Windows powershell can by default not autocomplete known boards when
tapping which can cause frustration when you can't quite remember the
exact name or you don't want to type it out.
west build .\path\to\application\ -p -b stm<tab> will search for
available board including 'stm' in their name.
Signed-off-by: Tais Hjortshøj <tbh@mjolner.dk>
The name of the sensor in the title had one S too many, it should
be LPS22HH instead of LPSS22HH.
Same for the I3C version of the sample.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
warning: format '%d' expects argument of type 'int', but argument 3 has
type 'size_t' {aka 'long unsigned int'} [-Wformat=]
Change the printf modifier to %zd for size_t variable will resolve the
warning.
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Add driver capability to properly set high performance mode
while setting data rate (thru lis2duxxx_mode_set() API)
based on how power-mode is set into DTS: if it is set to
LIS2DUX12_OPER_MODE_HIGH_PERFORMANCE then configure HP mode,
LP/ULP mode otherwise.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use `defaut y if` instead of `depends on` as the related Kconfig
should be user configurable even when standby mode is not used.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Character glitches are observed when entering suspend and standby low
power modes.
To fix it, we make sure the `poll_out` API waits for the character
transfer to complete. This is aligned with the uart driver API
description.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
There was some confusion about why this function doesn't work with
nordic devices. The explanation is that the controller is required
to return an error code if the remote device doesn't need an FAE table.
Signed-off-by: Olivier Lesage <olivier.lesage@nordicsemi.no>
Changes on NXP Robotics Products area:
- add myself as collaborator
- move ucans32k1sic board from S32 area
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
With a missing RAM value in the ARC QEMU board YAML,
Twister assigns it 128. The min_ram filter for the
testcase is higher. The RAM in the ARC QEMU board DTS
is 4 MB. Update ARC QEMU board YAML to include 4 MB
of RAM so tests run on ARC QEMU.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Make it so LLEXT allocates a memory region equal or greater
to the minimum size supported by the MPU, to ensure no region
overlap.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Since Zephyr SDK 0.16.9, it has support for building the board
qemu_xtensa/sample_controller32/mpu. Addd the corresponding
toolchain entry in the YAML file so it can built with twister
without forcing toolchain.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of using individual SoC kconfigs to determine whether
to enable the Xtensa simulator logging backend, simply use
CONFIG_SIMULATOR_XTENSA.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The bt_csip_set_member_get_sirk function is superseded by
bt_csip_set_member_get_info and uses of it has been replaced.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Calling sensor API functions on devices not in `PM_DEVICE_STATE_ACTIVE`
is a violation of the PM API. Adding manual checks inside of drivers
complicates the drivers and increases ROM footprint for no additional
benefit.
Signed-off-by: Jordan Yates <jordan@embeint.com>
By moving data section between rodata and bss, and disabling
Kconfig LINKER_LAST_SECTION_ID by default if non-XIP (it is
seems only needed for XIP), the size of zephyr.bin can be
reduced significantly on non-XIP system.
As a result, moving __kernel_ram_start to another place
to ensure it still include bss + data as before.
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
The new name is slightly clearer, since strictly speaking any value not
part of the enum is invalid.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Allow passing structs with sys_dlist_t members as const without
discarding qualifiers if the API is used without modifying it.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Allow passing structs with sys_slist_t/sys_sflist_t members as const
without discarding qualifiers if the API is used without modifying it.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This patch unifies the board target identifier output to match that in
the `hello_world/src/main.c` file.
Signed-off-by: Patryk Koscik <pkoscik@antmicro.com>
Updates the includes in a a few files to
avoid including unused header files and include the
ones that are used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updates the includes in a a few files to
avoid including unused header files and include the
ones that are used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updates the includes in a a few files to
avoid including unused header files and include the
ones that are used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updates the includes in a a few files to
avoid including unused header files and include the
ones that are used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updates the includes in a few header files to
avoid including unused header files and include the
ones that are used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There was a semaphore in hci_core which was given to early when
receiving the BT_HCI_EVT_NUM_COMPLETED_PACKETS message from the
controller. This would sometimes cause an assert to happen in
function hci_num_completed_packets, where there would arise a
mismatch in the bookkept count, and actually stored nodes. More
concretely, due to premature semaphore giveing, the tx_pending node
would be have been removed in another context before it could be
fetched and moved to complete list in this function.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
The current frequency of 16 MHz has been observed to result in
communications errors on a nRF5340DK. Since the LoRa PHY bitrate is
measured in kbps, there is no throughput implications from this change.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Currently, GPIO16/17 are supported for Ethernet phy
clock out, but some boards are also using GPIO0.
This change allows GPIO0 to be configured.
Signed-off-by: Cliff Brake <cbrake@bec-systems.com>
