Added a flag parameter so that it is possible
to use the bt_cap_initiator_unicast_audio_stop to perform
disable+stop without releasing the streams by setting the
RELEASE flag.
This allows us to use the bt_cap_initiator_unicast_audio_stop
function to just disable streams without releasing them,
as that is requested by some PTS tests such as
CAP/INI/UST/BV-40-C.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Zephyr SDK 0.17.0 adds the toolchain for the Intel Audio DSP
ACE 3.0 platforms. We can now add the bits to enable building
the boards with SDK 0.17.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Amend the filtering so that the normal mem_map (with exec) test
is not going to run on Intel Audio DSP SoCs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With the rename of intel_adsp/ace30_ptl to intel_adsp/ace30/ptl,
the "sim" variant no longer inherit the base configuration. So
make a copy of the .conf file to explicitly target the sim
variant.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
some flashes support special opcodes
for 4-byte addressing, that can be used
without switching to 4-byte mode.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Increase the conn interval from 30 to 60 for more stability
in test with multiple lower testers (up to 3).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ARGB8888 values all had alpha '0x00' (=transparent).
Changed them to '0xFF' and added a transparency test patch in the middle
of the screen.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Non-alpha colors were converted to colors with `0x00` alpha, which makes
them fully transparent.
The correct way would be to add a `0xff` alpha, which this change does.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
While the driver was already capable of processing `ARGB8888` data,
it did not actually show the alpha value in any way.
This change adds a checkerboard background that shows transparent
regions.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
`lv_task_handler()` returns a `uint32_t`, but `k_msleep` takes a
`int32_t`.
If no timer exists, `lv_task_handler()` returns `UINT32_MAX` to indicate
that we should wait forever. However, this gets auto-cast to `-1`,
indicating to `k_msleep` to not wait at all, creating a busy loop.
Hence, a clamping to `[0, INT32_MAX]` is required.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Adds a sample that renders the simple `hello world` LVGL demo
with a transparent background, to demonstrate ARGB8888 framebuffer
capabilities.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
Any request 5 did set the address even if it's a non standard
request like vendor specific requests.
Signed-off-by: David Schneider <schneidav81@gmail.com>
Netcat (nc) does not handle SIGINT. It silently ignores it.
We cannot use run_client(), given that the pydoc for
run_client() specifically contains "Run a client that
handles SIGINT".
Instead, use check_call(), which correctly handles Ctrl+C.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
This adds a new kconfig for eviction algorithm which needs page
tracking. When enabled, k_mem_paging_eviction_add()/_remove()
and k_mem_paging_eviction_accessed() must be implemented.
If an algorithm does not do page tracking, there is no need to
implement these functions, and no need for the kernel MMU code
to call into empty functions. This should save a few function
calls and some CPU cycles.
Note that arm64 unconditionally calls those functions so
forces CONFIG_EVICTION_TRACKING to be enabled there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Alder Lake have at least 2 cores. Both boards using this SoC
(up_squared_pro_7000 and adl) are configured with
MP_MAX_NUM_CPUS=2, so dts should contain at least one more core.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
This fixes#78721 which was introduced in PR #44686, which changed (and
renamed) `adv_new_legacy`/`adv_get_legacy` to return an existing
`bt_dev.adv` if it existed. This caused a problem, where the existing
adv then would be used to start advertising, and if this fails (because
the adv is already advertising, for instance), `bt_le_adv_start` would
erroneously delete the adv, making the host lose the context for the adv
which still is advertising.
Before PR #44686, this would not happen, because `bt_le_adv_start` would
return early when `adv_new_legacy` returned `NULL` and never reach the
delete call.
I have refactored this to make responsibilities a bit more clear:
`adv_create_legacy` now does 1 thing: create an ext adv and assign as
the legacy advertiser. This mirrors `bt_le_adv_delete_legacy` which does
the opposite. I have implemented error codes to match the behavior that
PR #44686 was made to implement.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
The patch modifies the "Programming and Debugging" and "Flashing" sections
to make the documentation clearer and consistent with what is reported for
other ST boards.
Suggested-by: Abderrahmane Jarmouni <git@jarmouni.me>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
The building and flashing of the drivers/display and subsys/display/lvgl
examples confirmed that the LTDC peripheral is supported.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
The commit e17e54c48f ("boards: stm32: add flashing with stm32cubeprog
for all") did not update the documentation regarding the flashing
section, which no longer uses the OpenOCD runner by default.
Fixes: e17e54c48f
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
After we take the true MTU into account, we need to send proper
number of bytes (multiple of 8) in one IPv6 fragment.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Shorten the timeouts so that the tests are run in 6 second instead
of 15 seconds.
Use only native_sim for the tests so that the tests are run without
any extra delays.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If PMTU is enabled, then use the MTU value from it instead of always
using network interface MTU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IPV6_MTU IPv6 socket option and implement getsockopt() and
setsockopt() calls for the option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_MTU IPv4 socket option and implement getsockopt()
call for the option. The IP_MTU option does not support
setsockopt() call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Send a network management event for a changed path MTU value.
Both IPv4 and IPv6 have their own events as we cannot mix these
because how the network event numbering space is implemented.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Catch "Destination Unreachable" ICMPv4 messages and update PMTU for
a given destination IPv4 address.
Use that PMTU when sending data to the destination.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Show information whether PMTU is enabled or not.
Show pmtu destination cache content with "net pmtu"
command. The "net pmtu flush" can be used to clear the
cache.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Catch "Packet Too Big" ICMPv6 messages and update PMTU for
a given destination IPv6 address.
Use that PMTU when sending data to the destination.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print more cases when the packet is dropped, and also print
the upper layer verdict for the packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds generic code that can be used by both IPv4 and IPv6
Path MTU Discovery mechanism. The actual PMTU support for each
protocol family is in subsequent commits.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The `arch_proc_id()` returns the hartid of a CPU, which may not start
from zero. The way that it's used as an index to access `save_irq[]`
array is wrong, use `arch_curr_cpu()->id` instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Previously, twister would fail due to a warning being escalated to
an error because CONFIG_NET_TEST was set.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
