- Initial support for RA6M2 SoC
Signed-off-by: Tri Nguyen <tri.nguyen.wj@bp.renesas.com>
Signed-off-by: Danh Doan <danh.doan.ue@bp.renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
First commit to support serial driver running on r_sci_uart for Renesas
RA devices.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Background of this modification is to make gpio driver code
provided by Renesas vendor to be an official support for Renesas
MCU on Zephyr
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Update pinctrl driver which used for Renesas RA series with
PFS secure register
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
This extension was created to overcome C domain/Breathe limitations.
This is no longer needed as we link directly to Doxygen pages.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
DHCPv4 server will probe the offered IP address (send ICMP echo request)
and wait for 1s (default) before offering the address. STA sends out DHCP
discover, but gets no response. Windows automatically assigns the network
card an IP address of 169.254.xx.xx.
So set timeout for ICMP probe sent by the server to 100ms.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
When user_data is not zeroed-out, the API returns an error. Downgrade
the API error to a warning log instead.
Introducing this check (#76489) broke a few PTS tests, as user_data is
not initialized by `net_buf_alloc()`. Doing so is in discussion:
https://github.com/zephyrproject-rtos/zephyr/issues/77088
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
It is already checked against `NULL` in the codepaths that take the
`ops` struct as a parameter.
Add a note in the documentation to make the requirement official.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
For two reasons:
- prevent exposing the previous user's info to the new user
- make NULL checks on user_data work
Since we don't really have a field that specifies what part of the
user_data array is valid, we have to rely on other checks.
Such a check, if user_data contains a callback, is comparing against
NULL before calling said callback.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
In order to reduce excessive false positives for Coding
Guidelines checks in CI, maintain a list of paths that are
marked "safe" for reserved names to be implemented or declared.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Implements the driver for the OLED SSD1327 controller.
This driver is based on the ssd1306 driver due to their similarities.
Only the SPI control bus is supported.
Signed-off-by: Luc BEAUFILS <luc.beaufils@savoirfairelinux.com>
Some tables used more than 120 characters per line. This commit compresses
the formatting of the tables in the documentation.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
This commit add the description of the fmc in the SoC stm32l5, and the
description of the screen controller st7789v in the board stm32l562e-dk.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Add support for using the stm32 fmc to interact with a display
controller, using Intel 8080 protocol with a 16 bits parallel bus.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Macros to write specific peripheral registers were removed as a
compile flag was added to hal_espressif requesting struct bitfields
to have strict volatile access (thus 32-bit access), allowing for
the cleanup.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Calling k_msleep() leads to a int64_t division, causing udivdi3 and
similar to be linked in.
Keep the outer API the same, but switch to k_timeout_t before passing
to the inner API. This saves 1916 B of ROM.
Signed-off-by: Michael Hope <mlhx@google.com>
Path loss monitoring does not work without LE Power Control
also enabled in the controller, so update the dependencies
in the kconfigs so path loss monitoring selects power
control.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Path loss monitoring was not being enabled anywhere, meaning
that issues could be merged in without catching the issue.
This commit adds a test case to build the shell with path
loss monitoring enabled to catch issues.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
callback_list was renamed to conn_cbs in commit 3eb975d.
However plm callback was missed due to it not being built
anywhere.
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Transmit/write buffers are expected to be constant values given to the
operation to transmit but not mutate. Seperate the OP_TX and OP_RX
operation description unions.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This log message does not need to be repeated 10 times at the INFO level
when the same information is provided after all the retries are done:
```
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Legacy card detected, no CMD8 support
<inf> sd: Card does not support CMD8, assuming legacy card
```
to
```
<inf> sd: Card does not support CMD8, assuming legacy card
```
Signed-off-by: Jordan Yates <jordan@embeint.com>
Added python-tk to the brew install statement.
In order to use the zephyr gui tools python must also have the
"tkinter" (python tk interface) tools available.
tkinter is NOT part of 'python3' through homebrew on macOS.
fixes#76811
Signed-off-by: Eric Southam <eric.southam@lvt.com>
3506a7925a originally put it, and
24082d582f removed it.
The `pm_s2ram` group needs to belong to some group to not show up in
the topmost `Modules` list.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
