Fix the ns16550 uart driver and relevant SoCs accordingly.
All generic settings are now DTS based.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix the qmsi uart driver and relevant SoCs accordingly.
Also: using config for irq everwhere relevantly and not an hardcoded
value in the driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Get the name generated through dts as well.
Fix the rtc driver and relevant SoCs accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Get the name and irq flags generated through dts as well.
Fix Kconfig for the gpio driver accordingly.
Irq priority is not set by dts for D2000 as it's irq controller does
not support it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Zephyr exposes the ability to set IRQ priority on IOAPIC.
To keep compatibility with Linux, let's add the priority at the end
after sense. So imported dtsi with interrupt-cells set to 2 will work as
usual.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
.config files can now be loaded from within the menuconfig interface.
Show-all mode is turned on if the selected menu entry becomes invisible.
Unrelated fix: The menu path at the top of the display no longer
includes implicit (indentation-based) submenus, which makes it a bit
less spammy and confusing.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Rescheduling was called unconditionally at the end of k_mem_slab_free
call. It is necessary only when thread is pending in the wait queue.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Current implementation hardcoded channel in received frame structure.
With this change channel can be retrieved from a OpenThread platform,
and put in the frame. In result procedures like Discovery can be
executed correctly. Change was tested with OpenThread Border Router.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit contains bugfix for Joiner eui-64 handling and setting radio
in correct mode after calling thread stop.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to check whether an interrupt is pending for the driver user,
the driver itself needs to verify what interrupt paths are enabled (RX
and or TX) so that as not to return true misleadingly.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Skip writing index and symbol RST files whose content hasn't changed, to
avoid updating their timestamps. This makes documentation rebuilds much
faster, as Sphinx looks at the timestamp to determine if an RST file has
been updated.
Rebuilding docs with symbol reference up-to-date, before:
$ time make html
real 4m52.838s
user 4m46.242s
sys 0m4.249s
After:
$ time make html
real 0m48.731s
user 0m47.571s
sys 0m0.908s
Testing was done with 'make VERBOSE=1 SPHINXOPTS= html', suggested by
Marti Bolivar.
Piggyback a small cleanup to the code generating the select/imply
information.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add IEEE 1003.1 Posix Style file system API support.
These API's will internally use corresponding Zephyr
File System API's.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Enable CONFIG_NET_DHCPV4, while keeping static IP configuration,
which allows the app to work both with static IP (e.g. when
connected to a workstation without DHCP server) and with DHCP (e.g.
when connected to a router). When using DHCP, getting an address
may take some time, during which getaddrinfo() may fail due to a
timeout. So, add retries for this call.
Tested with qemu_x86 (non-DHCP) and frdm_k64f (both DHCP and
non-DHCP).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The Bluetooth core specification splits the valid LE L2CAP PSM range
into two subranges:
- Standard, SIG-assigned fixed PSM values in the range 0x0001-0x007f
- Dynamic, allocated at runtime in the range 0x0080-0x00ff
Previously the bt_l2cap_server_register() API was assuming that the
app would always decide the PSM, which effectively made it impossible
to have collision-free dynamic PSMs. This patch extends the
implementation so that if server->psm is 0, then the stack will look
for a free PSM from the dynamic range and take it into use.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of having an ivu_unknown variable to track when we can ignore
the 96-hour minimum duration requirement, simply set the duration to
the minimum (96 hours) in the places where ivu_unknown would have been
1.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If a packet with source IP address and port same as the address of echo
server is received, it causes echo server to recursively send the packet
to itself, resulting in a crash and memory depletion. This commit fixes
the crash by dropping the packet.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
When designing the registration client for LwM2M, I understood
that the LwM2M Technical Specification allows for a multi-server
connection setup where the client makes several connections
to various LwM2M servers and allows each of them to manage
various aspects of the LwM2M client based on Access Controls.
However, the way I implemented it was not well thought out and
as we look forward to adding Bootstrap support, it needs a
do over.
Let's remove all of the code dedicated to handling multiple LwM2M
client connections. This will simplify and reduce the code size
of the registration client considerably.
Later, once Bootstrap support has been added, we can implement
multi-server connections in a cleaner manner.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This allows a user to customize the port used for downloading
firmware via the pull method of the LwM2M client. It's default
value of 0 will select a random port during initialization.
NOTE: If set, this value should not be the same port as the
LWM2M_LOCAL_PORT setting.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Due to a bug where LWM2M_LOCAL_PORT was not being honored, all
outgoing traffic from the LwM2M client was coming from a random
port determined during initialization.
Now that this bug bas been fixed, let's default the client to the
behavior that most users are expecting, and let new users customize
the outgoing port if needed (which should be rarely).
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, CONFIG_LWM2M_LOCAL_PORT is never used when setting up
the LwM2M client. Let's set the port of the local address using
CONFIG_LWM2M_LOCAL_PORT, so that the client can bind to it.
NOTE: A setting of 0 will use a random port.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Currently, the client_addr parameter is only used to check the
sa_family at various points during the init process. Both the
IP address and the port are ignored. Let's set the local client's
port based on the port value of the passed in client_addr if one
is supplied.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The port parameter passed to _net_app_set_local_addr() is converted
from host byte-order to network byte-order. Here we are passing
a port value which has already been translated to network byte-order.
Let's translate the local port to host byte-order when passing it
to _net_app_set_local_addr() to fix this issue.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
There were multiple spots where code was using the _wait_q_t
abstraction as a synonym for a dlist and doing direct list management
on them with the dlist APIs. Refactor _wait_q_t into a proper opaque
struct (not a typedef for sys_dlist_t) and write a simple wrapper API
for the existing usages. Now replacement of wait_q with a different
data structure is much cleaner.
Note that there were some SYS_DLIST_FOR_EACH_SAFE loops in mailbox.c
that got replaced by the normal/non-safe macro. While these loops do
mutate the list in the code body, they always do an early return in
those circumstances instead of returning into the macro'd for() loop,
so the _SAFE usage was needless.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Refactoring. Mempool wants to unpend all threads at once. It's
cleaner to do this in the scheduler instead of the IPC code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove unstructured and unused doxygen groups for tests. We will now add
doxygen comments per test function and follow a more structured
grouping.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The toplevel adc_seq_table is now copied onto the stack and
the stack copy used.
The contained entries array is now copied onto an allocation
drawn from the caller's resource pool, to prevent modification
of the buffer pointers.
The return value policy here is to oops the caller if bad memory
or objects are passed in, but return an error otherwise.
Based on an original patch by Leandro Pereira, rebased and the
copy of the entries array added.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit mirrors 0f1229bd68866 ("doc: genrest: Show properties on the
correct symbol definition"), for the menuconfig symbol information
display.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previously, symbols defined in multiple locations (e.g.,
Kconfig.defconfig symbols) would incorrectly get all their defaults,
selects, implies, and ranges displayed on the first definition.
This commit uses the Kconfiglib functionality added in 53af8db920066
("kconfiglib: Record which MenuNode has each property") to show such
symbols with all properties in the right location.
The definitions are now listed one-by-one, with the filename/linenr
displayed before each definition. The menu path (e.g.,
'(top menu) -> Device Drivers') is now listed for each definition as
well.
Fixes: #6879
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit does some major surgery to Kconfiglib so that properties
(defaults, selects, etc.) can be shown on the menu node that actually
has the propetrty for symbols and choices defined in multiple locations.
This will be used to improve the output of genrest.py and the symbol
information display in the menuconfig.
The parsing code is a bit simpler now too as a side effect.
Commit message from Kconfiglib (63a44186137e2)
==============================================
This allows accurate documentation to be generated for symbols and
choices defined in multiple locations. There are now MenuNode.defaults,
MenuNode.selects, etc., lists that mirror the corresponding
Symbol/Choice lists.
Symbol/Choice.__str__() now correctly show property locations as well,
by simply concatenating the strings returned by MenuNode.__str__() for
each node.
_parse_properties() was modified to add all properties directly to the
menu node instead of adding them to the contained symbol or choice. The
properties are then copied up to symbols and choices in
_finalize_tree(). Dependency propagation is handled at the same time.
As a side effect, this cleans up the code a bit and de-bloats
_parse_properties().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
