michaelh/zephyr
1
0
Fork 0
Code Releases Activity

scripts: openocd.sh: align usage of OPENOCD_*_CMD variables

Browse source 
OPENOCD_PRE_CMD, OPENOCD_POST_CMD variables require adding
'-c' in front of an actual OpenOCD command. This is in contrary
to other OPENOCD_*_CMD varialbles which specify OpenOCD commands
directly. This patch aligns usage of various OPENOCD_*_CMD variables.
It is no longer required to add '-c' in front of OPENOCD_PRE_CMD,
OPENOCD_POST_CMD variables.

Change-Id: I276fab00b099694c83c3bf74aa5dd59c8d6a308b
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit is contained in:
Piotr Mienkowski 2017-03-31 15:12:59 +02:00 • committed by Anas Nashif
commit ce6ad70c06
8 changed files with 9 additions and 9 deletions
Download patch file Download diff file Expand all files Collapse all files

2
boards/arc/arduino_101_sss/Makefile.board
View file

@ -9,7 +9,7 @@ FLASH_SCRIPT = openocd.sh
endif
DEBUG_SCRIPT = openocd.sh
OPENOCD_PRE_CMD = "-c targets 1"
OPENOCD_PRE_CMD = "targets 1"
OPENOCD_LOAD_CMD = "load_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_FLASH_BASE_ADDRESS)"
OPENOCD_VERIFY_CMD = "verify_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_FLASH_BASE_ADDRESS)"

2
boards/arc/em_starterkit/Makefile.board
View file

@ -6,7 +6,7 @@
#FLASH_SCRIPT = openocd.sh
# ^^ Keep FLASH_SCRIPT undefined for now since flashing a self-boot image
# is not yet supported by Zephyr Makefile.
OPENOCD_PRE_CMD = "-c targets 1"
OPENOCD_PRE_CMD = "targets 1"
OPENOCD_LOAD_CMD = "load_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_ICCM_BASE_ADDRESS)"
OPENOCD_VERIFY_CMD = "verify_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_ICCM_BASE_ADDRESS)"

2
boards/arc/panther_ss/Makefile.board
View file

@ -1,6 +1,6 @@
FLASH_SCRIPT = openocd.sh
DEBUG_SCRIPT = openocd.sh
OPENOCD_PRE_CMD = "-c targets 1"
OPENOCD_PRE_CMD = "targets 1"
OPENOCD_LOAD_CMD = "load_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_FLASH_BASE_ADDRESS)"
OPENOCD_VERIFY_CMD = "verify_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_FLASH_BASE_ADDRESS)"

2
boards/arc/quark_se_c1000_ss_devboard/Makefile.board
View file

@ -1,6 +1,6 @@
FLASH_SCRIPT = openocd.sh
DEBUG_SCRIPT = openocd.sh
OPENOCD_PRE_CMD = "-c targets 1"
OPENOCD_PRE_CMD = "targets 1"
OPENOCD_LOAD_CMD = "load_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_FLASH_BASE_ADDRESS)"
OPENOCD_VERIFY_CMD = "verify_image ${O}/${KERNEL_BIN_NAME} $(CONFIG_FLASH_BASE_ADDRESS)"

2
boards/x86/arduino_101/Makefile.board
View file

@ -8,7 +8,7 @@ else
FLASH_SCRIPT = openocd.sh
endif
DEBUG_SCRIPT = openocd.sh
OPENOCD_PRE_CMD = "-c targets 1"
OPENOCD_PRE_CMD = "targets 1"
OPENOCD_LOAD_CMD = "load_image ${O}/${KERNEL_BIN_NAME} ${CONFIG_PHYS_LOAD_ADDR}"
OPENOCD_VERIFY_CMD = "verify_image ${O}/${KERNEL_BIN_NAME} ${CONFIG_PHYS_LOAD_ADDR}"

2
boards/x86/panther/Makefile.board
View file

@ -1,6 +1,6 @@
FLASH_SCRIPT = openocd.sh
DEBUG_SCRIPT = openocd.sh
OPENOCD_PRE_CMD = "-c targets 1"
OPENOCD_PRE_CMD = "targets 1"
OPENOCD_LOAD_CMD = "load_image ${O}/${KERNEL_BIN_NAME} ${CONFIG_PHYS_LOAD_ADDR}"
OPENOCD_VERIFY_CMD = "verify_image ${O}/${KERNEL_BIN_NAME} ${CONFIG_PHYS_LOAD_ADDR}"

2
boards/x86/quark_se_c1000_devboard/Makefile.board
View file

@ -1,6 +1,6 @@
FLASH_SCRIPT = openocd.sh
DEBUG_SCRIPT = openocd.sh
OPENOCD_PRE_CMD = "-c targets 1"
OPENOCD_PRE_CMD = "targets 1"
OPENOCD_LOAD_CMD = "load_image ${O}/${KERNEL_BIN_NAME} ${CONFIG_PHYS_LOAD_ADDR}"
OPENOCD_VERIFY_CMD = "verify_image ${O}/${KERNEL_BIN_NAME} ${CONFIG_PHYS_LOAD_ADDR}"

4
scripts/support/openocd.sh
View file

@ -35,12 +35,12 @@ do_flash() {
sh -c "${OPENOCD_CMD} -f '${OPENOCD_CONFIG}' \
-c 'init' \
-c 'targets' \
${OPENOCD_PRE_CMD} \
${OPENOCD_PRE_CMD:+-c $OPENOCD_PRE_CMD} \
-c 'reset halt' \
-c ${OPENOCD_LOAD_CMD} \
-c 'reset halt' \
-c ${OPENOCD_VERIFY_CMD} \
${OPENOCD_POST_CMD} \
${OPENOCD_POST_CMD:+-c $OPENOCD_POST_CMD} \
-c 'reset run' \
-c 'shutdown'"
echo 'Done flashing'