A -1 was missing from the timer value calculation. In addition,
DIV_ROUND_CLOSEST was replaced with a custom macro fixing #84782.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
Based on a dicussion on the Bluetooth SIG GAWG reflector, it is
not allowed for a broadcast assistant to request specific BIS
indexes as well as BT_BAP_BIS_SYNC_NO_PREF in the same
request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Based on a dicussion on the Bluetooth SIG GAWG reflector, it is
not allowed for a broadcast assistant to request specific BIS
indexes as well as BT_BAP_BIS_SYNC_NO_PREF in the same
request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit splits the CAP and GMAP audio configuration (AC)
tests into separate scripts. The purpose of this is to reduce
the runtime of the individual scripts (some, like the cap_ac_11,
tests takes a long time to run all combinations).
This split also improves support for running them in parallel.
An additional, positive, side effect of this is that the logs will
also be smaller per run.
The new scripts can be run directly, or via the e.g. _cap_ac_X.sh
scripts that run entire audio configuration for all presets.
The design of how the parameters are passed around, are based
on variable instead of function arguments. Effectively they can
be used for the same thing, but variables have the advantage
that it is easier to deal with longer names,
and that any of the test scripts can be called with additional
arguments that can, when using variables, easily be forwarded
to the call to Execute for the PHY in the
_ac_common.sh.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix issue where STM32 I2C LL driver could block forever when SDA and SCL
are shorted and interrupts are disabled (CONFIG_I2C_STM32_INTERRUPT=n).
Added timeouts to all blocking wait loops in the STM32 LL I2C driver to
avoid indefinite blocking.
Fixes#88506
Signed-off-by: Jean Nanchen <jean.nanchen@hevs.ch>
Added network type check to fix the system crash caused by non-wifi
network card calling wifi api interface
Company:BSH Crop
Signed-off-by: Chen Tao <ct05342@163.com>
"udp bind" and "udp send" commands use the same net context
variable and they fail early if the context is already used.
This prevents from using "udp send" after "udp bind", which
makes the commands hard to use for testing bidirectional
communication. Make "udp send" reuse the already bound
context if possible, and resort to allocating temporary one
otherwise.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
When execute `bt connections`, only the peer device address of selected
LE connection is flagged with `*`.
Improve the command `bt connections` to support BR connections.
Regardless of the connection type, `*` will be shown to indicate the
peer address of the current connection if the peer device address is
the peer address of selected connection.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
This commit removes the requirement for DNS_RESOLVER. If DNS_RESOLVER is
enabled, hawkbit uses `CONFIG_DNS_RESOLVER_MAX_QUERY_LEN` for the
server_addr buffer, if disabled it uses `CONFIG_INET6_ADDRSTRLEN`.
This adheres to #89533 which removes the requirement for DNS_RESOLVER.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
This commit adds a `strnlen` length check for `server_addr` to ensure that
it will not be truncated and result in a silent failure. Instead, the
call to `hawkbit_set_config` will return -EINVAL if the supplied
`server_addr` is too long for the internal buffer.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
The hawkbit subsystem was erroneously using DNS_MAX_NAME_SIZE as the
maximum query length. This limited query strings to only 20 bytes,
truncating many domain names.
Signed-off-by: Neal Jackson <neal@blueirislabs.com>
Because this is a common testing scenario, almost any counter instance
should be able to run. Some counter instances cannot run this sample
should be filtered by platform_exclude or filter keywords.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Migrate renesas,ra-agt-counter implementation to use hal_renesas.
Add additional AGT_CLOCK_SUBCLOCK count source.
Add constraint for counter resolution to 32 or 16 bit variant.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Updated set_drp_toggle to handle differences in TCPCI revisions.
Added a macro for TCPCI revision and read it from the chip register
during initialization.
Signed-off-by: Jianxiong Gu <jianxiong.gu@outlook.com>
When TF-M is enabled, Mbed TLS's MD module (which is used to generate
v5 UUIDs) will dispacth hash operations to TF-M. Unfortunately TF-M
does not support SHA-1 (because it's a weak algorithm) so the
computation will fail.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- "bt_le_adv_update_data()" func calls just after bt_enable() call
without completion of bt_ready() which is called as part of worker
thread within init_work() causes issue where bluetooth controller
has not been initialized and provides cb to app before app requests
advertise_update to the stack.
- remove bt_ready() func and place content within main() post
bt_enable() fixes this issue.
Signed-off-by: Nirav Agrawal <nirav.agrawal@nxp.com>
Some IPM devices return an error if we request to transfer data.
Use IPM_MAX_DATA_SIZE to determine if the virtio ID can be transferred
through the IPM device.
Send data to IPM only if CONFIG_IPM_MAX_DATA_SIZE is not zero.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The ipm_send() allows transferring data through the IPM device.
However, depending on the platform, the mailbox peripheral may either
transmit a limited amount of data or not transfer data at all.
Introducing this configuration allows exposing the IPM capability to the
application.
This commit defines a default value of 1024 bytes to avoid impacting
existing IPM drivers and sets the value to 0 for the STM32 IPCC and
STM32 HSEM devices.
This allows, in a next step, other devices to use this configuration to
expose their capabilities instead of using proprietary configuration or
a static definition.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
The name of the boards was incorrect in the documentation,
Fix the name of the board according to the official name.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
In almost all WCH boards doc, the name of the processor had a typo:
QingKe 32-bit RISC-V4F instead of QingKe V4F 32-bit RISC-V
Fix the doc for all relevant boards.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Fix issues reported by string validation which was added to strings
used in zassert macros.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In enum tcp_state {}, the CLOSED state was put at the last one.
When we do Sequence & Ack validation, we will need to skip the
CLOSED, LISTEN, SYNSENT states. It is easier for coding if we
put the CLOSED to the front, e.g. if state > SYNSENT. And, in
other OSes, the state sequence is normally defined like this.
Signed-off-by: Shrek Wang <inet_eman@outlook.com>
Update to a revision of the manifest action that includes:
https://github.com/zephyrproject-rtos/action-manifest/pull/21
Also add the corresponding binary blobs labels parameters to the
workflow.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This test only works for 64-bit values. On targets which use 32 bits for
double, skip this version. The float test will check the 32-bit math for
that.
This is the 'nicer' version of this fix which uses sizeof rather than
relying on __SIZEOF_DOUBLE__.
Signed-off-by: Keith Packard <keithp@keithp.com>
When both CONFIG_NET_IPV6_DAD and CONFIG_NET_IPV4_ACD are disabled, the
anonymous union in struct net_if_addr ends up with no members, which
results in a different struct layout between C and C++.
In C, an empty union has size 0, while in C++ it has size >=1, which
shifts the offsets of the following fields.
Add a 1-byte dummy member to the union to ensure consistent layout
across both compilers.
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
The spi_loopback_transceive() helper currently only prints a
message if a configuration is invalid, continuing the test
case as if it succeeded. This results in the test case using the
helper trying to validate the result from a spi transaction that
was skipped.
Fix this by explicitly skipping the test using the ztest
framework's ztest_test_skip() function, which skips the entire
test case.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
- Add devicetree for AM6232, the dual core AM62 processor without GPU
- Used in revision A0 of PocketBeagle 2
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- AM6232 is a dual core variant of AM6234 with everything being same.
- Used in the first batch of PocketBeagle 2
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
