The SDK has a new path for x86 gcov, point to the new binary. Also, do
not clean artifacts when running coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Modifying west.yml to point to the TI HAL repo updated with the RF
driver and associated changes in the DPL.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The glob in modules/Kconfig accidentally picked up Kconfig.tls-generic,
which is only supposed to be included from modules/Kconfig.mbedtls.
Replace the globbing with explicit 'source's to fix it. Best to avoid
globbing unless absolutely necessary, because it tends to pick up random
non-checked-in files as well.
Use 'source' instead of 'osource' since the files are known to exists.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add STM32 CRYP driver support and a corresponding build-only test to
the crypto sample project.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This patch adds crypto driver support for all STM32F4 devices providing
a CRYP peripheral.
This driver implements the AES ECB, CBC and CTR modes of operation.
It has been tested on a STM32F437 SoC running the Zephyr crypto driver
sample.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Reflect changes in the APIs made since 0.6.0. These will also need to
be added to the release notes.
Some automatic directives weren't generating the desired output, so
either do it by hand or let new 0.7.0 docstrings supply the information.
Try to better group the content into sections.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
West now supports importing other manifest files. Document the basic
behavior.
Add a local table of contents for HTML output, to get a quick index of
the subsections of the "Manifest Imports" section.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix uninitialized advertiser rl_idx used to check own identity
in CONNECT_IND received for directed advertisements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Kconfig board choice only has only one option which is implicitly
enabled, therefore it is not necessary to set the symbol explicitly in
board defconfigs.
mimxrt10{50,60}_evk boards are excluded from this change because they
have multiple board configurations (e.g., hyperflash vs. qspi) in the
board choice.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The Kconfig board choice only has only one option which is implicitly
enabled, therefore it is not necessary to set the symbol explicitly in
board defconfigs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When building with LLVM we get the following error:
uart_stm32.c:272:9: error: implicit conversion from enumeration type
'enum uart_config_parity' to different enumeration type
'enum uart_config_flow_control' [-Werror,-Wenum-conversion]
return UART_CFG_PARITY_NONE;
~~~~~~ ^~~~~~~~~~~~~~~~~~~~
We shouldn't be mixing parity and flow control enum's. Use
UART_CFG_FLOW_CTRL_NONE instead or UART_CFG_PARITY_NONE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kconfig.tls-generic is already 'source'd within an 'if MBEDTLS' in
modules/Kconfig.mbedtls (the 'if' covers most of the file).
Flagged by https://github.com/zephyrproject-rtos/ci-tools/pull/128.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Interrupt routing on x86-64 is done entirely at runtime,
we should skip all 64-bit targets not just QEMU.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These arch_timing_ defines get used in certain timer
drivers and need to be in the public include space,
and not the private kernel headers.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
MetaIRQs are described in docs and exercised in tests, but there's no
sample explaining how they are intended to be used to perform
interrupt bottom half processing.
This simple tool spawns a set of worker threads at different
priorities (some cooperative) which process "messages" (which require
CPU time to handle) received from a fake "device" implemented with
timer interrupts. The device hands off the events directly to a
MetaIRQ thread which is expected to parse and dispatch them to the
worker threads.
The test demonstrates that no matter the state of the system, the
MetaIRQ thread always runs synchronously when woken by the ISR and is
able to preempt all worker threads to do its job.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The 'command' variable points at a python command object, not a
string. Take its name so the help text for west flash -h correctly
says 'flash' instead of 'debug'.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update to the latest merged commit in the module and remove reference to
pull request which was merged by mistake.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A few test header files have C++ guards around them, but are incorrect.
Those files had a leading `#` placed before `extern`, which is
incorrect. This commit simply removes those leading `#` characters.
Signed-off-by: Brooks Prumo <brooks@prumo.org>
Try and build the flash_shell on all platforms that have a flash driver
rather than a limited set of know platforms. This hopefully acts as a
build coverage test for all the flash drivers.
The flash shell requires around 10K of memory so limit it to systems
with 12K or more.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SAM flash driver was developed for the SAME70 SoCs and hasn't ever
been validated on the other SAM families (SAM3X, SAM4S). If we try and
build on one of the other SoC families we get build errors. So limit it
to just SAME70 for now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a 'deprecation_msg' string/flag to out_dev(). When 'deprecation_msg'
is passed, all generated macros include
__WARN(<deprecation_msg>)
which prints a custom warning if the macro is used.
Meant to be used when improving the output format.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The board ships with a write protected bootloader so the flash base
address was artifically adjusted to skip that bootloader. With commit
018bf777e7:
boards: arm: Make Adafruit boards use their DT-defined code partion.
We shouldn't need to artifically adjust the flash anymore. So remove
this, nice side effect is it fixes a dts compile warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace running west command tests in run_ci.sh with a github workflow.
This provides some benefits in that we can run the west command tests on
multiple python versions and host OSes (linux, mac and windows).
Also have the benefit that the tests are only run on modifications to
files in scripts/west_commands/ or scripts/west-commands.yml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For some time now we are building also the C++ samples in
native_posix in CI.
For those who want to run the whole suite locally, they
require g++-multilib, which was missing in the Ubuntu list
=> Add it.
Similarly the display sample is built in CI for
native_posix64, so add the 64bit SDL dev library to both
the Ubuntu and Fedora lists.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Use standard log settings. Since default LOG_IMMEDIATE has changed to
output one character we have one character ring buffer slots which
limit amount of logs stored.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove unneeded tag bluetooth. Those tests and samples use (should use)
depends_on: ble or whitelist platforms.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Suppress mailback conf to allow to use the -g parameter.
With the -g option it is possible to check coding style for multi
commits in the git tree without extracting them.
For instance the './scripts/checkpatch.pl --strict --git HEAD-4' command
checks the last 4 patches of the current branch.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Compile errors because of missing include file and typos
when accessing variables in the modem_pin struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
