- Reduces the ram disc sector count from 400 to 220.
- Saves about 90KB of RAM. All tests still passed.
- Allows platforms with less RAM to run
the ramdisc_small.overlay test.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Disable automatic LFCLK selection for GRTC during driver initialization.
For Zephyr applications it is selected by `sys_clock_driver_init()`
depending on configuration and DTS.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Selection of the LF clock source for the GRTC should be performed
as early as possible, before starting GRTC.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
There are a couple things going wrong in this test code right now.
First of all, there is no syncrhonization of when the async polling
thread should start polling, causing sometimes the poll to fail on tests
before the async test ran. Add a semaphore to fix this.
The lock test was setting up a nonsense NOP transfer of 0 length.
This might cause unexpected behavior and is not the point of
this test case.
But, still we should add a seperate test case specifically for
testing this instead.
Also add a teardown function to release the locks to allow other test
cases to run in case of some failures.
Also a minor change to remove some ARG_UNUSED invocations for some
arguments that are actually used.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Change OpenOCD version regex to be compatible again with format strings
not having a space or newline immediately after the version nr.
Modified regex has been verified with the strings listed below.
Ubuntu:
"Open On-Chip Debugger 0.11.0"
ADI:
"Open On-Chip Debugger (Analog Devices 0.12.0-1.1.1) OpenOCD 0.12.0 (2024-
08-27-17:25)"
Zephyr SDK:
"Open On-Chip Debugger 0.11.0+dev-00728-gb6f95a16c (2024-02-17-23:51)"
Infineon:
"Open On-Chip Debugger 0.12.0+dev-5.2.1.3248 (2024-08-08-17:29)"
Espressif:
"Open On-Chip Debugger v0.12.0-esp32-20240318 (2024-03-18-18:25)"
Fixes: 1c05f2121c
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Fix USB controller base address.
rp2040 was fixed in a10f2e8 and the rp2350 uses the same base address.
Signed-off-by: James Turton <james.turton@gmx.com>
We updated the MEC5 portion of hal_microchip. Update Zephyr west
manifest to use the updated HAL.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Fix two instances where switch-case labels were followed immediately by
a declaration, which is generally invalid and can cause compilation
failure.
Signed-off-by: Kesavan Yogeswaran <hikes@google.com>
- Extended the DIS sample to showcase all possible
fields using placeholder values.
- UDI issuer strings use a 'private' ODI which is
unregistered.
Signed-off-by: Sean Kyer <Sean.Kyer@analog.com>
Due to sizeof('\0') evaluating to 4 bytes instead of 1:
- Each UDI field had 4 instead of 1 'zero byte' appended
(as specified by BLE spec).
- Any field of length 4 was being skipped entirely.
Signed-off-by: Sean Kyer <Sean.Kyer@analog.com>
Add a basic RFP runner that supports the `flash` command targettting
the Renesas Standard Boot Firmware.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
Fixes typo in the event name.
Changes the struct to also use _ev instead of _rp as it
is an event and not a response.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The publication period is defined by Steps and Resolution.
At BLE Mesh protocol level, the period is encoded in a byte
where first LSB 6 bits correspond to PerSteps and the last
two to PerRes. There is an issue on how the code at
`subsys/bluetooth/mesh/shell/cfg.c:model_pub_set` is encoding
these two values into the publication period byte.
This is commit fixes issue #87780
Signed-off-by: Raúl Gotor <raulgotor@gmail.com>
Apply the following patches to the v4.1-branch of rust. This fixes an
issue with CI.
349164d630a samples: blinky: Remove incorrect integration platform
b0866632d42 samples/tests: Ensure test/sample names are unique
Signed-off-by: David Brown <david.brown@linaro.org>
If the connection handle given to a Read/Write Authenticated Payload
Timeout HCI command is a CIS or BIS handle, the error returned has to
be BT_HCI_ERR_CMD_DISALLOWED with the new TCRL
Fixes EBQ test failures in HCI/BIS/BI-14-C, HCI/BIS/BI-15-C,
HCI/CIS/BI-20-C and HCI/CIS/BI-22-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
The Nordic nRF54L series ICs use RRAM instead of flash. This implies
that erasing the internal storage before writing the new firmware is not
required anymore (unlike NOR flash, which does).
Note that RRAM on nRF54L devices is not physically paged, and paging is
only artificially provided, with a page size of 4096 bytes, for an easier
transition of nRF52 software to nRF54L devices.
In order to speed up the flashing operation and avoiding doing wasteful
write operations on the RRAM, default to ERASE_NONE for ICs in these
series.
A new ``--erase-pages`` command-line switch has been added to allow
users to keep erasing the pages that will be written to the firmware.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Commit fixes bug when corresponding group ID was never
incremented for independent corresponding relationships.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Updated the bsim-tests workflow to exclude all .rst files.
As per GitHub docs:
The order that you define paths patterns matters:
A matching negative pattern (prefixed with !) after a positive match
will exclude the path.
A matching positive pattern after a negative match will include the path
again.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
No functional change. This is only so as to adopt a versioning scheme
where the Zephyr version of the action is considered more recent than
the upstream version (here, v1.1.1) by means of using dots instead of
dashes.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add checks that we will be able to catch invalid compression bit in
response CNAME handling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow only 0xc (0b11) as two highest bit to mark the compression
when parsing the CNAME response. See RFC 9267 ch. 2 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add checks that we will be able to catch recursive name pointers and
abandon the response for CNAME handling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure that the CNAME handling checks recursive name pointers
and fails the response if recursion is detected.
See RFC 9267 ch. 2 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Boards that have sysbuild enabled in Twister will have the build folder
for the hello_world sample in a subfolder, so update the code
accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Added support for wpa-wpa2 mixed mode in ap enable
- Added support for WPA3 Transition mode in STA connect
Signed-off-by: Nitin Pandey <nitin.pandey@silabs.com>
The closing comment for CONFIG_SDMMC_STACK #ifdef directive was
incorrectly labeled as CONFIG_SDIO_STACK. This commit corrects the
comment to reflect the correct configuration macro and improve code
clarity.
Signed-off-by: Mirai SHINJO <oss@mshinjo.com>
The power supply configuration is already set during
the early H7 soc init.
Let the clock initialization handle the voltage scaling.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This show a nice widget to switch between the various board targets and
see their respective list of supported features.
The original HTML content of the page is preserved and JavaScript code
"patches" the page on-the-fly. This is so that the actual HTML content
(that e.g. search engines see) is complete and indexable (as well as to
provide useful information for folks who might have JavaScript disabled
altogether).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Revision might be `0` so update the condition to not inadvertently
exclude boards with such revision number.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The board revision should appear right after board name, not after the
qualifiers as was previously done.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This probably got lost in previous refactoring but this variable is
used in a few CSS rules so it better point to an actual font stack
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
clang recently began providing predefined __INTN_C/__UINTN_C macros
resulting in macro redefinition warnings in toolchain/llvm.h. This
change was landed in clang in late Jan. 2025 and clang/LLVM 20 is the
first official release that has this support (see the PR linked below).
Prefer the definitions provided by clang and avoid redefining these macros
for clang versions 20 and later to avoid said warnings.
Link: https://github.com/llvm/llvm-project/pull/123514
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
When deriving the new LK, remove the old LK if it exists.
Store the derived LK if the flag `SMP_FLAG_BOND` of LE SMP is set.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The flag `BT_LINK_KEY_SC` of LK will also be set when derive LK from
LTK.
It is a incorrect behavior.
The flag `BT_LINK_KEY_SC` should only be set if the flag `BT_KEYS_SC`
of LTK has been set.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
