This commit adds support for generating an interactive catalog of all
the supported boards that can be included in the documentation using
the `.. zephyr:board-catalog::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add some controls:
- hue
- saturation
- brightness
- contrast
- gain
- hflip
- vflip
- power line frequency filter
- pixel rate (read-only) which is needed for changing frame rate
Signed-off-by: Farah Fliss <farah.fliss@nxp.com>
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add support for 4 test pattern modes:
- Color bar
- Color bar rolling
- Square
- Square rolling
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add some minor fixes and optimizations:
- Fix coding style
- Rename some variables
- Use the array variable size directly instead of defining a macro
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
Color bar is one type of test patterns. Rename it to
VIDEO_CID_CAMERA_TEST_PATTERN to be more generic.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add some control IDs:
- VIDEO_CID_CAMERA_HUE
- VIDEO_CID_POWER_LINE_FREQUENCY
- VIDEO_CID_PIXEL_RATE which is needed for changing frame rate
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
ZBus currently does not have a `HEAP_MEM_POOL_ADD_SIZE_ZBUS` when using
message subscribers or runtime observers, forcing the developer to set that
manually. Adding the configuration option to zbus would improve its
usability and make zbus easier to use. With this feature, zbus aligns with
the other Zephyr subsystems' heap memory allocation approach.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Make the blinking and fading parameters adjustable so that samples
can be run on devices that support only short periods.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
If the `divider-int-0` or variations of these for each channel properties
are not specified, or if these is 0,
the driver dynamically configures the division ratio by specified cycles.
The driver will operate at the specified division ratio if a non-zero
value is specified for `divider-int-0`.
This is unchanged from previous behavior.
Please specify ``divider-int-0`` explicitly to make the same behavior as
before.
In addition, the default device tree properties related to the division
ratio have been removed.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Now that hostap is used k_heap, it needs to reserve the kernel heap not
libc heap.
Fixes#79477.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This was we can modify it in a single place that works both for native
and OS specific code.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Title of the document was wrong, image info was missing, and a bunch of
other formatting issues.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- update the EVK's board.cmake, making linkserver the default runner
- update the board's document file
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Fix M1 errors seen with HDR-DDR writes, M1 errors we seen between CRC
and HDR exit sequence. The fix was to set Bit-8 of HDR-DDR CRC TXFIFO
word.
Signed-off-by: Naveen Gangadharan <naveeng1001@meta.com>
Add scan cb to scan delegator so that Application
can be notified when assistant starts or stops
scanning.
Also state information of Broadcast Assistant
is removed as info is not used.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
The recently introduced board.full_name property can now be used as part
of the format string in the `west boards -f ...` command.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
NXP mcxc series has boot source configured to ROM. ROM bootloader
waits 5 sec for active peripheral detection timeout before jumping
to application in flash which makes booting very slow.
Change configuration to boot from flash and allow boot source
selection by external pin.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
msghdr_non_empty_iov_count() is used by TLS sockets too therefore should
be available regardless of native IP sockets being enabled or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When CONFIG_LOG_OUTPUT is set, it indicates that logging strings
are formatted by the application (using log_output module). It is
not needed when backend works in the dictionary mode. So far
LOG_OUTPUT was set also when dictionary mode was used and that
prevented removing of the logging strings from binary which is
an important feature of the dictionary logging.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Move log_output_flush and log_output_write (renamed internal
buffer_write() function) to the header as inline functions.
Those function are used by log_output_dict.c and there are cases
when log_output.c is not compiled in.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
IPv6 based interface lookups doesn't require native IP stack support,
hence reflect that in the API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some tests are failing on nrf54h20 cpurad in non-obvious manner
because of this memory region being too small.
Instead of adding overlays to each individual application,
make this region larger at expense of cpuapp equivalent.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
All Intel Audio DSP platforms have non-coherent cache between
CPUs. So the zbus_channel struct data goes out-of-sync between
CPUs with multiple producer and consumer threads running
concurrently on multiple CPUs, resulting in bad pointer being
used, e.g. passed to memcpy(). So exclude these platforms from
running in twister as they are certain to fail.
Fixes: #79368
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Service for powering peripherals that use GPIO pins
in the global power domains:
- Active Fast
- Active Slow
- Main Slow
Signed-off-by: Rafal Dyla <rafal.dyla@nordicsemi.no>
Add netif:eth to twister yaml for frdm_rw612
Exclude from wifi test because of binary blob requirement
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
IAP is a reference to the method of software interaction with the flash
used in the current driver implementing support for this flash. The
DT compatible should not be named like this.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix incorrect elapsed events value when event prepare are
aborted in the pipeline. This caused premature supervision
timeouts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_SCAN_AUX_SYNC_RESERVE_MIN such that event is not
aborted when near supervision timeout conditions.
Relates to commit ddf04997a5 ("Bluetooth: Controller: Add
abort fairness in overlapping Periodic Sync").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_PERIPHERAL_ISO_RESERVE_MAX Kconfig option
so that disabling this option will use minimum time
reservation and exercise the peripheral ISO connection event
continuation using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_PERIPHERAL_RESERVE_MAX Kconfig option so
that disabling this option will use minimum time reservation
and exercise the peripheral connection event continuation
using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This inverts x and y axes as reported by stmpe811 driver for stm32f429i.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This adds zephyr,touch property to boards with touch controllers, analogous
to `zephyr,display`.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The sample is supposed to help examine the issues with touchscreen.
It draws a plus in last touched position.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
