| .. |
|
CMakeLists.txt
|
drivers: add the ch32v00x USART driver
|
2024-05-17 19:44:46 +02:00 |
|
Kconfig
|
drivers: add the ch32v00x USART driver
|
2024-05-17 19:44:46 +02:00 |
|
Kconfig.altera
|
drivers: serial: uart_altera: add driver
|
2023-02-23 09:26:33 +01:00 |
|
Kconfig.altera_jtag
|
drivers: serial: uart_altera_jtag: enhancement
|
2023-01-27 14:24:43 -05:00 |
|
Kconfig.apbuart
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.b91
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.bcm2711
|
boards: arm64: add support for Raspberry Pi 4 Model B
|
2023-09-28 13:40:45 +02:00 |
|
Kconfig.bt
|
serial: bt: Set configurable options for the NUS Work-queue
|
2024-05-13 16:17:58 -04:00 |
|
Kconfig.cc13xx_cc26xx
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.cc32xx
|
drivers: serial: cc32xx: add support for pinctrl
|
2023-06-17 07:55:43 -04:00 |
|
Kconfig.cdns
|
drivers: serial: Add Driver for CDNS UART IP6528
|
2022-12-12 12:19:35 -05:00 |
|
Kconfig.cmsdk_apb
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.efinix_sapphire
|
drivers: serial: add uart_efinix_sapphire initial version
|
2023-06-27 12:09:57 +00:00 |
|
Kconfig.emul
|
drivers: serial: correct spelling
|
2024-01-13 00:24:36 +00:00 |
|
Kconfig.ene
|
drivers: uart: initial device driver for ENE KB1200
|
2024-03-15 09:39:48 +00:00 |
|
Kconfig.esp32
|
soc: xtensa,riscv: esp32xx: refactor folder structure
|
2023-07-25 18:12:33 +02:00 |
|
Kconfig.gd32
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.gecko
|
hwmv2: Introduce Hardware model version 2 and convert devices
|
2024-03-02 16:56:33 -05:00 |
|
Kconfig.hostlink
|
drivers: serial: add virtual uart over ARC hostlink channel
|
2023-03-17 11:49:02 +01:00 |
|
Kconfig.ifx_cat1
|
drivers: serial: Add Infineon CAT1 UART driver
|
2023-03-01 11:44:57 +01:00 |
|
Kconfig.imx
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.intel_lw
|
drivers: serial: uart_intel_lw: add driver
|
2023-10-21 11:54:23 +02:00 |
|
Kconfig.it8xxx2
|
drivers/serial: ns16550: Add high speed baud rate support for IT8XXX2
|
2023-10-20 14:56:06 +02:00 |
|
Kconfig.leuart_gecko
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.litex
|
drivers: serial: liteuart: Enable interrupt driven mode
|
2024-02-15 09:19:57 +01:00 |
|
Kconfig.lpc11u6x
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.mcux
|
drivers: uart_mcux: Do not select async support
|
2023-05-02 21:02:43 +02:00 |
|
Kconfig.mcux_flexcomm
|
drivers: uart_mcux_flexcomm: Merge conditions for enabling ISR
|
2023-07-06 11:48:49 +02:00 |
|
Kconfig.mcux_iuart
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.mcux_lpsci
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.mcux_lpuart
|
soc: nxp: Select the MFD Kconfig when LPFlexcomm is enabled
|
2024-04-02 21:00:24 -04:00 |
|
Kconfig.miv
|
drivers: serial: uart_miv: Disable SERIAL_SUPPORT_INTERRUPT
|
2023-05-08 16:59:21 -04:00 |
|
Kconfig.msp432p4xx
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.native_posix
|
drivers/serial native: Replace native_posix with native_sim in comments
|
2023-12-07 10:39:31 +00:00 |
|
Kconfig.native_tty
|
uart_native_tty: Emulate an interrupt driven uart
|
2024-02-27 14:49:02 +01:00 |
|
Kconfig.neorv32
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.npcx
|
drivers: uart: npcx: add asychronous API support
|
2024-04-26 16:13:25 +02:00 |
|
Kconfig.nrfx
|
drivers: serial: nrfx: Allow new UARTE instances to be used
|
2024-02-02 16:40:11 +01:00 |
|
Kconfig.nrfx_uart_instance
|
drivers: serial: nrfx: Update Kconfig dependencies for RX cache
|
2024-05-13 16:05:39 -04:00 |
|
Kconfig.ns16550
|
drivers: uart: uart_ns16550: Enable Async operations using DMA
|
2023-11-22 17:31:08 +01:00 |
|
Kconfig.numaker
|
drivers: serial: support for Nuvoton numaker series UART
|
2023-06-21 09:26:00 +00:00 |
|
Kconfig.numicro
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.nxp_s32
|
drivers: select nocache only when supported
|
2023-09-26 15:09:51 +02:00 |
|
Kconfig.opentitan
|
drivers: serial: Add support for OpenTitan serial UART
|
2023-01-27 19:25:26 +09:00 |
|
Kconfig.pl011
|
drivers: serial: rpi_pico: Migrate to pl011 driver
|
2024-04-10 10:01:25 +02:00 |
|
Kconfig.psoc6
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.ql_usbserialport_s3b
|
drivers: pinctrl: add driver for EOS S3
|
2023-07-26 14:59:59 +02:00 |
|
Kconfig.rcar
|
drivers: serial: add support of hscif driver for RCar boards
|
2024-02-26 11:34:16 +00:00 |
|
Kconfig.renesas_ra
|
drivers: serial: Rename renesas ra driver
|
2024-01-29 11:32:46 +01:00 |
|
Kconfig.rpi_pico
|
drivers: serial: rpi_pico: Migrate to pl011 driver
|
2024-04-10 10:01:25 +02:00 |
|
Kconfig.rtt
|
serial: rtt: select SERIAL_SUPPORT_ASYNC
|
2023-03-30 09:51:18 +02:00 |
|
Kconfig.rv32m1_lpuart
|
drivers: all: rv32m1: remove conditional support for pinctrl
|
2023-04-24 13:34:22 +02:00 |
|
Kconfig.rzt2m
|
drivers: pinctrl: add RZT2M driver
|
2023-11-15 11:41:35 +01:00 |
|
Kconfig.sam0
|
uart_sam0: don't consume CONFIG_UART_ASYNC_API directly.
|
2023-08-21 17:15:29 +02:00 |
|
Kconfig.sedi
|
drivers: serial: Add Intel SEDI driver
|
2023-07-28 17:49:09 +02:00 |
|
Kconfig.sifive
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.smartbond
|
drivers: serial: Smartbond: add support RX line wakeup
|
2024-05-12 17:03:17 -04:00 |
|
Kconfig.stellaris
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.stm32
|
driver: serial: stm32u5: DMAT Errata behavior valid only on some SoCs
|
2023-11-21 15:49:57 +01:00 |
|
Kconfig.test
|
drivers: serial: serial_test: Move ring buf dep to Kconfig
|
2023-09-28 16:38:30 -04:00 |
|
Kconfig.uart_sam
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.usart_sam
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.wch_usart
|
drivers: add the ch32v00x USART driver
|
2024-05-17 19:44:46 +02:00 |
|
Kconfig.xec
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.xen
|
drivers: serial: add missed binding for xen dom0 consoleio driver
|
2024-01-30 18:52:13 -05:00 |
|
Kconfig.xlnx
|
drivers: serial: Update drivers to use devicetree Kconfig symbol
|
2022-07-21 10:29:06 +02:00 |
|
Kconfig.xmc4xxx
|
drivers: serial: xmc4xxx: Fix Kconfig help entry
|
2023-02-21 21:15:53 +01:00 |
|
leuart_gecko.c
|
soc: arm: silabs: remove soc_gpio_configure wrapper
|
2022-12-20 22:50:19 +01:00 |
|
serial_esp32_usb.c
|
soc: esp32s3: add esp32s3_appcpu for AMP support
|
2023-09-27 12:07:21 +02:00 |
|
serial_test.c
|
drivers: serial: serial_test.c: Patch 64-bit incompat
|
2023-09-28 16:38:30 -04:00 |
|
uart_altera.c
|
serial: CONFIG_UART_USE_RUNTIME_CONFIGURE on API for cfg funcs
|
2023-07-21 17:46:12 -04:00 |
|
uart_altera_jtag.c
|
drivers: serial: uart_altera_jtag: enhancement
|
2023-01-27 14:24:43 -05:00 |
|
uart_apbuart.c
|
drivers/apbuart: correct the baud formula
|
2023-03-27 22:15:33 +00:00 |
|
uart_async_rx.c
|
drivers: serial: uart_async_rx: Fix uart_async_rx_reset function
|
2024-04-16 09:07:55 +02:00 |
|
uart_async_to_irq.c
|
drivers: serial: uart_async_to_irq: Move resetting to disabling function
|
2024-04-16 09:07:55 +02:00 |
|
uart_b91.c
|
drivers: serial: b91: add missing RISC-V PLIC header
|
2024-01-15 09:58:03 +01:00 |
|
uart_bcm2711.c
|
boards: arm64: add support for Raspberry Pi 4 Model B
|
2023-09-28 13:40:45 +02:00 |
|
uart_bt.c
|
serial: bt: Set configurable options for the NUS Work-queue
|
2024-05-13 16:17:58 -04:00 |
|
uart_cc13xx_cc26xx.c
|
drivers: serial: uart_cc13xx_cc26xx: fix race
|
2023-09-08 09:26:34 +02:00 |
|
uart_cc32xx.c
|
drivers: serial: cc32xx: add support for pinctrl
|
2023-06-17 07:55:43 -04:00 |
|
uart_cdns.c
|
drivers: serial: Add Driver for CDNS UART IP6528
|
2022-12-12 12:19:35 -05:00 |
|
uart_cdns.h
|
drivers: serial: correct spelling
|
2024-01-13 00:24:36 +00:00 |
|
uart_cmsdk_apb.c
|
drivers: serial: cmsdk_apb: fix irq_rx_ready deviation
|
2023-08-07 12:01:25 -04:00 |
|
uart_efinix_sapphire.c
|
drivers: serial: add uart_efinix_sapphire initial version
|
2023-06-27 12:09:57 +00:00 |
|
uart_emul.c
|
drivers: serial: emul: Make fifo_read() respect size
|
2024-02-07 12:52:43 -06:00 |
|
uart_ene_kb1200.c
|
drivers: uart: initial device driver for ENE KB1200
|
2024-03-15 09:39:48 +00:00 |
|
uart_esp32.c
|
Driver: Add pin inversion to Esp32 Uart
|
2024-05-14 18:21:27 -04:00 |
|
uart_gecko.c
|
drivers: uart: gecko: add support for efr32xg24
|
2023-04-04 13:34:45 +02:00 |
|
uart_handlers.c
|
syscall: rename Z_OOPS -> K_OOPS
|
2023-11-03 11:46:52 +01:00 |
|
uart_hostlink.c
|
drivers: serial: correct spelling
|
2024-01-13 00:24:36 +00:00 |
|
uart_hvc_xen.c
|
xen: change HVM functions signature to run it for other domains
|
2023-09-15 11:15:00 +01:00 |
|
uart_hvc_xen_consoleio.c
|
drivers: serial: add missed binding for xen dom0 consoleio driver
|
2024-01-30 18:52:13 -05:00 |
|
uart_ifx_cat1.c
|
drivers: cat1: Updates to support latest version of HAL/PDL
|
2023-09-01 09:52:25 +02:00 |
|
uart_imx.c
|
include: add missing zephyr/irq.h include
|
2022-10-17 22:57:39 +09:00 |
|
uart_intel_lw.c
|
drivers: serial: uart_intel_lw: add driver
|
2023-10-21 11:54:23 +02:00 |
|
uart_ite_it8xxx2.c
|
drivers: serial: ite_it8xxx2: add a dedicated priority symbol
|
2023-05-26 13:51:08 -04:00 |
|
uart_liteuart.c
|
drivers: serial: liteuart: add missing include
|
2024-01-19 15:13:53 +00:00 |
|
uart_lpc11u6x.c
|
modules: cmsis: move glue code to modules/cmsis
|
2023-08-24 13:20:21 +02:00 |
|
uart_lpc11u6x.h
|
drivers: serial: lpc11u6x: Remove DT_LABEL usage
|
2022-06-30 10:32:33 +02:00 |
|
uart_mchp_xec.c
|
serial: mchp_xec: fix PM dependencies in driver
|
2023-11-01 11:18:07 +00:00 |
|
uart_mcux.c
|
drivers: uart_mcux: Do not enable and disable the transmitter
|
2023-05-16 12:08:32 +02:00 |
|
uart_mcux_flexcomm.c
|
dma: Fix error_callback enable/disable confusion
|
2024-04-11 17:08:10 -04:00 |
|
uart_mcux_iuart.c
|
drivers: serial: uart_mcux_iuart: Add parity bit handling
|
2023-09-30 18:45:34 +02:00 |
|
uart_mcux_lpsci.c
|
include: add missing zephyr/irq.h include
|
2022-10-17 22:57:39 +09:00 |
|
uart_mcux_lpuart.c
|
drivers: serial: mcux lpuart add (tx/rx)invert and single wire
|
2024-05-10 18:25:03 -04:00 |
|
uart_miv.c
|
soc: riscv: microchip_miv: miv: move MIV_UART_0_LINECFG to driver
|
2024-01-19 15:13:53 +00:00 |
|
uart_msp432p4xx.c
|
include: add missing zephyr/irq.h include
|
2022-10-17 22:57:39 +09:00 |
|
uart_native_ptty.c
|
drivers serial native ptty: Split in top and bottom
|
2023-07-10 09:53:22 +02:00 |
|
uart_native_ptty_bottom.c
|
drivers uart_native_ptty: Set standard source macro appropriately
|
2024-01-26 07:48:55 -05:00 |
|
uart_native_ptty_bottom.h
|
drivers serial native ptty: Split in top and bottom
|
2023-07-10 09:53:22 +02:00 |
|
uart_native_tty.c
|
driver: uart: native: fix stop_bits/databits mix
|
2024-05-14 18:19:11 -04:00 |
|
uart_native_tty_bottom.c
|
driver: uart: native: fix stop_bits/databits mix
|
2024-05-14 18:19:11 -04:00 |
|
uart_native_tty_bottom.h
|
uart_native_tty: Emulate an interrupt driven uart
|
2024-02-27 14:49:02 +01:00 |
|
uart_neorv32.c
|
drivers: serial: neorv32: add missing include
|
2024-01-19 15:13:53 +00:00 |
|
uart_npcx.c
|
drivers: uart: npcx: extend the UART baudrate support
|
2024-04-26 16:13:25 +02:00 |
|
uart_nrfx_uart.c
|
drivers: serial: uart_nrfx_uart: fix NRFX_WAIT_FOR result type
|
2023-09-14 16:51:32 -05:00 |
|
uart_nrfx_uarte.c
|
coding guidelines: comply with MISRA Rule 20.9
|
2024-05-06 17:30:26 +01:00 |
|
uart_nrfx_uarte2.c
|
drivers: serial: nrfx_uarte2: Fix error event not being sent
|
2024-04-18 11:14:58 +02:00 |
|
uart_ns16550.c
|
coding guidelines: comply with MISRA Rule 12.1.
|
2024-05-13 16:05:53 -04:00 |
|
uart_ns16550.h
|
uart: ns16550: move command macro to public header
|
2022-11-10 22:40:21 -05:00 |
|
uart_numaker.c
|
drivers: serial: support for Nuvoton numaker series UART
|
2023-06-21 09:26:00 +00:00 |
|
uart_numicro.c
|
drivers: serial: numicro: fix poll_in function
|
2022-12-08 18:46:33 +01:00 |
|
uart_nxp_s32_linflexd.c
|
drivers: uart_nxp_s32_linflexed: update to RTD 1.0.0
|
2023-11-16 09:28:16 +01:00 |
|
uart_nxp_s32_linflexd.h
|
serial: nxp_s32: use instance-based DT macros
|
2023-11-08 10:06:46 +01:00 |
|
uart_opentitan.c
|
drivers: serial: opentitan: remove redundant include
|
2024-01-19 15:13:53 +00:00 |
|
uart_pipe.c
|
drivers: serial: pipe: init device at compile time and check if ready
|
2022-08-19 11:51:26 +02:00 |
|
uart_pl011.c
|
drivers: serial: rpi_pico: Migrate to pl011 driver
|
2024-04-10 10:01:25 +02:00 |
|
uart_pl011_ambiq.h
|
drivers: serial: pl011: Add support for Ambiq Apollo3 SoCs UART
|
2024-05-07 18:57:19 +02:00 |
|
uart_pl011_raspberrypi_pico.h
|
drivers: serial: rpi_pico: Migrate to pl011 driver
|
2024-04-10 10:01:25 +02:00 |
|
uart_pl011_registers.h
|
drivers: serial: pl011: add definitions for CLKEN/CLKSEL registers
|
2023-08-04 10:48:58 +02:00 |
|
uart_psoc6.c
|
drivers: migrate includes to <zephyr/...>
|
2022-05-06 19:58:21 +02:00 |
|
uart_ql_usbserialport_s3b.c
|
device: remove redundant init functions
|
2023-04-19 10:00:25 +02:00 |
|
uart_ql_usbserialport_s3b.h
|
drivers: serial: correct spelling
|
2024-01-13 00:24:36 +00:00 |
|
uart_rcar.c
|
drivers: use DT_INST_NODE_HAS_COMPAT
|
2024-04-26 20:04:38 +01:00 |
|
uart_renesas_ra.c
|
drivers: serial: ra: reduce uart baud rate error
|
2024-02-04 19:55:45 -06:00 |
|
uart_rpi_pico_pio.c
|
drivers: serial: Added rpi_pico driver over PIO
|
2023-04-25 13:12:02 +02:00 |
|
uart_rtt.c
|
drivers: serial: uart_rtt: fix multi-channel
|
2023-02-25 06:55:58 -05:00 |
|
uart_rv32m1_lpuart.c
|
drivers: all: rv32m1: remove conditional support for pinctrl
|
2023-04-24 13:34:22 +02:00 |
|
uart_rzt2m.c
|
drivers: serial: correct spelling
|
2024-01-13 00:24:36 +00:00 |
|
uart_rzt2m.h
|
drivers: serial: add RZT2M uart driver
|
2023-11-15 11:41:35 +01:00 |
|
uart_sam.c
|
drivers: serial: sam u(s)art: correct interpretation of RXRDY flag
|
2024-01-16 10:01:17 +01:00 |
|
uart_sam0.c
|
drivers: use DT_INST_PROP over DT_INST_PROP_OR if possible
|
2024-01-30 00:26:58 +00:00 |
|
uart_sedi.c
|
drivers: serial: correct spelling
|
2024-01-13 00:24:36 +00:00 |
|
uart_sifive.c
|
include: add missing zephyr/irq.h include
|
2022-10-17 22:57:39 +09:00 |
|
uart_smartbond.c
|
drivers: serial: Smartbond: add support DTR line wakeup
|
2024-05-12 17:03:17 -04:00 |
|
uart_stellaris.c
|
include: add missing zephyr/irq.h include
|
2022-10-17 22:57:39 +09:00 |
|
uart_stm32.c
|
drivers: uart_stm32: add DCache support in async DMA mode
|
2024-05-13 16:09:20 -04:00 |
|
uart_stm32.h
|
drivers: uart: stm32: Allow enabling FIFO mode
|
2023-12-01 10:52:49 +00:00 |
|
uart_wch_usart.c
|
drivers: add the ch32v00x USART driver
|
2024-05-17 19:44:46 +02:00 |
|
uart_xlnx_ps.c
|
drivers/serial/uart_xlnx_ps.c: uart_xlnx_ps_driver_api is defined twice
|
2023-08-31 20:18:56 +02:00 |
|
uart_xlnx_uartlite.c
|
serial: xilinx: uartlite: Fix infinite spin in xlnx_uartlite_fifo_read
|
2023-03-20 10:21:37 +01:00 |
|
uart_xmc4xxx.c
|
serial: allow callback setting to be exclusive
|
2023-07-18 11:13:02 +00:00 |
|
usart_gd32.c
|
treewide: Update clock control API usage
|
2023-04-05 10:55:46 +02:00 |
|
usart_sam.c
|
drivers: serial: sam u(s)art: correct interpretation of RXRDY flag
|
2024-01-16 10:01:17 +01:00 |
