This commit adds a ISO-TP (ISO15765-2) library.
The library makes use of net buffers and spawns a workqueue thread.
The CAN device that is passed to bind and send can be used concurrently
beside this library.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
There were two dereference after NULL check and logical dead code.
Fixes#22434Fixes#22443Fixes#22435
Coverity-CID: 207978
Coverity-CID: 207977
Coverity-CID: 207964
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
This makes simulate command advertise with proper UUID so the likes of
central_hr can connect to it when simulating:
hrs simulate on
Registering HRS Service
Connected: 00:aa:01:01:00:24 (public)
Start HRS simulation
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Kconfig option TRACING_TEST which can be used to
customize tracing packet format (currently supporting
string format and data format) for testing purpose.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add TRACING_ISR Kconfig to help high latency backend working well.
Currently the ISR tracing hook function is put at the begining and
ending of ISR wrapper, when there is ISR needed in the tracing path
(especially tracing backend), it will cause tracing buffer easily
be exhausted if async tracing method enabled. Also it will increase
system latency if all the ISRs are traced. So add TRACING_ISR to
enable/disable ISR tracing here. Later a filter out mechanism based
on irq number will be added.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add script for usb backend to receive tracing stream data. This
script, trace_capture_usb.py, is based on pyusb, so install it
correctly before using the script.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add script to capture tracing stream data with UART backend. This
script is developed based on pyserial, so install it correctly
before using the script.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
First, this commit adds user interface in tracing_format.h which
can trace both string format and data format packet.
Second, it adds method both for asynchronous and synchronous way.
For asynchronous method, tracing packet will be buffered in tracing
buffer first, tracing thread will output the stream data with the
help of tracing backend when tracing thread get scheduled.
Third, it adds UART and USB tracing backend for asynchronous
tracing method, and adds POSIX tracing backend for synchronous
tracing way.
Also it can receive command from host to dynamically enable and
disable tracing to have host capture tracing data conveniently.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Since we do interger division to determine how many items are in each
set, its possible we can have bad rounding error and the last set having
a much larger amount of items compared to all other sets.
For example, total = 3740, sets = 300:
per_set = 3740 / 300 = 12.466 = 12
last_set = 3740 - 299 * 12 = 152
So instead of doing simple division, we add on extra item to the early
sets and we've exhausted the rounding error:
num_extra_sets = total - per_set * sets
140 = 3740 - 12 * 300
So the first 140 subsets will have 13 per_set, and the last 160 will
have 12 per_set.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When is NET_SOCKETS_SOCKOPT_TLS set, it should set TLS_CREDENTIALS
even when NET_NATIVE=n, so that platforms that use socket offloading
can continue to set TLS credentials.
We are now setting this via 'imply' instead of 'select', so that
prj.conf can opt out if necessary.
Fixes#22390
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit fixes an incorrect declaration of the buffer_size member
of the i2c_eeprom_slave_config struct.
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
Fix the following device tree warnings:
unit-address and first reg (0x20000) don't match for iccm@0
unit-address and first reg (0x80010000) don't match for dccm@80000000
Since the em_starterkit_em7d_normal has a different base address for
iccm & dccm, and most of the em_starterkit variants have different sizes
for iccm & dccm. Just define the nodes in the specific
em_starterkit*.dts file and remove them from emsk.dtsi. This removes
the issue reported in the warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix the following device tree warnings:
unit-address and first reg (0x40000) don't match for iccm@0
unit-address and first reg (0x80040000) don't match for dccm@80000000
Re-work iccm and dccm reg address and size to be based on #defines.
This allows the nsim_sem_normal.dts to override defaults that are set in
nsim.dtsi. Utilize DT_ADDR macro to take a 'unit-address' still value
and convert it into a hex value (just prepending 0x).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since there are times that we include a base .dtsi file and change the
reg address we tend to end up with warnings that the reg address and
unit-address don't match. To handle this introduce a simple DT_ADDR(x)
macro that will prepend '0x' to a 'unit-address' style address.
#define DCCM_ADDR 80000000 /* in unit-address format */
dccm0: dccm@DCCM_ADDR {
reg = <DT_ADDR(DCCM_ADDR) 0x1>;
...
};
This allows the dts file to override the value of DCCM_ADDR and than to
have the unit-address of the node and the reg address match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix warnings of the following form:
unit-address and first reg (0x30000) don't match for partition@10000
unit-address and first reg (0x200000) don't match for partition@1F0000
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Reduce the default timeout in the CANopen sample from 50 milliseconds
to 1 millisecond. This vastly improves performance of the sample and
matches the example code present in the CANopenNode stack.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
ADC_1 peripheral instance was enabled by default in driver.
This is not the usual way to enable peripheral instances, as it
makes board configuration unclear.
Move activation in boards that are declaring ADC support.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With the change in SDK 0.11.1 to newlib to remove
-DMISSING_SYSCALL_NAMES we now need to implement a version of
_gettimeofday. Previously with pre SDK 0.11.1 we had a recursive mess
of _gettimeofday_r -> gettimeofday -> _gettimeofday_r. (which are all
implemented in newlib and thus we didn't get a link error).
With SDK 0.11.1 we have: _gettimeofday_r -> _gettimeofday. And we
should provide a version of _gettimeofday.
Fixes#22484
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Single-bus warning in python parsing of device tree is suppressed if
this is also suppresed in the device tree compiler.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Pass arguments as command line from cmake to python. Extra DTC flags are
used later on to check errors in python.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
LPC SoCs share the same register for all GPIO poarts. This leads us to a
device tree configuration that missmatches GPIO register address and
GPIO port identifier.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This commit allows boards to have custom cmake parameters that are
loaded before device tree is processed.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Note that the client structure must be reinitialized before each use,
and make more clear that its internal fields are not part of the
public API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The DIS service requires BT_SETTINGS otherwise it will not have a
settings handler. Instead DIS will only use Kconfig to set it's
values.
Fixes: #22478
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
CONFIG_BOARD_FOO is enabled in a number of board *_defconfig files
although it is useless as it is set by default (as defined as a
one option choice, symbol defaults to 'y').
CONFIG_BOARD_FOO should remain only in target that are defined
in boards providing multiple choices (dual cores, board with multiple
revisions).
Clean it from STM32 impacted boards.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
if USERSPACE is configured, it needs to record the user/kernel mode
of interrupted thread, because the switch of aux_sec_k_sp/aux_user_sp
depends on the aux_irq_act's U bit.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Refactor the handling of network nodes and their keys into a separate
Mesh Configuration Database (CDB). This, not only creates a separation
of the local node and the other nodes, but also makes it possible to
implement functions to manage the whole, or at least parts of the mesh
network.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
