Reworking the ARM NVIC binding and cleaning it up. Towards this
introduce a new compatibility for this new binding. So we rename
arm,armv{6,7}-nvic to arm,v{6,7}-nvic (for new binding). We also just
use the bit more generic arm,nvic in device tree files.
Change-Id: I5a2c45313ed94619d9268f2c035dacbc8acded29
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move back to getting the number of IRQs from Kconfig. We do this
because the number of IRQs should really just be determined by scanning
the device tree and figuring out the highest IRQ value used.
Change-Id: I8e0dbec1d9d036d4e899b237c4dc7d833c422e18
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than having a zephyr specific property we will encode the IRQ
priority as part of the interrupt property for ARM NVIC based interrupt
controllers.
Change-Id: I7d1489f0bffa7a6369f0622f748bb70dc83fa0cd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update Cube version for STM32F4XX family
from version: V1.14.0
to version: V1.15.0
Add support for Low Level API on stm32f4 familly
Change-Id: I459b61f011ffbc2cc265f58cd3f0be8b77155fc2
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F7XX family
from version: V1.4.0
to version: V1.6.0
Add support for Low Level API on stm32f7 familly
Change-Id: Iabe18f952d2cf0847bd72ce9d894d4c0cbd4c0f9
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Removes unused k20 and k6x header files that defined peripheral
registers now covered by CMSIS.
Change-Id: Ib11b19a290c6cc4b83f1b67455145fe2b86210c8
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds mcux 2.2 drivers and device header files for the kl25z. Updates
several drivers that were already imported for the kw41z but also apply
to kl25z.
Origin: NXP MCUXpresso SDK 2.2
URL: mcux.nxp.com
Maintained-by: External
Change-Id: Ifc9d70b79f25d8ba0c595a7ceb5881ff2fc0fbf7
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ie5ff404ac23621dbcf6ca61734ed6f72832c1ce2
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ib2d9b1cc4144bd84b1b89691a80dffd99212289d
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I37c654fb0bb7ebdf288af01e41ce5497969f8968
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I46cd75d714449de806a85dde08756c8e190488dc
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I57d65a8888f78aa61d776f607a5db86bdb35726c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ide66f75ca8fac0d5f65fbfc50dc9d130cf45b392
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the supported features list for Bluetooth.
Change-Id: I25f029106852794bcae1163ce1a1162d78c68d24
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The LEDs on BBC micro:bit boards are red and not green. Since
mentioning the color doesn't really provide any value to the GPIO pin
definitions, just remove it.
Change-Id: I7f53e0d8a0733cda911a624d0b53c750eacfa685
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Docs need a label at the top so we can use :ref:`labelname` to
create a link to that doc from other docs.
Change-Id: I7d7b98f3a9d22350ca983b3558bf83f77fd6e379
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
_THREAD_TIMEOUT_INIT() has been replaced by _nano_timeout_thread_init(),
so it can be removed.
_THREAD_ERRNO_INIT() is defined, but never used. Ben suspects that this
is a bug, and that there should be some code that calls it.
Jira: ZEP-1326
Change-Id: I476c316b80e9f34d1ed61971229ed9afafc80d8a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new mb_display_print() API which takes printf-style parameters
and outputs scrolling text instead of one character at a time. The
existing mb_display_str() API is renamed to mb_display_string() for
consistency, and now also takes printf-style parameters.
Change-Id: I59c42bcd74c62f05ecb6d097dc808b9e5c1984c5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds a simple driver to access the 5x5 LED display found on BBC
micro:bit boards. The display is so limited that no effort is done to
try to integrate with the existing console (which would likely make
the display unusable). Instead, dedicated mb_display_* APIs are added
that are specific to this display.
References:
https://www.microbit.co.uk/device/screenhttps://lancaster-university.github.io/microbit-docs/ubit/display/
Jira: ZEP-1990
Change-Id: I431b5b358b5f07592a60d3aed87eaab6ac20ce25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
fibers/tasks are now just threads and we should not be using
struct *tcs any more.
Change-Id: Iee5369abcc66b4357a0c75537025fe8edb0ffbb4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The SiFive Freedom E310 Platform Level Interrupt Controller (PLIC) follows
the riscv PLIC specification as defined in the riscv privilege
architecture specification.
It provides implementation for the riscv PLIC APIs as
required by the riscv-privilege SOC Family for SOCs providing
support for the RISCV_HAS_PLIC config.
Change-Id: I95d02edb53deeccd91e490776e8e1dbfb82d235f
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The SiFive Freedom E310 SOC follows the riscv privilege
architecture specification and hence is declared within
the riscv privilege SOC family.
It also provides support for a riscv
Platform Level Interrupt Controller (PLIC)
Change-Id: I19ff0997eacc248f48444fc96566a105c6c02663
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Rearming the riscv machine timer is done by first updating the
mtimecmp low value register. If the low value is updated with a
relatively small value, a timer interrupt can be generated while
updating the mtimecmp high value.
To avoid such a spurious interrupt to occur, disable the timer
interrupt while rearming the timer.
Change-Id: I50ab3f19554a9a8dfe70943b6da0d20be3de88dc
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
If that's not done and user forgets that they still have TAP interface
active, it may lead to all kinds of address conflicts and routing
problems.
Change-Id: Ib7b64d5e7fcaf2695ff6693a0f0513d16b8907ad
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This change introduces console_getchar() and console_getline() API
calls which can be used to get pending console input (either one
char or whole line), or block waiting for one. In this regard, they
are similar to well-known ANSI C function getchar/gets/fgets, and
are intended to ease porting of existing applications to Zephyr, and
indeed, these functions (shaped as an external module) are already
used by few applications.
The implementation of the functions is structured as a new "console"
subsystem. The intention is that further generic console code may be
pulled there instead of being in drivers/console/. Besides the
functions themselves, initialization code and sample applications
are included.
At this time, there're may limitations of how these functions can
be used. For example, console_getchar() and console_getline() are
mutually exclusive, and both are incompatible with callback
(push-style) console API (and e.g. with console shell subsystem
which uses this API). Again, the intention is to make a first step
towards refactoring console subsystem to allow more flexible
real-world usage, better reusability and composability.
Change-Id: I3f4015bb5b26e0656f82f428b11ba30e980d25a0
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This enables casting if necessary.
Change-Id: I69d537dd1082e1e5a05aa2cacdd503d3f6c1ab95
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds SYS_SLIST_PEEK_TAIL_CONTAINER macro to access the container
directly.
Change-Id: I740138a47936ebda1e0090628f4933e921f6a43b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These were flagged by icx build.
Jira: ZEP-1887
Change-Id: Iaeedb13be23e86ebfb29a6441574b7384ae836e1
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Provide a BUILD_ASSERT and BUILD_ASSERT_MSG that are based on
_Static_assert when that's available, as its output is easier to read.
Change-Id: Ifa96d5073b1341cab2a90e4dcd04752ee80c69bb
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Like BUILD_ASSERT(), but with a message to emit on failure.
The base implementation swallows the message; compiler headers can
override it when they can do better.
Change-Id: Ib724e48554da77a51afa01468b1d5b7806f9de6b
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.
Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The pipeline that converts scripts_path from "C:\" style to "/c/"
style is only needed on Windows. Further, on Linux, it prepends an
extra "/" to what gets added to PATH, since the pwd output already has
a leading "/".
Fix that by only making the change when we're building on Windows.
Change-Id: Ied7e4491f171d82e8dee4c3a4dfdcf64adf46efd
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
It needs to check if current event matches:
- cb's layer
- cb's layer code
- cb's command
If none match, it will not raise the event.
Fixing the unit test as layer must be always != 0.
Jira: ZEP-1940
Change-Id: Iadd63e751fa6e534a10e7da9cae0f5bb5a384461
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These structs are not mapped to network data, and allocated on stack.
Change-Id: Ib00e15c3d0cdb21fd124ef6f61ec010100bcc9bf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>