Providing the right config options and a new test scenario,
coredump_backends test will run under the in-memory backend.
Signed-off-by: Tomasz Bursztyka <tobu@bang-olufsen.dk>
For testing purposes only. Testing the fatal error handler or
a coredump backend. Or just out of curiosity.
Signed-off-by: Tomasz Bursztyka <tobu@bang-olufsen.dk>
Only meant to be used on platforms that would not wipe the RAM on reboot.
This won't work if the platform is halted and restarted as RAM is
volatile, obviously. A relevant fatal error handler needs to be provided
to reboot.
Signed-off-by: Tomasz Bursztyka <tobu@bang-olufsen.dk>
This might come in handy for other coredump backends too, not only flash
one. Obviously: changing the logic to use the coredump generic API instead
of the flash backend's internal functions.
Adding a better output, following how the coredump is actually created:
parsing and printing headers, and their respective content.
Signed-off-by: Tomasz Bursztyka <tobu@bang-olufsen.dk>
Reintroduced by commit 8c9af42a63
("portenta_h7: enable onboard regulator") and becomes annoying to
remove again and again. There is also no test feature usb_cdc.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
get_maintainer.py does not support recursive glob.
In the future, get_maintainer.pl could take advantage of
glob.translate()[1]. Unfortunately, glob.translate() is only supported
from Python 3.14 which is not yet widely adopted.
Meanwhile, just avoid to use recursive globs.
[1]: https://docs.python.org/3/library/glob.html#glob.translate
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
The `tests/subsys/logging/log_stack` test no longer exists.
Remove a reference to the test from the document.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add missing entry for DAI_NXP_MICFIL, which was accidentally removed
during the transition to SDK-NG.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The new SDK-NG is missing some EDMA-related headers/drivers because of
which the 'dma_nxp_edma' driver no longer compiles with it. Mark the new
SDK as unsupported for this platform until this is fixed.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Fix incorrect payload count at CIS Establish due to existing
CIG event overlapping the ACL event at the instant when the
CIS gets the active flag set.
The overlapping CIG event picked up the new CIS that had its
active flag set in the current CIG event instead of at the
actual CIS offset which is in the next CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS offset calculation due to use of decremented ACL
event counter, where as the CIS offset is inquired in the
next ACL event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect CIS offset in use if instant is picked from
the peer sent CIS RSP PDU. Instead, keep the instant that
was sent in the CIS REQ PDU as the instant to send in the
CIS IND PDU.
This fixes CIS failed to be established when dissimilar
ACL and ISO intervals are in use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect payload count at CIS Establish due to existing
CIG event overlapping the ACL event at the instant when the
CIS gets the active flag set.
The overlapping CIG event picked up the new CIS that had its
active flag set in the current CIG event instead of at the
actual CIS offset which is in the next CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Peripheral CIS sorted by CIG implemenation to use CIS
offset stored in LLL context which is the correct offset
from the CIG anchor point. CIS offset in the ULL context
is the offset from the ACL anchor point at the time of
the CIS establishment.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS event_count_prepare use missed as part of fixes
related to commit be91cfedfb ("Bluetooth: Controller: Fix
incorrect event_count when CIG overlaps").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Sets LinkServer as the default runner for lpcxpresso55sXX boards.
- Unifies the "Configuring a Debug Probe" chapter
for lpcxpresso55sXX boards.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
- Fixes declared memory region sizes in .yaml and .rst.
- Adds SRAMX linker region.
- The lpcxpresso55s36 linker memory regions are:
FLASH =246KB, RAM=112KB, SRAMX=16KB.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The settings shell returned an unhelpful message when provided
the incorrect arguments. This changes the returned message to
provide the correct usage message.
Signed-off-by: Tim Gibson <timmaxgibson@gmail.com>
dt_chosen_enabled argument was incorrect and it was always returning
n so option could not be used.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This test is being skipped for the last 3 years, had lots of issues when
it was introduced. No need to keep it in the tree.
If fixed and made to work again, we can always add it back.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Few tests are being skipped for no goot reason (anymore). Add some
coverage using few platforms that work with intention to expand if all
works well and if needed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some platforms were excluded due to issues that were fixed or resolved
themselves. Enable those platforms again and remove the comments related
to the issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a hack that is used until we have proper IP routing
in place. The code has now special check that makes sure that
we only route IP packets to VPN interface when the packet is
destined to that subnet. So if destination IP address does
not belong to VPN interface subnet, it is not routed there.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of calling various network interface API functions to get
the network interface and related source IP address, have a single
function that can return both data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for setting up VPN enablers in the network stack.
These are to be used by the VPN implementation like Wireguard.
Signed-off-by: Jukka Rissanen <jukka.rissanen@gmail.com>
If CONFIG_NET_DHCPV4_OPTION_PRINT_IGNORED is set, then adjust the
tests as we no longer get so many events.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently we ignore the received domain name but make sure we
print it in order to avoid unknown option prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently we ignore the received host name but make sure we
print it in order to avoid unknown option prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently we ignore the broadcast address but make sure we
print it in order to avoid unknown option prints.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add board support for the Arduino Giga display shield.
Signed-off-by: Ibrahim Abdalkader <i.abdalkader@gmail.com>
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The passive level of the clock does not change instanteneously when
it's set using function XMC_SPI_CH_ConfigureShiftClockOutput().
This means that the passive level of the clock can be in the wrong
state when the chip select goes low.
Fix this by adding a small delay when the polarity changes to allow
the clock to return to the proper level.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
As part of relocation, this script matches each source file to its
corresponding object file. This matching is done inside of get_obj_filename
which is called once per source file.
get_obj_filename traverses the entire build directory on every invocation.
This is unnecessary since built object files don't change. On a
sufficiently large project (like mine), this script takes over a minute and
the majority of that time is spent needlessly traversing the build
directory again and again.
Caching the list of object files enables this script to run in less than a
second.
I tested by building my project (which enables the relocation script) and
comparing memory breakdown before / after.
Signed-off-by: Galen Krulce <gkrulce@meta.com>
Commit removes device key candidate if provisionee failed
during device key refresh procedure or mesh reset has been
called in between. Otherwise, device key candidate gets
stuck in the internal trusted storage of crypto library.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Avoid compiler warnings for zero-length-arrays in the http-server. By using
memcpy instead of strcpy.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Besides E51 and U54 SMP variants, one can target
a single core of U54 for testing purposes.
There is already CONFIG_RV_BOOT_HART=1 that specifies
the starting HART ID for the SMP core.
Set CONFIG_MP_MAX_NUM_CPUS=1 as well to limit
the number of physical CPUs visible at build time
so that Zephyr code tries running only on the selected one.
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Now that nRF70 by default uses zero-copy fine-tune the configuration to
get optimal memory while getting peak throughputs.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This uses the network packet as is without the need for a copy all the
way till the packet is handed over to RPU.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Test was assuming that CONFIG_SYS_CLOCK_TICKS_PER_SEC=100 but such
frequency is not well supported on SoC which are based on 32768 Hz RTC
clock. Align test to be able to work with different sys_clock
frequency by converting previously 20 ticks to milliseconds.
Set CONFIG_SYS_CLOCK_TICKS_PER_SEC=32768 when system clock is using
Nordic RTC timer driver.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
