Moves several node-specific operations inside the Node class to improve
its encapsulation, remove a monkey patch and access to internal methods
and fields.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
CONFIG_TEST_USERSPACE should select CONFIG_USERSPACE as they
should be enabled together. It is no use to enable userspace
tests without enabling userspace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both `include/zephyr/dt-bindings/pinctrl/gecko-pinctrl.h` and
`include/zephyr/dt-bindings/pinctrl/gecko-pinctrl-s1.h` define
`ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_GECKO_PINCTRL_H_`
to prevent duplicate inclusion.
Changed it to `ZEPHYR_INCLUDE_DT_BINDINGS_PINCTRL_GECKO_PINCTRL_S1_H_`
in `include/zephyr/dt-bindings/pinctrl/gecko-pinctrl-s1.h` side.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Both `include/zephyr/drivers/interrupt_controller/intc_esp32.h` and
`include/zephyr/drivers/interrupt_controller/intc_esp32c3.h`
define `ZEPHYR_INCLUDE_DRIVERS_ESP_INTR_ALLOC_H__` to prevent
duplicate inclusion, so it cannot be properly prevented.
Change to a file path name-based definition.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Both `include/zephyr/drivers/dma/dma_smartbond.h` and
`include/zephyr/dt-bindings/dma/dma_smartbond.h` define `DMA_SMARTBOND_H_`
to prevent duplicate inclusion, so it cannot be properly prevented.
Change to a file path name-based definition.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Passing data by value is more efficient in this context. As such,
revise `poll_out_fn` and `uart_stm32_poll_out_visitor` to accept
the `out` argument by value instead of by address.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Make sure that we cannot connect to IPv4 multicast or broadcast
destination address for a TCP socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is helper is only needed in socket multicast interface selection
where we need to get one address from the interface so that it will
tell (when getsockopt() is used), the interface IPv4 address where
multicast packets will be sent. This is private function which is not
needed in public headers so place the prototype to net_private.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Do the selection same way as in IPv6 so that if user supplies
unspecified destination address, the default interface is selected
the same way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Some of the network tests require that source and destination
addresses are not swapped so allow test to control the address
swapping from the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_I2C_STATS is enabled, the device state for all I2C controller
drivers must contain the I2C stats. This space is allocated by calling
Z_I2C_INIT_FN as part of the device definition; this is done automatically
when using I2C_DEVICE_DT_DEFINE instead of DEVICE_DT_DEFINE. If space
for statistics is not properly allocated but CONFIG_I2C_STATS is enabled,
an unexpected write to memory outside of the stats region may occur on
an I2C transfer. This commit uses I2C_DEVICE_DT_DEFINE or
I2C_DEVICE_DT_INST_DEFINE for all in-tree SPI controller drivers that do
not already.
Signed-off-by: Dane Wagner <dane.wagner@gmail.com>
Remove unnecessary include in header and source file.
gmtime_r() is an extension to the C library, and therefore one
needs to explicitly ask for its prototype to have it exposed.
This is done by defining _POSIX_C_SOURCE so let's do so.
These two changes fix build errors with some libCs.
Tested with pico, newlib, minimal and the host glibc.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The channel filter and release functions can be used by some
DMA drivers to perform blocking operations (i.e: allocating,
de-allocating channel resources). In such scenarios, the
channel request and release functions become unsuitable for usage
inside ISRs. Drop the `isr-ok` tag and add comments regarding this
behavior being driver-dependent.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This is useful for releasing channel resources "allocated" during
channel request. These resources can refer to enabled IRQs, PDs,
etc...
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This patch defines the message format for AVCTP unit message.
This is the first out of the four types of commands and can be
used by the CT to obtain the unit info from the TG device.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Only the basic functions for establishing an AVCTP connection
are provided at this stage.
An BR/EDR ACL connection is necessary before AVRCP function.
Register callbacks before utilizing AVRCP.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch add SDP records for both CT and TG role.
The SDP attribute would be registered according to the configuration.
OBEX and Browsing commands are optional and yet not supported.
SDP registration is implemented at AVRCP level to simplify the
workload of the upper layer. We assume the App can have limited
knowledge on SDP structures.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch implementing avrcp.c
New Kconfig BT_AVRCP is provided to enable this layer.
BT_AVRCP_TARGET and BT_AVRCP_CONTROLLER are then
provided to enable one of the two roles independently.
avrcp.h shows the APIs for the upper layer.
Only connection and disconnection interfaces are provided in this patch.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch implementing avctp.c
New Kconfig BT_AVCTP is provided to enable this layer.
avctp_internal.h shows the APIs for the upper layer, i.e., AVRCP.
Only connection and disconnection interfaces are provided in this patch.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Disable every PLL before configuration. That allows
an application to reconfigure PLLs after a bootloader
configuration.
Don't disable the PLL clock if it is used by (Q|O)SPI
when executing from external memory. That will lead
to a stall.
Note: when (Q|O)SPI runs from PLL, the bootloader
dictates the clock configuration. There is no clock
reconfiguration support for memory map mode in
(Q|O)SPI drivers.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This commit changes the way some x86 devicetree set the unit-address values
of memory nodes. Before the change, they were always set to `0`. After the
change, they are derived from the `DT_DRAM_BASE` macro to match the first
address specified by the reg property.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
