I won't be able to actively maintain this subsystem, but maybe help
reviewing on my spare time. The API has not changed from its
introduction, it's been mostly new drivers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
I won't be available to collaborate in MFD, Input or GD32 areas, so
let's drop my collaborator entries.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
@kartben has been doing a great job maintaining docs, so we're good in
this area. I'll stay as collaborator so I can still follow what's going
on.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If the RX FIFO buffer is full and there's nothing being transmitted
no LPUART interrupt will fire anymore. Thus the application will not
receive any bytes anymore. By enabling kLPUART_RxOverrunInterruptEnable
we will receive interrupts even though RX FIFO is full so we can recover
from this.
Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
Update exit-latency-us with newly measured values. Measurement is
taking into account additional timing compared to wakeup from
WFI.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add nrf_cache_power_up and nrf_cache_power_down functions. In case of
s2ram power up cache as early as possible, before restoring ARM core
registers. It improves restore time from 180 us to 33 us.
As a minor optimization nrf_memconf_ramblock_control_mask_enable_set is
used which allows to control ram blocks for icache and dcache in a
single register write.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Allow relocate_vector_table() to be overwritten. This is necessary if
the IRQ vector table is handled proprietary, e.g. before the zephyr
kernel is initialized. In this case we want this function to be empty to
avoid overriding the previous configuration.
Co-authored-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
Arm OUT endpoints only when enqueueing first buffer. Disarm IN and OUT
endpoints on endpoint disable. Prevent ISO endpoints from being armed
twice before SOF.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Use USB stack state instead of former HAL state to determine what to do
with control transfer buffers.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
There is finite number of distinct events that are handled in thread
context and the order of handling is flexible. Therefore use events
instead of message queue because it is guaranteed to never get full.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
There is no need in notifying the driver that OUT data has been
received. This was only used for control transfers with OUT data stage
because dma waiting bit was not set when enqueueing buffer to receive
data stage.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Endpoint abort is guarded with DMA semaphore. The buffers can be freed
by the caller immediately after endpoint is aborted because the driver
won't access them anymore.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Use UDC endpoint state instead of the legacy hal state. Only functional
change relates to overload condition (buffer is too small to hold data
received on OUT endpoint). Previously the data would be completely
discarded and udc driver error would occur (overload event was
unhandled). Now buffer too small error is logged and as much data as
possible is copied to buffer.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This is preparatory commit for former nrfx USBD refactor. The refactor
towards native driver will only be performed on the udc driver (old USB
stack driver will continue to use nrf usbd common until it is removed).
Code is copied from nrf_usbd_common.c with minimal changes:
* nrf_usbd_common_irq_handler renamed to nrf_usbd_irq_handler
* usbd_enable renamed to nrf_usbd_peripheral_enable
* all non-static nrf_usbd_common functions have prefix changed to
nrf_usbd_legacy and are changed to static
* functions not used by udc nrf driver are removed
* braces are moved inside #if to pass compliance checks
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The transfer is queued when buffer is available. There is no point in
delaying the wait until SOF. The check is completely unnecessary.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add bt_ccp_client_get_bearers that will return the bearers of
a client so that the application can always retrieve them if they
do not store them from the discovery callback.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This renames the STM32_PWR_WKUP_PIN_SRC_x symbols to better match
their meaning. It also adds a new symbol (STM32_PWR_WKUP_PIN_NOT_MUXED)
for SoCs without wake-up mux support.
Signed-off-by: Tomáš Juřena <jurenatomas@gmail.com>
Catch up on some of the boards recently added as well as some that were
missed in the previous batch update.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When only changes are in the "hostap" module the wifi build tests should
be run. Add the module tag to fix that.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes twister failure in AP mode (it was enabled by default causing all
wifi build tests to fail).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fix the kconfig check for enterprise crypto support in AP mode.
Also, remove the unnecessary Hostapd enterprise crypto check in
credentials code.
Signed-off-by: Triveni Danda <triveni.danda@nordicsemi.no>
Add migration guide entry about dropped IPPROTO_RAW support from
AF_PACKET sockets, with possible alternatives.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPPROTO_RAW is not a valid protocol type for AF_PACKET sockets, which
should only use IEEE 802.3 protocol numbers. Therefore remove support
for this type of sockets.
As an alternative, users can use AF_PACKET/SOCK_DGRAM or
AF_INET(6)/SOCK_RAW, depending on the actual use case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce changes in the networking stack which allow to create raw IP
sockets, so that applications can send and receive raw IP datagrams.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Register connection type along with family and protocol, so that it's
possible to differentiate between connection listening for raw IP
datagrams and TCP/UDP/other packets.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is no need to wait on xfer_new and xfer_finished and therefore
atomic services can be used instead of events.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add minimal support for board Renesas RZ/G2L-SMARC
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Created new files and relocate hostapd support code in glue layer to new
files. The new files will be compiled only if hostapd support is enabled.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
When endpoint is disabled while hibernated, the UDC endpoint state has
to be reset. Set the busy to false to keep UDC endpoint state in sync
with peripheral register state.
Fixes: 2be960ad2b ("drivers: udc_dwc2: Disable endpoint while
hibernated")
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
