Add support for running LwM2M client on nRF52840 chip
using nRF9160 as a modem through serial port.
nRF9160 should run Serial LTE Modem application build
from nRF Connect SDK.
nRF9160DK board has two MCU, nRF9160 and nRF52840.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Make Xtensa simulator logging backend depend on more generic
SIMULATOR_XTENSA setting instead of individual SoCs.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
The LoRaWAN SMP transport uses MCUMGR_TRANSPORT_LORAWAN_REASSEMBLY to
enable reassembly. It selects MCUMGR_TRANSPORT_REASSEMBLY, which causes
smp_transport_init to call smp_reassembly_init on the passed transport.
This makes the subsequent call to smp_reassembly_init in the LoRaWAN
transport initialization redundant.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Before the fix for #77150 was merged, with LOG_BACKEND_SHOW_COLOR=n and
CONFIG_SHELL_VT100_COLORS=y the shell would still display colors by
enabling the flag in the shell_log_backend.c.
Now, LOG_BACKEND_SHOW_COLOR has to be enabled to allow shell logging
color, but that writes ANSI escape sequences to the log files.
Explicitly disable ANSI color output for the filesystem logging backend.
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
Add an empty codeowner file redirecting to MAINTAINERSS.yml file for
clarity and to make some tooling happy.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allow enabling MBEDTLS_RSA_C without key exchange enabled.
This allows to use RSA without enabling x509 support too.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
remove the FATAL_ERROR message, and leave it just as a message.
also enhance filter for this case with "1pc0" anmd "1pc1"
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
need add protection when check with sysbuild filter out
application, the domains is NULL
fixes: #87163
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The commit adds Kconfig options that allows users to select
- MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
- MBEDTLS_PLATFORM_SNPRINTF_ALT
allowing Mbed TLS to use alternative definitions of STD functions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The MAX22199 is an IEC 61131-2 compliant industrial digital input device.
The MAX22199 translates eight 24V current-sinking industrial inputs to a
serialized SPI-compatible output that interfaces with 3V to 5.5V logic. It
can operate as eight Type 1/Type 3 digital inputs or four Type 2 digital
inputs. The device provides diagnostic functions, including thermal
shutdown, 24V under voltage alarm, 24V missing voltage alarm, and SPI and
CRC communication error detection.
Signed-off-by: Robert Budai <robert.budai@analog.com>
If socket call fails when mdns_responder creates listeners, then
print the return value to make it easier to figure out what is
wrong. Typically one needs to increase the size of
CONFIG_ZVFS_OPEN_MAX if errno is ENFILE.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Building with clang, it warns:
tests/net/lib/http_server/core/src/main.c:1400:19: error: variable
'http1_header_capture_common_response' is not needed and will not be
emitted [-Werror,-Wunneeded-internal-declaration]
static const char http1_header_capture_common_response[]
^ = "HTTP/1.1 200\r\n"
Add a check to make sure the response actually matches the expected
response.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
- Add new device tree source include file for DA14697 SoC
- Update Kconfig and soc.yml to support the new device
Signed-off-by: Muhammad Waleed Badar <walid.badar@gmail.com>
ESP32xx appcpu board should only be built with procpu.
Stand alone AMP support makes no sense.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
If CONFIG_TFM_BL1 config has been enabled
bl2_signed.bin/hex image will be be generated during build tf-m
these binaries shall be used while generating tfm_merged.hex
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Define BL1 and sign key for BL2 configs and pass them to the TF-M
This will allow to trigger BL1 over zephyr and specify BL2 sign key
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Remove the support of the Nucleo WBA52CG board since it is NRND
(Not Recommended for New Design) and it is not supported anymore
in the STM32CubeWBA from version 1.1.0 (July 2023).
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
In this commit we updated the document page for the sensry
ganymed_bob_sy120 boards.
Signed-off-by: Sven Ginka <s.ginka@sensry.de>
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
Extend `zephyr_library_amend()` to support an optional directory
argument.
The current `zephyr_library_amend()` works well when used inside a
Zephyr module with same structure, but fails when the macro is called
from Zephyr module integration code is located in a Zephyr
`MODULE_EXT_ROOT` because in this case the CMake code being executed
is not present in the Zephyr module itself, in which case the dir name
creation based on relative to module dir give wrong result.
For this use-case then support a base directory.
This also allows for use-cases in Zephyr modules where the directory
structure matching Zephyr's own structure is placed in a sub-folder.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The simple backend returns the size of the credential,
even if it is too big.
The secure backend should do the same,
our libraries depend on this behaviour.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
The help text for connect says
[-b, --band] 0: any band (2:2.4GHz, 5:5GHz, 6:6GHz]
but it disallows setting band to 0. Change this and allow
band 0 option when doing normal connect. Disallow setting
the band 0 when enabling AP mode.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The negative status code is actually the errno which we might
get returned from lower levels. For example if user sets -t
(timeout) option, the -ETIMEDOUT might be returned. In this case
map the errno value to connection timeout status value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If "wifi connect" fails, tell user why in textual format.
This helps debugging connectivity issues.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update the HW models module to:
fe4ff0e191a52de4f85ecc3475f0253eca6fc5bf
Including the following:
fe4ff0e CLOCK: Support having or not LFCLK
22f1642 54L CLOCK: Add option to control instantiation of POWER
registers
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fixes wait for completion problems where the ISR was not sending
out TX NOP's when needed causing the transfer to timeout
Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
OVERLAY_CONFIG has been deprecated and replaced by
EXTRA_CONF_FILE. Update samples to reflect that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
OVERLAY_CONFIG has been deprecated and replaced by
EXTRA_CONF_FILE. Update samples to reflect that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In case a confirmed image gets generated, it should be used during
flash process.
If there is a valid application in second image slot, flashing
*.signed.hex will result in a unconfirmed image in first slot.
After reboot MCUboot will replace the unconfirmed image by swaping
the confirmed application from the second into the first slot.
Signed-off-by: David Schneider <schneidav81@gmail.com>
The LSM6DSV32X part is nearly identical to the LSM6DSV16X but has different
sensitivity scales for the accelerometer (4-32G versus 2-16G). This commit
adds support for this part via the "st,lsm6dsv32x" compatible string.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Update migration guide for 4.2 release with an entry about the API
change related to MQTT 5.0 support.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure conditionally compiled parts of the public header related to
MQTT 5.0 support are rendered by doxygen.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As MQTT 5.0 allows to specify the disconnect reason in the Disconnect
packet, use this new feature to improve error notification to the
broker, according to the error guidelines in the MQTT 5.0 spec.
For most cases, a generic arbitrary mapping between errno values and
reason codes is used, however the parser can specify the disconnect
reason code manually to better handle certain corner cases (like invalid
topic alias used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for handling topic aliases received from the broker.
The MQTT client implementation will store received topic for further use
in case consecutive PUBLISH received from the broker contains no topic
but alias only.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for a new AUTH message introduced in MQTT 5.0.
This is a new mechanism specified by MQTT 5.0, which allows clients and
brokers for enhanced authentication in between CONNECT and CONNACK
exchange. An additional MQTT event (MQTT_EVT_AUTH) was specified which
is triggered when the AUTH packet arrives from the broker.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for DICONNECT message specified in MQTT 5.0.
As with MQTT 5.0, the disconnect can now also be initiated by the
broker, it was needed to add decoder support for the message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
