Change log level to fixed value coherent with macros used in the
test (LOG_INF). Use context struct to better organize global
variables and improve code readability.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a flash copy command, capable of copying a region in one
flash device to a region on the same or another flash device. The
destination is erased prior to copying.
This is useful for evaluating mcuboot on devices with little
on-chip resources, or devices that are incapable of running more
elaborate image management services (e.g. via bluetooth or
networking).
Additionally, it's useful for evaluating mcuboot on devices with
one or more images stored on external spi flash.
The command syntax is
flash copy <src_dev> <dst_dev> <src_offs> <dest_offs> <size>
E.g.
flash copy flash@0 flash-controller@abcd1234 0x1234 0x5678 21012
Copied 21012 bytes from flash@0:1234 to \
flash-controller@abcd1234:5678
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
test_flash_erase() requires that the expected[] array contains
pseudo-random data. However, the expected[] array would only
be initialized once before all tests are run using the setup
callback.
Instead, use the before() callback to randomize data before
each test in the suite, since there is otherwise no guarantee
that test_flash_erase() will be run directly after the
expected[] array has been randomized.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Provide a generic flash_copy() algorithm that is capable of
copying from one flash device to another or within different
regions of the same flash device.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Some counter drivers do not support alarms, so I added testcase which
starts the counter, checks if the value is in range after certain time and
stops the counter, to check if the counter is running correctly.
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
Co-authored-by: Michal Smola <michal.smola@nxp.com>
Adding the macros `RA_CGC_CLK_SRC` and `RA_CGC_CLK_DIV` that derive
the BSP clock settings from the DeviceTree node settings.
I also define some aliases to fill in the gaps with the BSP
naming conventions.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Move the process of replacing numerical values with macros to
the header, and set the division ratio in a numeric without
using macros in the device tree.
Change `clk-div` defined in `renesas,ra-cgc-pclk.yaml` to `div`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
DeviceTree typically references the clock source using the `clocks`
property defined in `base.yaml`, so we'll change it to this.
Also delete the custom clock source definitions in
`renesas,ra-cgc-pclk-block.yaml`, `renesas,ra-cgc-pclk.yaml`, and
`renesas,ra-cgc-pll.yaml`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Changes the path name of a DTS node so that it can be used
as the stem of a BSP macro.
All nodes to be changed are referenced via labels,
so only the name is changed.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Like some other string properties, I will add a derived form
to FULL_NAME to make it easier to reference from macros.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Extend the `coap_transmission_parameters` struct with the field
`ack_random_percent`. This was the last remaining CoAP transmission
parameter that was not configurable at runtime.
Signed-off-by: Adrian Friedli <adrian.friedli@husqvarnagroup.com>
The ztest.c calls atoi, which is provided by the C standard library.
Remove the conditional inclusion of the C standard library with the
definition of CONFIG_ZTEST_SHUFFLE.
Signed-off-by: Firas Sammoura <fsammoura@google.com>
dcache-alignement needs to be defined for ipc to have
consistent memory organization on both endpoints, when
shared memory is cacheable. nrf54h20 and nrf9280 are
using cacheable shared memory.
This is applied for ipc with icmsg backend.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
Verbatim from USB 2.0 specification:
The Remote Wakeup field indicates whether the device is currently enabled
to request remote wakeup. The default mode for devices that support
remote wakeup is disabled. If D1 is reset to zero, the ability of the
device to signal remote wakeup is disabled. If D1 is set to one,
the ability of the device to signal remote wakeup is enabled.
The Remote Wakeup field can be modified by the SetFeature() and
ClearFeature() requests using the DEVICE_REMOTE_WAKEUP feature selector.
This field is reset to zero when the device is reset.
Signed-off-by: Benedek Kupper <kupper.benedek@gmail.com>
When building with `MBEDTLS_PSA_CRYPTO_C` enabled, compile in the
PAKE (Password-authenticated key exchange) implementation.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Disable CDC ACM logging in configuraton overlay used in test case
bluetooth.shell.cdc_acm.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to preven recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Implements a set of tests designed to show how the performance of the
three scheduler queue implementations (DUMB, SCALABLE and MULTIQ)
varies with respect to the number of threads in the ready queue.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Implements a set of tests designed to show how the performance of the two
wait queue implementations (DUMB and SCALABLE) change as the number of
threads in the wait queue varies.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
To reduce lint warnings during code review, it is best
to keep clang-format happy
This commit makes a lint pass to this driver
Signed-off-by: Rafael Laya <rafael_laya97@hotmail.com>
Adds the right clock settings for Fast Plus Mode
in the i2c Designware driver which the original author
left as a TODO. Similarly, I lack the hardware to test
high-speed mode, and so that mode remains not well
supported.
Signed-off-by: Rafael Laya <rafael_laya97@hotmail.com>
Commit b73c5578e3 ("soc: ti: move init code from SYS_INIT to hooks")
changed SYS_INIT to init hooks. For AM6x M4 target soc_prep_hook()
was added by mistake instead of soc_early_init_hook(), the platform needs
RAT translation initialized before any other operation and the platform
failed to boot with this change, fix this by replacing with
soc_early_init_hook()
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Having the lowest possible interrupt priority is causing the
tests\arch\arm\arm_irq_zero_latency_levels test to fail.
This test reserves 2 priority levels for the low latency interrupts.
Since CYW20829 supports 3 interrupt bits, 6 becomes an invalid
value when 2 levels are reserved for the low latency interrupts.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Follow-up: #78320
Create linker_libraries.cmake for the Cadence Xtensa xt-ld linker to
ensure correct linking of runtime and C libraries as well as correct
link order.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Updating PhyBOARD Polis docs after enabling ECSPI
and CAN support on that board.
Add additional information what to do if
using Linux and Zephyr simultaneously.
Signed-off-by: Peter Fecher <p.fecher@phytec.de>
Configures ECSPI devices in devicetree including connected
mcp2518 (CAN FD).
Configures pinctrl for board.
Enables spi support in board files.
Signed-off-by: Peter Fecher <p.fecher@phytec.de>
Some imx8 socs have cpu cluster entries for cores that
are not currently supported. Remove them.
Fixes#79027.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
