Fixes typo in the event name.
Changes the struct to also use _ev instead of _rp as it
is an event and not a response.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The publication period is defined by Steps and Resolution.
At BLE Mesh protocol level, the period is encoded in a byte
where first LSB 6 bits correspond to PerSteps and the last
two to PerRes. There is an issue on how the code at
`subsys/bluetooth/mesh/shell/cfg.c:model_pub_set` is encoding
these two values into the publication period byte.
This is commit fixes issue #87780
Signed-off-by: Raúl Gotor <raulgotor@gmail.com>
Apply the following patches to the v4.1-branch of rust. This fixes an
issue with CI.
349164d630a samples: blinky: Remove incorrect integration platform
b0866632d42 samples/tests: Ensure test/sample names are unique
Signed-off-by: David Brown <david.brown@linaro.org>
If the connection handle given to a Read/Write Authenticated Payload
Timeout HCI command is a CIS or BIS handle, the error returned has to
be BT_HCI_ERR_CMD_DISALLOWED with the new TCRL
Fixes EBQ test failures in HCI/BIS/BI-14-C, HCI/BIS/BI-15-C,
HCI/CIS/BI-20-C and HCI/CIS/BI-22-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
The Nordic nRF54L series ICs use RRAM instead of flash. This implies
that erasing the internal storage before writing the new firmware is not
required anymore (unlike NOR flash, which does).
Note that RRAM on nRF54L devices is not physically paged, and paging is
only artificially provided, with a page size of 4096 bytes, for an easier
transition of nRF52 software to nRF54L devices.
In order to speed up the flashing operation and avoiding doing wasteful
write operations on the RRAM, default to ERASE_NONE for ICs in these
series.
A new ``--erase-pages`` command-line switch has been added to allow
users to keep erasing the pages that will be written to the firmware.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Commit fixes bug when corresponding group ID was never
incremented for independent corresponding relationships.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Updated the bsim-tests workflow to exclude all .rst files.
As per GitHub docs:
The order that you define paths patterns matters:
A matching negative pattern (prefixed with !) after a positive match
will exclude the path.
A matching positive pattern after a negative match will include the path
again.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
No functional change. This is only so as to adopt a versioning scheme
where the Zephyr version of the action is considered more recent than
the upstream version (here, v1.1.1) by means of using dots instead of
dashes.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add checks that we will be able to catch invalid compression bit in
response CNAME handling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow only 0xc (0b11) as two highest bit to mark the compression
when parsing the CNAME response. See RFC 9267 ch. 2 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add checks that we will be able to catch recursive name pointers and
abandon the response for CNAME handling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure that the CNAME handling checks recursive name pointers
and fails the response if recursion is detected.
See RFC 9267 ch. 2 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Boards that have sysbuild enabled in Twister will have the build folder
for the hello_world sample in a subfolder, so update the code
accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Added support for wpa-wpa2 mixed mode in ap enable
- Added support for WPA3 Transition mode in STA connect
Signed-off-by: Nitin Pandey <nitin.pandey@silabs.com>
The closing comment for CONFIG_SDMMC_STACK #ifdef directive was
incorrectly labeled as CONFIG_SDIO_STACK. This commit corrects the
comment to reflect the correct configuration macro and improve code
clarity.
Signed-off-by: Mirai SHINJO <oss@mshinjo.com>
The power supply configuration is already set during
the early H7 soc init.
Let the clock initialization handle the voltage scaling.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This show a nice widget to switch between the various board targets and
see their respective list of supported features.
The original HTML content of the page is preserved and JavaScript code
"patches" the page on-the-fly. This is so that the actual HTML content
(that e.g. search engines see) is complete and indexable (as well as to
provide useful information for folks who might have JavaScript disabled
altogether).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Revision might be `0` so update the condition to not inadvertently
exclude boards with such revision number.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The board revision should appear right after board name, not after the
qualifiers as was previously done.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This probably got lost in previous refactoring but this variable is
used in a few CSS rules so it better point to an actual font stack
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
clang recently began providing predefined __INTN_C/__UINTN_C macros
resulting in macro redefinition warnings in toolchain/llvm.h. This
change was landed in clang in late Jan. 2025 and clang/LLVM 20 is the
first official release that has this support (see the PR linked below).
Prefer the definitions provided by clang and avoid redefining these macros
for clang versions 20 and later to avoid said warnings.
Link: https://github.com/llvm/llvm-project/pull/123514
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
When deriving the new LK, remove the old LK if it exists.
Store the derived LK if the flag `SMP_FLAG_BOND` of LE SMP is set.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The flag `BT_LINK_KEY_SC` of LK will also be set when derive LK from
LTK.
It is a incorrect behavior.
The flag `BT_LINK_KEY_SC` should only be set if the flag `BT_KEYS_SC`
of LTK has been set.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The chip requires a successful sleep entry to change the PLL sequence.
By default, the IT8XXX2 chip enables the I2C0 alternate function, which
can cause the clock/data lines to meet the start condition, preventing
EC from entering sleep mode.
This commit disables the I2C0 alternate function before executing the
PLL sequence change to ensure that the EC can enter sleep mode
successfully.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This commit adds the possibility to add additional custom
context for flash operations for usage by non-standard
flash drivers.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
The check for index out of bound is missing, It turns into a crash
for input channel more than WIFI_MGMT_SCAN_CHAN_MAX_MANUAL.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
UDC API passes struct udc_ep_config to all functions. Some UDC functions
were using endpoint config structure while some were using device and
endpoint number. This API inconsistency led to completely unnecessary
endpoint structure lookups. Remove unnecessary lookups by using endpoint
config structure pointer where it makes sense.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Clarify that the file system needs to be re-mounted after clearing.
It was not clear that zms_clear both cleared and unmounted the fs.
Signed-off-by: Emil Hammarström <emil.hammarstrom1@assaabloy.com>
Converting absolute system ticks to GRTC ticks is simple and algorithm
can be simplified. Legacy algorithm was copied from nrf_rtc_timer which
back then was working on 32 bits only.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Test was occasionally failing when two types of current time
reading occurred at different system tick. In that case they
were of by one system tick and test was failing.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
ROM_ADDR and RAM_ADDR is same when CONFIG_XIP is not defined.
If we reset the location for RAMABLE region to RAM_ADDR text region,
which is part of rom, overlaps with initial ram region.
This commit tries to avoid this incorrect behaviour for cortex_a
and cortex_m
Signed-off-by: Simon Maurer <mail@maurer.systems>
Some target may need to pass in the application argument. In such case
do not override it.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
What is the change?
- Non secure build variants can now be used with ARMFVPs.
Why is this change needed?
- Running non secure variant of a build doesn't work with FVPs
previous to version 11.27. The newer version of FVP added the
support to run the tfm_merged.hex files.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add a memory barrier to make sure write to NVIC is completed
before continuing with the test fails in scenarios where
CONFIG_ROMSTART_RELOCATION_ROM is enabled for boards like MPS3
Corstone310 and k_sem_take is called before the isr's are called.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Enable tests by default for CS300 and CS310 since they support
simulation and FVP's are available in upstream docker.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
What is the change?
- MPS3 Corstone310 can now be used with userspace application.
This is done by dividing flash into ITCM+ISRAM and using a
bigger SRAM.
Why do we need this change?
- ITCM and DTCM for MPS3 Corstone310 are small (32KB) to build
with userspace. So we need bigger flash and sram.
We can use the bigger ISRAM as flash but, Cortex-M expects
vector table to be in 1st few bytes of ITCM.
So to build for userspace we distribute FLASH between ITCM and
ISRAM while using SRAM as sram.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Adds enum names to `bluetooth.h` and `gatt.h` to make them easier to
reference. Adds Doxygen references where relevant.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
There are cases where reset_rx() is called when rx.buf is set (e.g. when
the buffer was too small to receive the incoming packet). Be sure to free
the buffer, so that it wont get reused for the next packet (which might
require a buffer from a different pool).
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The flag `SMP_FLAG_BR_CONNECTED` is cleared by the function
`smp_br_reset()` and `smp_br_init`. But the flag
`SMP_FLAG_BR_CONNECTED` should not be cleared at this time.
Recovery the flag `SMP_FLAG_BR_CONNECTED` after the all flags of SMP
cleared.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
If the encrypt value of classic connection is
`BT_HCI_ENCRYPTION_ON_BR_AES_CCM`, set the flag `BT_KEYS_SC` for
the derived LTK.
Or, clear the flag `BT_KEYS_SC` for the derived LTK.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
