michaelh/zephyr
1
0
Fork 0
Code Releases Activity
zephyr/soc/arm/st_stm32/stm32f7/dts_fixup.h

172 lines
10 KiB
C
Raw Normal View History

license: cleanup: add SPDX Apache-2.0 license identifier Update the files which contain no license information with the 'Apache-2.0' SPDX license identifier. Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of Zephyr, which is Apache version 2. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-04-06 09:08:09 -04:00
/* SPDX-License-Identifier: Apache-2.0 */
arch: arm: stm32: Basic STM32F7 family support The patch includes support for STM32F746xG subfamily. Related to issue #6981. Signed-off-by: Yurii Hamann <yurii@hamann.site>
2018-06-13 21:04:43 +03:00
/* SoC level DTS fixup file */
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_NUM_IRQ_PRIO_BITS DT_ARM_V7M_NVIC_E000E100_ARM_NUM_IRQ_PRIORITY_BITS
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_NUM_MPU_REGIONS DT_ARM_ARMV7M_MPU_E000ED90_ARM_NUM_MPU_REGIONS
soc: arm: add ARM MPU node info and fixup for Cortex-M7 SoCs Unlike Cortex-M3 and Cortex-M4, in Cortex-M7 the number of MPU regions may vary based on the implementation. This commit adds a DTS node for the ARM MPU peripheral in the device tree of Cortex-M7 SoCs and updates the fixup files, so we may extract the number of MPU regions at build time. SoCs: - nxp_rt - same70 - stm32f7 Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
2019-05-14 09:00:10 +02:00
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOA_BASE_ADDRESS DT_ST_STM32_GPIO_40020000_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOA_CLOCK_BITS_0 DT_ST_STM32_GPIO_40020000_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOA_CLOCK_BUS_0 DT_ST_STM32_GPIO_40020000_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOA_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40020000_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOA_LABEL DT_ST_STM32_GPIO_40020000_LABEL
#define DT_GPIO_STM32_GPIOA_SIZE DT_ST_STM32_GPIO_40020000_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOA_CLOCK_BITS DT_ST_STM32_GPIO_40020000_CLOCK_BITS
#define DT_GPIO_STM32_GPIOA_CLOCK_BUS DT_ST_STM32_GPIO_40020000_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOB_BASE_ADDRESS DT_ST_STM32_GPIO_40020400_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOB_CLOCK_BITS_0 DT_ST_STM32_GPIO_40020400_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOB_CLOCK_BUS_0 DT_ST_STM32_GPIO_40020400_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOB_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40020400_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOB_LABEL DT_ST_STM32_GPIO_40020400_LABEL
#define DT_GPIO_STM32_GPIOB_SIZE DT_ST_STM32_GPIO_40020400_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOB_CLOCK_BITS DT_ST_STM32_GPIO_40020400_CLOCK_BITS
#define DT_GPIO_STM32_GPIOB_CLOCK_BUS DT_ST_STM32_GPIO_40020400_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOC_BASE_ADDRESS DT_ST_STM32_GPIO_40020800_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOC_CLOCK_BITS_0 DT_ST_STM32_GPIO_40020800_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOC_CLOCK_BUS_0 DT_ST_STM32_GPIO_40020800_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOC_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40020800_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOC_LABEL DT_ST_STM32_GPIO_40020800_LABEL
#define DT_GPIO_STM32_GPIOC_SIZE DT_ST_STM32_GPIO_40020800_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOC_CLOCK_BITS DT_ST_STM32_GPIO_40020800_CLOCK_BITS
#define DT_GPIO_STM32_GPIOC_CLOCK_BUS DT_ST_STM32_GPIO_40020800_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOD_BASE_ADDRESS DT_ST_STM32_GPIO_40020C00_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOD_CLOCK_BITS_0 DT_ST_STM32_GPIO_40020C00_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOD_CLOCK_BUS_0 DT_ST_STM32_GPIO_40020C00_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOD_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40020C00_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOD_LABEL DT_ST_STM32_GPIO_40020C00_LABEL
#define DT_GPIO_STM32_GPIOD_SIZE DT_ST_STM32_GPIO_40020C00_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOD_CLOCK_BITS DT_ST_STM32_GPIO_40020C00_CLOCK_BITS
#define DT_GPIO_STM32_GPIOD_CLOCK_BUS DT_ST_STM32_GPIO_40020C00_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOE_BASE_ADDRESS DT_ST_STM32_GPIO_40021000_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOE_CLOCK_BITS_0 DT_ST_STM32_GPIO_40021000_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOE_CLOCK_BUS_0 DT_ST_STM32_GPIO_40021000_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOE_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40021000_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOE_LABEL DT_ST_STM32_GPIO_40021000_LABEL
#define DT_GPIO_STM32_GPIOE_SIZE DT_ST_STM32_GPIO_40021000_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOE_CLOCK_BITS DT_ST_STM32_GPIO_40021000_CLOCK_BITS
#define DT_GPIO_STM32_GPIOE_CLOCK_BUS DT_ST_STM32_GPIO_40021000_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOF_BASE_ADDRESS DT_ST_STM32_GPIO_40021400_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOF_CLOCK_BITS_0 DT_ST_STM32_GPIO_40021400_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOF_CLOCK_BUS_0 DT_ST_STM32_GPIO_40021400_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOF_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40021400_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOF_LABEL DT_ST_STM32_GPIO_40021400_LABEL
#define DT_GPIO_STM32_GPIOF_SIZE DT_ST_STM32_GPIO_40021400_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOF_CLOCK_BITS DT_ST_STM32_GPIO_40021400_CLOCK_BITS
#define DT_GPIO_STM32_GPIOF_CLOCK_BUS DT_ST_STM32_GPIO_40021400_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOG_BASE_ADDRESS DT_ST_STM32_GPIO_40021800_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOG_CLOCK_BITS_0 DT_ST_STM32_GPIO_40021800_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOG_CLOCK_BUS_0 DT_ST_STM32_GPIO_40021800_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOG_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40021800_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOG_LABEL DT_ST_STM32_GPIO_40021800_LABEL
#define DT_GPIO_STM32_GPIOG_SIZE DT_ST_STM32_GPIO_40021800_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOG_CLOCK_BITS DT_ST_STM32_GPIO_40021800_CLOCK_BITS
#define DT_GPIO_STM32_GPIOG_CLOCK_BUS DT_ST_STM32_GPIO_40021800_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOH_BASE_ADDRESS DT_ST_STM32_GPIO_40021C00_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOH_CLOCK_BITS_0 DT_ST_STM32_GPIO_40021C00_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOH_CLOCK_BUS_0 DT_ST_STM32_GPIO_40021C00_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOH_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40021C00_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOH_LABEL DT_ST_STM32_GPIO_40021C00_LABEL
#define DT_GPIO_STM32_GPIOH_SIZE DT_ST_STM32_GPIO_40021C00_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOH_CLOCK_BITS DT_ST_STM32_GPIO_40021C00_CLOCK_BITS
#define DT_GPIO_STM32_GPIOH_CLOCK_BUS DT_ST_STM32_GPIO_40021C00_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOI_BASE_ADDRESS DT_ST_STM32_GPIO_40022000_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOI_CLOCK_BITS_0 DT_ST_STM32_GPIO_40022000_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOI_CLOCK_BUS_0 DT_ST_STM32_GPIO_40022000_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOI_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40022000_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOI_LABEL DT_ST_STM32_GPIO_40022000_LABEL
#define DT_GPIO_STM32_GPIOI_SIZE DT_ST_STM32_GPIO_40022000_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOI_CLOCK_BITS DT_ST_STM32_GPIO_40022000_CLOCK_BITS
#define DT_GPIO_STM32_GPIOI_CLOCK_BUS DT_ST_STM32_GPIO_40022000_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOJ_BASE_ADDRESS DT_ST_STM32_GPIO_40022400_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOJ_CLOCK_BITS_0 DT_ST_STM32_GPIO_40022400_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOJ_CLOCK_BUS_0 DT_ST_STM32_GPIO_40022400_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOJ_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40022400_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOJ_LABEL DT_ST_STM32_GPIO_40022400_LABEL
#define DT_GPIO_STM32_GPIOJ_SIZE DT_ST_STM32_GPIO_40022400_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOJ_CLOCK_BITS DT_ST_STM32_GPIO_40022400_CLOCK_BITS
#define DT_GPIO_STM32_GPIOJ_CLOCK_BUS DT_ST_STM32_GPIO_40022400_CLOCK_BUS
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOK_BASE_ADDRESS DT_ST_STM32_GPIO_40022800_BASE_ADDRESS
#define DT_GPIO_STM32_GPIOK_CLOCK_BITS_0 DT_ST_STM32_GPIO_40022800_CLOCK_BITS_0
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOK_CLOCK_BUS_0 DT_ST_STM32_GPIO_40022800_CLOCK_BUS_0
#define DT_GPIO_STM32_GPIOK_CLOCK_CONTROLLER DT_ST_STM32_GPIO_40022800_CLOCK_CONTROLLER
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_GPIO_STM32_GPIOK_LABEL DT_ST_STM32_GPIO_40022800_LABEL
#define DT_GPIO_STM32_GPIOK_SIZE DT_ST_STM32_GPIO_40022800_SIZE
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_GPIO_STM32_GPIOK_CLOCK_BITS DT_ST_STM32_GPIO_40022800_CLOCK_BITS
#define DT_GPIO_STM32_GPIOK_CLOCK_BUS DT_ST_STM32_GPIO_40022800_CLOCK_BUS
#define DT_I2C_1_BASE_ADDRESS DT_ST_STM32_I2C_V2_40005400_BASE_ADDRESS
#define DT_I2C_1_EVENT_IRQ_PRI DT_ST_STM32_I2C_V2_40005400_IRQ_EVENT_PRIORITY
#define DT_I2C_1_ERROR_IRQ_PRI DT_ST_STM32_I2C_V2_40005400_IRQ_ERROR_PRIORITY
i2c: Rename CONFIG_I2C_[0..5]_NAME -> DT_I2C_[0..5]_NAME Now that everything is DT based for I2C drivers we can rename the CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-22 09:38:21 -05:00
#define DT_I2C_1_NAME DT_ST_STM32_I2C_V2_40005400_LABEL
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_I2C_1_EVENT_IRQ DT_ST_STM32_I2C_V2_40005400_IRQ_EVENT
#define DT_I2C_1_ERROR_IRQ DT_ST_STM32_I2C_V2_40005400_IRQ_ERROR
#define DT_I2C_1_BITRATE DT_ST_STM32_I2C_V2_40005400_CLOCK_FREQUENCY
#define DT_I2C_1_CLOCK_BITS DT_ST_STM32_I2C_V2_40005400_CLOCK_BITS
#define DT_I2C_1_CLOCK_BUS DT_ST_STM32_I2C_V2_40005400_CLOCK_BUS
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_I2C_2_BASE_ADDRESS DT_ST_STM32_I2C_V2_40005800_BASE_ADDRESS
#define DT_I2C_2_EVENT_IRQ_PRI DT_ST_STM32_I2C_V2_40005800_IRQ_EVENT_PRIORITY
#define DT_I2C_2_ERROR_IRQ_PRI DT_ST_STM32_I2C_V2_40005800_IRQ_ERROR_PRIORITY
i2c: Rename CONFIG_I2C_[0..5]_NAME -> DT_I2C_[0..5]_NAME Now that everything is DT based for I2C drivers we can rename the CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-22 09:38:21 -05:00
#define DT_I2C_2_NAME DT_ST_STM32_I2C_V2_40005800_LABEL
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_I2C_2_EVENT_IRQ DT_ST_STM32_I2C_V2_40005800_IRQ_EVENT
#define DT_I2C_2_ERROR_IRQ DT_ST_STM32_I2C_V2_40005800_IRQ_ERROR
#define DT_I2C_2_BITRATE DT_ST_STM32_I2C_V2_40005800_CLOCK_FREQUENCY
#define DT_I2C_2_CLOCK_BITS DT_ST_STM32_I2C_V2_40005800_CLOCK_BITS
#define DT_I2C_2_CLOCK_BUS DT_ST_STM32_I2C_V2_40005800_CLOCK_BUS
dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 15:15:23 +01:00
#define DT_I2C_3_BASE_ADDRESS DT_ST_STM32_I2C_V2_40005C00_BASE_ADDRESS
#define DT_I2C_3_EVENT_IRQ_PRI DT_ST_STM32_I2C_V2_40005C00_IRQ_EVENT_PRIORITY
#define DT_I2C_3_ERROR_IRQ_PRI DT_ST_STM32_I2C_V2_40005C00_IRQ_ERROR_PRIORITY
i2c: Rename CONFIG_I2C_[0..5]_NAME -> DT_I2C_[0..5]_NAME Now that everything is DT based for I2C drivers we can rename the CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-22 09:38:21 -05:00
#define DT_I2C_3_NAME DT_ST_STM32_I2C_V2_40005C00_LABEL
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_I2C_3_EVENT_IRQ DT_ST_STM32_I2C_V2_40005C00_IRQ_EVENT
#define DT_I2C_3_ERROR_IRQ DT_ST_STM32_I2C_V2_40005C00_IRQ_ERROR
#define DT_I2C_3_BITRATE DT_ST_STM32_I2C_V2_40005C00_CLOCK_FREQUENCY
#define DT_I2C_3_CLOCK_BITS DT_ST_STM32_I2C_V2_40005C00_CLOCK_BITS
#define DT_I2C_3_CLOCK_BUS DT_ST_STM32_I2C_V2_40005C00_CLOCK_BUS
dts_fixups: Update labels generated from DTS with DT_ prefix All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_" in their names, assumed to be generated by the extracting script, are updated with the DT_ prefix, to reflect the recent changes made to the script. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-11-13 12:24:15 +01:00
stm32: dts: f7: added i2c4 node Added i2c4 node to stm32f746.dtsi for stm32f74+ socs. Added device tree fixup for i2c4. Signed-off-by: AJ Palmer <ajpcode@hotmail.com>
2018-12-11 22:42:25 +00:00
#define DT_I2C_4_BASE_ADDRESS DT_ST_STM32_I2C_V2_40006000_BASE_ADDRESS
#define DT_I2C_4_EVENT_IRQ_PRI DT_ST_STM32_I2C_V2_40006000_IRQ_EVENT_PRIORITY
#define DT_I2C_4_ERROR_IRQ_PRI DT_ST_STM32_I2C_V2_40006000_IRQ_ERROR_PRIORITY
i2c: Rename CONFIG_I2C_[0..5]_NAME -> DT_I2C_[0..5]_NAME Now that everything is DT based for I2C drivers we can rename the CONFIG_I2C_[0..5]_NAME define to DT_I2C_[0..5]_NAME. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-10-22 09:38:21 -05:00
#define DT_I2C_4_NAME DT_ST_STM32_I2C_V2_40006000_LABEL
dts: arm: stm32: cleanup whitespace in dts_fixup headers Try to format the dts_fixup header files as uniformly as possible. Signed-off-by: Erwin Rol <erwin@erwinrol.com>
2019-09-19 16:35:52 +02:00
#define DT_I2C_4_EVENT_IRQ DT_ST_STM32_I2C_V2_40006000_IRQ_EVENT
#define DT_I2C_4_ERROR_IRQ DT_ST_STM32_I2C_V2_40006000_IRQ_ERROR
#define DT_I2C_4_BITRATE DT_ST_STM32_I2C_V2_40006000_CLOCK_FREQUENCY
#define DT_I2C_4_CLOCK_BITS DT_ST_STM32_I2C_V2_40006000_CLOCK_BITS
#define DT_I2C_4_CLOCK_BUS DT_ST_STM32_I2C_V2_40006000_CLOCK_BUS
drivers: counter: rtc_stm32: convert to DT_INST defines Convert driver to use DT_INST_ defines. Removed DT_RTC_0 fixup macros but keep DT_RTC_NAME_0 as it is still in use across RTC users. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-02-27 17:48:19 +01:00
#define DT_RTC_0_NAME DT_INST_0_ST_STM32_RTC_LABEL
drivers/rtc: Enable RTC driver for STM32F7 series Enable RTC driver for STM32F7 series. Signed-off-by: Christian Taedcke <hacking@taedcke.com>
2018-10-16 21:51:00 +02:00
drivers: flash: flash_stm32: convert to DT_INST defines Convert driver to use DT_INST_ defines. Removed DT_FLASH_DEV fixup macros, except DT_FLASH_DEV_NAME used in applications. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2020-02-28 09:34:27 +01:00
#define DT_FLASH_DEV_NAME DT_INST_0_ST_STM32F7_FLASH_CONTROLLER_LABEL
drivers: flash: add driver for STM32F7x series This patch adds a flash driver for the STM32F7x series, inspired from the STM32F4x one. It has been tested on the STM32F723, but should also work on other SoCs of the family. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-09-02 21:05:52 +02:00
boards: arm: nucleo_f746zg: Activate CAN on nucleo F746zg This commit adds CAN support for nucleo F746zg. Furtermore CAN was added in stm32f7.dtsi and pinmuc_stm32f7.h CAN_RX: PD0, CAN_TX: PD1 Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-04-05 13:54:59 +02:00
#define DT_CAN_1_BASE_ADDRESS DT_ST_STM32_CAN_40006400_BASE_ADDRESS
#define DT_CAN_1_BUS_SPEED DT_ST_STM32_CAN_40006400_BUS_SPEED
#define DT_CAN_1_NAME DT_ST_STM32_CAN_40006400_LABEL
#define DT_CAN_1_IRQ_TX DT_ST_STM32_CAN_40006400_IRQ_TX
#define DT_CAN_1_IRQ_RX0 DT_ST_STM32_CAN_40006400_IRQ_RX0
#define DT_CAN_1_IRQ_RX1 DT_ST_STM32_CAN_40006400_IRQ_RX1
#define DT_CAN_1_IRQ_SCE DT_ST_STM32_CAN_40006400_IRQ_SCE
#define DT_CAN_1_IRQ_PRIORITY DT_ST_STM32_CAN_40006400_IRQ_0_PRIORITY
#define DT_CAN_1_SJW DT_ST_STM32_CAN_40006400_SJW
dts: can: allow individual specification of prop seg and phase seg1 quanta Allow individual specification of the time quanta used for the CAN bus propagation segment and phase segment 1. Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-06-17 12:15:37 +02:00
#define DT_CAN_1_PROP_SEG DT_ST_STM32_CAN_40006400_PROP_SEG
#define DT_CAN_1_PHASE_SEG1 DT_ST_STM32_CAN_40006400_PHASE_SEG1
boards: arm: nucleo_f746zg: Activate CAN on nucleo F746zg This commit adds CAN support for nucleo F746zg. Furtermore CAN was added in stm32f7.dtsi and pinmuc_stm32f7.h CAN_RX: PD0, CAN_TX: PD1 Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-04-05 13:54:59 +02:00
#define DT_CAN_1_PHASE_SEG2 DT_ST_STM32_CAN_40006400_PHASE_SEG2
#define DT_CAN_1_CLOCK_BUS DT_ST_STM32_CAN_40006400_CLOCK_BUS
#define DT_CAN_1_CLOCK_BITS DT_ST_STM32_CAN_40006400_CLOCK_BITS
soc: stm32: Add fixups for WWDG EWI and clock info Extended the WWDG fixups to support early wake interrupt handling and clock information. Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
2019-07-15 15:47:29 +03:00
#define DT_WDT_0_NAME DT_INST_0_ST_STM32_WATCHDOG_LABEL
soc: arm: stm32: Revert changes for ADC fixups We need to define DT_ADC_1_NAME to use generic ADC subsystems(ex. adc_shell). Signed-off-by: Takumi Ando <takumi@t15.red>
2020-03-18 21:31:36 +09:00
#define DT_ADC_1_NAME DT_ST_STM32_ADC_40012000_LABEL
arch: arm: stm32: Basic STM32F7 family support The patch includes support for STM32F746xG subfamily. Related to issue #6981. Signed-off-by: Yurii Hamann <yurii@hamann.site>
2018-06-13 21:04:43 +03:00
/* End of SoC Level DTS fixup file */
Copy permalink