Fix the Id of the longarray message.
Also change the display of the "Address" entry to use "Id" instead of
"Entry" to be consistent the other displayed entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case a write to the flash failed, do not leave the flash unprotected.
Always call flash_write_protection_set in that case.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Avoid unsetting and setting the flash protection if there is nothing to
write to the flash. This happens for example when deleting data from the
flash using nvs_delete.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case a sector is not empty nor properly closed (ie it never contains
8 times 0xff nor 0x00), the _nvs_prev_ate will loop indefinitely and
will start adressing memory outside of the flash area.
Fix that by stopping the loop when the address matches the beginning of
the sector.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of forcing the crc8 entry to 0xff for the crc8 computation, just
ignore this field in the computation as it is the last one. This avoid
having to set it back to the original value for _nvs_ate_crc8_check.
Add a build assertion to ensure crc8 is kept last.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The allocation table entry should be as small as possible in the flash,
so declare it as packed to avoid that the compiler pads it.
Note that this doesn't change anything on ARM, but it might help for
other (future) architectures.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
- Add a missing plural.
- Use a comma to separate the sector number with the offset to not
confuse that with a range.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update menuconfig.py to upstream revision 35a60b786c646.
This fixes some minor graphical glitching, with parts of lines that
don't fit the terminal wrapping around to the next line, and some
headings disappearing.
This version also adds supports for custom style definitions,
contributed by Mitja Horvat (punkfluid). Colors can be specified both by
number and in #RRGGBB notation. Color accuracy varies depending on
terminal capabilities, but will usually be good.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When no certificate-based ciphersuites are used, mbedTLS compiles out
hostname field and associated functions from its SSL context. This
resulted in compilation error when only PSK-based ciphersuites were
configured.
This commit resolves the issue by compiling-out hostname-related code
from secure sockets implementation on the same basis as mbedTLS does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The differentiation between the MCUs is handled in the HAL from Silabs.
So all EXX32 MCUs should use the same soc.c file.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_NRF51822_QFAA
CONFIG_SOC_NRF51822_QFAB
CONFIG_SOC_NRF51822_QFAC
CONFIG_SOC_NRF52810_QFAA
CONFIG_SOC_NRF52832_QFAA
CONFIG_SOC_NRF52832_CIAA
CONFIG_SOC_NRF52832_QFAB
CONFIG_SOC_NRF52840_QIAA
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_PART_NUMBER_SAME70*
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have a common DT_SIZE_K macro use it instead of defining
__SIZE_K eveywhere. We also have DT_SIZE_M, so use that in a few
places as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A blank line is needed after '.. code-block::', or the code gets
misinterpreted as RST parameters:
...doc/subsystems/logging/logger.rst:168: WARNING: Error in
"code-block" directive:
maximum 1 argument(s) allowed, 9 supplied.
.. code-block:: none
module = FOO
module-str = foo
source "subsys/logging/Kconfig.template.log_config"
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The RTC node for some reason was setting #address-cells and #size-cells.
However it has no children so there isn't really any reason to do this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The ARMv8-m Memory Protection Unit does not require MPU regions
to be power-of-two aligned and sized. This commit removes this
requirement when building for ARMv8-m MCUs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In case of out of tree SoC, mem.h will trigger and error since
it is not aware of new SoC CONFIG_SOC_<reference>.
Modify error condition in order to generate the error only if
the flash and error size are not defined at this point (even in
out of tree case).
Fixes#9978
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Checking the return of some scattered functions across kernel.
MISRA-C requires that all non-void functions have their return value
checked, though, in some cases there is nothing to do. Just
acknowledging it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
k_thread_create is used only in k_word_q_start that has no error
handling, so the return of that function is not used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A lot of times this API is called during some cleanup even if the
timeout was not set to make the code simpler. In these cases it's not
necessary checking the return. Adding a cast to acknowledge it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There are some cases where atomic_and/or don't need to be
checked. Actively acknowledge these cases.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Ignoring the return of _abort_timeout when there is nothing to
do. Either because the condition to return something different from 0
was prior checked or because it was called during come cleanup.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There are some cases that there is nothing to do with
_pend_current_thread() return (that is _Swap return value).
As MISRA-C requires that all non-void functions have their
return value checked, we are explicitly ignoring it when there is
nothing to do.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
__swap function was returning -EAGAIN in some case, though its return
value was declared as unsigned int.
This commit changes this function to return int since it can return a
negative value and its return was already been propagate as int.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Some syscacll return value through parameters and for these functions
the return of _arch_syscall_invoke* are not used.
MISRA requires that all return values be checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The result of both printk and vprintk are not used in any place.
MISRA-C says that the return of every non void function must be
checked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since builds have drastically increased in time, we end up timing out CI
if we have a larger number of tests to build. Try bumping up the number
of slaves to 7 and see if that helps.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To avoid having to set it externally, set the SOC_DIR environment
variable directly in the compliance script.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_PART_NUMBER_EFM32WG990F256
CONFIG_SOC_PART_NUMBER_EFR32FG1P133F256GM48
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_CC3220SF
CONFIG_SOC_MSP432P401R
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As far as possible SoC-specific code should be contained to it's
directory and core systems should not be referencing specific
SoCs. This keeps the common code clean and makes it easier to maintain
out-of-tree SoCs.
To this end we move CONFIG_SOC_TI_LM3S6965_QEMU's soft-reset related
code out of arch/arm/core/cortex_m and into arch/arm/soc/ti_lm3s6965.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test is intended to validate k_pipe_alloc_init()
and k_pipe_cleanup(), when CONFIG_USERSPACE is not defined.
Also added test to validate pending reader and pending writer
feature in pipe.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Module refactored: splitted data into read-only part and control block,
adding macro for creating log_output instance
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>