This option prefers serial device names which are stable
across device plug/un-plug on platforms that support it (currently
just Linux, via /dev/serial/by-id).
This feature is opt-in as not all manufacturers include the
appropriate metadata for udev to generate unique names for their
devices.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
These drivers use legacy DT APIs to access data by node label. Update
them to use the new API.
Leave the existing Kconfig options in place. This helps with
bisectability in case of regressions and lets us proceed
incrementally. Removing the per-instance Kconfigs is also nontrivial
in these cases because of hard-coded dependencies in other subsystems.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Random readability improvements:
- avoid a stack trace on error by using sys.exit()
- include "error:" in the error() output, for grep
- print conflicting addresses on multiple IRQ registration
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We can't pass __COUNTER__ and then use it with '##' directly, because
the result is that the actual token __COUNTER__ is what gets pasted.
Fix that with another expansion, so __COUNTER__ is replaced with a
number before '## can' see it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This GitHub account has been disabled for over a year (it was replaced
by a `ricardosalveti` account). Remove from CODEOWNERS.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert from using dts_fixup.h based macros to DT_INST macro. This lets
us remove the dependancy on dts_fixup.h for this driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
During the last refactoring of the sample, CONFIG_MCUMGR_CMD_FS_MGMT
was mistakenly set to n instead of y for the bluetooth transport.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Some external audio devices require a master clock to be provided by
the I2S peripheral to work correctly. To allow for the operation of
these devices the master clock output should always be enabled when in
master mode.
Specific applications requiring this signal to be output can configure
the desitnation pin via the pinmux driver.
Signed-off-by: Abe Kohandel <abe@electronshepherds.com>
Add dts support for the headers on Adafruit Feather boards.
This will allow adding FeatherWing boards as shields.
Signed-off-by: Richard Osterloh <richard.osterloh@gmail.com>
Like other STM32 series the STM32L4x SoCs have an internal voltage
reference source that need to be enabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move board pinmux.c code to utilize
DT_NODELABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_GPIO_MCUX_LPC_PORT0_NAME and CONFIG_GPIO_MCUX_LPC_PORT1_NAME
aren't used anywhere so we can just remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the majority of the device tree into nxp_lpc55S6x_common.dtsi and
use ranges to handle the different address may for non-secure.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As prep for drivers being converted to utilize DT_INST and removal of
per instance Kconfig symbols, move board pinmux.c code to utilize
DT_NODELABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Have nodelabels match the SoC docs so when a nodelabel reference is
made in the code its easier to relate to the SoC.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Give NULL pointer when ad_len or sd_len is zero, this stops the host
from setting a zero length advertise data or scan response.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the advertise command not setting the peer address parameter to
NULL, this could turn it into a directed advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We don't need to define DT_NUM_IRQ_PRIO_BITS or DT_NUM_MPU_REGIONS in
dts_fixup.h files anymore, so we can remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To remove the need to have DT_NUM_IRQ_PRIO_BITS defined in every
dts_fixup.h we can just handle the few variant cases in irq.h. This
allows us to remove DT_NUM_MPU_REGIONS from all the dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To remove the need to have DT_NUM_MPU_REGIONS defined in every
dts_fixup.h we can just handle the few variant cases in arm_mpu.c
directly. This allows us to remove DT_NUM_MPU_REGIONS from all the
dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The documentation references now out-dated links to websites for
board landing page, and firmware download and instructions. This
commit updates the links and adds a link to the latest firmware
development for reference.
Fixes#24325
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Fix thread fault, on user mode, when reading variable rt_clock_base.
For the moment, clock_settime is left without system call:
we don't want to expose clock_settime without figuring out access
control
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
The UART driver for samd0 was is missing the .configure and
.config_get functionality expected from api for serial driver.
This commit fixes this by providing basic configuration
Signed-off-by: Kuba Sanak <contact@kuba.fyi>
Some other part of Zephyr has similar defines (SRC)
causing build failures.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit enables the GMAC Ethernet support for the `atsame54_xpro`
board which includes an on-board RMII PHY.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a reference to the SAM E54 maximum queue count value
in the device tree for specifying the range of `ETH_SAM_GMAC_QUEUES`
configuration.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds more pin function definitions (PINMUX_FUNC_I through
PINMUX_FUNC_P) to the pinmux interface header.
The SAM D5x and E5x series devices, for instances, define up to the
"function N" and this change is necessary to support such devices.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
