Call updatehub_report_error() when detecting an unconfirmed image in
autohandler to ensure the server is notified of the failure before
triggering a rollback.
Signed-off-by: Adrien Maillard <adrien.maillard@edu.hefr.ch>
Report the error state to the UpdateHub server before triggering a rollback
in autohandler mode. This prevents the server from redeploying the same
(failed) update after rollback, avoiding update loops. Also exposes a new
public syscall: updatehub_report_error(), allowing manual mode users to
report an error explicitly.
Signed-off-by: Adrien Maillard <adrien.maillard@edu.hefr.ch>
When external station connects to soft ap,
fill ap_sta_info.twt_capable with external
station HE capability.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
1. When external station connects to soft ap, zephyr
hostap will fill sta_info before sending mgmt event
to l2 wifi layer.
sta_info.twt_capable should be filled with external
station capability rather than soft ap self.
2. Rename hapd_is_twt_capable to
hapd_get_sta_he_twt_capable.
Try to get twt_capa form capability of external station
rather than soft ap.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
1. When external stations connect to soft ap,
Wi-Fi driver will send UAP_CLIENT_ASSOC event with data.
nxp_wifi_wlan_event_callback will be called to process this event.
2. The data should include some basic station information
but not only mac address of station.
3. Fill ap_sta_info with information of
connected station but not soft ap self.
4. Fix: Wi-Fi driver send UAP_CLIENT_ASSOC event
with basic station information.
5. Fix: ap_sta_info with information of connected station.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
Different LPSPI IPs are used for RT11xx and MCXN. On a older version of
LPSPI, a transmit command or a TX data need to be issued to end a frame.
On a new version, no such requirement.
Based on above information, we have to make DMA transfers "cascade" in
the DMA ISR to keep CS asserted during the whole SPI transfer.
PCS_HOLD_ON is a feature to keep CS asserted during multi SPI transfers.
It is implemented and supported on new LPSPI IP but it is impossible to
be supported on an older version like RT11xx.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
There is an issue that the SCO connect cannot be un-referenced by HFP
AG when the SCO connection is broken if the SCO connect is not created
by HFP AG.
Register SCO connect change callback. And un-reference the SCO connect
in SCO disconnected callback.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
There are two issues found,
Issue 1, if the SCO connection has been established, the SCO connected
event will not be notified. Then the call that waiting for the SCO
connected event will not be updated. And the call will be rejected due
to the timeout.
Issue 2, the SCO con object will be cleared when SLC is disconnecting
and the SCO connection has been established. It causes the SCO connect
object will be `NULL` in the SCO disconnected callback.
Add a new field `sco_conn` to keep the SCO connect object. Manage the
SCO connection via the field `ag->sco_conn`.
When creating the SCO connection, keep the created SCO connect object
to `ag->sco_conn`. And if the `ag->sco_chan.sco` is `NULL`, it means
the SCO connection has been established. Just update the call that
waiting for the SCO connected event directly.
Increase the `ref` of SCO connect object and pass to the field
`ag->sco_conn` if the `ag->sco_conn` is `NULL`.
Decrease the `ref` of SCO connect object if the `ag->sco_conn` is not
`NULL` when disconnect the SCO connection or process SCO disconnected
event.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Add an overlay to the spi_controller_peripheral test for the
frdm_mcxa156. Since this IP has multiple CS, need to introduce a way to
configure the correct CS to the test; just going to use zephyr,user for
now instead of refactoring to be less nordic-specific, keeping the usage
optional.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Increase the number of HCI command transmit buffers on ESP32 to prevent
sporadic command timeouts. This is a temporary workaround.
Upcoming changes to the BLE proprietary blobs will address the root cause.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
List NEORV32 v1.11.6 as the currently supported version. No changes to the
in-tree drivers needed for the changes between v1.11.3 and v1.11.6.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Coverity regularly raised a CID with every release that it found
`sizeof(char **)` confusing and somehow nonportable.
With every release, it needed to be marked as a false positive.
Change `sizeof(char **)` to `sizeof(void *)` to silence the
CID warnings.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The Adafruit Feather ESP32S3 TFT Reverse is a development board in the
Feather standard layout, sharing peripheral placement with other devices
labeled as Feathers or FeatherWings. The board is equipped with an
ESP32-S3 mini module, a fuel gauge, a USB-C and Qwiic/STEMMA-QT connector.
This variant additionally comes with a 240x135 pixel IPS TFT color display
on the backside of the boards and with 3 buttons.
Signed-off-by: Philipp Steiner <philipp.steiner1987@gmail.com>
The basic characteristics of "atmel,sam-rtc" is the same as the ones
of sama7g5.
Differences between the RTCs listed bellow:
| atmel,sam-rtc | rtc in sama7g5
--------------------|---------------|----------------------
Persian calendar | Y | N
UTC Mode support | N | Y
Tamper Timestamping | N | Y
Signed-off-by: Tony Han <tony.han@microchip.com>
This test case is not supported on the S32Z platform,
as it requires execution across two CPU cores
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Strictly speaking not a problem for in-tree tooling, but better to
have all binding files follow the same naming convention.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The preferred way to reference the size of the MAC address is
WIFI_MAC_ADDR_LEN.
For consistency, replace ARRAY_SIZE(mac.octet) with WIFI_MAC_ADDR_LEN.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
We avoid to assign unused values during declaration. Hence, the reader
knows that every value assigned are meaningful. It also allow compile to
raise true warning if a value is used uninitialized.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Usually, the exception are treated in a condition before the nominal
case:
ret = f();
if (ret) {
return -EXXX;
}
... nominal case ...
siwx91x_on_join_ipv4() and siwx91x_on_join_ipv6() didn't follow this
pattern.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
sl_wifi_interface_t interface is always initialized with
sl_wifi_get_default_interface().
Let's assign the value during the declaration everywhere.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Unify the way the error code are tested:
- sl_status_t is an alias to an int. The compiler won't complain if an
int is assigned or compared to a sl_status_t. In the other hand,
"int" is well known to manage error code. So, just use "int"
everywhere.
- Always name the return code "ret"
- Unless it is meaningful, test the value of ret against 0
(SL_STATUS_OK is just a convoluted way to say 0).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
siwx91x_wifi.c starts to contains to much code. Let' simplify it by
grouping all the station related functions in a separated file.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
siwx91x_wifi.c starts to contains to much code. Let's simplify it by
grouping all the power-save related functions in a separated file.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
siwx91x_wifi.c starts to contains to much code. Let' simplify it by
grouping all the Access Point related functions in a separated file.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
siwx91x_wifi.c starts to contains to much code. Let's simplify it by
grouping all the scan related functions in a separated file.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Functions in siwx91x_wifi_socket.h are not declared static. So it create
duplicated symbols if the file is included twice.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Previously the clock was not attached to all Flexcomm ports. Some ports
were configured with FRO_12M, others with FRO_HF, some not at all.
Now every Flexcomm port in I2C, SPI or USART mode uses the FRO_HF clock,
if it is enabled in the device tree, to cover all use cases.
Signed-off-by: Fabian Otto <fabian.otto@rohde-schwarz.com>
cbprintf_package_convert may invoke z_cbprintf_cpy with a null pointer
to buf and zero length to indicate a flush operation. This triggers
an error from the undefined behavior sanitizer due to memcpy being called
with a null src, which is undefined behavior according to the C standard.
This is avoided by exiting early in z_cbprintf_cpy when length is zero.
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
