- Add a new counter driver implementation based on the PDL for
Infineon CAT1B devices. This enables support for hardware
counters on the PSC3M5 platform.
- Add IFX_TCPWM_Counter_DeInit and IFX_TCPWM_Counter_Init
macros to include/zephyr/drivers/timer/ifx_tcpwm.h
and sort all of the macros in that file
Signed-off-by: Yurii Lozynskyi <yurii.lozynskyi@infineon.com>
When handling packets for inputing into packet-sockets, unconditionally
forward them, so that they may be handled by the rest of the network
stack after.
Signed-off-by: Cla Mattia Galliard <clamattia@gmail.com>
Converted `arch-schema.yml`, `board-schema.yml`, and `soc-schema.yml`
from PyYAML format to JSON Schema format, including baking in some of
the validation rules that were deferred to ad hoc Python right into the
schemas (e.g. mutual exclusivity of certain fields).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Including soc.h is causing issues - drop as it's not needed
Fixes e.g. the below:
west build -p -b em_starterkit@2.2.0/emsk_em7d \
tests/drivers/build_all/w1 -T drivers.w1.build
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Allows verify_buf_const() to be compliant with the configuration parameter
CONFIG_I2S_TEST_ALLOWED_DATA_OFFSET to work the same way as verify_buf()
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
This mimics IPC transport behavior where BR/EDR Inquiry events as
well as LE Extended Advertising Report (carring legacy PDU) are
considered discardable.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Users can specify a Zephyr SDK installation directory using the
`ZEPHYR_SDK_INSTALL_DIR` environment variable. This variable must be
taken into account when listing all installed SDKs, such as with the
`west sdk list` command.
Signed-off-by: Thorsten Klein <thorsten.klein@bshg.com>
The heuristics for guessing "best" image file for a given board will now
prefer webp over png over jpg as there is a good chance that when we
need to fall back to _any_ image for the lack of a better match, a webp
image, if one exists, will be the best image to use.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When a board or shield is named boardfoo_is_awesome, we now explicitly
look for images with a name that starts with one of the segments of the
board/shield name ; i.e.: boardfoo_is_awesome.imgext, then
boardfoo_is.imgext, then boardfoo.imgext.
Fixes: zephyrproject-rtos/zephyr#96144
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The transmit functions will return an error code, instead of a boolean
value. To prepare for this, the API calls are temporarily implemented in
two variants, for old and new API declarations.
The presence of new API will be detected by the use of
NRF_802154_TX_FUNCTIONS_RETURN_ERROR_CODE macro, which will be
unconditionally defined by a newer nrf-802154 driver.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
- It's not fully enabled.
- Chrome ISH cannot reach such deep low-power state for current scenarios.
- Chrome ISH's panic info mechanism needs SRAM content kept with ISH
reset, but D0i3 has whole SRAM banks power-off.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
- Add the ISH latest code enhancements for SEDI drivers.
- Adjust PM code directory structure.
- Refactor PM code.
- Build AON code in a dedicated lib libish_aontask.a for easy use in
ish_aon.ld file.
- Seperate one zephyr cmake build file to many for different modules.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
- Add SOC interrupt properties and interrupt-names ("reset_prep", "pcidev",
"pmu2ioapic") to intel_ish5 DTS files so PM IRQs are discoverable via DT.
- Move SEDI PM initialization and IRQ setup into ISH SOC PM init:
- Remove the direct call to sedi_pm_init() from soc_early_init_hook in
soc.c.
Previously SEDI code has those IRQ numbers hard coded and calls Zephyr APIs
to connect IRQs, which should be avoided.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
- Remove per-object AON macros and replace with explicit KEEP entries
referencing libish_aontask.a for .text/.rodata/.data/.bss.
- Introduce __ish_aon_start / __ish_aon_end linker symbols.
- Rename GROUP from AON to ISH_AON for clarity.
It's not good to specify source file names in linker script.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
- cleanup header files included.
- Rename LOG_MODULE_REGISTER from pm_service to ish_pm and use
CONFIG_PM_LOG_LEVEL.
- Guard verbose debug traces so they only print for suspend-to-RAM/long
idle states, reducing runtime noise.
- Promote an unsupported power state message from LOG_DBG to LOG_ERR.
No functional change to power handling; changes are limited to logging
and verbosity control.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Support using FUSE v3, instead of FUSE v2.
FUSE v3 has been out for a couple of years now, so most distributions
have it.
But note the FUSE library (and its v3 branch) is currently unmaintained,
and older distributions do not ship it.
Some Linux distros have transitioned their packages away from fuse2.
Which results in less atention in these distros to fuse2, and therefore
a higher likelyhood that there would be distribution issues with the
corresponding packages.
There is also some likelihood the fuse2 packages may be eventually
droped by some of these.
So let's support either version, with a kconfig adapting to either API
and their quirks.
Note that both the fuse2 and fuse3 library code have quite a few
sideeffects on the process that uses it.
By now we continue defaulting to fuse2 as it is the most common.
But users can select to use the v3 if they have an issue w v2 or want
to start trying out using v3.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Avoid a possible race between the FUSE thread and the Zephyr threads
during init.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
FUSE_INCLUDE_DIRS should be passed to the native_simulator build.
If there is several fuse libraries installed, we need to ensure the
bottom side of the driver is built with the correct include paths.
(These includes are irrelevant for the Zephyr side build)
Support having a list of include paths instead of single one.
Support having a list of libraries to link to instead of a single one.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
A few straightforward cleanups to existing documentation to improve
coverage and properly hide internal macros.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update the timeline so that the release timeline announcement goes out two
weeks prior to rc1. This way developers have more time to ensure that their
features will make it to the next release. Also add a reminder of the
release timeline one week prior to rc1.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Because the PWM module mixes byte and word register together, the driver
adds an assertion check by writing a pattern to the 2-byte register
`PRSC`, reading it back, and performing a comparison. However,
the `PRSC` register cannot be written when the bit 7 (the PWR bit) in
register `PMWCTLn` is set to 1. This commit moves the assertion check to
a proper place to ensure the write is valid.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Testing with external PSRAM memory requires that an extra overlay file
be defined. Twister requires that platform name along with qualifier be
declared.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Select ARM DWT feature to suppress build warning related to null pointer
detection mechanism.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should deal adding missing board settings for da14695_dk_usb
so that the latter gets synchronized with da1469x_dk_pro.
By default, peripheral blocks, not actively referenced, should be disabled
and be enabled by application overlay files.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Add UICR.SECURESTORAGE configuration based on device tree partitions.
Validates partition layout and populates size fields in 1KB units.
Handles missing partitions gracefully.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Update the default memory map to include a `secure_storage_partition`,
which is divided into at most four subpartitions. These will be used to
configure UICR.SECURESTORAGE, if enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
If two pwm_set_pulse_dt calls are put consecutive to each other,
the period has already been configured and they refer to the same module
but different submodule (PWM A & B), the second call fails.
LDOK with ReloadImmediate should result in immediate change of the
buffered registers, but it doesn't seem like that's the case.
To fix this, we busywait on LDOK clearance before setting new pulse values.
Fixeszephyrproject-rtos/zephyr#95653
Signed-off-by: Alejandro Perea <alejandro.perea@classified-cycling.cc>
Fix deleting a key that doesn't exist from writing a new entry to the
filesystem when `CONFIG_ZMS_NO_DOUBLE_WRITE` and
`CONFIG_ZMS_LOOKUP_CACHE` are enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Handle the `bt_le_create_conn_cancel` call in the deferred worker
failing due to insufficient command buffers.
Signed-off-by: Jordan Yates <jordan@embeint.com>
STM32N6 and STM32H7RS have an external NOR flash mounted.
Enabling CONFIG_STM32_MEMMAP is a workaround that helps us avoid dealing
with even and odd addresses during write/read operations
(see the test_read_unaligned_address testcase).
With MEMMAP enabled, we can use memcpy() instead of indirect operations
on the SPI bus for write operations, for example, which is agnostic to
flash even and odd addresses.
Additionally, setting CONFIG_TEST_DRIVER_FLASH_SIZE for STM32H7RS is
needed in the test_get_size testcase.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
In Direct XIP with revert, it should be possible to block confirmation
of the non-active slot, so only a bootable binaries are marked as valid.
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
Removed CMSIS references from wiseconnect CMakeLists
as they are no longer required with UART device runtime
PM. Keeping them adds unnecessary compilation overhead.
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
This commit enables the pm device runtime driver support
for the uart_ns16550 driver (only for devices that have an
associated power domain enabled).
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
1. Added siwx91x power domain node in siwg917.dtsi
2. Updated UART device nodes to reference the newly added power domain.
3. Implemented power domain driver to manage power domain transitions
for the SoC.
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
