The STM32 DMA driver can provide interrupts for transfers not yet complete.
However, the current implementation will clear the busy flag for all
interrupts when CONFIG_DMAMUX_STM32 is not enabled. The previous fix for
when CONFIG_DMAMUX_STM32 is enabled should also apply when not enabled.
Also if CONFIG_DMAMUX_STM32 is enabled busy flag will not be cleared when
error interrupts occur.
With this change, the busy flag is only cleared when completion interrupts
in non-cyclic mode or error interrupts occur. These are the cases where
transfer will not continue.
Signed-off-by: Carson Green <cgreen@tuta.com>
Add code to get the current frame rate and enumerate all supported frame
rates (frame intervals) of the current format.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
unlike dma v2 binding where bit 15 is reserved, dma v1 binding
needs to configure the the DMA peripheral increment offset.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
The TBS and GTBS instances can now be dynamically registered
and unregistered, which fits better for the use cases of TBS
where specific bearers can come and go depending on the
features of the device.
For example if a SIM card is inserted, then a device can
register a TBS for the provider and remove it again if the
SIM card is removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the includes for Bluetooth Audio samples so they
properly include what they use.
The includes are then used to determine which relevant APIs
to refer to in the READMEs.
Finally improve the naming and description of the samples
using the Profile names and role.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The clocking code present inside the NXP I3C is SoC specific.
This has been moved to the SoC folder which makes this driver
more flexible to clock architecture variations between SoC's
and SDK driver clock API variations.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update RT5xx and RT6xx clock init to add the code
to set the I3C dividers. This code has been moved
from the I3C driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Moves around the shell files so that they are placed nearer
to the features they expose access to.
A few changes as possible has been made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In order to reduce confusion regarding interface count
the respective warning was adjusted to better reflect
the actual state of the system.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Add Data Memory Barrier during the extended calibration of STM32U5, as it
is done in STM32Cube HAL, to avoid sporadic errors during calibration that
may result in measures that are offset from real values.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Make sure we check the checksum offloading capabilities correctly
for VLAN interfaces. Use the real Ethernet interface when doing the
check.
Fixes#78724
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Red zone was causing issues in places where inline assembly was pushing
data to stack, like arch_irq_lock, and possibly in other places.
Initially -mno-red-zone was enabled on x86_64, but was later, maybe
accidentially, disabled in https://github.com/zephyrproject-rtos/zephyr/
commit/b7eb04b3007767be9febe677924918d2422a4406
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Renamed soc from ace30_ptl to ace30.
We were previously using the wrong soc name.
The correct name is ace30.
There is only one ptl platform, but there can be several ace30 platforms.
Signed-off-by: Grzegorz Bernat <grzegorzx.bernat@intel.com>
No functional changes were made in this update.
Only code formatting issues were corrected.
This commit is necessary to preserve Git history
continuity for future changes involving the switch from ace30_ptl to ace30.
Signed-off-by: Grzegorz Bernat <grzegorzx.bernat@intel.com>
This reverts parts of commit c344771d8b
related to intel_adsp soc.
There is a dependency on device initialization that was missed.
Reverting until we have a proper way for migrating to hooks.
Fixes#78880
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit enables the user to choose whether to
allocate the video buffer from the video heap pool
or use a memory region with specific extra capabilities,
such as being cacheable/non-cacheable or using external
memory.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add pwm yml file.
TIMER0/1/2/3 support pwm, LPTIMER0/1 not.
LPTIMER0/1 provide 16bits out that not meet pwm requirement.
Co-authored-by: Mert Vatansever <mert.vatansever@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Common pwm driver for MAX32xxx MCUs
Co-authored-by: Mert Ekren <mert.ekren@analog.com>
Co-authored-by: Mert Vatansever <mert.vatansever@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Used the SMP_BT_SVC_UUID_VAL define exposed in the smp_bt header
in the smp_svr sample instead of hardcoding its value.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
Added the SMP service and characteristic UUIDs to the smp_bt module
header and used those definitions.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
C++ file compilation is actually missing the warning-as-error handling,
causing warnings in build files to be unnoticed in CI. Add a flag to
handle them as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add an explicit unsigned literal suffix (U) for addresses obtained from
devicetree, this is to work around a specific warning:
zephyrproject/zephyr/include/zephyr/arch/arm/cortex_a_r/timer.h:40:2:
warning: this decimal constant is unsigned only in ISO C90
When compling
west build -p -b qemu_cortex_a9 -T tests/lib/cpp/cxx/cpp.main.cpp98
Argueably all devicetree addresses and sizes should be unsigned but this
is enough to make CI pass, may look into changing the device.h macro as
a followup.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Drop the array dasignators as they generate a
warning: array designators are a C99 extension
warning when compiling with clang. Not too sure if this is an actual
problem or if the warning should be disabled instead but since it's just
a test it should be fine to just drop them.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
On some architecture (qemu_x86) this tests generate an unused reference
warning for the PM device structure, as nothing in the structure macro
definition is referencing itself.
Reference the struct in the device define, keep the compiler happy.
Also change one of the device priority to dodge a
'__device_dts_ord_8' causes a section type conflict with
'__device_dts_ord_9'
error with llvm.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix the compiler error:
comparison of integer expressions of different signedness: ‘const int’
and ‘unsigned int’
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a dummy byte to struct mspi_timing_cfg, for C++ compatibility, same
as what's done in include/zephyr/arch/structs.h,
include/zephyr/arch/arm/structs.h, include/zephyr/kernel/thread.h and
others.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
