We are using standard notation to differentiate optional and mandatory,
so, no need for a heading.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Adding support for remaining CCP test cases.
Also removing callback descriptions from btp files not to get confused
with header files.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Added a unit test for the platform.py module.
It covers 99% of the code. The 1% is unreachable.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Improve a depends on the host libC.
It is technically correct, but NATIVE_LIBC
is shorter and clearer than "ARCH_POSIX && EXTERNAL_LIBC"
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's try to use the host unistd.h when building with
the host library only, instead of assuming
that the native boards are always built with it.
This fixes a build error when building for native boards
using minimal libc.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
this corresponds to soc/arm/nxp_lpc/lpc55xxx/soc.c:129. also, 16MHz is
used on the lpc55s69-evk.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
lcov 2.0 added support for processing coverage data in parallel, which
provides a large speedup when processing many files, at the cost of some
additional overhead. When running the Chrome EC tests with coverage,
parallel reporting on a 36C72T machine reduces the time spent generating
coverage reports by 40 minutes (from approximately 1 hour to 20 minutes
total runtime), at the cost of about 3x greater CPU time overall
(assumed to be overhead for parallel processing, likely from spawning
much larger numbers of subprocesses).
The level of lcov parallelism is taken from the --jobs option passed to
twister, allowing lcov to choose if unspecified.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
This moves handling of changed lcov arguments in lcov 2.0 into helper
functions, significantly simplifying Lcov._generate() to reduce the
visual noise of extra arguments that are required but unimportant to the
task at hand.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Adds FIFO support to the latency_measure benchmark. This covers
both k_fifo_put() and k_fifo_get() with and without context switches
as well as variations for userspace support.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Adds LIFO support to the latency_measure benchmark test. This covers
both k_lifo_put() and k_lifo_get() with and without context switches
as well as variations for userspace support.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Changes the summary lines used in the latency_measure benchmark
so that they follow a consistent pattern.
OBJECT action.<brief details about action>
This makes it easier to locate results belonging to a particular
object group. It also has the benefit to keep results colocated
should the output be sorted by an external tool.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Moves the inclusion of the app_memdomain header file into the
tests' utils.h so that any file that includes this can make
use of the BENCH_BMEM macro.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
DLCI receive buffer may overrun if data is not processed fast
enough. This error was not reported before this patch, resulting
in unexplained missing bytes.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Makes it clearer what that bit means:
If set, the channel has capacity to send at least one PDU.
If unset, the channel ran out of credits and won't be able to send
anything until the peer sends credits back.
Also add debug logs.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Prevents confusion, as the similarly-named `l2cap_send()` also unrefs the
buffer if it fails to send.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This commit sets linkserver as the runner, if none was set in the
board's board.cmake file. This change will enable NXP to make linkserver
the default runner for the NXP boards.
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
This adds user configurable CONFIG_LOG_MIPI_SYST_DISABLE_TIMESTAMP
Kconfig option to use it for macro MIPI_SYST_PCFG_ENABLE_TIMESTAMP.
Moving macro definition of MIPI_SYST_PCFG_ENABLE_TIMESTAMP from
mipi-sys-t library to platform.h which defaulted to undef.
CONFIG_LOG_MIPI_SYST_DISABLE_TIMESTAMP gives flexibility to users
when needn't use mipi-sys-t protocol timestamp.
Signed-off-by: Fang Huang <fang.huang@intel.com>
Add functions to do XOR on arrays of memory, with one that
takes arbitrary sizes and one for 32 bits and 128 bits as
those are common sizes for this functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
lwm2m_engine_pause() caused deadlock if it was called within
engine thread.
Remove while loop from lwm2m_engine_resume().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add short delay before triggering registration update. This allows
postponing the update from application side if needed.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
If an instant based remote procedure 'overtakes' a local ditto
the local procedure will be 'completed' by remote rejection
but collision flag would not get set ensuring that a new local
conflicting procedure cannot be started before the remote is completed.
This can thus lead to invalid local initiation.
Added unittest to cover case
Fix by ensuring collision flag is set also in the above mentioned
scenario.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This change marks each instance of the 'spi_driver_api' as 'static const'.
The rationale is that 'spi_driver_api' is used for declaring internal
module interfaces and is not intended to be modified at runtime.
By using 'static const', we ensure immutability, leading to usage of only
.rodata and a reduction in the .data area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change marks each instance of the 'api' as 'static const'.
The rationale is that 'api' is used for declaring internal
module interfaces and is not intended to be modified at runtime.
By using 'static const', we ensure immutability, leading to usage of only
.rodata and a reduction in the .data area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Cache configured radio channel and apply them only when a relevant
radio task is requested.
This allows to configure the channel in the transmit metadata, thus
avoiding unneeded `nrf_802154` API calls in some scenarios.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Remove `IEEE802154_SELECTIVE_TXPOWER` option.
Cache the tx power value in nRF5 driver and make use of it on each
operation.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
enable CONFIG_USB_DC_HAS_HS_SUPPORT when we use only OTG_HS
and not OTG_FS.
in that case TEST_BULK_EP_MPS (Endpoint max packet size)
equal 512 and not 64
it is the case for nucleo_h723zg and for nucleo_h7a3zi_q
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Enable FlexTimer (FTM) as a PWM controller for this board. Use the RGB
LED controlled by FTM0 as PWM-LEDs for the samples and tests.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Rework the interrupt handlers of the FTM driver to support SoCs on
which FTM channels and overflow are routed through individual
interrupts, as opposed to a single OR'ed interrupt.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Set CONFIG_MCUBOOT_BOOTLOADER_MODE_OVERWRITE_ONLY=y
for lpcxpresso55sxx boards.
Synchronize with their default MCUBoot configuration.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Give option in soc.c to initialize the MIPI DPHY clock from the default
AUX1_PLL, or from the FRO using CONFIG_MIPI_DPHY_CLK_SRC_FRO.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
