For the simple events, do not check whether the device driver and stack
are marked as initialized. USB device notification will reschedule
delivery if the stack is not yet marked initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Since no threads are waiting for the FIFO and we do not need any k_fifo
features, we can just use slist.
Some notifications (caused by interrupts), especially "VBUS ready", can
be triggered very quickly right after UDC initialization if the USB
controller is already connected. Depending on the global thread
configuration, messsage publishing work can be executed before the
context is marked as initialized. Use delayed work to reschedule
publishing when the context is not initialized.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Support regulator output different voltage as reference to LPADC
the regulator output voltage can be set through property
zephyr,vref-mv
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Remove nxp_ground_select property.
Delete the use of NXP vref peripheral CSR register REFL_GRL_SEL bit.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
STM32 devices with an SDMMC driver will still need to be tested, but
they do not use the SDHC framework for their disk driver. Therefore, add
a special testcase to validate disk access support for devices with the
STM32 specific SDMMC DT compatible enabled.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SDHC twister tag indicates that the board supports an SD host controller
driver. Since the ST SDMMC support is provided directly via a disk
driver, SDHC tests are not supported on ST boards. Drop this tag in
order to avoid twister failures running the SDHC tests on these
platforms.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Unit tests currently are not runnable on Windows systems, failing
on two testfiles: test_jobserver.py and test_testsuite.py.
This commit removes code dependency on Windows-unavailable
elements on Windows systems via skipping the offending tests.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Fixes remote address for ping before upload. This caused the ping in zperf
upload to timeout as shown in the following output:
```
uart:~$ zperf udp upload 2001:db8::2 5001 10 50 1M
Remote port is 5001
Connecting to 2001:db8::2
Duration: 10.00 s
Packet size: 50 bytes
Rate: 1000 kbps
Starting...
ping 2001:db8::2 timeout
Rate: 1.00 Mbps
Packet duration 390 us
```
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/68674
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Add nsim cmake support file as parts of Synopsys platform
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Add mdb & nsim west runners files as parts of Synopsys
platform
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Remove IRISZZW from collaborators as he no longer works for
Synopsys
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Add test scenario that verifies correct error code
returned by wdt_setup() when called just after wdt_disable().
Scenario:
- configure WDT timeout;
- start WDT by calling wdt_setup();
- remove all WDT timeouts by calling wdt_disable();
- confirm wdt_setup() returns error code due to lack
of configured WDT timeouts.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
According to API description, wdt_disable() shall
automatically uninstall all timeouts.
https://docs.zephyrproject.org/latest/hardware/peripherals/watchdog.html
Implement missing wdt_disable() functionality:
- disable WDT RR channels;
- remove callback from timeout channels;
- set data->m_allocated_channels to zero.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Expands driver to cover nRF54L15 features like AIN as GPIO configuration,
new reference voltage, different set of supported gain options.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
PHYTEC has multiple offices in different locations like
the US, France, India and China. The headquarter is located in
Germany. Since now 50% of the PHYTEC boards are from the US
office, we should drop 'Messtechnik GmbH', which is the offical
title of the German office, and keep the name more general.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
This commit should add all the functionality needed for the entropy
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
The val2 calculation was done using (1000000 / 40960) as
multiplying factor, which was sometimes leading to a
int32 overflow. So, let's use the equivalent (but smaller)
(3125 / 128).
Fix#46615
Signed-off-by: Armando Visconti <armando.visconti@st.com>
If no " character is found in buffer by esp_pull_quoted() it
returns -EAGAIN which causes a loop that never ends. This is because
the buffer dont get filled up with new data so no " chrachter will be
found. This commit changes esp_pull_quoted() to only return -EAGAIN,
so the buffer can get filled with new data and thus the loop can come
to an end.
Signed-off-by: John Johnson <john.filip.johnson@gmail.com>
Allow Block-Wise writes to resources that have enough buffer for
the whole content. Calculate the offset before calling the
content specific write handlers when callback is not set.
Previously only resources with post-write callback were able to
assemble the content.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When Block-Wise transfer restarts, the post-write callback should
receive some indication that the block is actually a beginning of new,
instead of part of previous transfer.
Fixes#71351
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Both nrf54l15pdk/cpuflpr and nrf54l15pdk/cpuflpr_xip have
watchdog on the list of supported periperals.
As a result, Twister tries to build samples/drivers/watchdog
for these two targets.
Since overlays are missing, build is failing.
Add missing overlay files.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
It is enough to test watchdog driver on the application core.
Otherwise, at least three samples/tests fail due to missing
overlay file for nrf54h20dk/nrf54h20/cpurad.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
The callback is only ever called when we received a
notification from the BASS server that the receive state is
removed, which cannot contain an error code.
Thus it does not make sense for the callback to have an
error code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Store Twister command line options in twister.json report as
`environment.options` object. It allows to keep the actual
execution context for test results analysis and history comparison.
A new command line option `--report-all-options` enables to report all
command line options applied, including these set as default values.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
in many platforms, before the debuger flash, the former testsuite
many already executed, so we will see some old testsuite name.
and we should not compare them directly, instead if we compare in
reversed order them we can avoid such mis-judge.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
