Add a conditional compile around data in `cdns_i3c_irq_handler` to
prevent a warning when building controller only and without ibi.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This moves nvmem docs to a better suited home since we already have
a section for all things storage.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This moves fs docs to a better suited home since we already have
a section for all things storage.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This moves retention into a better suited home since we already have
a section for all things storage.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Changed ACTIVE_HIGH to ACTIVE_LOW, for LEDs green and blue in c33.dts file
These appear to have been cofigured wrong from the beginning.
Signed-off-by: Bogdan Ivanus <b.ivanus@arduino.cc>
Enable QEMU emulation for the AN386, which gives a QEMU platform for the
cortex-m4 architecture. This allows testing of hardware floating point
operations.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Replace zephyr_compile_definitions with zephyr_library_compile_definitions
to avoid setting options globally.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Extends the devicetree library test to exercise the hwspinlock dt spec
macros and detect the context initializer build warning that was fixed
in commit 8b208b0d5a. Previously the build
warning wasn't reproducible in-tree.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
There can be a race conditon where another interrupt fires while it
is in the callback, but then the interrupt is cleared towards the
end of the interrupt. Clear the interrupts it intends to service
at the beginning of the ISR.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
commit a763207962 ("arch: arm: dwt: use the cmsis_6 macro
unconditionally") use cmsis_6 macro unconditionally, we can use DCB
instead of CoreDebug macro unconditionally.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
commit a763207962 ("arch: arm: dwt: use the cmsis_6 macro
unconditionally") use cmsis_6 macro unconditionally, we can use DCB
instead of CoreDebug macro unconditionally.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
commit a763207962 ("arch: arm: dwt: use the cmsis_6 macro
unconditionally") use cmsis_6 macro unconditionally, we can use DCB
instead of CoreDebug macro unconditionally.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
commit a763207962 ("arch: arm: dwt: use the cmsis_6 macro
unconditionally") use cmsis_6 macro unconditionally, we can use DCB
instead of CoreDebug macro unconditionally.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Add a new function to free an mbedtls_shim session:
'mbedtls_free_session()'. Together with 'mbedtls_get_unused_session()',
these will be the only entry points to acquire/release sessions.
In this way it's easier to ensure that the mutex is properly held while
setting the 'in_use' parameter.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Move mbedtls_get_unused_session_index() at the top of the file and leave
cipher and hash functions below.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Imply XIP from the SoC config to make XIP the default to match the
behaviour between Cortex-M33 and Hazard3 variants.
This fixes cbe6a716d3, which stopped
selecting XIP at the SoC level.
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
Use net_buf_tail() instead of __buf for proper buffer positioning.
Add null check and error handling for nocache buffer allocation.
Only copy data for OUT transfers during buffer setup.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Differentiating between IN and OUT transfers for proper buffer setup.
For OUT transfers: use existing data from buf->data with buf->len.
For IN transfers: use available space from net_buf_tail() with tailroom.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Make sure that arch.mode is set with appropriate flags before setting up
the privileged stack start.
Fixes#99895
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Introduce BUILD_ASSERT checks in the UDP transport implementation to
ensure the configured maximum address size is large enough for the
enabled IP families.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add guidelines in Kconfig explaining the minimum required
MQTT_SN_LIB_MAX_ADDR_SIZE for UDP transport and IPv4 and or IPv6. Also
explain when this value might need to be changed.
Use these values to provide a sane default for IPv4 and IPv6.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This update modify some ROM reentrant calls to weak in order
to use the one provided in libc.
This also remove the usage of logging that requires locking
handling before scheduler is running.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Completely overhaul the documentation landing page to improve user
experience and navigability.
Key changes:
- Replace the static grid list with a modern, responsive HTML/CSS layout.
- Introduce "Persona" cards (App Developer, Hardware Engineer, Product
Maker) to guide users to relevant sections faster.
- Highlight key reference resources (API, Kconfig, DeviceTree, ...) in a
dedicated reference section.
- Call out "How to contribute" with a dedicated card.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This is done to avoid this error
Too many thread objects (38)
Increase CONFIG_MAX_THREAD_BYTES to 5
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The platform_allow line in common: overrides the setting in
individual tests, so add the platform_allow line to each test
separately so that OpenThread tests are run with proper platform.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Some of the socket calls still used POSIX symbols, replace these
by native Zephyr network API calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add myself (alxelax) as Bluetooth Qualification
collaborator. The main reason is as Bluetooth Mesh
collaborator would like to follow up qualification tool
updates since it impacts Mesh qualification too.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Other variants of arch.interrupt test pass on this platform,
but arch.shared_interrupt.lto asserts in test_isr_offload_job_identi.
The issue was reported in #98658.
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Update Espressif flash related snippets:
* add support for ESP32-H2
* add 2M,64M and 128M flash support
* change included overlays structure
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Using the `gen_ftab.py` script, we can retrieve the current image
distribution information from the device tree and generate the
corresponding `ftab.bin` file. This eliminates the need to burn an
additional `ftab.bin` externally before running the device
Signed-off-by: Haoran Jiang <halfsweet@halfsweet.cn>
In addition to Zephyr's default build artifacts, other build processes
may generate additional images. Therefore, we have added the
`--flash-file` parameter to flash these supplementary images
Signed-off-by: Haoran Jiang <halfsweet@halfsweet.cn>
