i.MX 93 EVK has a series of digital MUXes controlled by ADP5585 GPIO
expander. This commit adds board level initialization to such MUXes to
control these MUXes.
Signed-off-by: Chekhov Ma <chekhov.ma@nxp.com>
Add additional Microsoft OS 2.0 USB descriptor structures. These are
documented in the Microsoft OS 2.0 Descriptors Specification.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Support rgpio/lpuart peripherals
Support linkserver/jlink debug ways
Test cases: hello_world; button; blinky; synchronization; philosophers
There is one limitation with flashing and debugging the SoC's second
core(M7) that will be addressed with furture submission
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
RGPIO model on RT1180 is same with igpio, however,
current driver can't support.
Update gpio driver to support gpio pad control
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
The offset of the peripheral is abstracted so that
the peripheral can be defined in RT118x.dtsi,that
is a common dtsi file for RT1180.
Due to cm33 core, add ns/s files which are served
on different status for cm33 core.
Add rt118x_cm7 dtsi file
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Add new RT118x device, due to structure is different from rt11xx series.
Boot header also differ from rt10xx and rt11xx, so add support for boot
container.
define new container name and new container tag
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
errno is a reserved macro. Use ret instead.
Fixes a bug introduced with commit
bfb541ccbe.
Fixes#76751.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The processing order is relevant if the IRQ handler call is delayed and
multiple interrupts are pending. Handle USB SoF before other interrupts
to ensure that it would be reported before other USB events (e.g. before
completed USB data transfers).
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add DMA channels to test overlay files as DMA support is now available
for MAX32 I2C driver.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
MAX32 I2C peripheral can benefit from DMA transfers. This patch adds
DMA support for transactions made in controller mode.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
This adds platform_allow to limit the scope of platforms to
build and run. This avoids the need to constantly nudge
the platform filter lists to exclude platforms which fail
to build or run due to incompatible kconfigs.
Fixes#76945
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit fixes potential unpredictable behavior, caused by using
the ^ form of ldmia instruction, while exiting an exception in SMP
mode on Cortex-A/R.
Change:
Use "pop" instead of "ldmia" to restore user mode registers while
exiting from an exception via `z_arm_cortex_ar_exit_exc`.
Reason for change:
Processor mode is always set to system (MODE_SYS) before calling
`z_arm_cortex_ar_exit_exc` and hence, the user mode register can be
accessed directly without the ^ form of the instruction. Also, LDMIA
instruction is UNPREDICTABLE in SYStem mode.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
This commit fixes the unpredictable behavior, caused by using the
^ form of stmdb instruction, while entering an exception in SMP mode
on Cortex-A/R.
Change:
Use "push" instead of "stmdb" to store user mode registers on
stack while entering an exception in SYStem mode.
Reason for change:
As reported in discussion/#75339, processor is already in SYS mode
after entering `z_arm_cortex_ar_enter_exc()` in an exception and
using stmdb is UNPREDICTABLE in system mode. Also, the user mode
register can be accessed directly without the ^ form of the
instruction. The solution suggested to fix this is to use
`stmdb sp!, {r0-r3, r12, lr}` which can save the user registers,
update the SP and avoid an extra instruction.
We use "push {}" instruction instead since it is the preferred
mnemonic over `stmdb`.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
This commit enables pyOCD support for the STM32F429I Discovery board.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The commit ad63ca284e replaced
default value of 65535 to UINT16_MAX. That change might cause
confusion as it suggests that the HEAP size is limited to UINT16_MAX.
For this particular scenario, 65535 bytes is a resonable amount of
HEAP to allow both Wi-Fi and BT working in coexistance, which could be
increased as per application.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The RTC alarm and update fakes where not defined correctly. This
commit adjusts them to match the RTC API.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Sample was modified to enable pull-down when using EXT1 pins for
wake-up on deep sleep sample in order to simplify testing in case
user doesn't notice external pull-down will be needed otherwise.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Clock is disabled at startup for LP core peripherals, greatly
improving power consumption in deep sleep mode.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Port of similar change in arm64 that eliminates exclusive load/store
instructions, which may not work when MMU/MPU/cache are disabled.
Based on: 7904c6f0f3
Signed-off-by: Stan Skowronek <stan@corellium.com>
The base address of H2RAM can be as large as KB(CONFIG_SRAM_SIZE), so
the mask for the H2RAM address should be (KB(CONFIG_SRAM_SIZE)-1).
This PR corrects the size of the mask.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Let's link from the deprecated instructions,
To increase visibility and hopefully avoid developers forgetting to
do so.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's link to the deprecated instructions.
To increase visibility and hopefully avoid developers forgetting to
do so.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's link from the deprecated instructions.
To increase visibility and hopefully avoid developers forgetting to
do so.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
1.16 was not meant to be a release, and 1.14 was long ago.
Let's use as example something much more recent.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When deprecating APIs,
let's tell users to add to one GitHub issue tracking all
deprecated APIs meant to be removed,
so the process is simpler and hopefully developers do it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
