Refactor the imx rt code/data location config defaults such that we
default to on-chip memories at the soc level and override to external
memories at the board level. This means that we frequently override soc
defaults for evk boards, but it removes the assumption that all imx rt
boards (particularly non-evk boards) will have the same external
memories as evk boards.
The end result is that imx rt evk boards still have the same defaults as
before, but the way we get there is different.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The imx rt family of socs has several options for linking code and data
into internal or external memories, and up until now we have handled
these options at the board level. This has resulted in several Kconfig
symbols being defined in multiple places and triggering warnings in
documentation builds:
warning: the default selection CODE_ITCM (defined at boards/arm/mimxrt1050_evk/Kconfig:13, boards/arm/mimxrt1060_evk/Kconfig:13) of <choice> (defined at boards/arm/mimxrt1050_evk/Kconfig:9) is not contained in the choice
warning: the choice symbol CODE_ITCM (defined at boards/arm/mimxrt1050_evk/Kconfig:13, boards/arm/mimxrt1060_evk/Kconfig:13) is defined with a prompt outside the choice
warning: the choice symbol CODE_HYPERFLASH (defined at boards/arm/mimxrt1050_evk/Kconfig:16, boards/arm/mimxrt1060_evk/Kconfig:16) is defined with a prompt outside the choice
warning: the choice symbol CODE_QSPI (defined at boards/arm/mimxrt1050_evk/Kconfig:19, boards/arm/mimxrt1060_evk/Kconfig:19) is defined with a prompt outside the choice
warning: the choice symbol CODE_ITCM (defined at boards/arm/mimxrt1050_evk/Kconfig:13, boards/arm/mimxrt1060_evk/Kconfig:13) is defined with a prompt outside the choice
warning: the choice symbol CODE_HYPERFLASH (defined at boards/arm/mimxrt1050_evk/Kconfig:16, boards/arm/mimxrt1060_evk/Kconfig:16) is defined with a prompt outside the choice
warning: the choice symbol CODE_QSPI (defined at boards/arm/mimxrt1050_evk/Kconfig:19, boards/arm/mimxrt1060_evk/Kconfig:19) is defined with a prompt outside the choice
The number of warnings increased as we added more imx rt boards. Fix the
warnings by moving code and data location configs from the board level
to the soc level.
The default memories for all imx rt boards are unchanged. The
mimxrt10{20,50,60}_evk boards still default to hyperflash/qspi for code
and sdram for data. The mimxrt1064_evk board still defaults to ITCM for
code and DTCM for data because jlink does not yet support programming
internal flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Be consistent in how board docs are named and move all to index.rst.
This will make the URL to the board documentation predictable and easier
to remember.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds device tree bindings and nodes for the rocktech lcd module used on
imx rt boards. The use of port, endpoint, and remote-endpoint properties
follow what is currently done in linux, but they are not yet used in
zephyr because some additional plumbing is needed in the
extract_dts_includes.py script.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Changes the default code location from internal itcm to external qspi or
hyperflash. Changes the default data location from internal dtcm to
external sdram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new configuration option to mimxrt10{20,60,64}_evk boards to link
data into external sdram. The default remains to link data into internal
data tightly coupled memory (DTCM).
Note that mimxrt1050_evk is not included because it already has support
for linking data into sdram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The dts files on these boards had some CONFIG_ defines related to which
memory should be used to hold code. We move this choice out of DTS and
back into Kconfig.
As such, we removed the default setting of 'zephyr,flash' and just
map
CONFIG_CODE_ITCM to:
DT_NXP_IMX_RT_ITCM_0_SIZE
DT_NXP_IMX_RT_ITCM_0_BASE_ADDRESS
CONFIG_CODE_{QSPI,HYPERFLASH} to:
DT_NXP_IMX_FLEXSPI_402A8000_SIZE_1
DT_NXP_IMX_FLEXSPI_402A8000_BASE_ADDDRESS_1
for the mimxrt1050_evk, we remove the default setting of 'zephyr,sram'
and just map:
CONFIG_DATA_DTCM to:
DT_NXP_IMX_DTCM_0_SIZE
DT_NXP_IMX_DTCM_0_BASE_ADDRESS
CONFIG_DATA_SDRAM to:
DT_MMIO_SRAM_80000000_SIZE
DT_MMIO_SRAM_80000000_BASE_ADDRESS
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are setting the code to be in HyperFlash (CONFIG_CODE_HYPERFLASH)
or QSPI (CONFIG_CODE_QSPI) we should enable
CONFIG_NXP_IMX_RT_BOOT_HEADER.
Update mimxrt1064_evk to use select like other boards.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables instance 3 of the lpuart driver and configures pinmuxes to use
bluetooth hci on the mimxrt1060_evk board. Updates board documentation
accordingly.
Tested with samples/bluetooth/peripheral_hr, with frdm_kw41z attached as
an arduino shield running the nxp hci controller application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix the QSPI and hyperflash nodes to be proper SPI children and expose
the address range for direct access as part of the controller's reg
region.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The mimxrt1020_evk and mimxrt1060_evk boards had invalid jlink device
names. Debugging via 'ninja debug' now works on these boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes a Kconfig typo in the mimxrt1060_evk board that was introduced
when the board was split into separate hyperflash and qspi
configurations.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Moves the default TEXT_SECTION_OFFSET from the board level to the soc
level for the imx rt series. This offset is used to reserve space for
the imx boot header for external xip flash images.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
To enable the Hyperflash you have to physically modify the board and
this disables the QSPI. Since we plan on removing Kconfig from device
trees, its easier to treat the hyperflash as a separate board config
and thus it will get a dts to match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes broken user guide and schematics links in nxp board documentation.
Updates remaining nxp.com links from http to https.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This can help find unused symbols. Those end up without a type if
'default' is used instead of 'def_bool', which generates a warning.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
a longer explanation.
Keep the 'def_bool' for the following symbols, which seem to be
deliberately defined only in Kconfig.defconfig files:
- ALTERA_AVALON_I2C
- ALTERA_AVALON_MSGDMA
- ALTERA_AVALON_PIO
- ALTERA_AVALON_QSPI
- ALTERA_AVALON_SYSID
- CLOCK_CONTROL_IMX_CCM
- CPU_EM4_DMIPS
- CPU_EM4_FPUDA
- CPU_EM4_FPUS
- FP_FPU_DA
- I2C_GECKO
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add board support files for mimxrt1060_evk, the development board for
i.MXRT1062 (CM7) SoC.
- Add pinmux, dts, doc.
- External QSPI flash hasn't been configured yet. So code can be loaded
to SRAM for now.
- Tested samples: hello_world, philosophers, synchronization,
basic/blinky, and basic/button.
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>