In case of default top value, driver was calling top value
callback only on the first period. This was not expected behavior.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Tests i.MX EPIT timer peripheral driver. Since it supports zero number
of channel alarms, some tests had to be adjusted to look at the
number of channel alarms supported first.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Enabled EPIT (Enhanced Periodic Interrupt Timer) in Cortex-M4 core
of Udoo Neo Full board so the counter API could be used there.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add EPIT (Enhanced Periodic Interrupt Timer) peripheral support
for i.MX6SoloX soc.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add shim driver for i.MX EPIT (Enhanced Periodic Interrupt Timer)
peripheral which can be used for i.MX6SoloX, i.MX7D and other i.MX socs.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Renamed:
- counter_set_wrap to counter_set_top_value
- counter_get_wrap to counter_get_top_value
- counter_get_max_wrap to counter_get_max_top_value
Updated nRF implementations and counter test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modify alarm callback to return user_data and channel_id.
Set_alarm and disable_alarm updated accordingly. Renamed
counter_*_ch_alarm to counter_*_channel_alarm. Updated test
and nrf implementations.
Updated doxygen comments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
nrf_rtc_timer was selecting counter RTC1 instance even though it
is not using counter API at all.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
counter_callback_t has been previously prefixed with __deprecated
but it is used in prototype of deprecated function (counter_set_alarm).
It seems that compiler generates the warning even though function is
not used. Removed __deprecated prefix from the typedef, keeping it for
the function only.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removing duplicates in selects for config SOC_NRF52832 and
SOC_NRF52840. Duplicates were unexpected merge artifacts.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Upstream trunk moved to a newer Nordic HAL that changed file and
constant names.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The system timer uses RTC1, but does not implement the counter API with
it. Instead of auto-enabling the counter API on the system timer make
the two conflict until/unless both APIs are supported by the peripheral.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Using `COUNTER_2_NAME` when all other properties are
`COUNTER_TIMER2_foo` is confusing. Make the names consistent.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
RTC1 (not RTC0) is excluded because it is used as the system clock.
Also document that TIMER0 and RTC0 may be rejected when CONFIG_BT_LL_SW
is enabled.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Deprecating counter legacy API and renaming new counter_set_alarm
to coutner_set_ch_alarm. Deprecating rtc API and modifying rtc
API to call new counter API (compatibility layer).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
counter.h and rtc.h API's share almost the same functionality.
They are unified as a new counter.h. rtc.h will be deprecated.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add driver support for kinetis ID device.
The length depends on the SoC.
`SIM_GetUniqueId` was not used because the struct would reorder
the ID and makes the driver more complicated because the length
of the struct depends on the SoC.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The test assumes that the last to IRQ numbers will be free, this isn't a
valid assumption and now that we detect multiple ISRs registering for
the some IRQ line, we see failures because of this assumption on some
platforms. Exclude those platforms from this test for the time being.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds device tree bindings and nodes for the rocktech lcd module used on
imx rt boards. The use of port, endpoint, and remote-endpoint properties
follow what is currently done in linux, but they are not yet used in
zephyr because some additional plumbing is needed in the
extract_dts_includes.py script.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds board configurations to support the mimxrt1050_evk and
mimxrt1060_evk boards in the lvgl sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes the lvgl sample to use the same display device name as the lvgl
library rather than a hardcoded string.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables the mcux elcdif shim driver and clocks on imx rt socs when the
display driver interface is enabled.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a shim layer around the mcux elcdif driver to adapt it to the
zephyr display interface. Although the hardware and underlying mcux sdk
driver can support additional configurations, some shortcuts are
currently made in the shim that force a given pixel format, lcd data
bus width, and signal polarity. This works with the rocktech lcd module
used on imx rt boards, but will need to be updated for other display
panels.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a new entry in the pixel format enum for RGB 565. This will be used
for the lcd display on the mimxrt1050_evk and mimxrt1060_evk boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds device tree bindings for the imx enhanced LCD interface (eLCDIF)
controller. The compatible is reused from linux.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The Adafruit SAMD51 boards use a combined BOSSA / U2F bootloader that
resides in the first 16 KiB. Add support for pulling the application
partition offset from the configuration and using that to offset where
the binary gets flashed.
Signed-off-by: Michael Hope <mlhx@google.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Always link firmware built for nrf9160_pca10090ns into the
code-partition defined in DT, regardless.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Introduce BOARD_NRF9160_PCA10090NS to differentiate between
secure and non-secure board variants.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
In case of !XIP, set defaults for CONFIG_FLASH_SIZE and
CONFIG_FLASH_BASE_ADDRESS in Kconfig.
Fixes: #13113
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
With this commit, it is now possible that if (for e.g.) lightness
transition is interrupted by temperature transition (which could
be instantaneous or non-instanstaneous) then as soon as temperature
transition get over, then algorithm would achieve target value
of lightness.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Add a sample demonstrating usage of the APA102 driver, heavily based
on led_ws2812. Tested on nucleo_l432kc with an Adafruit DotStar strip.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
There is a apa102 driver, and an upcomming patch will provide a sample
for using it, but let's keep the bitbang version which is intersting.
Signed-off-by: Marc Pignat <marc@absintheaudio.com>
