michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/dts/arm/Makefile

23 lines
1.2 KiB
Makefile
Raw Normal View History

dts: Add support for Device Tree This patch adds support for using device tree configuration files for configuring ARM platforms. In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set of options were removed so that it would be easier to work through the plumbing of the build system. It should be noted that the host system must provide access to the device tree compiler (DTC). The DTC can usually be installed on host systems through distribution packages or by downloading and compiling from https://git.kernel.org/pub/scm/utils/dtc/dtc.git This patch also requires the Python yaml package. This change implements parts of each of the following Jira: ZEP-1304 ZEP-1305 ZEP-1306 ZEP-1307 ZEP-1589 Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8 Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-29 23:53:17 -06:00
ifeq ($(CONFIG_HAS_DTS),y)
dts: arm: Kinetis: Add FRDM_K64F support This patch adds DTS support for the FRDM_K64F board. The defconfig enables the DTS usage and the FRDM K64F specific DTS file provides the differences from the base Kinetis DTS definitions. A fixup file is provided to map the generated configuration information to the driver consumers. The fixup file will be removed once the drivers are modified to handle the newly generated information. Change-Id: Ib0ada28faff6a30e8b40eba5c5853e9018ae5fcb Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-30 00:19:46 -06:00
dtb-$(CONFIG_BOARD_FRDM_K64F) = frdm_k64f.dts_compiled
kw41z: add base DTS support This patch adds the base DTS support for the KW41Z Freedom board. The initial set of changes include SRAM, FLASH, IRQ controller and LPUART support. Change-Id: Ic68c4959ddad0c5cfe70d5576a0e58372b93ec9d Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
2017-02-06 15:09:30 +02:00
dtb-$(CONFIG_BOARD_FRDM_KW41Z) = frdm_kw41z.dts_compiled
arm: Support for new ARM board FRDM-KL25Z In order to allow the use of such board, a very preliminar port was developed. It consists of board files, as well as pinmux, uart, gpio, spi drivers and device tree files. Change-Id: I5753064e39e0b023cf4481744c176de26d8dbebb Signed-off-by: Gustavo Denardin <gustavo.denardin@gmail.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-03 15:38:40 -03:00
dtb-$(CONFIG_BOARD_FRDM_KL25Z) = frdm_kl25z.dts_compiled
dts: arm: Kinetis: Add support for Hexiwear K64 This patch adds DTS support for the Hexiwear K64 platform. This includes enabling the DTS config option and adding conditionals around the options to be replaced. In addition, a DTS file is provided that customizes the Kinetis platform to match the hexiwear board. A fixup file is provided to map the generated information to the current client driver usage. This file is temporary. Change-Id: I247d538c6e13e0d1d4141fee74046575a7d2972e Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-30 00:21:11 -06:00
dtb-$(CONFIG_BOARD_HEXIWEAR_K64) = hexiwear_k64.dts_compiled
hexiwear_kw40z: Add hexiwear_kw40z board Adds initial support and documentation for the kw40z on the hexiwear board. Jira: ZEP-1391 Change-Id: Idb58bfb3c2951b1f737a8c547860bde4ef4d9a3e Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2017-04-06 12:39:17 -05:00
dtb-$(CONFIG_BOARD_HEXIWEAR_KW40Z) = hexiwear_kw40z.dts_compiled
dts: arm: Add base DTS support for TI CC3200 This patch adds the necessary DTS, YAML, and Makefile changes necessary to generate proper include information for the CC3200. The initial base support includes SRAM, FLASH, and UART devices. Change-Id: I8ef8c24c3915198dbb5cfeb2431aa6dc68267d0e Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-02-04 21:50:45 -06:00
dtb-$(CONFIG_BOARD_CC3200_LAUNCHXL) = cc3200_launchxl.dts_compiled
boards: Add support for the CC3220SF_LAUNCHXL board CC3220SF_LAUNCHXL effectively replaces the CC3200_LAUNCHXL, with support for the CC3220SF SoC, which is an update for the CC3200 SoC. This is supported by the Texas Instruments CC3220 SDK. Jira: ZEP-1958 Change-Id: I2484d3ee87b7f909c783597d95128f2b45db36f2 Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
2017-04-18 14:43:44 -07:00
dtb-$(CONFIG_BOARD_CC3220SF_LAUNCHXL) = cc3220sf_launchxl.dts_compiled
dts: arm: Add base DTS support for STM32 Nucleo board This patch adds the base DTS and yaml files required to support DTS for the STM32L476 based Nucleo board. Change-Id: Ic606a895a25f27d2990f651d0f3c3c5d84818cfd Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-02-04 23:29:41 -06:00
dtb-$(CONFIG_BOARD_NUCLEO_L476RG) = nucleo_l476rg.dts_compiled
arm: dts: Add base DTS support for v2m_beetle This patch adds the base DTS support for the V2M Beetle board. The initial set of changes include SRAM, FLASH, and IRQ controller support. Change-Id: I06685622b9c57ac358544c71350074ce06e3371e Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-02-06 00:12:40 -06:00
dtb-$(CONFIG_BOARD_V2M_BEETLE) = v2m_beetle.dts_compiled
dts: arm: Add base DTS support for Olimexino STM32 board This patch adds the base DTS files required to support DTS for the STM32F103xB based Olimexino STM32 board. Origin: Original Change-Id: I2a20d3f3ce8b1d3c20fe92b2ffa584c69fbd96a5 Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
2017-02-19 20:01:30 +02:00
dtb-$(CONFIG_BOARD_OLIMEXINO_STM32) = olimexino_stm32.dts_compiled
arm: dts: st: Convert STM32F4 based boards to dts Converted over all STM32F4 based boards to use device tree and removed associated bits that now come from the device tree for STM32F4. Boards that are now using devicetree: * 96b_carbon * nucleo f401re * nucleo f411re Change-Id: Ibe197ca0a3f5ad78d594485a578d986403cc824a Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-05 11:21:10 -05:00
dtb-$(CONFIG_BOARD_96B_CARBON) = 96b_carbon.dts_compiled
dtb-$(CONFIG_BOARD_NUCLEO_F401RE) = nucleo_f401re.dts_compiled
dtb-$(CONFIG_BOARD_NUCLEO_F411RE) = nucleo_f411re.dts_compiled
arm: dts: st: Convert STM32F1 based boards to dts Converted over all STM32F1 based boards to use device tree and removed associated bits that now come from the device tree for STM32F1. Also renamed the STM32F10{3,7} SoC dtsi to try and make it clear that the 'X' is a place holder. Fixedup the top level compatiables in the boards to be the specific 'X' instead of the generic one. Boards that are now using devicetree: * Nucleo f103rb * STM3210C Eval * STM32 MINI A15 Change-Id: I29b3634ec7451f974687d55980414efa655e2e96 Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-05 11:22:20 -05:00
dtb-$(CONFIG_BOARD_NUCLEO_F103RB) = nucleo_f103rb.dts_compiled
dtb-$(CONFIG_BOARD_STM3210C_EVAL) = stm3210c_eval.dts_compiled
dtb-$(CONFIG_BOARD_STM32_MINI_A15) = stm32_mini_a15.dts_compiled
arm: dts: st: Convert STM32F3 based boards to dts Converted over all STM32F3 based boards to use device tree and removed associated bits that now come from the device tree for STM32F3. Boards that are now using devicetree: * Nucleo f334r8 * STM32373C Eval Change-Id: I081a1d83f86e417a98b6864c745354b6b32953b7 Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-05 11:26:50 -05:00
dtb-$(CONFIG_BOARD_NUCLEO_F334R8) = nucleo_f334r8.dts_compiled
dtb-$(CONFIG_BOARD_STM32373C_EVAL) = stm32373c_eval.dts_compiled
arm: dts: st: Convert STM32F4 based boards to dts Converted over all STM32F4 based boards to use device tree and removed associated bits that now come from the device tree for STM32F4. Boards that are now using devicetree: * 96b_carbon * nucleo f401re * nucleo f411re Change-Id: Ibe197ca0a3f5ad78d594485a578d986403cc824a Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-04-05 11:21:10 -05:00
dts: Add support for Device Tree This patch adds support for using device tree configuration files for configuring ARM platforms. In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set of options were removed so that it would be easier to work through the plumbing of the build system. It should be noted that the host system must provide access to the device tree compiler (DTC). The DTC can usually be installed on host systems through distribution packages or by downloading and compiling from https://git.kernel.org/pub/scm/utils/dtc/dtc.git This patch also requires the Python yaml package. This change implements parts of each of the following Jira: ZEP-1304 ZEP-1305 ZEP-1306 ZEP-1307 ZEP-1589 Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8 Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-29 23:53:17 -06:00
always := $(dtb-y)
endif
Copy permalink