This commit includes the following changes:
1. Add top level CMakeLists.txt entry and Kconfig.
2. Add bindings for opamp-controller.
2. Add bindings for nxp,opamp and nxp,opamp_fast.
3. Implemented NXP opamp and opamp_fast device driver.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Support arduino_gpio example for NXP frdm_mcxw23 and mcxw23_evk boards.
Test using tests/drivers/gpio/gpio_basic_api.
Signed-off-by: Allen Zhang <chunfeng.zhang@nxp.com>
Add optional fast-memory-region property to the Ethos-U driver. When
present in the devicetree, the driver passes the region base and size
to ethosu_init(), allowing platforms to use dedicated SRAM for improved
NPU performance.
If the property is not specified, the driver falls back to using NULL/0,
keeping existing behavior unchanged.
Signed-off-by: Johan Alfvén <johan.alfven@arm.com>
Fix inter-operability, when BT_PHY_UPDATE=n the feature bits
contained 2M and Coded PHY when Advertising Extensions where
enabled, and Central devices did not progress with any data
packet transfers when PHY_REQ was rejected as unknown PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
1. the clock-source is wrongly typed as clk-source,
which happen to pass the build and function check.
2. and should use DT_INST_ENUM_IDX for index enumrate
as string.
Signed-off-by: Hake Huang <hake.huang@nxp.com>
Now that the MBOX_STM32_HSEM driver is enabled by default if
present within the device-tree, it is no more necessary to
manually enable it within samples board specific conf files.
Remove as well the CONFIG_LOG_BACKEND_UART since overall
CONFIG_LOG is anyway not enabled in the samples/drivers/mbox
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Default to building the driver if its node is enabled in
the device-tree, avoiding the need to manually set
CONFIG_MBOX_STM32_HSEM.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Updated project configuration for Border Router to include DHCP6_PD
client, DNS upstream resolver and SRP server features
Removed flags set to 'n' and updated Thread version to 1.4
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
- Initialize platform requirements and start OpenThread DHCP6_PD
feature.
- Added initialization logic for DNS upstream resolver.
OTBR message data structure has been updated to store a user data
structure, if needed.
- Added SRP server initialization call.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
These macros provide a way to get the `mount-point` value from
an fstab entry:
- FSTAB_ENTRY_DT_MOUNT_POINT
- FSTAB_ENTRY_DT_INST_MOUNT_POINT
Signed-off-by: James Roy <rruuaanng@outlook.com>
Fix some orphaned NXP files, fix some files being assigned to wrong NXP
area, and remove "NXP Drivers" label which is just confusing people, and
unify all the main NXP areas under one "platform: NXP" label
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add test scenario for a Kconfig option that was recently added to
the mspi_dw driver. Testing it requires performing some transfers
on the MSPI bus with some device, hence flash chip test used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Provide a Kconfig option that allows offloading handling of the SSI
FIFOs, which the driver normally executes in the interrupt handler,
to the system workqueue.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The NRFS GDPWR device driver requires NRFS which requires
multithreading. Add dependency to Kconfig for the device driver
to exclude it when building for single threaded apps like
mcuboot.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Added additional cleanups between tests, which fixed the issue
of a failing testcase on nRF54L15.
Signed-off-by: Michał Bainczyk <michal.bainczyk@nordicsemi.no>
- Fixed pin configuration for nRF54L15 (QDECs can use only port 1)
- Changed the way the test handles testing multiple instances
to make it possible to output quadrature signal to one QDEC
instance at a time.
Signed-off-by: Michał Bainczyk <michal.bainczyk@nordicsemi.no>
Add comprehensive enhancements to the probe-rs runner:
- New parameters: --reset, --protocol, --speed, --verify, etc
- RTT logging support via 'attach' command
- Smart binary format detection with FileType support
- Enhanced debug/debugserver with improved GDB integration
- Conditional reset after flashing instead of always resetting
Maintains upstream compatibility while significantly expanding
probe-rs capabilities for embedded development workflows.
Signed-off-by: Jared Wolff <hello@jaredwolff.com>
Product image from https://learn.adafruit.com/assets/103710
Tested with the command mentioned in the index.rst file.
Compile-testing of the overlay file is done in CI via the
drivers/rtc sample.
Signed-off-by: Jonas Berg <jonas.s.t.berg@gmail.com>
