moves adafruit_feather_esp32s3_tft_reverse_procpu.conf file
to the correct folder after PR was merged.
Signed-off-by: Philipp Steiner <philipp.steiner1987@gmail.com>
Correct PLL input frequency calculation to consider
HSI clock divider in clock_stm32_ll_h7.c file.
For sake of simplicity, use PLLSRC_FREQmacro that
already considers the HSI clock divider when applicable.
Signed-off-by: Khaoula Bidani <khaoula.bidani-ext@st.com>
When built with the minimal libc while using POSIX clocks, Zephyr
compilation breaks with "error: unknown type name 'clockid_t'." Use
int instead of clockid_t to eliminate the dependency.
Suggested-by: Chris Friedt <cfriedt@tenstorrent.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Remove the unused variable 'lock_id' from main.c in the arc_vpx_lock test.
No functional change intended.
Signed-off-by: Gaetan Perrot <gaetan.perrot@spacecubics.com>
When received the valid S frame, the retransmission timer should not
be restarted if unacknowledged I-frames have been sent but the
retransmission timer has not elapsed.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Fix Tx Ack FIFO's first index being advanced beyond a
recorded ack_last value in a node_rx when under race
between ll_rx_get() being pre-empted while executing the
`tx_cmplt_get()` and a call to `ll_rx_put()` in an
interrupt service routine.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
During #89407 a driver-specific header stm32_dcmipp.h got introduced to
support new functionnalities not yet covered by video APIs.
Move this header into a new <include/zephyr/drivers/video/> include
direcctory like what other driver classes do.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Bump the argc check from 3 to 4 as the shell scan command has 3 required
parameters, the last being the scan duration:
- argv[0]
- passive|active
- channels
- per-channel duration in ms
Signed-off-by: Simon Piriou <spiriou31@gmail.com>
Fix an issue where the BME280 sometimes returns an incorrect chip ID
immediately after a power cycle. This causes sensor initialization to fail.
According to the datasheet, the sensor requires a 2 ms start-up delay after
power is applied. This patch introduces a sleep delay to ensure the
required start-up time is respected before reading the chip ID.
Signed-off-by: Filip Stojanovic <filipembedded@gmail.com>
If the disconnect event is raised before the network has been connected,
report the connection result as `WIFI_STATUS_CONN_FAIL`, instead of as
`WIFI_REASON_DISCONN_SUCCESS`, which is interpretted as
`WIFI_STATUS_CONN_SUCCESS`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Setting the DOZEN bit in the flexio so the soc
does not force the peripheral to go into
low power mode when the soc is in idle.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Based on a discussion around P4WQ limitations for our application, it
was determined that the RTIO workqueue required the ability to use
additional threads from the pool in spite of work items blocked.
Since this is not covered, nor desired for the P4WQ, then remove this
dependency and re-implement it in a way that covers also this use-case.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Processed on separate worker threads. This test is expected to fail
as the P4WQ limits the number of active items assigned to worker
threads to the number of CPU cores the system has.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
There is no need to call stm32_pwr_wkup_pin_cfg_pupd() because
the SoC does not have a pull-up/pull-down on the WKUP pin.
Call LL_PWR_ClearFlag_SB() before entering StandBy power mode.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
If z_get_next_switch_handle determines no reschdule is needed, do not
mark thread as switched_out in set_curent() where new and old thread are
the same.
See zephyrproject-rtos/zephyr#88596 for more details.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add missing call to thread_switched_in for the purpose of tracing.
Fixeszephyrproject-rtos/zephyr#76057
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previously we always had driver to support 2M PHY regardless of
configuration. As this was fixed the missing support statemenent
caused 2M support to miss regardless of configuration.
Signed-off-by: Petri Pitkanen <petri.pitkanen@silabs.com>
Avoids shadowing the outer 'err' variable by reusing it instead of
redeclaring it inside a conditional block.
This improves code readability.
Signed-off-by: Gaetan Perrot <gaetan.perrot@spacecubics.com>
When the returned buffer is a `NULL` of the pull function, it means
there is not any data needs to be sent. However maybe there is any
frame pending on other L2CAP channel needs to be sent over the same
ACL connection.
Re-trigger the TX processor. It will call the pull function again
and the pending buffer will be pulled from following L2CAP.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Separate entry (see `Drivers: Wi-Fi as nRF Wi-Fi`) handles
Wi-Fi related reviews. Add files-exclude to decrease noise.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Doxygen 1.14 comes with really useful UX improvements which we want to
benefit from in our API documentation so update the CI job accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Move `@cond INTERNAL_HIDDEN` comment where it belongs (fixing what was
probably a copy-paste/refactoring error).
This also makes the previously `bap_iso`, `group`, `_prev_seq_num`
visible again.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The clock tree of the STM32H7RS series uses the ppre1
and ppre2 naming convention instead of apb1_prescaler
and apb2_prescaler for bus prescaler.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add APP_DIR as a kconfig environment variable.
This is useful in cases where you want to set a config path relative to
the directory of the application.
An example of this is how many sysbuild.cmake files sets the source
directory like this:
ExternalZephyrProject_Add(
APPLICATION remote
SOURCE_DIR ${APP_DIR}/remote
BOARD ${SB_CONFIG_REMOTE_BOARD}
)
The same however cannot be done in Kconfig.sysbuild:
config NETCORE_IMAGE_PATH
default "${APP_DIR}/<image_path>" if NETCORE_ABC
Instead they must use ZEPHYR_MY_MODULE_MODULE_DIR, however not all
applications are part of a zephyr module.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Current Implementation to write to MAC_MDIO_ADDRESS causes CR to be
set to 0. This leads to the divide always being 42 (on FRDM_MCXN947)
so, by default the clock is running at ~3.6MHz which is out of spec
range (1.0-2.5MHz)
This stops the do_transaction function from overwriting CR.
It also saves off the CR register before DMA reset
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
The `die_temp` variable declared under `CONFIG_ISM330DHCX_ENABLE_TEMP` was
never used.
Instead `die_temp2` was used without using
`CONFIG_ISM330DHCX_ENABLE_TEMP`.
Removing it to avoid confusion.
The variable `die_temp2` holds temperature data from IIS2MDC.
Since there is no other variable with this purpose anymore, rename it to
die_temp for clarity.
Signed-off-by: Gaetan Perrot <gaetan.perrot@spacecubics.com>
add doxygen groups to include/zephyr/math header files and fold them
under Utilities top-level group.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
moved docs to Utilities group (vs. top-level)
cleaned several incorrect Doxygen group definitions
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Some of ESP32 Radio calls present in blobs needs to be
executed from IRAM or RAM instead of flash to avoid
cache disabled issues.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
z_sched_lock() has exactly one user in tree which is
k_sched_lock(). So combine them to make it easier to
follow (or not, since there is no jumping to another
file anymore).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When IMU is set to stream with High-res mode, the FSR settings are
fixed for ICM42688 at 16g and 2000dps.
Unless this is enforced, the driver will provide incorrect scaling for
readings coming through streaming when the current FS setting is any
different than these.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Clean up unused variable 'ret' and 'link_state' in eth_xilinx_axienet.c to
improve code clarity.
Signed-off-by: Gaetan Perrot <gaetan.perrot@spacecubics.com>
