When sleep modes are used, sockets are restored from NV after boot.
If the network changes IP addresses, restore sockets maintain old network
info in the HL7800 firmware.
On boot, restored sockets should be closed to ensure new sockets
are created with updated network info.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Update AT command API to return a response.
Add param to set the timeout when waiting for a response.
If the user does not desire a response, the response buffer can
be NULL.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
All other APIs that need to reset the modem do so in an async way.
Make the rest API async as well.
This fixes issues where modem events related to the reset
were not generated properly.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Add an overlay for hl7800 modem configuration.
Adjust the client to wait until the network is ready before
trying to connect to the lwm2m server.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Ensure the proper byte order is used for the network socket in the stack.
When sending the AT commands, the port needs to be converted to
host endianess.
TLS handshakes check that the remote address and port match
what is expected.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Added a support for new mps2 board an386 to enable testing with ARM FVP.
Qualifier to build/run application with board is mps2/an386.
Signed-off-by: Samuel Chee <samche01@arm.com>
In case connection fails, the driver should raise a connect result event
to notify the user.
Signed-off-by: Toon Stegen <toon@toostsolutions.be>
Signed-off-by: Bart De Vos <bart.devos@verhaert.com>
Allow user to specify protocol extensions when receiving data
from Ethernet network. This means that user can register L3
protocol handler using NET_L3_REGISTER() with the desired
protocol type. Ethernet code will then call the handler if
such a protocol type packet is received. This is currently
only implemented for Ethernet. The original IPv4 and IPv6
handling is left intact even if they can be considered to
be L3 layer protocol. This could be changed in the future
if needed so that IPv4 and IPv6 handling could be made
pluggable protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Makes 802.15.4 use the API under CONFIG_CLOCK_CONTROL_NRF2
in nrf_clock_control.h to request/release HFCLK.
Previous HFCLK requesting/releasing on nRF54H20 was more
of a workaround and could produce issues when
comes to sharing the resources.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
Add support to wake up from sleep mode by START condition when i2c
is configured to target mode.
Signed-off-by: Alvis Sun <yfsun@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add `smb-wui` property to support wake-up from sleep mode by START
condition when i2c is configured to target mode.
Signed-off-by: Alvis Sun <yfsun@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
SBUS parser discards portion of the received data, this is a result
of SBUS parser intermediate variable overflow. Fix by changing said
variable type to uint32_t.
Signed-off-by: Nikola Petrovic <nikolaptr6@gmail.com>
Using NET_TCP_MAX_SEND_WINDOW_SIZE and NET_TCP_MAX_RECV_WINDOW_SIZE
for TCP case.
Reduce net_buf count to save memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The elfconvert_flag_lma_adjust property is required when using
CONFIG_BUILD_OUTPUT_ADJUST_LMA, but was missing for LLVM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The motivation for this patch was to improve the script's performance,
but some stylistic changes and cleanups are included as well.
The main optimization concerns the use of PyYAML, as it offers multiple
functions for interpreting YAML. The commonly used `load`/`safe_load`
converts a YAML stream to a dictionary. There are also `scan`, `parse`,
and `compose`, which return intermediate representations, the last one
being a graph. [1]
Since `gen_driver_kconfig_dts` scans DT bindings for compatible strings,
it only needs to look through top level keys in YAML. The intermediate
PyYAML graph is sufficient for this, and using it reduces the script's
execution time by about 30%, without making the code too complicated.
[1] - https://pyyaml.org/wiki/PyYAMLDocumentation
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
With assert condition set to true, assertion never happens.
Change __ASSERT(true) to __ASSERT(false).
Signed-off-by: Dmitry Lukyantsev <dmitrylu@meta.com>
Workaround by using `-start_offset` to ensure that the ACL
established does not overlap the sink being established.
The behavior between nrf52_bsim and nrf54l15bsim is
different where in the two device are starting to
advertising at the same time in nrf54l15bsim where as
there is an offset already in nrf52_bsim test.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Align DDPI usage with nRF54L series power domains and
available DDPI configurations.
Use indices below 4 when needing to bridge with GPIO,
use indices below 8 when needing to bridge with MCU domain
like CCM and AAR; and use indices above 7 to bridge with
Peripheral domain.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace use of HAL_RADIO_RECV_TIMEOUT_CANCEL_PPI with
HAL_TRIGGER_CRYPT_PPI; they have same value but use the
correctly named HAL_TRIGGER_CRYPT_PPI define now.
Fix conditional compile to correctly exclude reference of
NRF_CCM when CONFIG_BT_CTLR_PRIVACY=n.
Fix missing reference to CCM_TASKS_CRYPT_DELAY_BITS when
CONFIG_BT_CTLR_SW_SWITCH_SINGLE_TIMER=y.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
