Each MCU initialization hooks will attempt to call
into the API to connect to the bsim phy and, if the
user requested it thru command line, delay its boot.
Doing this for all MCUs is best to ensure it is done
even if there is no image for the other MCU,
but results in the calls being done twice if there is
2 MCUs images, which results in the simulator API giving
a warning about it being likely an error in the app.
To avoid this problem, let's have this be called
only once.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix missing Extended Advertising terminate event and
advertising scheduling not being stopped.
Under race conditions, auxiliary event is aborted without
the generation of done extra event which is suppose to
stop the scheduling when max events count is used.
The fix now generates the done extra event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix periodic advertising sync window calculation to include
the scheduling resolution margin, i.e. be double as with
the event jitter value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allows device tree to enable usage of the controller feature
where HS clock is disabled when not in use, which is good
for reducing power consumption if MIPI DSI is mostly idle.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Previous version of dsi_mcux_2l hardcoded some MIPI DSI
transfers to use high speed mode but others used low power mode.
Now dsi_mcux_2l will use high speed mode by default for all
transfers unless a new msg flag is set to indicate the
transfer must use low power mode. Note that the new flag
is different than the existing MIPI_DSI_MODE_LPM flag, which
so far only applied to cmd messages sent in video mode,
or could be interpreted as for all messages, but would not
allow per message mode control.
This new message flag allows client to control transfer
mode per message transfer.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Previous version hardcoded the SMARTDMA slot to either
RGB565 or RGB565_SWAP, but that would be incorrect
if the pixfmt was RGB888. Use the mipi device
pixfmt to set the slot.
Signed-off-by: Mike J. Chen <mjchen@google.com>
This commit adds an implementation of poweroff, which first
uses SUPC to enable all defined wakeup sources (except for
sam4l), followed by entering backup mode.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This allows users to set `EXTRA_*FLAGS` variables when using sysbuild.
If these flags are provided in both local and global sysbuild scopes,
then only the local ones will be used for a given image. This is to
circumvent issues with mixing space-separated and `;`-separated lists.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Now the API to manage GPREGRET register is unified for all devices
having one or more GPREGRET entries.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Now it is needed to explicitly use NRF_GPIOTE1 instance
in nrfx_gpiote driver for non-secure builds.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
One of the nrfx_uarte event structure members was renamed,
so the sample code has to be aligned.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Underlying nrfx driver was modified so now it forwards the event
to the user callback only if it was enabled.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Refactored nrfx_uarte driver uses atomic types internally,
so glue layer in TF-M needs to include them.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
The new "net sockets" command will utilize the object core
support to track and show information about BSD sockets that
are created in the system. This command is able to show info
for all network sockets (native, offloaded etc) in the system.
Example of the output of the new command:
uart:~$ net sockets
Creator Name Flags FD Lifetime (ms) Sent Received
main af_inet46 6ST 0 3260 819 498
main af_inet46 4ST 1 2110 469 142
main af_inet46 6DU 2 2110 9941 9941
main af_inet46 4DU 3 2110 1375 621
4 active sockets found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The BCM2711 SoC exposes 58 GPIOs. The first 28 (bank 0) are accessible
to users via the 40-pin header, while the others (bank 1) are used for
controlling on-board peripherals.
This also update doc of `rpi_4b` board.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
No reason to declare it per node, as it is almostly shared by all
peripherals.
Also introduced `DT_FREQ_M` macro for better readability.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
* defconfig is located under `boards/arm64/` instead of `boards/arm/`
* 64-bit mode (`arm_64bit=1`) is required to boot
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Define the ZEPHYR_{MODULE_NAM}_MODULE option for all available modules.
Right now only modules defined as 'kconfig-ext' has this symbol defined
which may cause problem if the build wants to check if a module not
using this options is available.
This allow us to do something like:
comment "mbedTLS module not available."
depends on !ZEPHYR_MBEDTLS_MODULE
or make a feature depends on the module be present.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This checks that if connect() timeouts, we check TCP pointer
properly in select() and poll() in order to catch the situation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The writefds is typically set if there is an error while
waiting for example the connect() to finish. So check if
the user supplied the writefds and update it accordingly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we try to connect to a port which no socket is listening to,
we will get a packet with "ACK | RST" flags set. In this case
the errno should be ECONNREFUSED instead of ETIMEDOUT like we
used to return earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Increase reference count already when initial SYN is sent.
This way the tcp pointer in net_context is fully valid for
the duration of the connection.
Fixes#63952
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add uart1 pin assignment for the raytac_mdbt53v_db_40_nrf5340 board.
This is required in order to support building TF-M for the NS variant.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add HW flow control pins for raytac_mdbt53_db_40_nrf5340 board.
Use the same pins as the cpunet has been assigned, as the RX / TX lines
was also using the same as cpunet.
Remove bias-pull-up as uart1 using same pins on cpunet does not have
this either.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add uart1 pinctrl assignment to nrf5340 Audio DK.
Assigned according to Schematic for this board.
Uart1 pins needed by TF-M when using the NS board variant.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add generic SoC support for the supported nordic SoCs:
- nrf5340
- nrf9160
- nrf9120
Add generic SoC support by taking board specific configurations from
zephyr devicetree and kconfig.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This reverts commit 0781a86862.
BASEPRI is only functionnal if mainline extension is present.
If not, it is "RES0". See: Arm®v8-M Architecture Reference Manual D1.2.5.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
According to conditions in the DFU spec section 6.1.3.7 (Sending a
Firmware Update Status message) and in 'Idempotency' part of section
6.1.3.4 (Receiving a Firmware Update Start message), the FU Server
should not update internal state when 'Wrong Phase' error condition
is triggered.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Add installation instruction for adding nanopb to the west workspace.
This is required because it is optional and not installed by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This test cannot be run in this architecture as it does not
support userspace.
Today it is filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Two substests cannot be run in the posix architecture
as they require userspace.
Today they are filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These tests cannot be run in this architecture as it does not
support coredump.
Today it is filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test cannot be run in this architecture as it does not
support userspace.
Today it is filtered by kconfig, which works but spends
time running cmake.
As native_posix is a default test platform it is better
to filter it alltogether by arch, which saves quite a lot
of time.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
