Introduces one of the official flash tools for bouffalolab platforms.
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
Signed-off-by: Camille BAUD <mail@massdriver.space>
The original filtering condition was only whether ambient-temp0
device existed or not. However, registering ambient temp0 does
not mean that NET-related devices have been enabled.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Add support for p3t1755 temperature sensor on RT700 cm33_cpu1 core
Add net driver condition to exclude rt700 platform
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Added IAR support to the macros ARCH_ISR_DIAG_OFF and
ARCH_ISR_DIAG_ON and updated the IAR warning macros.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
The IAR C/C++ compiler can't resolve a cast on a pointer
to a constant expression. This is used in the
_ARCH_MEM_PARTITION_ALIGN_CHECK macro.
This fix checks if an IAR compiler is used and disables the
start-alignment check if it is.
This was already fixed for v7 in rev d34d554d.
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
Update hal_wch.
As the hal upstream changed name, there is now a name conflict.
Rename ch32fun.h to hal_ch32fun.h to fix this conflict.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Add Variscite DART-MX93 board support. This SoM is based on NXP's
i.MX93 SoC. It includes Cortex-A55 and Cortex-M33 support.
Signed-off-by: Andre Morishita <andre.m@variscite.com>
The PR for this shield was in-flight while shield.yml was being introduced.
Add the missing file so that this shield is properly listed in the
board catalog.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added custom mcuboot cmake for sign/encrypt by using cysecuretools
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Enable support of SECURE LCS stage. In this stage, the protection
state is set to “secure”. A secured device will boot only when the
authentication of its flash boot and application code succeeds
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Instead of using app_header.c generate the app header using python
script and merge with final binary post build
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Add custom flashloader (for openocd) with 64k of erase block size.
Default one has 512, which cause MCUbootloader overwrite during flash
primary application.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Initializing the C++ stack unwinding data structures takes quite a bit
of stack space. Increase the TEST_EXTRA_STACK_SIZE when using these.
Signed-off-by: Keith Packard <keithp@keithp.com>
These two tests are validating that deprecated APIs still work
correctly. Which means they will definitely generate compile warnings.
To disable -Werror while letting it be enabled for other tests, create a
new Kconfig variable, DEPRECATION_TEST and make
COMPILER_WARNINGS_AS_ERRORS depend on that option being unselected. Add
this option to the two tests so that the resulting configuration
disables -Werror.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This file is explicitly included by the espressif hal module. It's an
internal file provided by picolibc and newlib. Provide a stub to let
code designed for those to work with the minimal C library.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test only works for 64-bit values. On targets which use 32 bits for
double, skip this version. The float test will check the 32-bit math for
that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr switched to using CMSIS_6 module in f726cb51
which breaks certain boards like `nucleo_h745zi_q/stm32h745xx/m7` when
CONFIG_CORTEX_M_DWT, CONFIG_TIMING_FUNCTIONS are enabled and cmsis from
`module/hal/cmsis` is not available (deleted explicitly after west
update).
This commit adds a provision to be able to use CMSIS_6 macros when the
module cmsis is not available.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
As noted in PR #89370, the content of these files falls below the
trivial threshold. Therefore, it is not necessary to retain the original
copyright, which was carried over when the files were copied from the
`cmsis` module.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
This commit brings a convenient way to run clang static analyzer on a
project with 'analyze-build' llvm utility.
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
Test case `test_set_bulk` and `test_get_set` test the LwM2m getter and
setter function by
- init a buffer with some value
- calling lwm2m_set_... with buffer as parameter
- calling lwm2_get_... by letting `get` write-back into the same
buffer(!)
- compare the buffer with the init value
That implementation can't recognize a no-operation getter function.
This change adds some C macro magic for both test cases where
an `out` buffer for setter and an `in` buffer for getter functions
exists. The buffers are checked before use for inequality to avoid
any unexpected pass.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
Add support for 16-channel ADC to cc23x0 SoC. The driver supports the
following conversion modes:
- Single channel | Single conversion,
- Sequence of channels (up to 4) | Single conversion.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Some RTC clock code introduced is specific to SOC_SERIES_MCXN, and
causes build failures on other SOCs.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Siwx91x support a specific mode slightly better than the old legacy PS
mode.
This mode has to be set on the NWP boot, so it is not easy to configure
it during the runtime. Hence, this patch only provide a compile time
option to enable it.
Co-authored-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
We can now implement the get_power_save_config() callback.
Co-authored-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Added power-save mode support to optimize station wake-up timing
and reduce power consumption. The device currently supports
only legacy power-save mode.
This feature can be tested using the Wifi shell:
- ps: Enable the PS. By default, the device operates in fast
PSP mode.
- ps_exit_strategy: Updates mode if enabled; otherwise, follows
the configured exit strategy when power-save is enabled.
- ps_wakeup_mode: Configures the wake-up behavior.
- ps_timeout: Defines the timeout duration for power-save mode.
Co-authored-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Update the response callback function signature to allow the callback to
return an error code, which in turn will cause the HTTP client to abort
the download.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The return value can only be -1, errno value should be verified instead
for the actual error code.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
