.. |
96b_aerocore2
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
96b_argonkey
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_avenger96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_carbon
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_carbon_nrf51
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
96b_meerkat96
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_neonkey
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
96b_nitrogen
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
96b_stm32_sensor_mez
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
96b_wistrio
|
boards: stm32: Move STM32 boards SPI pin configuration to device tree
|
2020-10-21 06:29:48 -05:00 |
actinius_icarus
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
adafruit_feather_m0_basic_proto
|
boards: adafruit_feather_m0_basic_proto: Add I2C support.
|
2020-10-21 06:46:52 -05:00 |
adafruit_feather_nrf52840
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
adafruit_feather_stm32f405
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
adafruit_itsybitsy_m4_express
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
adafruit_trinket_m0
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
arduino_due
|
boards: arm: enable HW stack protection by default on Atmel boards
|
2020-10-16 10:07:20 +02:00 |
arduino_nano_33_iot
|
drivers: wifi: esp: rename wifi-reset-gpios to reset-gpios
|
2020-10-20 07:32:01 -05:00 |
arduino_zero
|
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
|
2020-09-17 14:44:21 -05:00 |
arty
|
boards: arm: arty: Enable gpio is a feature on board yaml
|
2020-12-13 19:26:36 -05:00 |
atsamd20_xpro
|
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
|
2020-09-17 14:44:21 -05:00 |
atsamd21_xpro
|
boards: atmel: set BUILD_OUTPUT_HEX for OpenOCD boards
|
2020-09-17 14:44:21 -05:00 |
atsame54_xpro
|
boards: arm: enable HW stack protection by default on Atmel boards
|
2020-10-16 10:07:20 +02:00 |
atsamr21_xpro
|
samples: net: echo_server: Decrease buffer for atsamr21_xpro
|
2020-09-22 16:15:10 -05:00 |
b_l4s5i_iot01a
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
b_l072z_lrwan1
|
boards: b_l072z_lrwan1: Move usb support to device tree
|
2020-11-13 09:22:17 -06:00 |
bbc_microbit
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
bcm958401m2
|
driver: uart: ns16550: convert to DT_INST_*
|
2020-03-14 02:22:05 +02:00 |
bcm958402m2_a72
|
drivers: pcie_ep: iproc: shorten file names
|
2020-10-22 11:07:39 +02:00 |
bcm958402m2_m7
|
boards: arm: Add bcm958402m2_m7 board
|
2020-05-08 10:46:23 +02:00 |
bl652_dvk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
bl653_dvk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
bl654_dvk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
black_f407ve
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
black_f407zg_pro
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
blackpill_f401ce
|
boards: arm: blackpill_f401ce: add blackmagicprobe
|
2020-12-10 06:48:28 -06:00 |
blackpill_f411ce
|
boards: arm: blackpill_f411ce: add blackmagicprobe
|
2020-12-10 06:48:28 -06:00 |
bt510
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
cc26x2r1_launchxl
|
power: remove SYS_ and sys_ prefixes
|
2020-12-09 15:18:29 -05:00 |
cc1352r1_launchxl
|
power: remove SYS_ and sys_ prefixes
|
2020-12-09 15:18:29 -05:00 |
cc1352r_sensortag
|
power: remove SYS_ and sys_ prefixes
|
2020-12-09 15:18:29 -05:00 |
cc3220sf_launchxl
|
boards: doc update for cc32xx and cc13x2/cc26x2 boards
|
2020-09-14 19:14:34 -05:00 |
cc3235sf_launchxl
|
boards: doc update for cc32xx and cc13x2/cc26x2 boards
|
2020-09-14 19:14:34 -05:00 |
circuitdojo_feather_nrf9160
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
colibri_imx7d_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
cy8ckit_062_ble
|
boards: arm: Add PSoC-62 BLE Pioneer Kit
|
2020-10-22 08:18:27 -05:00 |
cy8ckit_062_wifi_bt
|
boards: cy8ckit_062_wifi_bt: Squash M4 and M0 boards
|
2020-10-13 13:16:09 +02:00 |
decawave_dwm1001_dev
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
degu_evk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
disco_l475_iot1
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
dragino_lsn50
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
efm32gg_slwstk6121a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32gg_stk3701a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32hg_slstk3400a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32pg_stk3402a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efm32wg_stk3800
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
efr32_radio
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
efr32mg_sltb004a
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
faze
|
boards: faze: enable EEPROM support
|
2020-09-14 12:47:32 -05:00 |
frdm_k22f
|
boards: frdm_k22f: Correct FXOS8700 i2c address
|
2020-11-02 10:29:41 -06:00 |
frdm_k64f
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
frdm_k82f
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
frdm_kl25z
|
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
|
2020-09-29 14:05:50 -05:00 |
frdm_kw41z
|
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
|
2020-09-29 14:05:50 -05:00 |
google_kukui
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
hexiwear_k64
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
hexiwear_kw40z
|
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
|
2020-09-29 14:05:50 -05:00 |
holyiot_yj16019
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
ip_k66f
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
lpcxpresso11u68
|
boards: lpcxpresso11u68: enable BUILD_OUTPUT_HEX
|
2020-09-14 12:47:32 -05:00 |
lpcxpresso55s16
|
doc: Add clock control details
|
2020-10-15 11:17:24 -05:00 |
lpcxpresso55s69
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
lpcxpresso54114
|
doc: Add clock control details
|
2020-10-15 11:17:24 -05:00 |
mec15xxevb_assy6853
|
power: standarize PM Kconfigs and cleanup
|
2020-12-09 15:18:29 -05:00 |
mec1501modular_assy6885
|
power: standarize PM Kconfigs and cleanup
|
2020-12-09 15:18:29 -05:00 |
mec2016evb_assy6797
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
mikroe_clicker_2
|
boards: MikroE Clicker 2: Added board
|
2020-11-30 15:50:59 +01:00 |
mikroe_mini_m4_for_stm32
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
mimx8mm_evk
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
mimxrt685_evk
|
boards: MXRT600: Increase the core frequency
|
2020-11-13 12:03:47 -06:00 |
mimxrt1010_evk
|
boards: arm: Use DT_SIZE macros for nxp external memories
|
2020-10-28 11:13:07 -05:00 |
mimxrt1015_evk
|
boards: arm: Use DT_SIZE macros for nxp external memories
|
2020-10-28 11:13:07 -05:00 |
mimxrt1020_evk
|
boards: arm: Use DT_SIZE macros for nxp external memories
|
2020-10-28 11:13:07 -05:00 |
mimxrt1050_evk
|
boards: arm: Use DT_SIZE macros for nxp external memories
|
2020-10-28 11:13:07 -05:00 |
mimxrt1060_evk
|
boards: arm: Use DT_SIZE macros for nxp external memories
|
2020-10-28 11:13:07 -05:00 |
mimxrt1064_evk
|
boards: arm: Use DT_SIZE macros for nxp external memories
|
2020-10-28 11:13:07 -05:00 |
mm_swiftio
|
boards: samples: Enable fat_fs sdhc sample on mm_swiftio board
|
2020-11-03 10:35:49 -06:00 |
mps2_an385
|
mps2_an385: use default stack sizes
|
2020-09-08 17:23:17 -04:00 |
mps2_an521
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
msp_exp432p401r_launchxl
|
kconfig: Rename CONFIG_FLOAT to CONFIG_FPU
|
2020-04-27 19:03:44 +02:00 |
npcx7m6fb_evb
|
drivers: adc: add adc support in npcx7 series
|
2020-12-07 12:11:17 -05:00 |
nrf51_ble400
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf51_blenano
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
nrf51_vbluno51
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
nrf51dk_nrf51422
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf51dongle_nrf51422
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52_adafruit_feather
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52_blenano2
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52_sparkfun
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52_vbluno52
|
boards: dts: nrf: Remove SoC compatible in top-level compatible
|
2020-04-29 08:20:15 -05:00 |
nrf52dk_nrf52805
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52dk_nrf52810
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52dk_nrf52832
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf5340dk_nrf5340
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
nrf9160_innblue21
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf9160_innblue22
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf9160dk_nrf9160
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
nrf9160dk_nrf52840
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf21540dk_nrf52840
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52832_mdk
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52833dk_nrf52820
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52833dk_nrf52833
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52840_blip
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52840_mdk
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
nrf52840_papyr
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52840dk_nrf52811
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52840dk_nrf52840
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nrf52840dongle_nrf52840
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
nucleo_f030r8
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f070rb
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f091rc
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f103rb
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f207zg
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f302r8
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f303re
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f334r8
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f401re
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f411re
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f412zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f413zh
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f429zi
|
boards: nucleo_f429zi: Fix arduino header pin D4
|
2020-11-19 12:40:20 +01:00 |
nucleo_f446re
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_f746zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f756zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_f767zi
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_g071rb
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_g431rb
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_g474re
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_h723zg
|
boards: nucleo_h7: Remove --use-elf runner instruction
|
2020-12-03 11:33:20 -05:00 |
nucleo_h743zi
|
boards: define flash partitions for nucleo_h743zi
|
2020-12-14 16:47:05 +01:00 |
nucleo_h745zi_q
|
boards: nucleo_h7: Remove --use-elf runner instruction
|
2020-12-03 11:33:20 -05:00 |
nucleo_l4r5zi
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l011k4
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l031k6
|
boards: arm: add support for nucleo-l031k6 board
|
2020-11-13 10:01:06 -06:00 |
nucleo_l053r8
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l073rz
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l152re
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
nucleo_l432kc
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l452re
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l476rg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l496zg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nucleo_l552ze_q
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
nucleo_wb55rg
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
nuvoton_pfm_m487
|
board: arm: add support for nuvoton pfm m487
|
2020-07-01 21:09:25 +02:00 |
olimex_stm32_e407
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimex_stm32_h103
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimex_stm32_h407
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimex_stm32_p405
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
olimexino_stm32
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
particle_argon
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
particle_boron
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
particle_xenon
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
pico_pi_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
pinetime_devkit0
|
boards: arm: pinetime_devkit0: Fix docs and config
|
2020-11-17 16:37:28 -05:00 |
pinnacle_100_dvk
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
qemu_cortex_a53
|
qemu_cortex_a53: Get SRAM info from DTS
|
2020-12-05 10:24:54 -05:00 |
qemu_cortex_m0
|
sys: util: Replace MIN(MAX(a, b), c) with CLAMP
|
2020-11-05 12:12:17 +01:00 |
qemu_cortex_m3
|
boards: centralize QEMU icount management
|
2020-06-24 20:28:36 -04:00 |
qemu_cortex_r5
|
boards/qemu_cortex_r5: Adjust clock rates
|
2020-10-29 07:39:39 -04:00 |
quick_feather
|
boards: add EOS S3 Quick Feather board
|
2020-09-04 14:48:49 -04:00 |
rak5010_nrf52840
|
boards: arm: nordic: rakwireless Introduce rak5010_nrf52840 board
|
2020-12-07 14:51:28 -06:00 |
reel_board
|
boards: reel_board: Add defaults for LVGL Kconfig
|
2020-12-14 11:22:06 +01:00 |
ruuvi_ruuvitag
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
sam4e_xpro
|
boards: arm: sam4: Enable bossac bootloader runner
|
2020-12-07 09:11:34 -06:00 |
sam4l_ek
|
boards: arm: sam4l_ek: Enable gpio tests
|
2020-12-02 11:48:43 -06:00 |
sam4s_xplained
|
boards: arm: sam4: Enable bossac bootloader runner
|
2020-12-07 09:11:34 -06:00 |
sam_e70_xplained
|
boards: arm: enable HW stack protection by default on Atmel boards
|
2020-10-16 10:07:20 +02:00 |
sam_v71_xult
|
boards: arm: enable HW stack protection by default on Atmel boards
|
2020-10-16 10:07:20 +02:00 |
seeeduino_xiao
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
segger_trb_stm32f407
|
boards: arm: Add support for SEGGER TRB STM32F407
|
2020-10-06 12:17:26 -04:00 |
sensortile_box
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
serpente
|
tests/samples: add samples for Serpente board
|
2020-09-04 09:25:02 -05:00 |
steval_fcu001v1
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32_min_dev
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f0_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f3_disco
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32f4_disco
|
boards: stm3f4_disco: Fix button gpio config
|
2020-11-30 15:51:07 -06:00 |
stm32f030_demo
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f072_eval
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f072b_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f103_mini
|
boards: arm: Add stm32f103_mini board
|
2020-12-03 10:54:38 -06:00 |
stm32f411e_disco
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32f412g_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f429i_disc1
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f469i_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f723e_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32f746g_disco
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32f769i_disco
|
boards: stm32f769i_disco: Add SDMMC Support
|
2020-11-18 14:33:16 -05:00 |
stm32g0316_disco
|
drivers: gpio: stm32: use generic LL headers
|
2020-11-30 15:50:03 +01:00 |
stm32h747i_disco
|
boards: stm32h747i_disco: Assign usart8 to m4 target
|
2020-12-03 11:33:20 -05:00 |
stm32l1_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32l476g_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32l496g_disco
|
boards: arm: update pwm signals on all STM32 based boards
|
2020-11-09 16:04:24 -06:00 |
stm32l562e_dk
|
boards: stm32l562e_dk: Fix inverted GPIO flags for user LEDs
|
2020-12-14 13:16:10 -05:00 |
stm32mp157c_dk2
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32vl_disco
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm3210c_eval
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
stm32373c_eval
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
thingy52_nrf52832
|
runners: nrfjprog: boilerplate and recover rework
|
2020-12-09 15:00:24 -06:00 |
twr_ke18f
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
twr_kv58f220m
|
boards: arm: remove non-existing doc link from partition definitions
|
2020-10-27 15:01:19 -04:00 |
udoo_neo_full_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
usb_kw24d512
|
dts: clocks: kinetis: set pllfll and er32k clock settings from dts
|
2020-09-29 14:05:50 -05:00 |
v2m_beetle
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
v2m_musca
|
arm: v2m_musca: Mark Musca-A board support deprecated for 2.6.0
|
2020-10-21 07:23:22 -05:00 |
v2m_musca_b1
|
boards: Use tfm target properties for executable paths
|
2020-12-14 11:24:16 +01:00 |
warp7_m4
|
device: Const-ify all device driver instance pointers
|
2020-09-02 13:48:13 +02:00 |
waveshare_open103z
|
boards: stm32: Remove pinmux.c files
|
2020-11-03 11:11:04 +01:00 |
xmc45_relax_kit
|
boards: arm: xmc45_relax_kit: minor doc fixes
|
2020-06-02 15:14:45 +02:00 |
index.rst
|
|
|