The settings shell returned an unhelpful message when provided
the incorrect arguments. This changes the returned message to
provide the correct usage message.
Signed-off-by: Tim Gibson <timmaxgibson@gmail.com>
dt_chosen_enabled argument was incorrect and it was always returning
n so option could not be used.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This test is being skipped for the last 3 years, had lots of issues when
it was introduced. No need to keep it in the tree.
If fixed and made to work again, we can always add it back.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Few tests are being skipped for no goot reason (anymore). Add some
coverage using few platforms that work with intention to expand if all
works well and if needed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some platforms were excluded due to issues that were fixed or resolved
themselves. Enable those platforms again and remove the comments related
to the issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a hack that is used until we have proper IP routing
in place. The code has now special check that makes sure that
we only route IP packets to VPN interface when the packet is
destined to that subnet. So if destination IP address does
not belong to VPN interface subnet, it is not routed there.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of calling various network interface API functions to get
the network interface and related source IP address, have a single
function that can return both data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for setting up VPN enablers in the network stack.
These are to be used by the VPN implementation like Wireguard.
Signed-off-by: Jukka Rissanen <jukka.rissanen@gmail.com>
If CONFIG_NET_DHCPV4_OPTION_PRINT_IGNORED is set, then adjust the
tests as we no longer get so many events.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently we ignore the received domain name but make sure we
print it in order to avoid unknown option prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently we ignore the received host name but make sure we
print it in order to avoid unknown option prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently we ignore the broadcast address but make sure we
print it in order to avoid unknown option prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add board support for the Arduino Giga display shield.
Signed-off-by: Ibrahim Abdalkader <i.abdalkader@gmail.com>
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The passive level of the clock does not change instanteneously when
it's set using function XMC_SPI_CH_ConfigureShiftClockOutput().
This means that the passive level of the clock can be in the wrong
state when the chip select goes low.
Fix this by adding a small delay when the polarity changes to allow
the clock to return to the proper level.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
As part of relocation, this script matches each source file to its
corresponding object file. This matching is done inside of get_obj_filename
which is called once per source file.
get_obj_filename traverses the entire build directory on every invocation.
This is unnecessary since built object files don't change. On a
sufficiently large project (like mine), this script takes over a minute and
the majority of that time is spent needlessly traversing the build
directory again and again.
Caching the list of object files enables this script to run in less than a
second.
I tested by building my project (which enables the relocation script) and
comparing memory breakdown before / after.
Signed-off-by: Galen Krulce <gkrulce@meta.com>
Commit removes device key candidate if provisionee failed
during device key refresh procedure or mesh reset has been
called in between. Otherwise, device key candidate gets
stuck in the internal trusted storage of crypto library.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Avoid compiler warnings for zero-length-arrays in the http-server. By using
memcpy instead of strcpy.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Besides E51 and U54 SMP variants, one can target
a single core of U54 for testing purposes.
There is already CONFIG_RV_BOOT_HART=1 that specifies
the starting HART ID for the SMP core.
Set CONFIG_MP_MAX_NUM_CPUS=1 as well to limit
the number of physical CPUs visible at build time
so that Zephyr code tries running only on the selected one.
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Now that nRF70 by default uses zero-copy fine-tune the configuration to
get optimal memory while getting peak throughputs.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This uses the network packet as is without the need for a copy all the
way till the packet is handed over to RPU.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Test was assuming that CONFIG_SYS_CLOCK_TICKS_PER_SEC=100 but such
frequency is not well supported on SoC which are based on 32768 Hz RTC
clock. Align test to be able to work with different sys_clock
frequency by converting previously 20 ticks to milliseconds.
Set CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768 when system clock is using
Nordic RTC timer driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
It is already ensured in the fpga logic, that there is only one
interrupt per liteeth dev at a time. So we can remove the irq_lock on rx.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This patch adds a mutex for the eth_tx() function to prevent multiple
threads from calling the function at the same time.
Also remove the unneded irq_lock in that function.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
According to AVCTP v1.4: On the controller and the target side,
handling of transaction labels is dependent on the application.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Remove the transaction label mechanism because:
1. Not necessary at stack, typically an application can handle the
timeout mechanism if required (very rarely).
2. It is a burden on memory size to record all pending commands.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch allows the upper layer to acquire the remote AVRCP
capabilities. These capabilities can be further used in register
notifications.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Since this SoC is equivalent to the STM32F429 SoC, simply include its
device tree and add the 'cryp' node for the hardware cryptographic
accelerator.
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
STM32F439 SoC is an STM32F429 with an integrated crypto/hash processor
providing hardware acceleration for encryption (AES and TDES) and hash
(MD5, SHA-1 and SHA-2).
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Remove the redundant keys method when using the
in statement on a dict to fix the Ruff SIM118
warning.
Signed-off-by: James Roy <rruuaanng@outlook.com>
