d4e10299c4ae4d6431b10466cc988
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
If the IPv6 fragmentation support is enabled, then print current
status of the IPv6 packet reassembly in "net conn" command.
Change-Id: I384e35928b67dd39ac720c77683b1767e2a1ce88
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Figure out what is the last extension header in IPv6 packet
and return offset to it. This is needed by IPv6 fragmentation
when fragmentation header is added to the packet.
Change-Id: I925ab806a5de076a425ff354711730d4f4b3c52f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds support for IPv6 packet fragmentation when
receiving (IPv6 reassembly) and when sending larger than 1280 bytes
long IPv6 packet. See RFC 2460 chapter 4.5 for more details.
Jira: ZEP-1718
Change-Id: Ia31c147cce4d456ee48f39276cca99aa09ce81d6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_nbuf_split() function that can be used to split
an existing net_buf fragment into two arbitrary length pieces,
and return the two new fragments to the caller. The data from
the original fragment is copied into these two new fragments.
Existing fragment is not modified.
Change-Id: I463e675232c6e19c2a42929f480893a6d1265873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not try to cancel query if the DNS query index is < 0.
Coverity-CID: 166770
Change-Id: I03c1f274453640d0ff80694628b8e8f18e8de900
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use UNALIGNED_PUT() to store the MSS value into network packet
because the memory location cannot be guaranteed to be properly
aligned.
Change-Id: I77fd7a70ef45eedb657cac29457b0239b0a1d4c2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This helps debugging as printable string of the ICMPv6 type is
printed when packet is received if debugging is active.
Change-Id: I22b84bb6b28db7fba030699af3e561a0775b53d2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It requires a net_nbuf, so the actual buf, and not a frag here.
Change-Id: I4fd888c9a91f5e3f3dd664ae5e3bf93f90a2f597
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will refactor net_core.c and move IPv4 specific code
into ipv4.c which is a more logical place for it.
Change-Id: Ia60c5bfec488d2d1a664f113dc3df88e7d5badd1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will refactor net_core.c and move IPv6 specific code
into ipv6.c which is a more logical place for it.
Change-Id: I5bbecbb760111326b9a6bbef5802c53d7f6efda9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
DROP is only on error case, here it should return NET_OK if it was a
proper ARP packet and it got properly handled.
Change-Id: If347e80a76b3a56a9455b70d11b735c1fd910117
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The context buffer pool was introduced to deal with TCP holding buffers
when 6LO may modify them, therefore it makes sense to have it enabled
by default when TCP and 6LO are enabled given that the code can deal
with NULL pool in case the application don't implement one.
Change-Id: I600ca31ab40c96ee27937c2e885e332b0cee4995
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CONFIG_NET_BUF_WARN_ALLOC_INTERVAL can be used to configure the interval
used to print allocation warnings.
Change-Id: I914f2e0d43b3f00c201e49ff42a45fa950b2df94
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shell crashes if you try to retrieve IPv6 nbr reachable time
when CONFIG_NET_IPV6_ND is disabled.
Change-Id: I3c5b3b5614abf80373b892943fa1ab936d235f3c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Return proper verdict on handling of DIS messages. Otherwise debug
prints will be confusing that packet dropped.
Change-Id: Ia4e18d6238868e3aed4b17e2c9ea11aa432869be
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes, just refactored few rpl functions to
to align nicely.
Change-Id: I05c0397de7a8392cc781de2747802b2dd1bb8146
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Don't assume NULL returns are always errors.
Change-Id: I28d7a0fa6c848e338635010b1fdc9fc3e8440b27
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This might indicate buffer leaks or deadlock is happening.
Change-Id: If91a65ccfe1be9497b210de21e80b533b6739367
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Following changes are made:
1. Output using NET_INFO logging level. This function is not part of
automatic logging, and must be called explicitly by a user application.
But if it outputs using NET_DEBUG, then DEBUG level needs to be
enabled, and the output of this function will be drowned in logging
spam. So, let user to enable just INFO level.
2. Show entire structure of the fragment chain, *including* the head
net_buf which holds net_nbuf structure. It is numbered as -1 in the
output to preserve existing order (and not change existing size
calculations).
3. Show owning pool (and its properties, like buffer size/user_data
size) for each buffer.
4. Check for NULL pointer, e.g. for convenience of calling directly
from net_context receive callback (which will be called with NULL
on TCP peer closed connection event).
With these changes, a newcomer from one look at the output of this
function will be able to have a clear basic picture of network
buffer management in Zephyr, and recurring user will be able to
recall any details at once.
Change-Id: I8f9562748329d749f765cc6af7989a448256d7e0
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No functionality changes, just refactored net_rpl_update_header
function to align nicely.
Change-Id: I5b3e099593bb964245ca06c9fb2ec85859a0640c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Search destination address in IPv6 neighbor table. If it doesn't
exist in IPv6 neighbor table then go for routing. Added sanitycheck
to verify destination ll address is not the source ll address of
original packet (that means we are re-routing back to original sender).
Change-Id: I24adace6a0d17fbd1d2a36a5d75c79320de0a883
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_ipv6_nbr_lookup_by_index() will always find first matching entry
in IPv6 nbr table with lladdr index. But there can be multiple neighbors
linked to same lladdr index. So find route nexthop with ipv6_nbr_data
from nbr(ipv6 nbr) data pointer.
Change-Id: I5081d40330f5bc1ef0d96def03f4add4808b2fe9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Router lifetime timer initialized in router_init but not submitted.
Change-Id: If5a77f413832db52eff99e7191f82d2a8fc8f081
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Extra data size was not considered in nbr size calculation.
Change-Id: Idc572abf55c8f9fd19940edb719f58e02e7f8ecd
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Route lookup is necessary only if life time is
NET_RPL_ZERO_LIFETIME, otherwise lookup not required.
Change-Id: I25fb85c53e2d43cfdce08411af385f3ae26384cc
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If DAO message is routed through different nodes or sent directly
to a parent and ACK lost somewhere in noicy network. Node can not
join RPL mesh network properly. So try re-sending DAO message for
max number of trials (Kconfigurable).
Change-Id: I7f6a065deacd1e3942c89118ce8da4fbaa34af51
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When sending TCP data, check if the retry timer needs
to be started.
Change-Id: Iea90716e918dec0b22e60bf32467b11c0d1a296f
Signed-off-by: june li <junelizh@foxmail.com>
It needs to check if current event matches:
- cb's layer
- cb's layer code
- cb's command
If none match, it will not raise the event.
Fixing the unit test as layer must be always != 0.
Jira: ZEP-1940
Change-Id: Iadd63e751fa6e534a10e7da9cae0f5bb5a384461
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most (if not all) 802.15.4 devices can handle ACK replies by
themselves.
Change-Id: I0319d59de767b20eb67c1592bacaa4a7b7015cad
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that interface is not directly used in data and mac frame creation,
let's just pass context pointer.
Change-Id: If002e6790d044eeffc57cb5685ac9525fbd6e43c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that RFD is default, the extended address can be changed through net
mgmt API, and thus no longer be the same as device's generated mac address.
Change-Id: I07ee647615c2caa1994712147c6c8a2b4306900d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need of interface anymore.
After previous changes, it appears that net_if parameter is not used so
we can remove it.
Change-Id: Id3570f50865696818a9be2280172e2e25fc537f7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
commit id 7a11439020 changed this.
Hopefully that changed did not affect anything.
Reducing minimal frame length and applying the change everywhere where
relevant.
Change-Id: I5ae203751bfcf70cef833620106d2c2d0e33b7a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And use them accordingly in the common code part.
Change-Id: Id91b76e5baea607c0d68eebcde6f84e4e35ca44c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ORFD was a hack, from the beginning of the IEEE 802.15.4 Soft MAC stack,
but is now useless and can therefore be removed.
Change-Id: I74d5e1995993f4a0749b6d9d553406d5ae162bda
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to simplify when 802.15.4 is selected on these samples, let's
setup the device through a common code.
For this to work, RFD is now the default.
Change-Id: I46590864442f77d83f681cc0e854c94344648856
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's more readable and along with other part of the system.
Change-Id: Ib4be787d74310d838f38b1f1d5624e7357da8969
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These should be used by samples to fix basic 15.4 settings.
Change-Id: I31ad1540008ac760b7aef720e520bf8e72d3a805
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/SAMPLES/APP for name shortening. Applying the change where relevant.
Not only IP addresse will be available as samples settings there but
also IEEE 802.15.4 channel, pan_id, and more for instance.
Change-Id: I05dd24989bd0c804d9588092d67044a3e063bc88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be needed for Thread/MLE.
Change-Id: Ib421da66cfc4da8111ff131f08cac74a11674928
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These requests are used to set/get the key, the mode and the level of
the IEEE 802.15.4 link layer security.
Only implicit key mode is supported for now.
Change-Id: Ifbc9a5d08f9fbf0d51d6c3e4b650cfdce3d263db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Initialize the ciphers.
Once the header is parsed and validated, we get all the necessary info
to decrypt the frame properly.
Change-Id: I3142fa572c7566b40efe18cf9d4e3f2b4bce0612
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not only about decrypting and authentifying but also setting the
right frag's length after that.
Change-Id: Ifc766b212b37d4e3593c210f6646ee85dff2ab6d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Take into account the current security context to compute the header
size.
Provide the function to fill-in the aux security header in a frame.
Finally, call the generic encryption function which will process the
frame relevantly according to the given security context.
For now, only implicit key mode is supported.
Change-Id: I5412c32179e70217c0946b1b54d9a752375d522f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This provides the means to authentify with/without encryption or
decryption of a frame following a generic 15.4 security context.
Change-Id: Ia5dbb7f43936a8131112fe4b16c9780e30f904c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some call use a boolean for it, and since it's supposed to be 1 or 0
let's ask for a boolean always.
Change-Id: If4fbe5d58d5c25fb2a86719435c59af53ea02445
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When applying security, there will be needs for accessing payload as
well, thus providing the whole frag directly instead of a data pointer
on the ll part.
Change-Id: Ia97a1f07f2a12fc5cdf085c3cc6350d50b419cae
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will ensure basic auxiliary security header fields are relevantly
filled-in as well as moving the parsing buffer pointer to the right
position for further parsing.
Change-Id: Ib09e312add783b13bf8b59a81a2ffe64eb6f8dc2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These will be used to parse and create 802.15.4 frames with security
enabled.
Change-Id: Icad214c8d7aa658b8483bf601b091b266e1b8d77
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the destination IP address is one of our own address,
then reroute it back to us.
Jira: ZEP-1966
Change-Id: I8b93fc5425f3f18b0b9e85ca9a57cb122129c47f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The fields in "net conn" output were unaligned and looked
generally very ugly.
Change-Id: I56b29982d4f6b984405944d155bbb6c682383318
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that CONFIG_NET_CONTEXT_NBUF_POOL is set but
application has not defined any pools. In this case the tx and
data pool pointers will be NULL in net_context struct and we
must use the default pools instead.
Change-Id: I286f34c87d9182aace71e0a61f038945810e4916
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default timeout (4 min) is very long. Allow tweaking the
value via Kconfig option.
Change-Id: Iddfd48b96f3612b9bba7caa4d64357505df9644d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Match neighbour with link layer address. And get RPL parent with
matching ll address. DAG id different which is prefix based address
from the parent.
Change-Id: I75ecdfa7aa63da210676a3f44b8510d24c38d1d5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Let intermediate node reply DAO ACK only if it can not forward original
DAO messages to it's parent. If DAO forwarding is success let the final
parent sends DAO ACK.
Change-Id: I14ff9b5b110a639cad6415741dde71c2cdd222ef
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DIO message suboptions can contain PAD1, PADN, Metric container,
Routing information, DODAG configuration and Prefix information.
Right now we are not skipping PADN and unknown options payload.
Change-Id: I43557962784f68a223ea209eae5ca0367a3d5410
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DAO message suboptions can contain PAD1, PADN, Target, Transit
and Target descriptor. Right now we are not skipping PADN and
Target descriptor payload.
Change-Id: I89a9c3cb59de5397d1430f0fa5de95beee193880
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Parse DAO ACK from parent and analyze it.
Change-Id: I2394bd5e339ff00c87b9b4835dd5a21e2bafb2e5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Indentation is wrong for few options. And few options does not
properly aligned.
Change-Id: Ib4a8a90a17fd20ddd16ec6f29558eb937f035bb9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Earlier net_nbuf_copy() mangled the original buffer. So cacheing
src and dst address was necessary. Now original buffer does not
get affected by net_nbuf_copy() call. Cacheing is not required.
Change-Id: I25f60bc6db2a75612e562e56024d4459478d80b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Do not call callback if destination ll address is not set. This
happens when dst is multicast or broadcast.
Change-Id: I34dda92799a987d9cff031dc97f4a01b94437561
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There is no transition from tentative state etc... It should directly go
to preferred.
This is fixing ND processing when DAD is disabled: source address was
never set, as tentative state is not a valid in
is_proper_ipv6_address().
Change-Id: I6f0a0fdd99dd13d28849f9749f89ec21fdd370d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add "net dns <hostname> [A | AAAA]" command support that can be
used to query IPv4 or IPv6 address for a given host name.
Change-Id: I86b2258efa994a67163f9b3b340f44d65767f11b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the config file contains DNS server addresses, then
configure the DNS resolver to use them.
Change-Id: Ie7f2bdcf7ac4bb7ee0ecf7fb5b7bd2df3379cdc3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit introduces a generic DNS resolving API that can
be used by applications. Later commits will introduce a system
level DNS support which simplifies the DNS resolving so that
DNS server names can be given from config file.
Change-Id: I60fbc81e2a44928d2ca53d51e703b9cde222b382
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Length parameter was always useless, only used in debugging, so that can
be removed.
Change-Id: If597f424840f37955202fa5fe827dd992e4cf776
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Thus the ping command is more user-friendly: at least user knows the
ping got a reply or not.
Change-Id: I740a2f77d288f6287ac04c908f3d517a49df57d2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As it is done for ICMPv6. This will prove to be useful for implementing
an echo reply handler in a ping for instance.
Change-Id: I969a1da60f2a4ea59eee5c9983eb6e340923e2ef
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_addr_pton always returns -EINVAL in case of error, so let's play with
it to factorize the code.
net_icmpv<4/6>_send_echo_request always returns -EIO in case of error.
Change-Id: I89e5ccd4b936701f7dad194089dda845fab5d738
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Refining the names around IPv6's neighbor states to differentiate them
easily from any net_nbr related names (which are not tighten to IPv6).
Change-Id: Ibc24df2a9485477a53fe5fe1c8f993f0fcd91635
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Probably some refactoring left-over.
Change-Id: I9715441a54b2e675135ce4072651dcead3216d3b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We incorrectly changed the state from FIN_WAIT_1 to CLOSE_WAIT.
This caused ACK be sent in CLOSE_WAIT state when the connection
was closed by peer. Sending ACK in this state is not allowed
according to RFC. The connection was still closed but slightly
wrong way.
Jira: ZEP-1961
Change-Id: Ie4aa6818128d4190230b679e26ac9630c7d45d69
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can open a TCP connection (just one at a time) by
using "tcp connect <ip> port" command.
Data can be sent by "tcp send <data>" command.
Connection can be closed by "tcp close" command.
Change-Id: I75aedd873a30575a6f742926b716afb7dbbfb92b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes, use separate variable so that we do
not need to do big-endian conversion multiple times.
Change-Id: I8874b427bd39dfa2d952034a2623c47544a644fc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 router is added, then NET_EVENT_IPV6_ROUTER_ADD event
is generated. When router is removed, NET_EVENT_IPV6_ROUTER_DEL
is then generated. This is useful info if we want to have a generic
connectivity to outside of our local network.
Change-Id: Ia03958a071ceb998127894025c99ab72a8b648d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the bind port is set to 0, then return the real bind port and
show it in the debug print.
Change-Id: If75b52bdacfc916329222d0d9e8aa4669e7a7160
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
- Rename struct net_l2_offload_ip to struct net_offload
- Rename struct field offload_ip to just offload
- Rename include/net/offload_ip.h -> include/net/net_offload.h
Change-Id: I3cd891c2b13e0e8f3ad1c66264f90b5031ae17c2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
This patch simply renames the NET_L2_OFFLOAD_IP Kconfig variable
to NET_OFFLOAD.
Change-Id: Ic8b1d004cbac09b7c636475aaed75b0a31e4be1c
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
When route not found try with default router if it exists. Consider
default router as nexthop. If default router also does not exist
then drop the packet.
Change-Id: I56cc9e4a1432fc25687cbaea600bfe9cf5b1d51e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No memory leak but debug prints shows buffer dropped due to
NET_DROP verdict. Added TODO comments to support DAO ACK.
Change-Id: I32deb2e1d2eea98f19ef26ad429ba8d03ae13751
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When an intermediate node received DAO message, it should forward it
to its parent (if exists) and it ack to orignal DAO sender. But
dao_forward() function steals frag chain from original buffer. Src
and dst address pointers to original buffer are not valid to
continue in dao_ack_send. So cache them for DAO ACK.
Change-Id: I3a4df4837a133afe4e2badb183f729c37d267f63
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When DAO message is required to be forwarding to a parent addr,
only frag chain and iface is considered. But for newly created Tx buf
other metadata also required. In this particular case setting
inet type, ip header length. Also update checksum as dst address
is changed.
Change-Id: If0e0a52e943db66be4aeecb6d0e3b9d7c3f04f58
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Path lifetime exists at 6 byte in RPL Transit information. So after
type and option length 3 bytes should be skipped to read lifetime.
Change-Id: Ic90c3bd75e3c7c63ffe9be27c0d206fc8fd58604
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
NET_RPL_DAO_ACK Kconfig option was missed. subsys/net/ip/rpl.c has
functionality of this option. By default it is disabled. Enable it
if you want to know the status of DAO message.
Change-Id: If5ed86c9c8c6c62991fc92d2f1e2a35331811356
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If DAO message is not inteded to destination node then
intermediate node will forward original message with final
destination address. But verdict not passed properly.
Change-Id: If61c7b683b55b24b68f5235d0eee5ed60b611aef
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Unref the buffer if net_context_sendto() fails to send.
Change-Id: Iaae81f3044ad7197974493018b873bb76b2c0760
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Two size_t variables were printed using %d which gave warning
if RPL debugging was enabled.
Change-Id: I6bc135c76a31da304e94af34ecd571163ddf2a0e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Selecting RPL will need to enable NBR cache support,
it is not enough just to select IPv6.
Change-Id: I8162497111354d0fa9e44564fa5cc5ee46110b96
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of simply dropping the packet if the destination IPv6
address is not ours, try to figure out if there is a route
to real destination and then re-route the IPv6 packet there.
Change-Id: I6b2a0d7096b3d7877b82b04f38e3a6e588587c11
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_delayed_work_init shall only be called once per work and not every
time before as that can trash the workqueue list if the work is pending.
Change-Id: Ib04b6689c59d03328687b0b579e80012dbd2f853
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
k_delayed_work_init shall only be called once per work and not every
time before as that can trash the workqueue list if the work is pending.
Change-Id: I454f40b63133bb7d6239dbe902858932bacfc454
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Print TCP header information in one line as there is really no
need to use multiple lines. Also use debug level when printing
the header info so that it is only seen if debugging is activated.
Change-Id: I27f314ca060239545769dec07148897da3426436
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_delayed_work_init shall only be called once per work and not every
time before as that can trash the workqueue list if the work is pending.
Change-Id: Ib6398a6a843dd4d820529487ad76a9dc9d9e152e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Due to commit 8308b9bd2d ("net/http: Add the HTTP/1.1 API")
every user of CONFIG_HTTP_PARSER would need to add CONFIG_HTTP to
their .conf files. Which is fine for intree samples/tests as they
have been adjusted, but the rest of world working on Zephyr apps
will need to make this changes as well.
Instead, we should have each of the following select HTTP instead of
depend on it, which will make future use of these configs and their
dependencies more intuitive:
HTTP_SERVER
HTTP_CLIENT
HTTP_PARSER
NOTE: As cleanup, this commit also removes the CONFIG_HTTP added to
samples and test .conf files.
Change-Id: I81cfaa19e37333b1bf98778f8147814780e7f77c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This fixes warnings when using %u to print the result of sizeof.
Change-Id: I5391456c855ec2785af22467d9d0f355bbb1e577
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The return code from net_icmpv{4|6}_send_error() was not correct
if the error message could be sent. Now 0 is returned if sending
succeed, and <0 otherwise.
Change-Id: Iff67f097a9d9519c9f11d4cbc9cf428a7c74ec1b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update statistics for every sent, received and dropped
ICMPv{4|6} packet.
Change-Id: Ibe6f02e8222adb3db1f1dbd0cde1ed251710eb43
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are replying ICMPv{4|6} message, then do not wait forever
for a free buffer. In a busy system, this might lead to non-progress
in RX path if we receive lot of packet from the network and never get
a free buffer.
Change-Id: Iaef92541b8745f872a07bc6e2052d0393d4d1e8b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
commit 2e3e93dccb ("net: 6lo: Fix compress bit calculation") adds
a bit shift to the compress bit calculation, however it's typo'd as
a greater than comparison causing get_6co_compress() to return a
boolean value rather than the shifted version of the calculation.
Change-Id: Idacac2c032a03f1f75a78c94bed4c70428b8c77a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The IPv6 prefix address length was incorrectly set in net_if
after RA was received from the network. The incorrect "len"
variable was used instead of correct "prefix_len" in the prefix
info struct.
Change-Id: Ifeaf150b9960414d2ad200053a3bd5290dc8d365
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the earlier prefix timeout is not cancelled before setting
it again, the system will hang.
Change-Id: I6e271294c8e5d43e3ceae4780b5d1c26bab2b296
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The caller semaphore was released too early, this can cause the caller
to re-use the data and possibly corrupt the memory, if caller yields
and is run before this management thread. Solution is to first remove
the node from the list and then unlock the semaphore.
Change-Id: I02cef53559d776f32a5959380e6b7122cd5198c5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add CONFIG_NET_IPV6_NBR_CACHE option that is the base for both
neighbor discovery (ND) and duplicate address detection (DAD).
Both ND and DAD can be disabled if needed. If NBR cache is
disabled, then ND and DAD are disabled too.
Note that it makes not much sense to disable DAD or NBR cache
as IPv6 will not work properly without them. It is possible
to disable ND but then the neighbor information needs to come
via other sources like RPL.
Change-Id: I57c8668ad828b3a153dfc58eea78bf5f7ac3938a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Although very unlikely, I saw crashes at startup that could
be because of the buf or iface were null.
Change-Id: I8649eeb4f24fcd7d9f2acaeefaba4e6593388e91
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The fragment pointer is good to print here.
Change-Id: If09e684bbe0f9f5d3f961c4af8f86fb3ff364671
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If for some reason the neighbor solicitation cannot be sent,
then we need to unref the pending packet as that would never
be freed otherwise.
Change-Id: Ied12a9b3a027a2aad3fafd0b5b36c56b5f042c28
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are trying to send a IPv6 network packet and there
is no data, then print error.
Change-Id: Ia0e7bebae513f1bcf984e189566ae7e10a90bbfc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When going through fragments in update_ll_reserve(), use
net_nbuf_unref() in order to get better memory allocation
debug prints.
Change-Id: Ia7ee15b32800acdebeb28125465515132c55e179
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to receive anything if network interface is down.
Change-Id: I22d62aeaf4fbef54608818bf6c8073ec2e9a7c09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that both the TX and RX threads are running before
we turn the network interface up.
Change-Id: Ie7e5938403e90e1ae76047c221cf9fd2f5a1167b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case of callback based event listener, it is easy for the callback to
filter on the given interface. But in case of the synchronous call it's
not: it would need, after a failed comparison on the interface pointer
to loop by itself on the net_mgmt_event_wait() which is a little bit
heavy (reinstalling the event listener, with the semaphore and all) and
a bit of a burden for the caller itself.
Instead, net_mgmt provides a dedicated call
net_mgmt_event_wait_on_iface() which does it the right way, so the
callback and the related semaphore are destroyed if only the iface
matches the one given as parameter (besides the timeout obviously).
Change-Id: Iab05c3249586f4f4d0447eea42fdac72b8428f2e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of creating a handler and a related callback structure on an
event_mask: net_mgmt_event_wait() can be used to wait synchronously on
such event_mask. The core mgmt part will seamlessly reuse the struct
net_mgmt_event_callback so the whole internal notification mechanism is
using the same code.
Change-Id: I426d782c770e75e5222aa3c5b703172b1f1f2e5e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not enough to know just network address and port number to
disambiguate an endpoint, protocol (TCP vs UDP, etc.) should be
known too. Without this patch, there is a confusing output from
e.g. echo_server if both TCP and UDP is enabled.
Jira: ZEP-1086
Change-Id: I247a2dfc87df634ceac3b8733d7349b1d6aca80c
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This function is useful for logging in other parts of network stack,
so allow to reuse it. (Will be used for net_context logging in a
follow-up patch).
Change-Id: I8238874584f8f039c94e5d827265944d97d13f6b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
NET_IF_UP may change during the lifetime of k_pool which means we would
have to reconfigure everytime the flag changes but NET_IF_UP is already
checked during net_if_send_data thus it should never reach the queue in
the first place making this check unnecessary.
Jira: ZEP-1888
Change-Id: Iaa8471bee886a6f7e701a1dd243fb199def26589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current finalize api's takes buf as input parameter and returns
the finalized buf. But if there are any issue while finalizing,
it failed to throw an error.
Change-Id: I6db54b7453eec41a8051fab50d5c0dc937debd54
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When IPv6 header contains extra header (e.g. HBH), extra header length
was not part of app data length calculation. Result applications get
invalid total length. Also simplified set_appdata_values().
Change-Id: I07438d62dfd0f9abc1452484deb8b5eacdc37cf1
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for adding IPv6 extra header (HBH) with RPL options
in ICMPv6 echo reply.
Change-Id: Ibd0b96362a7d5a5f668a18d6a33e6917d37dc51c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As per RFC 6775 4.2, context length holds number of leading bits
in the Context Prefix field that are valid. Rest are not valid
for compression.
Change-Id: Id21cc2d7a5d42980cf9295f85e75c4869ff6cb99
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a nodes receive a packet with RPL option in IPv6 HBH, it's need
to be reverted with node flags, instance id and sender rank.
Change-Id: Ic49c8e84c7846dc02728c120078506f6d7411e52
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RPL extension header verify function takes input parameter as
metadata 'buf' and start reading from it. Instead it should start
reading from fragment (buf->frags). Also API should return
fragment and offset where caller can continue reading it.
Change-Id: I80612144aed55aa2dcf9eaab1f4408e10efdda31
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Make sure the neighbor cache is printed nicely in table
format with columns aligned.
Change-Id: I5323fdc644317ea08fd4694215f8cd44f8d7ff74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use dns_answer_type instead of dns_response_type to reflect that
the routine refers to the DNS answer RR.
Change-Id: I6d01add4a1b090b83a0708326a52b7bb945c8d23
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The net_byte_to_hex() prototype first parameter was uint8_t *,
but it should have been char *.
Jira: ZEP-1885
Change-Id: I6132a67bb9e8199de88451fb4e446081f401e8f6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We did not handle NUD (Neighbor Unreachability Detection)
properly and did not go to DELAY state when neighbor
reachability was checked.
Change-Id: I127d25124aa806c44ff37c1355cc3db7fb25b2d2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print timer information when creating and expiring the
reachability timer.
Change-Id: I5c8fee91de85fe7c9ea7c467f45dbb105250d5b1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send_ns timer was used instead of reachable timer when
the reachability timer was expired. This meant that the
reachability timer was never restarted after it expired once.
Change-Id: Iccbd6d019d1106adca60f7319bc4c547cdb1d924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print the neighbor pointer address and remaining time when
viewing the neighbor cache in "net nbr" command.
Change-Id: I13840ccc16c31c99a803ec1b7afe69879bd639f2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the proper API to get the remaining time in prefix timer
and return the value in seconds as expected.
Change-Id: I055ce0ba6092c23ad60d6775ce75a0a67ad91d26
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to verify that the neighbor is reachable, send
neighbor solicitation message to neighbor which should then
send neighbor advertisement to us so that we can then mark
it reachable.
Change-Id: I2c45ee4a6982c698ef6c8fa1acccb995aadf8ee6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to be able to debug IPv6 neighbor state changes,
pretty print the state names when setting the new state.
Change-Id: I64e0b4173eaa63c9715c17420a008602759aa4fa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To be used by net-shell and other files for debugging neighbor
state.
Change-Id: Ie9b09a54a05dcb066906a3697dfe38aeffc886e6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "null terminator" for the chunked transfer encoding must be
added only if the payload is present.
Change-Id: Id325a660f060b3a3468bcca16a079def11b8c3ef
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
No need to print error if we have already joined a pre-defined
multicast group.
Change-Id: I1237d5fbf0b63267ccb00432522513358c48d31d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Wrong type modifier %zu in debug print, should be %d.
Change-Id: I82feca91d9e083a03263477569c552acc7c9767f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Patch 235118245864491a592245f57e5244bf61711943 did not set the ll
addresses in the right buffer which causes 6lo to unref buffers
causing a double unref latter.
Jira: ZEP-1890
Change-Id: Id7591ef3c20c7ab62dcb04576406d70602baa129
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
IPv6 fills in lladdr_dst properly according to nexthop. Thus it's
useless to lookup again for nbr when creating data frame etc... Let's
use this directly. It both optimizes the code path as well as implements
proper nexthop frame sending.
Jira: ZEP-1863
Change-Id: Ic17a1b14a0db0692d31419ea2f45a5f288a09fb5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch adds the HTTP/1.1 API for Zephyr. This API consists of client
and server context structures enabled via Kconfig variables.
HTTP parser support is enabled via the CONFIG_HTTP_PARSER configuration
variable.
Currently, this API only includes support for writing HTTP requests
(client mode) and HTTP responses (server mode). TLS support is not
considered in this iteration.
Supported HTTP methods:
GET, HEAD, OPTIONS and POST.
Supported HTTP responses:
400, 403 404. The http_response routine may be used to write
any HTTP status code, for example 200 OK.
Jira: ZEP-1701
Change-Id: Ic9ccd4d4578d6d0f3a439976ea332b031644ca7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to recent TCP fixes for 6lo, we are making a copy of buffers
sent to net_tcp_send_buf() so that TCP retransmit can send the original
(unmodified) buffer. This original buffer is freed via the TCP
sent_list when the related ACK packet is received.
However, there are users of the net_tcp_send_buf() function which
will never get a corresponding ACK (and do not add the buffer to the
TCP sent_list). An example is send_ack() in net_context.c. In this
case, we leak the original buffer.
To fix this leak in the 6lo specific block of net_tcp_send_buf(),
let's check to see if the original buffer was added to the TCP sent_list
and if not, then avoid the buffer copy process entirely.
Change-Id: If99e0e5bf266d33dd3466dc5d74443eaa39d10a8
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The static keyword is missing in the dns_find_null function definition.
Change-Id: I19c89ca61b6ff550bf7ccb2ca9065a957532ede1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Don't break the line after the static keyword.
Change-Id: I51343124ae3b3a2f9b4916c5279ba09b8c08fd9a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Instead of magic constant (0) use the K_NO_WAIT when spawning
a thread.
Change-Id: Ib3a181fdfa246843d9c708592ccc754e54bc6005
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the networking cannot work without RX or TX threads, mark
them as essential.
Change-Id: Icb52c77fcdcef35d77c36e5ec855fed438a38407
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot join pre-defined allnodes or solicit node multicast
groups, then print error. Typically this will happen if the number
of multicast IPv6 address records is too small in net_if struct.
Change-Id: I12211cff90ef4edc856f1432cab0c37aae9a1bd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is only needed when doing unit tests.
Change-Id: Ifd4e5e8ea98e3ab2344ed0c19d92f2be7d8008f8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect number of received, sent or dropped multicast listener
reports and queries.
Change-Id: Ia5c08203155475763f96df23f44eceffa7569873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive MLDv2 (Multicast Listener Discover) query,
we send out information about the multicast groups that
we have joined.
Change-Id: If4ea9fa685319b2ad900e1949a5cbe12e7696b43
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As dictated by RFC 3810 ch 5, we need to add Hop-by-Hop option
with Router Alert sub-option to the sent multicast listener
message.
Change-Id: I8e3ed58fff4736e9708276a3185f94e7f2b453a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are taking network interface down, then flush the TX for any
pending bufs that would be needed to be sent.
Change-Id: I229ecce8e07ec5847d4c6c6a1994de04bd9171e2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the multicast address already exists, then do not give
error but try to join it.
Change-Id: I32ffa6b3bf0798011d684a1a21e87e389f1f0380
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When network interface is taken down, leave only those
IPv6 multicast groups that were joined.
Change-Id: I414556c093ba67be7c13e6c86e0451465c2203f3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Send management event if we joined or leaved IPv6 multicast
group.
Change-Id: Ieeb407ef88fb3bf4cd92d4fb4b69f03b260474e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we setup the network interface, add predefined IPv6 multicast
groups into the network interface. When interface is taken down,
then leave all the multicast groups that joined.
See RFC 4291 ch 2.8 for details.
Change-Id: If17d3e8c75157a02aa93c92e2fb499619c1484cf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This and subsequent commits adds API to join or leave
an IPv6 multicast group.
Jira: ZEP-1673
Change-Id: I26dcfe16a4527dbf7886a30827a5d4ebfdeaac01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tcphdr->offset was not set when tcp options were added.
Change-Id: I19fe97983ce81948a9a84893183e5c9000f12767
Signed-off-by: june li <junelizh@foxmail.com>
There are no users of net_tcp_set_state() left outside of
subsys/net/ip/tcp.c.
And the naming of this function is confusing -- it could easily
be mistaken for net_tcp_change_state() which contains additional
logic for certain tcp states.
Let's remove it entirely and fix the remaining uses to set
tcp->state directly.
Change-Id: I92855ad180e8682780fcff11e50af06adcbc177c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In net_tcp_release() when a TCP connection is being closed, we
should call net_tcp_change_state instead of net_tcp_set_state.
net_tcp_change_state() will call into net_tcp_set_state() but
also contains logic specific to NET_TCP_CLOSED which unregisters
the context's conn_handler and sends an accept callback (if
present) with -ENETRESET error for user code to handle.
This fixes an EISCONN error returned by net_context_bind() when
a TCP-based net_context was reused. Due to the conn_handler
not being cleaned up in the TCP code.
Change-Id: I8439a028a1c7ae5fd2a50d11caa9947a0ac6c7d4
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The parsing of IPv6 extension headers was skipping bytes
in certain cases.
Change-Id: I80612144aed55aa2dcf9eaab1f4408e10ef9ca31
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Compress bit calculation was wrong. It should be moved
to 4 bits left to cache it properly.
Change-Id: Ib011874881a69032795c2ecfd9a615b6cf559c69
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Max 6lowpan contexts are 16 as per RFC 6775 4.2 6LoWPAN Context Option.
Range is 0 - F. So context id '0' is valid.
Change-Id: I8468a805e0145b64921139a587cdaeeb9d6871b8
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If hoplimit bit is unset then values are inlined as
per RFC 6282 3.1.1 HLIM: Hop Limit.
Change-Id: I5821fdf1a4a65b252362277cc604ae913203f80e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Hop limit compression should be after next header compression as
per RFC 6282 3.1.1.
Change-Id: I0eaf3428bf835fe73831a7fe6fb708b73c8f5d12
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_nbuf_ll_src(buf)->addr and net_nbuf_ll_dst(buf)->addr should be
pointing to ctxt area not actual net_nbuf_ll region since the payload
over Bluetooth does not carry any ll addresses.
Change-Id: I87828d74abf2402fdf2a5e34aa8db93aa7c50d08
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the packet contains IPv6 header + Extra header + ICMPv6 headers,
last header does not contain 'next header and length' fields. So
while parsing header we should first check next header and continue
parsing. Otherwise we parse 2 bytes extra and set invalid ext hdr len
and handover to other layers. So everything goes wrong after that.
Also simplified next header parsing to minimal.
Change-Id: I5d8235c5a57c8b77adf6a07eb8eb74350a3e4dc6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the buffer contains IPv6 header, set header length only once.
Need not to set it in different scenarios.
Change-Id: I54ab9a4259851c9230db240f6091e3190d25b6cb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If RPL is not enabled do not handle RPL options in IPv6 extra header.
Issues will arise if we skip reading those bytes and continue further.
E.g. Upper layer protocol like ICMPv6 echo request does not prepare
proper echo reply if we skip like this. It doesn't know what options
need to be updated in reply header.
Change-Id: I250672a54d4c7f60727313f6e7f8fe902685d0c5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verdict not assgined to its proper value and return NULL in case
of read error. Also simplified error handling.
Change-Id: Idf4c5e242066dfd03e1519271dc1ba38ec43e6ce
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verdict NET_DROP returned even though it handled properly.
Change-Id: I61e04b12f971b39585e983aa9a1007c63acd8b4e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Debugging code snippet inside handle_echo_reply() does not look nice,
just provided inline functions and simplified it.
Change-Id: Idc3a9284153aaa04d0431a9dd705c4f1c51b817d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Earlier net_nbuf_copy_all() mangled the original buffer. So cacheing
src and dst address and other values was necessary. Now original
buffer does not get affected by net_nbuf_copy_all() call. Cacheing
is not required.
Change-Id: I8a8534f7ec299853b9b296d85e8aacecd3768c8e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Variable len is not used in net_icmpv6_input() and if required
it can be obtained from 'buf'.
Change-Id: I4b0710e1cf16cff9837173ad9d6908ec54ebafae
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
TCP support is already implemented so it can be removed from
TODO file.
Change-Id: I27690120959ffa1e15891e3210bbcc38a3898359
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
If a UDP context had net_context_recv() called before
net_context_bind(), then it will have a stale connection handle
associated with initial (random) port number, while will be "bound"
to a new port as specified in net_context_bind(). So, it silently
won't behave as a user expects. net_context_bind() should really
update (or destroy/recreate) conn_handle in this case, but until
it's implemented, apply stopgap measure of at lease reporting error
back to user in this case.
Jira: ZEP-1644
Change-Id: I22ad55f94eaac487a4d5091ccbb24f973ec71553
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Print information who freed the net_buf last time if this
can be figured out. This info is not fully accurate if there
is lot of allocations going on but could give some indicatation
who was using the net_buf previously.
Change-Id: I3d4463c54a9b944847a532d951fb6d2303fc06cf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we could not allocate a buffer while unfragmenting, make sure
that all the created temporary net_buf artifacts are freed and
we do not have a memory leak.
Change-Id: Ib98ae32eb4a0f9b5f92c51e9713fd8e6d78b10da
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It is possible that the cached buf is NULL so avoid nasty
error print by not trying to free NULL pointer.
Change-Id: Iec53164f6ffab4b830aba63a1f351ca2349a43ff
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If net_nbuf_read() or net_nbuf_write() offset adjustment fails,
print the offset value in order to make debugging easier.
Change-Id: I899998bdcbc91a25ed7d71a599a5052a6fa4ee36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Show only what would be freed when debugging the allocations.
Let the net_buf_unref() to delete the individual fragments.
Change-Id: I1a39a553f12d73b78c4ba08be0e8e8252b666c8e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net stacks" command will also print main and interrupt
handler stack sizes.
Change-Id: I1b867be81ac8b4f6d9446f484ebb8b1d852b98b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_nbuf_frag_del() so that we can track net_buf frees.
If CONFIG_NET_DEBUG_NET_BUF is not defined, then this new function
will call net_buf_frag_del() directly, and if not, then it will
track memory usage.
Change-Id: I5f382436cebc71fdaf12baf7bf964fb63bee7aca
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds "net allocs" command that can be used to
track net_buf allocations that are done by net_nbuf_get*()
and net_nbuf_unref().
Change-Id: If3dc2ecf5552f8008138ee9733458a19f9764c13
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can track memory allocations and deallocations.
This is enabled by CONFIG_NET_DEBUG_NET_BUF option.
Change-Id: I9d83b9b63fb2b141c9a283887f1770bb4232f61c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to set the buf to NULL as it will get its value
from net_buf_alloc() call anyway.
Change-Id: Ib3a32b6e4cb4b446761b6a97a88c20fc52d3d683
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add description what happens if NET_DROP is returned from
L2 send function.
Change-Id: I371de725b710041bb26a141f9860c0062fb1ef5d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always calling net_nbuf_get_reserve_tx() with zero
ll_reserve (first parameter) and then setting the link layer
reserve separately, pass the reserve to that function which can
then set the ll_reserve in buf itself.
Change-Id: I21c14cb7e2e6c36d170c09998bca0207ecf65c75
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ll_reserve parameter is useless in net_ipv{4|6}_create_raw()
function as the reserve information is already stored in buf.
Change-Id: I7815a78c001e3da532478c04b3dac9b37bbc723c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The code used net_nbuf_get_reserve_{rx|tx}_data() function to
allocate a fragment. Instead of that low level function, use
net_nbuf_get_frag() instead. There are few places this is not
possible or is too big change like in few test programs.
Change-Id: Ied7e2b7db352de998b200ffa6ff82471bfa5ebe3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_buf pool address is not very useful so print the
user friendly name of the pool instead.
Change-Id: I1c64621c816832d2459819490ec5609f5c39f9f1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The columns were not aligned properly.
Change-Id: I551d04182c2877a29bb02a9da5400d74a080a1c9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not shortcut the sending side for TCP as we need to use
net_tcp_send_data() to send TCP data in order not to have
double unref in Bluetooth or IEEE 802.15.4 technologies which
has a special TCP packet sending logic.
Change-Id: I077db336c6335ccdbbafa4600f98388ecf33955f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When sending TCP data using 802.15.4 or Bluetooth technologies,
the 6lo code modified the original IPv6 header. This caused
issue when acknowledgment was waited to the sent packet as
the code could never match the sequence and ack numbers in
TCP header.
This commit changes this and the packet is cloned when sending
it so the 6lo code will modify a copy of the data and will not
touch the original packet.
JIRA: ZEP-1719
Change-Id: Iae51f35d5b5ada0d2543b58a29abbf10f146777e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Enhance the connection debugging and print the UDP and TCP
checksum when the packet is received.
Change-Id: I1ccf58a299178277fab0667b01d54ad7bac38663
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is lot of network traffic, it is possible that all the
network packets are allocated by network driver. The device driver
places the received packets into RX queue. Then that queue is read
by 6lo code. During the uncompression, the 6lo code tries allocate
net_buf in order to place proper IPv6 header into it.
If all the data fragments are in use at this point, then 6lo cannot
continue and it blocks while waiting available net_buf. This leads
to deadlock in the stack.
The solution is to change the 6lo to allocate the net_buf using a
timeout which will cause the received packet to be dropped if it
cannot be uncompressed because of out-of-buf situation.
Change-Id: I137f02b05193e16c45da8804974d357c920c861d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When doing 6lo compression or 802.15.4 fragmentation,
use the API that uses dedicated net_buf pool if that
support is enabled by the user.
Change-Id: Ic6651c393832c759eebb66a41db31c9067ebb4a9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It makes no sense to modify the original net_buf so change the
copy function not to touch the original buffer.
Change-Id: I5d22445ce50cee62994c36567f0e995a500cb89d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The first parameter of net_nbuf_copy() must be the head
of the buffer chain i.e., it must contain the user_data
part. If a fragment is given, then we do not know enough
information to allocate the data fragments.
Change-Id: I052b183d8c63d7326b320254f36f00b2fc48b0a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about various network buffer pools in the
system. This is useful in debugging the buffer allocations.
Change-Id: I31123c6f1f6647f77503f32e268c174330762128
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure its own pools for data that needs to
be transmitted out (TX). This helps to avoid deadlocking
the system if user space application uses all the buffers
in the system, and the core IP stack tries to get buffer
that needs to be sent out.
By default the net_buf pool support in net_context is turned
off as application developer needs to create the pools and
tie them to desired contexts.
Change-Id: Ida4a1771d34d6c250974e56fba4f0e0b2592cb29
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the pool contains now more accounting information, there is
no need to keep track of this data in nbuf.c.
Change-Id: I7fd44f9feda8fd9816356556d1e788ad56e6eedd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding this information to the pool:
* number of available (free) buffers in pool
* total size of the pool in bytes
This can be used when debugging net_buf pool allocations.
Change-Id: I4212fcddb1affdf53e0827c88473d3380e2a4929
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rewrite the dhcpv4_t1_timeout() handler to explicitly handle all
states.
Change-Id: I6f9d6c8cfacd945e24eb66c6440bf305d528c521
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The iface handle checks in the both timeout handlers are unnecessary.
Drop them.
Change-Id: Ie7c884b2ea648f700fbefa8382341036a4db063f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Correct the logic that determines when CIADDR is set and when it is
left as all zeros. RFC2131 requires that CIADDR is only set when the
client is in specific states.
Change-Id: I93a45e355fbef8d11dba5ac194570b87c594656e
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
RFC2131 places explict requirements on a client w.r.t which messages
are broadcast and which are unicast directly to a server. Notable
rules as they apply to the current dhcpv4 implementation are that
DISCOVER and a REQUEST in response to an OFFER are broadcast. A
REQUEST in state RENEWAL is unicast. There are further rules relevant
to the REBINDING state which is not yet implementated.
Adjust the current implementation that always uses broadcast to use
unicast as required by RFC2131
Change-Id: I6edef4241bcd74623a804a73415888cd679888d0
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
RFC2131 requries that a client MUST NOT include server identifier in
DHCPREQUEST from state RENEWING.
Change-Id: I0fba703f3a3b218af1ac03f4f1f0daa290bd428f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The DHCPv4 client obtains resources from the server on a lease. Once
a lease expires those resources must be relinquished.
Update the DHCPv4 client to explicitly remove leased resources from
the network stack once a lease has expired.
Change-Id: I5d3b7a02e463041cfdee1d104f5962498bdd6a30
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The existing dhcpv4 initialization code places all initialization in
the per iface dhcpv4_start() code. The net_udp_register() setup needs
to happen once for the dhcpv4 instance rather than once per iface.
Subsequent patches in this series also need a place to perform one
time initialization, independent of iface.
Factor the one time setup code out of the existing net_dhcpv4_start()
into a dhcpv4_init() function. Rather than use SYS_INIT() to run
dhcpv_init() we hook directly into net_init().
The prototype of dhcpv4_init() is shared within the net subsystem with
a new private header file deliberately to avoid exposing the function
via the public API in include/net/dhcpv4.h
Change-Id: I3502a53cc3bfe4db4e4cd22c02ae133c266fdf10
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Factor out common code associated with entering the REQUESTING state.
Change-Id: I0fc038a49309625c24b874dfda0355794cd41da9
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Factor out common code associated with entering the SELECTING state.
Change-Id: If34929e5f13dff7650388a2b491a01cbbf5dc100
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Refactor send_discover() to provide a clean separation between state
machine and action.
Change-Id: I96510cc6a7ab16216821fe65ea4289a78f6443aa
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Refactor send_request() to provide a clean separation between state
machine and action.
Change-Id: If4c61c5789c919ab3ce6c1f914afc243176760d8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Split handle_reply into distinct state machine and actions.
Change-Id: Ib177c7a4007662f941f156acfa5791e1d27e3d73
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The dhcpv4 state machine implementation names differ from the names
used by the relevant rfc. There is no good reason for them to be
different, so rename them.
Change-Id: I837f1bc4788c0ed4d2949b12eb6f5bfeef9a0be8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
There are two implementations of dhcpv4 state name numbers to human
readable strings, unify the two.
Change-Id: I1d654918bb919108a0d8c5514b309b193c9c3f96
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The dhcpv4 state machine has a dedicated context within each net_if
structure. For reasons unknown the timers used by the dhcpv4 state
machine have been placed in net_if outside of the dhcpv4 context area.
Relocate them into the dhcpv4 context.
Change-Id: I0531f493610dffda9ca9208993597a5665bde997
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Change the message type representation from integer to enum, this will
help prevent re-occurrence of recent issues where states and events
are interchanged by making it more likely the compiler will see a type
mismatch.
Change-Id: Ia235afda428a9e5dfbd933e02beeae468b4c84a2
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Refactor and simplify packet construction. This resulting code is
simplier, easier to read and compiles a lot smaller.
Change-Id: I43c67d79fbb77f85af54355eca41f516054cbba3
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This function is used only within net_context.c, make the symbol static
then.
Change-Id: Ib2c00a21c25e8c6a1404d6345d4b8ae05b779525
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
'query->value' is a 'const uint8_t *' so it should be casted to a
char (signed) array before it is used in places where a 'char *'
is expected, strncmp() is an example.
Jira: ZEP-1810
Change-Id: I94cf780a40ad5fed29607d2302dc7a10387bb86f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Since we try to match with POSIX behavior as much as possible, let's
not bother the user unless they need to be bothered. The recv(2) POSIX
syscall won't return 0 on stream sockets unless the connection has been
closed by the peer; however, that was happening with the callback set
by net_context_recv().
Change it so that the callback is never called if operating on a stream
socket and appdatalen is set to 0.
This is similar to a previous patch sent by Michael Scott in [1], but
not relying on the actual TCP flags: only on the appdatalen and the
socket type.
[1] https://gerrit.zephyrproject.org/r/#/c/9949/
Jira: ZEP-1632
Change-Id: Ib0c214fc9269d305a03e8d85eb606f106c45b038
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If the DAD timeouts, then the pending pointer will be null
when we remove the neighbor. Fortunately this only prints
this error message and does not cause any issues in the code.
[net/nbuf] [DBG] net_nbuf_unref_debug: (0x00118350): *** ERROR *** \
buf 0x00000000 (nbr_clear_ns_pending():175)
Change-Id: I3e11d4aa1d90f205df591b5d5cdcf2ee7bde6c01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that the buffer waiting for retransmission is modified
after it is sent, for example, it can be compacted by 6lo, and our
assumption of where is the message ID is located in the buffer is no
longer valid.
As the message ID is the only information that is necessary for
keeping track of retransmissions, we keep a copy of it in the pending
struct, as well as the destination address of the retransmission.
Change-Id: Id33d54353404628673541225a1a05e27ee08765f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When we do DAD (Duplicate Address Detection), the local IPv6
address gets added to the neighbor cache. This is useless so
remove it after DAD has finished.
Change-Id: I9625d367e96d8108a7d3d1d8b2e95f3c4ea11c45
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_ipv6_nbr_rm() utility function that can be used to
remove an IPv6 neighbor from the cache.
Change-Id: I9794856a4f65c5e943656970648e5c5762b0338c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function to go through all the stored neighbors
in the IPv6 neighbor cache.
Change-Id: I42fe0ec48c000215403aef63629d0763189ebdbb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sequence and identifier fields are 16-bit instead of 32-bit
long. This did not cause any issue in Echo-Reply but those two
fields should be set properly.
Change-Id: I5e4878f53d6bb37660d46d173159d27bbe0e94dc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP header was not sent back to originator when ICMPv6
error message was prepared to be sent.
Change-Id: I171bd724c4260b83d7d1c37e0894f9ed8cddd2c9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to see who is freeing the fragment, add function
and line information to net_buf_frag_del() when net_buf
debugging is activated.
Change-Id: I732f579fab2390cb16804cb35b83f46e65fca342
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP maintains 'sent_list' for retransmission if it doesn't get ACK for it.
Same list is not freed on net_tcp_release() call. This causes memory leak.
Change-Id: I2b2def1ea19487cc48ea4fbb6343ef0c773f288f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Due to commit fece856959 ("net: tcp: Clean up FIN handling") the
tcp_established() callback now handles TCP connections which are
in various ending/closing states other than TCP_ESTABLISHED.
Currently, these states are generating the following error and not
being processed:
Context 0x123456778 in wrong state 6.
(Shown when TCP is in LAST_ACK state).
This commit also fixes a memory leak issue discribed in
Jira: ZEP-1658
Analysis of the memory leak issue is here:
When TCP connection is established, tcp context is in
NET_TCP_ESTABLISHED state. Once it receives FIN message from client
it goes to NET_TCP_CLOSE_WAIT and then it turns to NET_TCP_LAST_ACK
after connection closing request from server. Now server gets final
ack from client, but tcp_established() will reject it because current
state is not in NET_TCP_ESTABLISHED. Even if server receives proper
ack, it is not handled by server. Hence 'sent_list' is not freed.
Change-Id: I41c8af2e6851809f87a02c271a4290cf3d823ebb
Signed-off-by: Michael Scott <michael.scott@linaro.org>
NET_ASSERT(net_nbuf_iface(buf)) should be called before setting
it on context [net_context_set_iface(context, net_nbuf_iface(buf))].
Change-Id: I9a1da1214857e96e03784bc98a9aae5cf59ef0fc
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using char or uint8_t relevantly.
Jira: ZEP-1723
Change-Id: I512cb6ff4800cd23f6539e7a47c7f3c72dc94183
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interface L2 address type is set at the same time as the
L2 address is set to the network interface. This is most
convinient place to set the address type.
Change-Id: I712d7357d075959eb79df3463141cfbc6d163a74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, for the following MQTT msg fields:
- client_id
- will_topic
- user_name
- topic
their length is computed inside the routine that receives the MQTT msg.
Although this simplifies development, also imposes one restriction:
data must be null-terminated. Sometimes, data is received from other
sources and not generated by the application, so the null-terminated
constraint may be considered problematic for the user.
This patch removes the assumption that string fields are null-terminated.
Current data structures are already prepared to handle this case, so no
API change is required.
Change-Id: I5a147a5b21e0da49541cbe62baac363c8737cd3e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch updates the Remaining Length field from uint16_t to
uint32_t. The MQTT std specifies that this field must be
unsigned 4 bytes length.
Change-Id: I319d0745c673faece4bbd4db29b1bafad78ac199
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The dhcpv4 client code builds ip and udp packets from scratch rather
than using the network stack to do the heavy lifting (why ?).
When it computes the udp checksum of each packet it builds it neglects
to clear any preexisting detritus from the checksum field. The result
of this is that some packets will be built with correct checksums and
some will be built with incorrect checksums.
This is the underlying reason that the dhcp client often taken many
retransmissions and elapsed time before in order to acquire an IP
address.
Change-Id: Iebd1ed34e06f7f2e53d45f6d1555e22f48490287
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Fix long standing issue where a dhcpv4 message type is compared
against a dhcpv4 state machine state name rather than a message type.
The issue probably arizes due to the similarity in names between
messages and states. By accident, the relevant message types and
states happen to share the same numbers, hence the implementation
works, but is ill defined.
Change-Id: I5c028de4336ff42f6696e28b3492c932c58b5a05
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Makes it cleared that zoap_update_from_block() doesn't modify the
packet.
Change-Id: I35429b153370c50eb5ae9c914b47a3144faf2f04
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This fixes the case that a request for block number (NUM) 0, using a
16 byte block was considered invalid.
This was because it is encoded as the value 0 (zero), which can be
expressed as the BLOCK1 option present but without any value
associated. The old code considered this the same as the option not
existing.
Change-Id: I0f3912803a88865e9f544a6d0078ed4231775a88
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Change the handling of iface parameter in net_if_ipv6_maddr_lookup()
function:
* If the *iface is set to NULL, then return the found
interface to the caller.
* If the *iface is not NULL, then use that interface
when doing the lookup.
Change-Id: Ia1f0365170ea9f3e615d189231160614a80d241a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of the change in next commit "net: if: Change
the iface param in net_if_ipv6_maddr_lookup",
we must initialize the network interface to NULL.
Without this the multicast address lookup will fail.
Change-Id: I113b44ce23c5f2ecbbf1698972078f102995e891
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make the IP address parameter const because we are not
modifying the IP address in net_if_ipv6_maddr_add() or
net_if_ipv6_maddr_rm()
Change-Id: I98c19de132e58c386f661e8a76a349d562a82c71
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the function does not change the original data, make
the corresponding parameter const.
Change-Id: I1125a2f9205dc73de2f0aac0c30110591baace1e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implement RFC2131 4.1.1 requirement that at dhcp implementation wait
for a random delay of 1 to 10s before sending the initial DISCOVER.
Implement RF2131 4.1 requirement that at dhcp implementation set the
initial retransmit timeout at 4 seconds and exponentially backoff on
each retransmit.
Change-Id: Id7029f3ed16a5f886dbd555fed87320aeffe31aa
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Rather than reuse XID's on retransmissions, always use a unique XID.
Either behaviour is permitted by rfc2131. Debugging the dhcp client
in the presence of multiple dhcp servers with significant packet loss
in the network is much easier if we don't unnecessarily reuse request
identifiers.
Change-Id: I5c82cbdbf3dfc0ef88cae036aa863946844c144f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
finalize_segment() will call net_ipv4_finalize() or
net_ipv6_finalize(). Both the functions perform net_nbuf_compact().
But after finalize_segment(), net_nbuf_compact() called again, which
is unnecessary.
Change-Id: I9fab63bcc44eec87061a4b55edd5053cf6556a75
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Protocol family is checked in prepare_segment() and in same function
it's again verified by finalize_segment(). So remove the double checking
in finalize_segment().
Change-Id: I17123ab8741d017d7e3ff1ef3fb07371b0d4aa66
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Using net_buf_ref() technically works but debugging the network buffer
allocations is more difficult if done like that.
Change-Id: Iac81bd3ab95547741d49f32763baaa54e97b4877
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If a net context is not connected or listening, we can go ahead and
call net_context_unref() to free it up instead of waiting for
FIN_ACK which will never happen.
Change-Id: Ice06f572df64f2edb5918c10c92087ce0b7b254a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Several error messages are currently being logged as NET_DBG which
requires the user to have CONFIG_SYS_LOG_NET_LEVEL=4.
Let's show these as errors so they are more visible.
Change-Id: I28c9a1aedb78787ef098a9bf565472a437373933
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Current API description of net_nbuf_compact() is not very clear.
The first parameter needs to be the first net_buf in the chain.
The changes to this API are needed in order to clarify following
use cases:
1) User provides fragment that is not first of the chain and compact is
successfully done. In this case there is no free space in fragment list
after the input fragment. But there might be empty space in previous
fragments. So fragment chain is not completely compacted.
2) What if input fragment has been deleted and api returns the same
buf?
So this commit simplifies the API behavior. Now net_nbuf_compact()
expects the first parameter to be either TX or RX net_buf and then it
compacts it. It fails only if the input fragment is a data fragment.
Change-Id: I9e02dfcb6f3f2e2998826522a25ec207850a8056
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The net_nbuf_push() API is not used by anyone. Semantics are not
clear and following patch requires changes to push api, so removing
this API for now. If needed this can be re-introduced later.
Change-Id: I1d669c861590aa9bc80cc1ccb08144bd6020dac5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The ethernet header location was incorrectly calculated
and the result pointer had some random value.
Change-Id: I6b2deee787a78444f3ee3be805d4b82ebb6c3664
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently fragmentation introduces empty fragment in the
beginning of the list, and adds fragmentation header, and moves frags
data to previous fragments. This is done based on condition that max
data should be multiples of 8 bytes and offset is based on before
compression.
It will fail at scenario when current fragment has not enough space
to move from next fragment and next fragment has more than allowable
max bytes. This will cause memory overflow which is typically seen
as double-free error to the user.
This is solved more simple way by this commit. First detach frags list,
prepare new fragment and attach that to buffer. Then move data from
detached frag list and free the fragments in the old one.
Change-Id: I5e3693d47828ff3b92db4ba5f6c00c0b751daadc
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If we are in the end of the fragment chain, then we can just
bail out as there is nothing more to do. There will be a
double free if we continue as the last entry is already
removed at this point.
Change-Id: I0f9782b408244d283dc7e3e087359dd00bada7a9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added a placeholder for CAN (Controller Area Network) support.
Change-Id: Ia6587df71a87f7439691768a04ba7ca07142e72f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Prior to commit df201a0e4b ("net: context: Assign a random port
number when context is created"), TCP clients were assigned a random
port number when the incoming sockaddr parameter's port value was 0.
After the above commit, this is now broken as it will bind to port 0.
If left this way, every TCP client would need to add a line of code
copying the context->local sockaddr_ptr's port value into the
src_sockaddr port prior to calling net_context_bin().
Instead, we can reinstate this behavior in net_context_bind(), by
making sure we only overwrite the randomly assigned port in the
context->local sockaddr if the incoming sockaddr parameter has a
port which is != 0.
Change-Id: I0f27f031f743d50c351ecf9ab55b5282a20ff292
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If we receive a neighbor advertisement, we need to free its
net_buf because we are returning NET_OK to the caller. This
return code means that we consumed the net_buf but we did
not call net_nbuf_unref() in this case.
Change-Id: Ia6d8f1b440be87eff5d2b14a23336a37be6d6a04
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pending buf needs to be freed after it has been sent
to the network. We took the ref when pending buf was saved,
now we need to unref it when it is about to be sent.
Change-Id: I1e429969895700000a8aa124bd645db2d52d036c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Doing it only in net_context, prevented to do it once NS succesfully
finished. This generated an error in 15.4, where pending data had wrong
ll reserve size.
Change-Id: I0f917fb76171457e5dff2c29e44edb8f00662150
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We must use the nexthop instead of destination address
when sending the packet. The current code mixed destination
and nexthop addresses and ignored the nexthop when sending
neighbor solicitation message.
Change-Id: I53887c16ef6fcf8365f1f47ab5792cb208dd273e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Keep track of amount of bytes that are sent or received from
all network interfaces.
Change-Id: I706481aab1a7e0cf2bc78d032f2ef4ebbabe3184
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current behaviour has an issue when UDP context is created with local
port number 0, net_conn_input() happens to treat zero port as
a wildcard ("receive packets for all ports"). net_context_bind()
for a UDP context doesn't affect its existing connection in any way.
Proposed solution is, context should be created with a random free
port assigned and bind() updates connection information from context.
Jira: ZEP-1644
Change-Id: Idb3592b58c831d986763312077b0dcdd95850bc9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The port numbers in the range from 0 to 1023 are the well-known ports
or system ports. Do not allocate them for users.
Change-Id: I4d7b4e1314759e4d8b260669946b9880282642c0
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Commit-ID 83ed3a29be changed the way
fragments are managed after being sent, and this brought a bug in the
active scan logic. Up to active scan to keep the buffer referenced
relevantly now, which is simpler than it used to be.
Reported-by: Johann Fischer <j.fischer@phytec.de>
Change-Id: I23db4bab878328b1ca3cb313e737de819177c281
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds a NET_L2_BLUETOOTH_ZEP1656 which sets NET_IF_POINTOPOINT to
avoid using nbr cache with Linux peers as they send wrong link
addresses.
Jira: ZEP-1656
Change-Id: I842f4cbb99ae9d9c004494739c07189c191929fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This flag can be used by driver to indicate pointopoint links which should
not require destination link address to be resolved.
Jira: ZEP-1656
Change-Id: I58dd3bf48485d6203e75373497e00668317b9825
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The net_nbuf_get*() functions were calling net_buf_alloc()
with K_FOREVER. This can cause issue if called from isr
context. The fix is to check if we are in isr and then try
to alloc net_buf with K_NO_WAIT.
Change-Id: I809170f2cd059480d436763e19a35386d9bdf048
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The returning 'len' was always informing the remaining available space
in that net_buf fragment. This not the expected behaviour for
incoming packets, in this case, we really want the size for the
payload already present in the packet.
When this function is called with a packet without a payload, with
will return the available space in the packet, when the payload is
already set, it will return the size of that payload.
Change-Id: Ia4643b8c2a015ad2316bed037e457b186e420b19
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Channel, PAN-ID, short and extended address
Change-Id: Icdf94dff6f59cd155a072a609290197b37bd084c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Channel, pan-id, short and extended addresses.
Change-Id: Ib63dadac37d649df3efc8fdd67f5312d3a7c8e20
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix setting short address through net mgmt API. It's not about
coordinator's short address, but local one.
Change-Id: I320143e40d336a1085bf12b17a88a2c35da83504
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ORFD or RFD does not matter: the extended address should be set
according to device's MAC address.
Change-Id: I39d09c3a953283eeaa30b908ea159638604bd72b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Delete redundant line and let the common exit point to release
the buffers.
Change-Id: I97e0ef79803083fabd841fb3d38d67c04ff31f7b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Don't try to process null or zero-length buffers generated by
the IP stack. Zero-length buffers are valid at the TCP layer but
contain no information for applications.
Change-Id: If66d301527f56ca8e8761789b7fd6931fc37b8e0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add the malformed callback that will be executed when a message
is received and it does not follow the MQTT v3.1.1 spec.
There is another case when this callback may be executed: when
the IP stack reception buffer's size is not enough to hold an
MQTT message.
The publisher and subscriber parser routines are updated to make
use of this callback. Inline documentation is also updated.
Change-Id: Id1d34336c4322673ca85f2db0b8d432db3c9afa8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
1) Remove some variables pointing to user-provided data.
2) Pass the context structure instead of those variables.
3) Homogenize the use of "ctx" for all the callbacks receiving the
struct mqtt_ctx * pointer.
Now users must use the CONTAINER_OF macro to access data required
by the MQTT callbacks.
Change-Id: I871c0bd8601a67b39187683215579f9ed0087cf9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Although the buffer size validation works as it is inside the
mqtt_linearize_buffer routine, let's move it before getting a
data buffer from the buffer poll.
Change-Id: Id80af8a1e188929769463b04deaef3956b63cd00
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This makes sure ll addresses are properly set before sending reducing the
duplicated code on L2 drivers.
Change-Id: I5330c1d00a344e77555c6f31033ae42af20214bf
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix comparisons in net_if_get_by_index and net_if_get_by_iface:
__net_if_end is not a pointer to a net_if structure.
Change-Id: Ie8e3a457c3f0fa97c080b38b5b7d2b420c50252b
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
There is dead code that is never executed so removing it.
Coverity-CID: 157585
Change-Id: I6926289b5735b78fcb99ad493d1b05198b9e36cc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previous commit: 6e6281af96
"net: tcp: Only return -ETIMEDOUT if timeout>0 in connect"
missed that K_FOREVER needs a semaphore taken, but has a
value of -1.
Change the logic here to timeout!=0 to handle this case.
Change-Id: Iae6a784443810130a7de267226483426fbd4f0d4
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The RFC requires we honor the 2MSL TIME_WAIT timeout, support for
which was just removed with the FIN cleanup. Add it back, but make it
optional (proper sequence number and ephemeral port randomization
makes true collisions a birthday problem in a ~80 bit space!).
Change-Id: I176c6250f43bba0c914da1ee7f0136dcb1008046
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The context may live for a while after the user closes it (c.f. TCP),
and of course the documentation specifies that the user must not use
it after calling net_context_put(). Don't confuse them by invoking
their callbacks on the "closed" connection; it's likely that the user
has destroyed her own tracking data and the user_data pointers would
be garbage.
Change-Id: Iba9cc7025c6ea4a94cc4796903966f8d1b831996
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The connection close paths were a little tangle. The use of separate
callbacks for "active" and "passive" close obscured the fundamentally
symmetric operation of those modes and made it hard to check sequence
numbers for validation (they didn't). Similarly the use of the
official TCP states missed some details we need, like the distinction
between having "queued" a FIN packet for transmission and the state
reached when it's actually transmitted.
Remove the state-specific callbacks (which actually had very little to
do) and just rely on the existing packet queuing and generic sequence
number handling in tcp_established(). A few new state bits in the
net_tcp struct help us track current state in a way that doesn't fall
over the asymmetry of the TCP state diagram. We can also junk the
FIN-specific timer and just use the same retransmit timer we do for
data packets (though long term we should investigate choosing
different timeouts by state).
Change-Id: I09951b848c63fefefce33962ee6cff6a09b4ca50
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
A FIN packet generated by a net_context_put() must go into the normal
transmit queue and not be sent synchronously. Previously sent data is
expected to be delivered and acknowledged before the connection is
terminated.
An advantage we get with this change is unified timeout and retry
handling for FIN packets.
Note that there remains a misfeature here where the queing of the FIN
results in a synchronous switching of the connection callback to
tcp_active_close(), which will prevent any further data received from
being provided to the user.
Change-Id: I2d41316549da9fee383b4f32af5e8b3adf4cb122
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The death of a network context was sort of a mess. There was one
function, net_context_put(), which was used both by the user as a way
to "close" the connection and by the internals to delete it and to
"clean up" a TCP connection at the end of its life.
This has led to repeated gotchas where contexts die before you are
ready for them (one example: when a user callback decides the
transation is complete and calls net_context_put() underneath the
receive callback for the EOF, which then returns and tries to inspect
the now-freed memory inside the TCP internals). I've now stepped into
this mess four times now, and it's time to fix the architecture:
Swap the solitary put() call for a more conventional reference
counting implementation. The put() call now is a pure user API (and
maybe should be renamed "close" or "shutdown"). For compatibility,
it still calls unref() where appropriate (i.e. when the context can be
synchronously deleted) and the FIN processing will still do an unref()
when the FIN packets have been both transmitted and acked. The
context will start with a refcount of 1, and all TCP callbacks made on
it will increment the refcount around the callback to prevent
premature deletion.
Note that this gives the user a "destroy" mechanism for an in-progress
connection that doesn't require a network round trip. That might be
useful in some circumstances.
Change-Id: I44cb355e42941605913b2f84eb14d4eb3c134570
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The old default 2 is too low especially if TCP is enabled.
So in order not to confuse the application developer,
increase the default number of network contexts to 6.
Change-Id: I263bb4b6f31354a11d921d94aa97214abd85ae24
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_addr_ntop() will convert IPv4|6 address to string form.
Renamed existing net_sprint_ip_addr_buf() to net_addr_ntop()
and adjusted parameters as per API.
Jira: ZEP-1638
Change-Id: Ia497be6bf876ca63b120529acbadcfd9162a96e3
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This make sure the link-local address of the destination is added to the
nbr cache as that is accessed when calling net_ipv6_prepare_for_send,
this is needed when following RFC 7668 since link-local addresses are
never registered using nbr discovery.
Change-Id: I2bc578d33d1061726d0cbf46e4464df74d79e992
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
in net_print_statistics for RPL we had:
GET_STAT(rpl.dio..sent)
This wouldn't work or compile, so drop a dot.
Change-Id: Idd6b4dfd5fcae3b90bc977fe3ed301cd813ca87c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Currently, the function accepts a struct sockaddr * but the code
immediately type casts this to either in_addr or in6_addr. This is
incorrect behavior as the first field in a sockaddr is sa_family_t
and not address data.
So without special knowledge, a developer will use a sockaddr structure
as the parameter and then wonder why the address information isn't being
set correctly.
Let's change this parameter to void * which makes this function similar
to inet_pton().
Jira: ZEP-1616
Change-Id: I1fc9368da999d90feb07c03fac55dcc749d4eba6
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If the user supplied connect callback uses too much time, then
it is possible that the connect_wait semaphore will timeout
even if the TCP connection was established correctly. This issue
can be avoided if connect_cb is called after we have released
the connect_wait semaphore.
Change-Id: I175e80f2ad48de657d0d99a44340c5ee1a17364c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make NET_MAX_6LO_CONTEXTS depends on NET_6LO_CONTEXT, otherwise at the
moment even deselecting 6lowpan leaves NET_MAX_6LO_CONTEXTS set.
Change-Id: Iaa34d324005817be05190e203f6899ab89f89e5d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Making NET_IPV6_DAD depends on NET_IPV6_ND instead of default fixes
issue when deselecting NET_IPV6_ND, NET_IPV6_DAD is still selected in
this case.
Change-Id: I633b1a71fb5fdcd7ecc75be80a737d8bda142b2e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
NET_IPV6_ND is always selected by NET_ROUTE which is always selected
for NET_IPV6.
Change-Id: I316838033cccd205b24add6626521bbab5a68715
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This permits to catch issues without the need to enable debug level.
Change-Id: Ic3c66a84be587e955d532cc321161a3ae7b5d69d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is no longer used so it can be removed.
Use CONFIG_NET_IPV6_ND option instead.
Change-Id: Ibaa3d3deb52b8b176e85f8b9e1d8c80c1026aea1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
ll addresses need to be set properly before sending as the stack is not
checking if they are NULL.
Change-Id: Ia4e96240f18b53b0e32e21649a8b571c94260731
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If src and dst link layer addresses are not then 6lo fails
to compress the packet.
Change-Id: Ie2692def49f8a101194e3669dbaec00b557e14ce
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No need to set the status to -ETIMEDOUT in connect callback
if user did not want to have a timeout when doing a TCP connect.
Change-Id: I6d6e565a8d12bcefbcd9de751e789b5e43aad244
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A connection refused needs to be exposed to the user, otherwise the
connection will be stuck as a zombie forever.
This patch also adds a ENOTCONN check in net_context_recv() to match
the one that was already there in net_context_send().
Change-Id: I4f9ae46dd849f68ed97976add7da5daf1932cf55
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The net_context_connect() callback was being invoked synchronously
with the transmission of the SYN packet. That's not very useful, as
it doesn't tell the user anything they can't already figure out from
the return code. Move it to the receipt of the SYNACK instead, so the
app can know that it's time to start transmitting. This matches the
Unix semantics more closely, where connect(2) is a blocking call that
wakes up only when the connection is live.
Change-Id: I11e3cca8572d51bee215274e82667e0917587a0f
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With CONFIG_NET_DEBUG_L2_BLUETOOTH is disabled the code generate the
following warning:
subsys/net/ip/l2/bluetooth.c: In function 'eir_found':
subsys/net/ip/l2/bluetooth.c:301:16: warning: unused variable 'addr' [-Wunused-variable]
bt_addr_le_t *addr = user_data;
^
Change-Id: I1a1ca20c4f2e4fa8aa2a551d2fffa1f86874760e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When checking if the L2CAP channel is connected it is not enough to check
if the conn member is set since the connection may still be pending.
Change-Id: I93a2328943b0ca0e42cdb5c525b30c7cdddd1c18
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use printk(), snprintk() instead of printf() and snprintf().
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf()
will not output anything without it.
Change-Id: I9ad778e318fe999e79ec34182f2de8574e45b7d4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Older default value of 2 is too small for even simple uses, for
example enabling just CONFIG_NETWORKING, CONFIG_NET_IPV4,
CONFIG_NET_SLIP_TAP makes a Zephyr application hang on start up
(apparently, waiting to allocate more buffers). While value of 3
is enough to cover the above options, set new default to 4 to
accommodate configurations with IPv4/IPv6/UDP/TCP enabled.
While the new default slightly increases RAM footprint, it's
apparently better for users who are short of it to optimize it
explicitly, rather than potentially make every Zephyr beginner
wonder why enabling networking breaks applications in non-obvious
way.
Change-Id: I76e83517f0d914ce616a930c3c48ee5c52567b88
Jira: ZEP-1619
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
TCP states are swaped between "server" context and the new connection
context. But in any case the "server" context should loose the
information that makes it able to accept other new connections.
The swap was badly made, as the "server" context was loosing the
accept_cb (!) and the user data pointer. Instead the new connection
context was unrelevantly inheriting those.
Change-Id: Icc877449e1d4c4e59553dcbfd41718c5006edca0
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is useful that the user API can know whether the connection
was established properly or not. So this commit adds status
parameter to connect callback in net_context API.
The call to connect callback needs to be set properly in TCP
code. This commit does not fix the connect callback call which
is not properly done right now in net_context.c.
Change-Id: I284a60ddd658ceef9e65022e96591f467a936a09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Wrong pool pointer was used when printing pool information during
the unref in nbuf.c. During nbuf init, wrong pool pointer was used
when printing memory pool sizes.
Change-Id: I9ed08cf7afa3c841c97ea981b97fff37aa40a984
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parameter "timeout" is set in net_context_connect(), the
assumption by the user is that the function would wait for SYNACK
to be received before returning to the caller.
Currently this is not the case. The timeout parameter is handed
off to net_l2_offload_ip_connect() if CONFIG_NET_L2_OFFLOAD_IP is
defined but never handled in a normal call.
To implement the timeout, let's use a semaphore to wait for
tcp_synack_received() to get a SYNACK before returning from
net_context_connect().
Change-Id: I7565550ed5545e6410b2d99c429367c1fb539970
Signed-off-by: Michael Scott <michael.scott@linaro.org>
net_context is used for more than just TCP contexts. However,
the accept_cb field is only used for TCP. Let's move it from
the generic net_context structure to the TCP specific net_tcp
structure.
Change-Id: If923c7aba1355cf5f91c07a7e7e469d385c7c365
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When SYNACK is received we dont hand off the netbuf to anything
which will call net_nbuf_unref, so let's not mark it NET_OK.
Instead let the code path fall through to mark it NET_DROP.
Change-Id: I1f883e1a13c53c930bf50c07ff701e3db6f02d8a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that the TCP_FIN block is after a potential packet_received()
tcp->send_ack should be appropriately set to the last sequence
processed.
In the case of a TCP_FIN buffer, we should advance it by 1 or else
the destination will continue to retry to send the last block.
Change-Id: I9c97d35a87ad6cc1a50f928b237780bff4cd2877
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Since we default to a return value of NET_DROP, we
can remove the automatic NET_DROP in the TCP_FIN block.
The return value will be set to NET_OK by packet_received()
if appropriate data is found which needs to be sent to
the callback.
Change-Id: Ib2634ba34440ca7053a4e98bf80f12cf6fbbd361
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Buffers marked TCP_FIN may still have data attached to them
which needs to be processed and handed back to the callback.
Let's move the TCP_FIN handling to after the data processing
section now that we have a copy of the TCP flags to do this.
Change-Id: I90f53b10e393024ebffebe1837b8866764b8a7ac
Signed-off-by: Michael Scott <michael.scott@linaro.org>
buffer TCP flags can be cleared during packet_received so let's
save a copy of them for later.
Change-Id: I401e99c1ed2723dac4e86da58635b548a5645c13
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Allow building the IP stack with newlib by enabling linux extensions.
Jira: ZEP-1592
Change-Id: I6714b73c7666a6f56c5203e2754ce1d7d94af0f1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf() will not
output anything without it.
Change-Id: I8013e4efa5cb760215316e9413734281fb576f4d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In some situations, for example, when the remote side sends a RESET
message indicating that it is no longer interested in observing a
resource, it is helpful to have a way to obtain the obverser
representation.
Change-Id: Ifbf627f9170be844fd525c557dda8cb722ac7aff
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When retrieving options that represent an integer, the order of the
bytes being considered was inverted, resulting in invalid values being
returned.
Change-Id: I8ba84f77e3402066632c0ba650939266c87a8ea2
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
For example, when a RESET packet is passed to zoap_handle_request(),
there's nothing it can do, and it's not an error, so it returns
success silently.
Change-Id: I025bb44733521d6132999c219aaa292a3de302d7
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When parser encouter DHCPV4_OPTIONS_END, it immediately returns NET_OK.
No need to maintain end variable here.
Coverity-CID: 157584
Change-Id: I4c8b91f37ae882845c280dab1a8204966aaac00a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Pointer udp will be NULL when (!(CIPHC[0] & NET_6LO_IPHC_NH_1))
condition is true.
Coverity-CID: 157588
Change-Id: I8aa1eb2e4d4aee8039631d76ad0ecc345247d6b5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When contex information provided and DAC bit is not set and vice versa
are invalid cases.
Coverity-CID: 157569
Change-Id: I1b798703cbbb6155a7bdf734d0fcde9ce48c409c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In net_nbuf_get(), check that context pointer value is not
null before accessing data via it.
Coverity-CID: 157600
Change-Id: I7e7ea19a85f6fbef129e9ce699ea740d3be84cb8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If neighbor is not found, then ignore the timeout.
Coverity-CID: 157583
Change-Id: Ia2199970bd862e43901f5717025271c11c74af5e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to allocate separate fragment to store the IP
protocol headers.
Coverity-CID: 157582
Change-Id: Ib0dd5d28cd6876a0cf2de3b063c030ef64da998c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Callback cannot be null so no need to check its value.
Coverity-CID: 157572
Change-Id: I26e4b24c41d30aa9007b78895975035e6bf8807f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The context parameter might be NULL so we need to check
its value before accessing its content.
Coverity-CID: 157571
Change-Id: I7f75323d9d261a77421688f37a40bb44ff3ca2bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The link layer dereferences a buffer right after it is transmitted.
If this extra reference is not held, the second time a buffer is
retransmitted, the reference that TCP holds when keeping the buffer in
the `sent_list` will be taken, and retransmission won't happen reliably
anymore.
As soon as the TCP fragment is acknowledged by the peer, the
`sent_list` reference is taken, and the buffer is freed.
Change-Id: Ie50f9acf02c1dff74248a5dfbec3785a91ff90f7
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
No more than 4 bits are necessary to store the state of a TCP connection,
so better pack it using bitfields so that it uses only 4 bits instead of
32, by sharing space with `retry_timeout_shift` and `flags` fields.
There are 12 (or 14, if you count the 2 unused bits in the `flags`
field) bits remaining in the same dword, but I don't know what to to
stuff there yet.
This also changes all direct field access for the `state` field to
function calls. These functions are provided as `static inline`
functions and they perform only casts, so there's no function call
overhead.
Change-Id: I0197462caa0b71b287c0773ec5cd2dd4101a4766
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This frees up some more memory as well, by computing the maximum segment
size whenever needed. A flag is set in the TCP context to signal if
the value has been already computed.
Change-Id: Idb228d4682540f92b269e3878fcee45cbc28038a
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This value is never set (always zero), so it's safe to remove it from
the net_tcp struct.
Change-Id: Ie4c1d90204a9834f2223b09828af42ee101bd045
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Rename the variable to `retry_timeout_shift`, and shift-right the value
each time there's a timeout. This saves some memory in that structure
by using the holes left due to alignment.
Change-Id: I18f45d00ecc434a588758a8d331921db902f4419
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Cancel all delayed work timers: FIN, ACK, and retry timers. Also, do
that unconditionally regardless of which state the machine is in, as
that's a no-op if the timer has not been started yet.
Change-Id: Ia36b97c6823943976447fbd6389ae04862c19ff9
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The net_tcp struct was being cleaned up and destroyed when the
outbound FIN packet is sent on a connection that already received an
inbound FIN. That's not right, per spec we need to wait for the ACK
(though this would be benign cheating). And worse: there were code
paths which were themselves spec-compliant where the net_tcp struct
(now a NULL pointer) would be used after this spot leading to
occasional crazy behavior on socket close.
Don't do it this way. Clean up the TCP struct at the same time we
destroy the net_context. Much saner that way.
Change-Id: I4bc6b97eb0b71a7fa8faea02c1eb4c4d3bd3ae6d
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The TCP stack inherited msot of the user_data management from UDP, but
it doesn't quite work. It's not possible to have a single pointer in
the general case, as e.g. a net_context_send() call may happen
synchronously underneath a recv callback and clobber the pointer, even
though there will be much more data coming later on the active stream.
Put a recv_user_data field into the TCP struct and use that. Long
term, it would be good to revisit this and come up with a unified
solution that works for both. There is yet another "user_data"
pointer in net_connection that seem likely to overlap too.
Change-Id: Id3a8eca64fc680e0e80b74944c4d621d7810a8fe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Let's drop the lladdr variable and get the link address and
length from the net_linkaddr_storage variable instead.
Change-Id: I75a5d08527cda7df102db897ade9015d39f10caf
Signed-off-by: Michael Scott <michael.scott@linaro.org>
lladdr.addr doesn't point to any storage value when it's
handed off to the net_nbuf_read function. This results
in a write to an undefined area of memory.
Fix this by pointing lladdr.addr to a net_linkaddr_storage
structure's byte storage array which can handle the maximum
specified length.
Change-Id: I05e0a0420b262ba1e5ac95cebe1f0d91f54878ce
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The net_linkaddr_storage structure contains an array of bytes used
to store the link address. This array can be different sizes
depending on the CONFIG options used when building. To facilitate
consistency and error checking let's introduce a new helper function
to copy the addr and len values to this structure.
Also move all uses of memcpy related to net_link_storage structures to
the new helper function.
Change-Id: Ic547d86b07e62e5ac3bc330d4eaeb4508a143200
Signed-off-by: Michael Scott <michael.scott@linaro.org>
- Introduce NET_LINK_ADDR_MAX_LENGTH which is either 6 or 8
depending on whether CONFIG_NET_L2_IEEE802154 is used
- Instead of being a placeholder single index array of uint8_t,
let's use NET_LINK_ADDR_MAX_LENGTH to assign the size of the
"addr" array field in the net_linkaddr_storage structure.
- Now that the "addr" field of net_linkaddr_storage contains the
true size of the link address, we can remove "storage" field
which was hard coded to 8 bytes (2 uint32_t's).
- Fix 2 references to the "storage" field of the net_linkaddr_storage
structure.
Change-Id: I2ea12058280b289f65085964eb7d503d4fd260c2
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Be nice and inform user about unsupported and dropped frames.
Change-Id: Iaf0e7ed660a926c45dac9fc36b788c4c786eac11
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This adds NET_REQUEST_BT_DISCONNECT which can be used to disconnect
IPSP in case it is connected.
Change-Id: I8da00b02ee08611bef5f4c0708936b2d31fd2a93
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_REQUEST_BT_SCAN which can be used to scan peripherals
advertising IPSS UUID.
Change-Id: I2463079d182b4da080e6ef94d883c7c1e24a454c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a shell module called "net_bt" that exposes Bluetooth L2
management commands.
Change-Id: Ia6da1d38cfd51502119758a8f6abbb6d1cd31743
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Connect command can be used to initiate a connection, which in IPSP
terminology refer to a router role.
Change-Id: I12b9428924c88a9c68d3adbfe9016a0dd690aade
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Including logging/sys_log.h before net_core.h prevents SYS_LOG_LEVEL,
etc, to be set properly.
Change-Id: Iaa7aa98110aa455162836be1d9560fbfc03569df
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This decodes the event layer, code and type when debugging is enabled.
Change-Id: I23c6fb200f3287a138e46df9f472c9982898675d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net_context_put() forgot to release the conn_handler field causing
subsequent failures in net_conn_register() when they ran out.
Change-Id: I0d306b5035199422fa8788338ac9da8d1900d5f9
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
TCP didn't actually have a way to signal synchronous receipt of a FIN
packet. Extend the recv_cb API to allow a NULL buf argument with
status==0 (by analogy to Unix's zero-length read) to signal EOF.
Update docs too, and also echo_server which wasn't prepared to handle
this situation.
Change-Id: I7dc08f9e262a81dcad9c670c6471898889f0b05d
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In icmpv4, after calling setup_ipv4_header() function,
only calculate ICMP chksum, not calculate ipv4 header chksum,
ipv4 header chksum still 0, the other side will drop this pack.
Change-Id: I1550a4c8c7ab63132d70ba6ce19a7caf78ad84e6
Signed-off-by: li zj <279939902@qq.com>
When router receive dhcpv4 request with ciaddr not 0.0.0.0,
some router reply NAK, dhcpv4 never successful.
Change-Id: I4b66b18f7d30ad5a1b638fdca0bb204ed078d551
Signed-off-by: li zj <279939902@qq.com>
The tcp_synack_received() function ends with a call to send_ack().
However, if we don't update the sequence and ACK values, we'll send back
headers with 0 values and the destination will try resending over and
over.
Fix this by saving the seq and ack values when a TCP_SYN is flagged
in the header (which should be the case almost any time this function
is used as a callback).
Change-Id: I57f07ce719f2b6e2fb34c96c867d2e1c37f342ba
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Once SYNACK has been received for a TCP connection, we need to set the
net context state to NET_CONTEXT_CONNECTED or else calls to sendto()
will fail with -ENOTCONN.
Change-Id: Idd78e1dcdd5ac0bca5d3fba40b59ab8fde6b8729
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When calling net_context_connect, the local address family
is never set prior to calling net_tcp_register. This generates
an error:
"Local address family not set." (-EINVAL)
Let's set the local address family prior to this call.
Change-Id: Ic5f2edf684d14f9bb77019c49c95e5524a406417
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When TCP SYNACK is received we register the connection via the
net_tcp_register function. During this call several errors are
generated concerning local and remote address information not
being set.
Let's copy the local and remote address data prior to this call.
Change-Id: I17cd83f7b4b7e65e45fec1810fb38f745653bdc7
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In other portions of the code we use the sys_put_be* function
to shift the values from the current system endian to big
endian array of bytes. Let's be consistent and do that in
the prepare_segment function as well.
Change-Id: I5a1a4c30ddf313c9e978be98fd969899f5de6190
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The NET_SLIP Kconfig choice option doesn't really do anything for us,
plus we get warnings related to setting CONFIG_NET_SLIP=y in prj.conf
files.
Warnings like:
warning: override: reassigning to symbol NET_SLIP
warning: override: NET_SLIP_TAP changes choice state
So remove NET_SLIP choice and remove CONFIG_NET_SLIP=y in the prj.conf
files.
Change-Id: Ibccf9cf167f4c8a4df480ca0396bf83fcf60df1e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In commit bf4fb51f44, "net: if: Add NET_IF_UP flag"
a reference to ctxt->iface was added in the ipsp_disconnected function.
Let's add the ctxt variable definition to fix the build break.
Change-Id: Ib06047e333504f3db4fe175fb3ef1dce347e1916
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If the length of all fragments is used instead, the TCP header is also
considered; sequence numbers do not consider the header.
Change-Id: I19e77ac0fe62ca619b0903dd0265f8ea4878cdf7
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The net_buf_frags_len() function returns a size_t, which is an unsigned
integer. Store on an appropriate size_t variable instead.
Change-Id: I98aa4c0ddd7c464737436aa9ce13bdc86c11da2b
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
TCP packets need the computed packet length early so they can fill in
a correct sequence number in their generated ACKs. Waiting for
packet_received() is too late. Precompute it before needed, and skip
the evaluation later.
Change-Id: I25547009f88277e0042c74f2005a141819797886
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
On accepting a new connection, the stack does an odd "swap" trick
where it updates the struct net_tcp record on the *listening* context
with the values from the new connection, and then swaps it with the
empty one that got allocated for the *new* context.
Unfortunately this swap forgot to swap the net_tcp "context" field
backpointers, so the net_context retrieved at runtime was for the
wrong connection. Surprisingly, this actually almost worked for a
long time, except that the destination address would be wrong in the
newer setup.
Change-Id: I0c1812ddb9f9ff3e7deb60d1fd67cafd9ba96997
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The source address for a TCP SYNACK must (obviously) be the same as
the destination address of the SYN that produced it. But the existing
IP packet creation routines would simply fill in a default address
from the net_context struct, which is correct for *established*
connections, but for the listening socket is generally INADDR_ANY
(i.e. all zeroes) and will result in an arbitrary choice for source
address (e.g. a link-local address on the same interface) which can
easily be wrong.
So we need to pass the correct address all the way down from the SYN
packet handler code through the net_ipv*_create() packet creation
functions. This requires lots of API plumbing, but relatively little
logic change.
Change-Id: Ic368f8cef6689f8a27cbafd5933a4964d5cc457e
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This one exposes IEEE 802.15.4 net mgmt requests through the shell. User
has then the ability to directly make relevant requests like raising a
scan, associating, etc...
For now, it assumes the 15.4 interface is the only one on the system and
thus will rely on net_if_get_default().
Change-Id: I8eb20565b8231e6cfcba6c1479179cc85ff1d8e5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is then possible to set the channel, pan_id and short address through
this API. Such features are mainly useful for testing purposes.
Change-Id: I41aeb397afdb231458a3b13638f3e13d3ac28a6c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When a CNAME is part of the DNS answer RR, sometimes a label with
a pointer is found. The CNAME must be reused to create a new DNS
query and that CNAME will become the new DNS Query QNAME. This new
QNAME must not include pointers.
This patch introduces the qname_copy routine that "linearizes" a
given QNAME (perhaps with pointers).
The dns_read routine is also updated to reflect these changes.
Change-Id: I8e8f64e85e2cbf494fd589e2b7a67d470d34604b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the mqtt_subscriber_parser routine and modifies the
mqtt_init routine to allow an MQTT subscriber app to receive MQTT msgs.
Change-Id: Ie54ab892dacbc4386acab78a8991eba1850d8171
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Changes applied by this patch:
- Add the mqtt_publisher_parser routine
- Add the MQTT_PACKET_TYPE macro to get the MQTT msg packet type
(required by mqtt_publisher_parser)
- Add the mqtt_linearize_buffer (required by mqtt_publisher_parser)
- Add the mqtt_recv callback for reception
- Modify the mqtt_init routine to install the reception callback
The mqtt_publisher_parser routine is a callback used internally
to execute the appropriate mqtt_rx routine. Only the following
messages are handled by this routine:
MQTT_CONNACK, MQTT_PUBACK, MQTT_PUBREC, MQTT_PUBCOMP and MQTT_PINGRESP.
On error, it executes the ctx->malformed cb, if defined.
This commit also introduces the mqtt_linearize_buffer routine that
will be used to linearize an IP stack fragmented buffer. This patch
makes use of the net_nbuf_linear_copy routine to linearize the
incoming buffer. mqtt_rx_xxxx routines are also updated to handle
linear buffers (no fragmentation).
Currently, all the network protocol routines assume that the input
buffer is not fragmented. Future versions will remove that assumption
and the mqtt_linearize_buffer routine will be removed as well.
Public MQTT API is not affected by this patch.
Change-Id: I02fece67052ffbc7cb393d5ca545c503da463c4b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Avoid undesired behaviors by exiting once an error is detected.
Change-Id: Id8e6accd6cd096274fe1c40a615d290967f1d4b9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit improves the buffer error handling in the mqtt_tx
routines.
Change-Id: Ic8e5761d927fe881b2376b6ac948a412e3b1168a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The mqtt_rx_publish is used to process incoming MQTT PUBLISH
messages. This routine performes the following steps:
- take ownership of the rx buffer containing the MQTT PUBLISH msg,
- call the MQTT parser routine, and
- determine, based on the incoming message's MQTT QoS,
the next action.
Change-Id: I3cc011cf0c280205161d0484f12a2cfa79fdf44a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the appropriate data type for some variables:
- const input arguments
- int32_t instead of uint32_t for timeout
- uint8_t instead of int for variables that take just a few
possitive values.
Change-Id: Id7d762b400fa17e6751829ac401cd7c13aabb7b2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit changes some function signatures found at the private
MQTT Packet Lib. Input arguments representing arrays can be considered
'const', avoiding compiler warnings when passing "const arrays" in
MQTT applications.
Change-Id: I3ebaa9c7ff5fba74324bf79c55027cdd82669eaa
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds one routine previously found at the DNS resolver
library. The net_nbuf_linear_copy routine allows to "linearize"
an IP stack network buffer. This routine is required by functions
that must jump between big chunks of data that in this case may
lie between many fragments. Tracking fragments may be a tedious
task, so getting a linear copy of the buffer will reduce code
complexity altough it increases memory consumption.
The DNS client library is updated to reflect these changes.
Change-Id: Iae321f99fa9b05fae7e722b6d41baac427d82d7e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
PAN coordinator can decide to eject a client device from the PAN by
disassocating it.
Change-Id: Ia868554d40a7aceb4c75a0b426db45f56003fbb7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If associated, this will request to disassociate from the PAN. That's
only client side, PAN coordinator can also disassociate a client, which
case is not handled here.
Change-Id: If308f51b62c5006b4a2db53d0c891e8192f3c198
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Active scan differs from passive scan by sending a Beacon request (thus
the "active" part) and wait for beacons in reply to it.
Taking the opportunity to add debugging output to scanning logic.
Change-Id: I85001b1ea17f4ec4cd315dc39524c4d8f053cee2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now we can handle incoming MAC command frames.
Association result ONLY for now.
Change-Id: Ib54b1757185ed079fe6914fa7939347020e006d9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such management request will enable association the 15.4 device to an
existing PAN.
Change-Id: I61ffd5e4d8192716e067c5225b3327f08944063b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is used only for scanning at this point. But will be needed to get
slots information and else in the future.
Change-Id: Ib917469134c6ba5a54485847c612d3755f62ed35
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, as only CC2520 device is supported: it will loop over the 16
channels present in 2.4Ghz spectrum. However, this will need refinement
as soon as other spectrums will be in use: L2 layer could request
capabilites from the device in order to know which range to use.
Scan result is done one at a time for now. It's unlikely going to fit
all production use case, so it's going to change in the future.
Change-Id: I2fafec49eb5cbfca1a4f04107ba3b6511d7d956d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It can be thus used to track the status of network interfaces in order
to act accordingly (no need to try sending things on network if the
interface is down for instance).
Change-Id: Ie160ef0dfdad6679d531d05a7abada96ad1de7db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds enable callback which can be used to notify the L2 driver about
changes of interface state, the L2 driver can then check if the new state
is allowed and reject otherwise.
Change-Id: I4bb6b1e32be2633f24694c0246585f803f8c645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_IF_UP flag support indicating the interface is up,
currently this shall only be used internally by the driver, later on it
shall be possible to make it public by using dedicated functions.
Change-Id: I38090da4030395b2341733b846004789416d61c1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
And it's not really a debugging option either, one might want to use it
for the features it brings. Thus moving it out of Kconfig.debug.
Change-Id: Ie1e2d2bcba94ad4b8354d3cc56087227184039b6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's possible to know from which pool the nbuf comes from so
let's reduce nbuf size by removing its internal type attribute which
becomes then useless.
When a data buffer is not coming from nbuf data buffer pool, let's call
it "EXTERNAL", just to make debugging handling a little simple in the
code.
Change-Id: I6931394c8c4f594137f6380be0a0ba5cea371040
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the interface function rather than writing directly to the iface
structure. Check for errors in nbuf read.
Change-Id: I75311755c2060b640325962ada28adea597cb914
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Detect non local IPv4 destination addresses earlier and route them via
the gw address. Ensure that the ARP table is populated with the GW
address rather than the final destination address.
Jira: ZEP-1473
Change-Id: I3b628584148b760340ef0fea4da4e8893702c832
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
s/energy_est/estimation when using net_rpl_node_energy_object.
Change-Id: I4b326a0dbbca11d48de0c595dfe843495fe10e04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's much different than IPv4 where it's possible to find the whole
packet length. Here it has to count also the ipv6 header size by itself.
Jira: ZEP-1422
Change-Id: I84b1602ac75ef81b9ceda7898ca9dedf2e54d633
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
User application can request the information it wants via the generic
net_mgmt() call, following the NET_REQUEST_STATS_* codes.
Change-Id: Ia9e7d318cf11b7bf8bfaf1ad63c8c985be846cc1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's change from macros to inlined function to make things nicer.
Change-Id: Ie98e0667613961b03c84ca60bc551d0f473765f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This file will own more statistics handling in a near future.
Change-Id: Ifaf86852f5c7166e6878b5dc8f4cd4c166dbee90
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It clutters a bit the code with ifdefs but it's quite useful when
debugging.
Change-Id: I4f6899d052921b8ef8a7ec2f6e7df927a1bca2f1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
printk is anyway the routine being selected for sys_log.
Change-Id: Id6b516aa6ab8d4d420b9afe22b5e6b832dd3e216
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A very common pattern in code goes something like the following:
memcpy(net_buf_add(buf, len), data, len);
To avoid having to create this kind of complex constructions every
time, this patch adds a new API which simplifies the call:
net_buf_add_mem(buf, data, len);
Change-Id: Ic1aeae4baf88b2295d139f672d5d265db2ddbe7b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use size_t instead of int to avoid compiler warnings.
Change-Id: I86f804010a7bd0387299648f8c2c0f880f19f580
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds the ARG_UNUSED macros to some function arguments
to avoid compiler warnings.
Change-Id: Iae2cd3018c9442ffa9268fdfd33eb9a21f55087c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After commit 71c7c01819 about buf pool, we
started to get spurious behaviors on various places of the code on
different boards (a101, frdm...) BUT on qemu. Basically, outgoing ip/udp
packets were full of garbage. Or sometimes it was the abilitty to parse
incoming packet that was happening.
The difference between qemu and actualy boards is - afaik, at least, let
me know if I am wrong - that qemu provide initialized memory (full of
0s). Following this asssumption, this patch just reset the nbuf right
after it got allocated. And all started to work again as thought.
It's in fact a good thing to reset nbuf memory. Even before the above
commit: after being used more than once, a buffer would have ended up
with old content, and this could have been generating a bug. So let's be
on the safe side and always intialize nbuf content.
Change-Id: I50647d9e9b82a4ed340a5ceb0d69409b0194dddd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Minimal frame size is 60 bytes, but IP frame might be smaller than this
size minus the ethernet header. In that case, Ethernet frames are padded
so it does reach this minimal size. In this case, ethernet L2 should
update the buffer list so it remove the padding length from the whole.
Change-Id: Id370cad09ad82bb54febeb60b05f7e430cc8f963
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_buf_put already awakes the RX thread so k_wakeup is not necessary.
Change-Id: I18b5aef5d6e85a9461bc01c17f56c3d4d9a13824
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Validate the return code of net_context_put and add debug information
in case any error is detected.
This patch fixes the error reported by Coverity:
Error handling issues (CHECKED_RETURN)
Calling "net_context_put" without checking return value
(as is done elsewhere 4 out of 5 times).
Coverity-CID: 157833
Change-Id: Ia4a87cc08094bee465c8828411d7c1311481695a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Following commit fc21a76db6
Some more fixes are needed.
Change-Id: I19c2c979d44be5edfd76041d3cf4507860795c78
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using a LIFO instead of a FIFO has the potential benefit that more
recently in-use buffers may be "cache-hot" and therefore accessed
faster than least recently used (which is what we get with a FIFO).
Change-Id: I59bb083ca2e00d0d404406540f7db216742a27cf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the user data size is now stored in the pool there's very little
value in storing it as well per-buffer.
Change-Id: I17a99123b232423c52a2179b4eccd813728d51b1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is only for use with custom destroy callbacks, so that the
application gets isolated away from the details of how exactly the
buffers are managed. This opens up the possibility of switching away
from k_fifo to potentially better solutions, such as k_lifo.
Change-Id: I0d8322fdec3500d8ae060ae471b9448aeaa4572a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
That bug never got caught because the buffer in unit test is always
clean and fully initialized to 0, and that part of the code being
tested is never used in real as the ACK reply is directly made by the
chip.
Change-Id: I88c4dd3767b4addf2250165b94f49fae29d322ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The CONFIG_TEST_RANDOM_GENERATOR parameter is not intended for
production use. Switch to CONFIG_RANDOM_GENERATOR.
Change-Id: Id6ce986259270455223ce6a42d19a3d9c9b1e642
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: Iab7cc6da110e9c98720211a6f773dcf055a3a411
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Structures attribute need to be ordered according to endianness.
Change-Id: Ib3053728cbc49e54631057c779aba0f16aace283
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
