Fix a type mismatch compiler warning in the c++ tests.
Signed-off-by: Yuval Peress <peress@google.com>
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Common uf2 partition configurations to avoid duplication in boards.
There appears to be a bit of confusion about exactly what a proper
UF2 partition map looks like for the nrf52840, so common dts
configurations should help to avoid confusion.
Configuration for SoftDevice v6 and v7 provided as thats what was
fouond in use in tree already.
Signed-off-by: Jacob Winther <jacob@9.nz>
An issue with some macros is that a space is added to conditional
expansions. Prevent some of these macros to get formatted.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Separating declarations of variables not referenced with #ifdef
when CONFIG_IIS328DQ_THRESHOLD is disabled.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The bt_gatt_attr_read function did not properly handle cases
where value is NULL and/or value_len is 0, or bad mixes of the
two.
The important part is here is that we do not perform the pointer
arithmetic on NULL and/or call memcpy with a NULL src with a
non-0 length.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This updates the hal_xtensa commit to latest, including:
* Adds intel_adsp_ace30_ptl SoC
* Adds sample_controller32 for MPU
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The CONFIG_PINCTRL setting is removed from the board
_defconfig files. And "select PINCTRL" is added to
the appropriate driver files.
Signed-off-by: Bill Waters <bill.waters@infineon.com>
Reverts bus clock settings. Follows MCUXpresso SDK clock settings, and
sets to output of SysPLL2 PFD3 at 198 MHz.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Spi bus controller node names should follow recommended naming
convention from DT spec otherwise DTC will report a warning.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Adds a --download-buffer-size option to the canopen runner to allow
specifying the buffer size of the SDO download.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
The buffered and internal options were not assigned in the channel_cfg,
so they would end up at a random state.
The cfg struct is now properly zero-initialized and both options can
be set using optional parameters -b and -i.
Fixes#75884
Signed-off-by: Martin Jäger <martin@libre.solar>
External projects building the documentation may not clone all modules, as
they have manifest filtering. Therefore, not having access to a module
should not produce a fatal documentation build error. Convert the error to
a debug log, so it is at least traced.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The driver enables the clock of a gpio-port if any of the
pins use the port. This is done by calling pm_device_runtime_get
when a pin is used and pm_device_runtime_put when the pin is not
used anymore.
These calls needs to be balanced. But if a single pin was configured
as GPIO_DISCONNECTED multiple times, every time pm_device_runtime_put
was called.
This caused the clock of the port to be stopped and therefore also
other pins on the same port stopped working.
This commit fixes this by keeping track of which pin on a port
has requested the clock and only call pm_device_runtime_get or
pm_device_runtime_put when the clock-request for the specific pin
changes.
Fixes#77698
Signed-off-by: Jeroen Broersen <jbroersen@interact.nl>
This case fails to build on boards having APIC TSC timer enabled.
This change is needed after moving APIC TSC timer support from
apic_timer.c to apic_tsc.c.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
User can set CONFIG_NET_SHELL_SHOW_DISABLED_COMMANDS=n to prevent
unused net-shell commands from showing. This can save flash as
the disabled commands will not be shown in net-shell listing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It is useful to know the currect status of DHCPv6 client when
printing the interface information.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow "net virtual" command to attach or detach virtual
interfaces. This is useful for device management.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add missing NULL check for public API function, so that the
function will return -EINVAL rather than crashing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Add CONFIG_SHELL_PROMPT_UART to the prj.conf file.
- Ensure the ztest_params test is flashed/run only once per Pytest session.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Make sure it's possible to register IPv4/6 addresses on an offloaded
interface. Add an extra build configuration to make sure it's also
possible when native IP stack is disabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It shouldn't be needed to enable native networking to be able to
add/delete IP addresses on network interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv4 Kconfig options which only affect native IPv4 stack should be
dependent on NET_NATIVE_IPV4, similarly as it's done for IPv6.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes wrongly returning an SMP version 2 error code as an SMP
version 1 error code instead of adding it as an error
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Allows enabling the bootloader info functionality without MCUboot
being enabled, so that other bootloaders can add hooks with their
own responses
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The I2C transfer API has been recently changed to always automatically
set a STOP on the last message, which was well documented but
implemented only by few drivers.
Unfortunately, while documented, this is a change in the current
behavior and it turns out that some applications depended on it for some
complex operations.
Add a flag to temporarily restore the old behavior, buying time to fix
the application code depending on this.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update documentation to describe the method of returning response data
to the HTTP server using the response_ctx callback parameter.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add test cases for dynamic GET/POST, where the payload is transferred
across more than one call to the dynamic resource callback.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
After introduction of struct http_response_ctx, the dynamic resource
data buffer is no longer needed for transferring data between the
application callback and the server. It is therefore removed to avoid
unnecessary copying of data.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add tests covering new method of providing a response for dynamic
resources.
Tests cover the application sending response codes and headers,
overriding "default" headers, and sending various combinations of
headers and body data. Each case is tested for HTTP1 & HTTP2, both POST
and GET methods.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Allow the application to send headers and response codes from a dynamic
resource callback by filling out a response context structure.
This also allows simple requests to be completed in a single execution
of the callback, by setting the final_chunk flag.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Running IPv6 on STM32H743 using eth_stm32_hal I had to extend
the timeout between the attempts to send Router Solicitation packets
from 1 second to 2 seconds. Else it looked liked the packet never
got sent (checked using tcpdump).
Signed-off-by: Stefan Petersen <spe@ciellt.se>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit adds support for categorizing code samples in the
documentation.
It introduces two new directives:
- `zephyr:code-sample-category::` to create a category and associated
brief description, that implicitly acts as a toctree too.
- `zephyr:code-sample-listing::` to allow dumping a list of samples
corresponding to a category anywhere in the documentation.
Fixes#62453.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
move domain.py to domain/ to make it easier to keep things organized
and e.g. add dedicated css/js resources, etc.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
