It is already ensured in the fpga logic, that there is only one
interrupt per liteeth dev at a time. So we can remove the irq_lock on rx.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This patch adds a mutex for the eth_tx() function to prevent multiple
threads from calling the function at the same time.
Also remove the unneded irq_lock in that function.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
According to AVCTP v1.4: On the controller and the target side,
handling of transaction labels is dependent on the application.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Remove the transaction label mechanism because:
1. Not necessary at stack, typically an application can handle the
timeout mechanism if required (very rarely).
2. It is a burden on memory size to record all pending commands.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
This patch allows the upper layer to acquire the remote AVRCP
capabilities. These capabilities can be further used in register
notifications.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Since this SoC is equivalent to the STM32F429 SoC, simply include its
device tree and add the 'cryp' node for the hardware cryptographic
accelerator.
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
STM32F439 SoC is an STM32F429 with an integrated crypto/hash processor
providing hardware acceleration for encryption (AES and TDES) and hash
(MD5, SHA-1 and SHA-2).
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Remove the redundant keys method when using the
in statement on a dict to fix the Ruff SIM118
warning.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Enhance SPI API documentation.
The improvements include:
- Reorganize the doxygen into logical sections
- Add clear explanations of the CS behavior
- Improved descriptions of buffers and transfers
- Better descriptions of operational modes (master/slave)
- More clear explanation of clock polarity and phase configurations
- More clear explanation of SPI data word concepts and configurations
These changes make the API easier to understand for developers
implementing drivers or applications using the SPI interface.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Update release_rx_buffer return value to match API documentation.
Cleanup register_ept workflow - remove unused variable.
Signed-off-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Increase stack size of supplicant thread to fix crash seen during
enterprise mode connection. Increase heap requirement of hostap
to handle TLS processing failures.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Convert z_clock_hw_cycles_per_sec to unsigned int to increase
supported frequency range.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Type case CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC to uint32_t
while defining sys_clock_hw_cycles_per_sec_runtime_get()
to extend the range of frequency to 0xffffffff.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Introduce a snippet for configuring IPv4 and IPv6 over Wi-Fi support
in networking samples.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a dedicated "build_all" test for the NEORV32 and its peripheral
drivers. These drivers depend on the NEORV32 SYSINFO (syscon) and thus
cannot easily be built for non-NEORV32 board targets.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
zephyr:board:: directly already automagically includes board image in
the overview card, no need to also have it in the body of the doc.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The mbox sample uses bellboard events enabled by default
in the nRF54H20dk board definition.
Thus, it's not easily obvious that IRQ bitmask must be aligned
when other mbox/bellboard channel is used.
Add comment to the nRF54H20 overlays.
Inform that bellboard channel used for RX must be enabled in
the 'nordic,interrupt-mapping' property.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
sizeof('\0') is misleading as it will return 4 instead of 1,
since it will evaluate to sizeof(0), which returns the size
of the `int` type. Modify the expression to use sizeof(char)
with a comment.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes typos in the BT_DEVICE_NAME_GATT_WRITABLE_SECURITY and
BT_DEVICE_APPEARANCE_GATT_WRITABLE descriptions.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Block the SoC from re-entering sleep modes while the RX line is active,
if the RX activity previously woke the device from the sleep states.
This stops the device from continuously transitioning between the two
modes and improves responsiveness.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Fix dropped `UART_TX_DONE` events when poll out and async APIs are used
on the same port. Clearing `tx_poll_stream_on` is required to prevent
`uart_stm32_isr` from prematurely clearing the TC status bit.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Fix typos in stm32 flash sizes value introduced by commit 0e1ffc7beb
("samples: code_relocation_nocopy: update macro to get flash size").
Fixes: 0e1ffc7beb
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
- Add spaces around /* ... */
- Fix a typo and remove a stray space in the description of
renesas,rz-gpio.yaml to make it visible in doc html
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
This is the initial commit to support pinctrl driver for Renesas RZ/V2L
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
This adds minimal support for board RZ/V2L-SMARC
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
