Library will be used by new shell implementation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added commands for getting current status and controlling which log
messages are forwared to available backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
New shell support features like:
- multi-instance
- command tree
- static and dynamic commands
- multiline
- help print function
- smart tab (autocompletion)
- meta-keys
- history, wildcards etc.
- generic transport (initially, uart present)
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The drivers/pinmux/dev directory doesn't containe any CMakeLists.txt
file, preventing to enable the PINMUX_DEV option. Fix that by providing
one.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
'use-prop-name' is not documented.
Update dts/bindings/device_node.yaml.template to fix this.
Document that 'type' attribute is not used.
Fixes#9971
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The spi project configuration was incorrectly enabling i2c, which causes
a cmake failure if a board supports spi but not i2c. Found by CI when
adding spi support to the mimxrt1050_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables an instance of the lpspi peripheral, configures the pinmuxes,
and updates the board documentation accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Introduces a new mcux lpspi shim driver to be used on the imxrt soc.
This shim driver leverages heavily from the mcux dspi shim driver
because the MCUXpresso SDK provides similar APIs for the lpspi and dspi
peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for nRF boards by using the software-based PWM driver. The
prescaler has to be configured so that the clock runs slower in order to
make the on-board LED blink in the way it is described in the Readme.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
The __reset vector is using the 'b' instruction to jump to _PrepC. 'b'
can only jump 2KB on Cortex-M0 platforms so this causes build failures
when _PrepC happens to be too far away from __reset.
To resolve this we use 'bl' instead as it can jump two thousand times
further[0].
This can also be resolved by porting the reset vector to C or by
placing the _PrepC function in a dedicated section that the linker
places next to __reset.
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0489e/Cihfddaf.html
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A confusing warning has popped up since 3.13. It can be observed as
so:
Zephyr version: 1.13.99
Parsing Kconfig tree in /home/sebo/zephyr/Kconfig
Merging /home/sebo/zephyr/samples/hello_world/prj.conf
warning: tag 'zephyr-v1.13.0' is really 'v1.13.0' here
-- Generating zephyr/include/generated/generated_dts_board.h
This warning is more confusing than useful so we suppress stderr from
'git describe' when the command runs successfully.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add a new command in the shell which can be used to set the channel
map by specifying a 37 bit bitmask written as a five byte hex array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add functionality for setting the host channel classification in
the controller using the HCI command.
This closes issue #9851
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixes the indentation for some code blocks and notes
through the "getting started" instructions.
The main effect is that an ordered list
is no longer broken by a note block.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
CI is failing sporadically with a corrupted
ToolchainCapabilityDatabase.cmake file.
To gain insight into how the file is corrupted we print it to the log.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When running combined build on nRF5 with disabled VS command it is
possible to simply read static random address from FICR in host.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds a shell command for qualification purposes to enable/disable
Bonding flag in Authentication Requirements.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds a function that will disable Bonding flag in
Authentication Requirements flag in SMP Pairing Request/Response.
This is needed for qualification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will exclude testing Mesh related code from build if BT_MESH
option in Kconfig is not set.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
There is now a proper function to select the right source IPv4
address when sending a mDNS packet so use it instead of selecting
the address directly from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Sync timeouts were calculated incorrectly - this led to a 'Multiple
Masters Issue' as denoted by PTP debugging software.
See 802.1AS-2011, chapter 10.2.4.2 for reference.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Fix the formula listed in help messages which is used to calculate
actual intervals given their log2 values.
It is all calculated properly in the code, because the unit of the
actual field uses the UScaledNs type of which the unit is 2^(-16)ns, so
it is just the help messages that got it wrong.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Calculate proper initial PTP clock divisors based on the MCK value.
Additionally do not allow adjusting the rate of the clock. This does not
seem to work properly with current gPTP rate adjustment algorithm.
Having proper PTP clock divisors and callbacks that allow getting,
setting and adjusting current time is sufficient for proper gPTP
support.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This enables using these commands to perform discover all procedure:
> gatt-discover-primary
Discover pending
Service 1800 found: start handle 1, end_handle 5
Service 1801 found: start handle 6, end_handle 9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes bt_gatt_discover perform discover all proceduce if no UUID
is given in the parameters.
Fixes#9713
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Long write procedure currently requires BT_GATT_PERM_PREPARE_WRITE to
be set otherwise the prepares would fail. This changes the behavior so
that BT_GATT_PERM_PREPARE_WRITE enables checking each prepare chunk
skipping it otherwise.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixed building with ninja adding BUILD_BYPRODUCTS based on suggestion
from @SebastianBoe in issue #7760.
Fixes#7760
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ninja is much faster than make in the context of CI. The issues with
ninja and parallel builds has been partially resolved in sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disable cache which increases total execution time without any visible
benefits in the current setup. Need to revisit how we can better use
ccache for CI builds.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Go back to 5 minions, 7 minions is increasing the queue significantly
without any improvements visible in total execution time.
This was changed to 7 to address PRs changing many boards and tests,
which is the exception and not the rule.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The scripts for app_smem need to be ready before the script for
privilaged stack is run. This is needed because there is a small
possibility that the stacks get aligned (due to app_smem)
after privilaged stack script is run. This causes the gperf
to create an incorrect hash.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
