The reset function is originally designed to have no return value. If
the GPIO toggle fails, there's no indication for failure until I2C
transaction fails. Account for this by adding return value to the reset
function.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
add support for pca9538, pcal9539.
Add support for pcal6408 and pcal6416, which is originally supported
by pcal64xxa driver. These device has the same register layout as
pcal9538 and pcal9539 respectively, which means they can be seamlessly
supported by pca_series driver.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
The only information for 4s-4d-4d, 8s-8s-8s and 8d-8d-8d in the basic flash
parameter table is in DWORD20 with one byte for each of the aforementioned
modes. This one byte is split into two fields that contain that mode's
maximum operation speed with and without data strobe. Unsupported fields
have the value of 0xF. For the mode to be supported, at least one of the
two fields must not be 0xF, so we check the byte against 0xFF.
Signed-off-by: Amneesh Singh <a-singh7@ti.com>
Always install current python dependencies required for CI as part of
setting up the workflow, since the ones pulled in the docker image may
be out of date.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
A bit confused as to how this worked before, maybe the docker image had
pykwalify pre-installed or something, but we do need python dependencies
properly installed to run CI - here this commit is specifically fixing
an issue with jsonschema not being found.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
100 ms is insufficient time enter command mode after `CMUX` on at least
one modem (Telit LE910Cx), and waiting 5 seconds before retrying seems
excessive.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This potentially fixes an issues whereby when sysbuild projects
import dts configuration from images and images are reconfigured,
that sysbuild will needlessly rerun even if the output has not
changed by using a temporary output file and then only updating
the actual file if the contents have changed
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add pinctrl dts node for PIC32CM JH family devices and
update binding file for Microchip Pinctrl Port G1 IP
Signed-off-by: Mohamed Azhar <mohamed.azhar@microchip.com>
Update west.yml file to link hal-microchip which has the
pinmux header files for PIC32CM-JH series
Signed-off-by: Mohamed Azhar <mohamed.azhar@microchip.com>
Add missing const on `struct rtio_iodev *iodev`
sensor_reconfigure_read_iodev(), sensor_stream(),
and sensor_read(), all pass iodev to functions
which accepts struct rtio_iodev as const.
These functions should also be marked const.
Signed-off-by: Anthony Williams <anthony289478@gmail.com>
- Increase codec config metadata size to support long metadata
audio configuration
- Remove invalid check for requested and new BIS sync request
- Delete broadcast sink when sync terminated to prepare for
next sync attempt
- Change supported channel count from 2 to 1 to align with
project configuration and set audio channel to front center
These changes ensure the cap_acceptor sample works correctly
with Google Pixel devices by handling metadata properly and
managing broadcast sink lifecycle appropriately.
Signed-off-by: Chang An <chang.an_1@nxp.com>
Add tickless concept test support for RZ/V2L-SMARC, RZ/A3UL-SMARC
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Select ARM_ARCH_TIMER when RZ_OS_TIMER is not selected
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Add system timer driver support for RZ/V2L, RZ/A3UL
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
drivers: timers: Improve ISR Prototype for Renesas RZ
Convert `gethostname()` from a static inline wrapper to a normal function
with regular linkage.
This change was prompted mainly as housekeeping for #95811, but a
secondary reason was to make this a linkable symbol so that the API works
at a binary level as well (which could be provided by the toolchain as
well).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Bump the revision used for `hal_ti` to one that uses ANSI / ISO C types
when defining `SlNetSock_Timeval_t` instead of relying on non-standard
ways of pulling in POSIX types.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Include `<zephyr/toolchain.h>` to get access to `ARG_UNUSED()` and include
`<zephyr/sys/util.h>` to get access to `MAX()`.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The commit should deal with fixing board's flash memory capacity
as well as updating mcuboot partitioning scheme so that there are no
depedencies with the I-cache controller's peculiarities (that is an image
should be aligned to specific boundaries that is 256kB, 512kB etc).
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
The commit should deal with fixing board's flash memory capacity
as well as updating mcuboot partitioning scheme so that there are no
depedencies with the I-cache controller's peculiarities (that is an image
should be aligned to specific boundaries that is 256kB, 512kB etc).
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should deal with updating the re-configuration of the
I-cache controller when buidling for mcuboot. Previously, the whole
controller was updated, given that a slot entry adheres to controller's
peculiarities (that is an image should be aligned to specific image sizes
i.e. 256kB, 512kB, etc). However, that approach should adversely affect
flash memoy layout. The proposed scheme now imposes that images be aligned
to minimum cache-able area, that is 64KB.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
In HFP PTS, cases run fail with the log 'unsupported unsolicited
format: +BSIR=0' and 'FAIL: Expected to receive +BSIR: 0'.
Fixed issue by changing +BSIR=0 to +BSIR: 0.
Signed-off-by: Jiawei Yang <jiawei.yang_1@nxp.com>
Converting a "pre-west" Zephyr setup is not something we officially
support anymore so drop associated documentation.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
west 0.6.0 and 0.7.0 were released in 2019 and 2020 ; keeping
troubleshooting information for these versions is not needed anymore
(there isn't even a currently maintained LTS that would remotely be
concerned by this).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Not sure why didn't this cause the test to fail, but just for
completeness, align this test suite with dns_unpack_query() change
as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
dns_unpack_query() no longer prepends the unpacked query with extra dot,
therefore LLMNR responder needs to be aligned with this change when
parsing result and preparing response.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
dns_unpack_query() no longer prepends the unpacked query with extra dot,
therefore mDNS responder needs to be aligned with this change when
parsing result and preparing response.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Explicitly cast data->atime to uint32_t to
prevent signed promotion and sign extension
when multiplying with data->again.
Signed-off-by: Manoj Purushothama <hpmanoj@umich.edu>
Downstream toolchains may already define these macros, add guard to
prevent macro redefined errors.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
