seperate the autohandler from the main
hawkbit source. This way the autohandler can
be disabled if it is not needed.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Add function to get the poll interval.
This is needed to seperate the autohandler
from the main hawkbit code.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
* Setting the adv data, scan rsp and adv aux ad data can happen on
overlapping buffers
* There can be other memcpy's that need to be changed to memmove but
these are the only ones I could reproduce the issue and since memmove
has a performance penalty, I left the others as is.
Signed-off-by: Yago Fontoura do Rosario <yafo@demant.com>
Remove the `work_q` parameter from `NET_SOCKET_SERVICE_SYNC_DEFINE` and
`NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC` as this feature was dropped
during review but the removal was not 100% complete.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Added a generic function `z_shell_backend_rx_buffer_flush` to clear
the RX buffer when resuming the shell. The function repeatedly calls
the backend's `read` API until the buffer is empty or a maximum of
1000 iterations is reached. This prevents unintended command
execution after `shell_start`.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
Trigger bsim tests also on changes to the MbedTLS module code in Zephyr
side. To avoid possible regressions in bsim tests when this code is
changed getting into main.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add crypto module test kconfig option
CONFIG_WIFI_NM_WPA_SUPPLICANT_CRYPTO_TEST,
which is default n and hidden.
It is only available by developer for crypto module test.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Decoder was casting uint8_t pointers to uint64_t pointers which could
result in double word instruction which does not support unaligned
access on Cortex-M. Issue was revealed when -O3 optimization was
used instead of -Os. In size optimized version, compiler was
using word load and store instructions which support unaligned
access and issue was not visible.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This reverts commit ec7943bb18.
This commit introduced a regression.
Let's revert it so we do not block development in main.
For more information see:
https://github.com/zephyrproject-rtos/zephyr/issues/79594
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
As in all other esp32-based boards, APPCPU
does not require to have MINIMAL_LIBC as default libc.
In the past, that was required due to memory constraints,
which is not the case anymore.
This fixes build issues in `tests/lib/c_lib/common`.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
To improve performance in FCS calculation, this commit replaces
the usage of the generic `crc8` function with the specific `crc8_rohc`
function in `modem_cmux.c`.
The `crc8_rohc` function utilizes a small table approach, enhancing
the efficiency of CRC-8/ROHC variant calculations while optimizing
memory usage.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Replace `zassert` with `zassert_equal` in CRC8-CCITT and CRC8-ROHC
test cases, as `zassert_equal` is more appropriate for comparing
actual and expected values.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit introduces the `crc8_rohc` function to the CRC library,
implementing the CRC-8/ROHC (RObust Header Compression) variant.
This algorithm is widely used in networking protocols, which is commonly
found in modem subsystems.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This driver depends on its mboxes to be initialized, or the build
will fail like this:
ERROR: Device initialization priority validation failed, the sequence of \
initialization calls does not match the devicetree dependencies.
ERROR: /ipm <ipm_mbox_init> is initialized before its dependency \
/mailbox0@31f80000 <omap_mailbox_0_init> (POST_KERNEL+0 < \
POST_KERNEL+2)
Lift its priority to device level.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Modify the BAP unicast client callback structure to be a
linked list. The purpose of this is to have multiple listeners
of the unicast client changes and notifications.
This is needed for the CAP initiatior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Convert the compilation of the trigger type feature to depend
on Kconfig, following the same pattern of software-triggered
interrupt.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Implement `riscv_plic_irq_set_pending()` to trigger a
software-generated interrupt.
The "4. Interrupt Pending Bits" of the riscv-plic specs
described the reading of the pending bits, but not the writing
Since not all PLIC implementations support software-generated
interrupt, the function is compiled only when
`CONFIG_PLIC_SUPPORTS_SOFT_INTERRUPT` is enabled on PLIC that
supports it, such as the Andes' NCEPLIC100.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add a new `andestech,nceplic100` binding that inherits from the
`sifive,plic-1.0.0` binding. This is so that the Kconfig
`DT_HAS_ANDESTECH_NCEPLIC100_ENABLED` would be generated during
build.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Gdb is typically able to reconstruct the first two frames of the
failing stack using the "pc" and "lr" registers. After that, (if
the frame pointer is omitted) it appears to need the stack pointer
(sp register) to point to the top of the stack before a fatal
error occurred.
The ARM Cortex-M processors push registers r0-r3, r12, LR,
{possibly FPU registers}, PC, SPSR onto the stack before entering the
exception handler. We adjust the stack pointer back to the point
before these registers were pushed for preservation in the dump.
During k_oops/k_panic, the sp wasn't stored in the core dump at all.
Apply similar logic to store it when failures occur in that path.
Signed-off-by: Mark Holden <mholden@meta.com>
The function jwt_payload_len doesn't return payload length but returns
used data in builder->buf
If jwt_payload_len is called after jwt_init_builder, header length will
be returned
If jwt_payload_len is called after jwt_add_payload, header+payload
length will be returned
If jwt_payload_len is called after jwt_sign, header+payload+sign length
will be returned
So, this commit removes the function and uses strlen instead
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
Update JWT subsystem documentation concerning the changes related
to:
- default library used
- new Kconfigs added
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- Some files (PEM/DER files, jwt-test-cert.c, user-tls-conf.h)
were removed because they are not used or no longer necessary.
Private keys used in the test are now in the jwt-test-private.c
file as arrays.
- testcase.yaml has been improved in order to test all possible
use cases: ECDSA with TC, ECDSA with PSA, RSA;
- unnecessary Kconfigs were removed from prj.conf.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit:
- creates 2 new files, jwt_ecdsa.c and jwt_rsa.c, to hold the
implementations of the corresponding ECDSA/RSA signature
algorithms;
- RSA signature is stil done through Mbed TLS's PK module which
can optionally make use of PSA (if enabled);
- ECDSA signature will instead use PSA, if possible, or TinyCrypt
as fallback.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Sometimes there's an unusually large cycles for tests that are
known to complete with just a few cycles. Upon some testing,
I found that it was because the overhead cycles was larger
than the cycles taken by tests, causing the cycles to
underflow.
To workaround that, make sure that the overhead measurement
thread runs uninterrupted, repeat the measurement for a few
times, and take the minimum value.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix of the subnet bridging table function to only
compact the table if elements has been removed, and
fixing the compact function to compact the table if
several elemnts has been removed at the same time.
Fixes zephyrproject-rtos#78794
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
