Convert the ST7735R display to use the MIPI DBI API. Boards and overlays
using this display are also updated.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Require that SPI config within the MIPI DBI API use 9 bit SPI mode, as 3
wire spi requires the command/data bit be packed into the start of the
SPI packet.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The RTXXX and RW61X DT are using syscon compatible
depsite not having a syscon. This is a technical debt
to remain aware of. The reason they use these compatibles
is to use the syscon driver which is a shim to an SDK API
that is somewhat similar to syscon.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Include reset device binding in some of the NXP LPC
IP bindings to be able to add the resets property.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add _OR versions of all the reset_dt_spec macros.
Also bump the API version to 0.2.0 (unstable) since
there are multiple implementations of this API.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add binding representing the peripheral reset controller
of the NXP LPC SYSCON heritage hardware including SYSCON
itself and the newer RSTCTL.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Clarify that there needs to be a cell named "id" in order
to be usable by the reset controller macros.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
If time aware system has more than 1 gptp port, because there is only
one boolean to handle callback registering, a race condition can occur
for instance in case 2 master ports are waiting for a timestamp following
sending of sync message. More in details, callback may be unregistered
by port 1 while port 2 is waiting for timestamp event.
The issue is solved by declaring as much as boolean and struct
net_if_timestamp_cb as the number of declared ports
(=CONFIG_NET_GPTP_NUM_PORTS).
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Setting a ration of 0 breaks the computation of scaled_rate_offset
in gptp_md_follow_up_prepare().
According to IEEE802.1AS 10.2.2.3.9, when sent by clock master
entity, rate_ratio shall be equal to gmRateRatio. But since
in gptp_md_follow_up_prepare(), in case we are the grand master
clock, we take the assumption that clock source is the local clock,
we may set this ratio to 1.0.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Without this patch, in case time aware system is grand master capable
but is not the grand master clock and behave as a bridge so that it
shall ONLY relay SYNC and FUP messages from slave port to master port(s),
SYNC and FUP are mistakenly generated by ClockMasterSyncSend state
machine.
This patch only call ClockMasterSyncSend state machine in case a Grand
Master clock is present and is this time aware system.
This check is not described by IEEE802.1AS. Instead, according to
10.2.9.3, the SiteSyncSync state machine shall not take into account
information from ClockMasterSyncSend in case this time aware system is
not grand-master capable. Current implementation of ClockMasterSyncSend
state machine sends sync indication to the PortSync entities, instead of
sending it to the SiteSyncSync entity. And the SiteSyncSync state machine
does not make any check.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Commit 413eceeddb ("net: gptp: fix follow_up message correction_field")
breaks computation of follow up correction field in case time aware system
is not the grand master clock but behave as a transparent clock which relay
sync and follow-up messages from one slave port to one or several master
port(s). In this case, according to IEEE802.AS 11.1.3 and 11.2.14.2.3,
md sync send state machine shall compute the sum of link propagation delay
and residence time, expressed in grand master time base. Then this quantity
shall be added to last received fup correction field to build value of
correction field. This patch checks whether time aware system is the grand
master clock or not, and computes value correction field accordingly.
Signed-off-by: Jean-Nicolas Graux <jean-nicolas.graux@st.com>
Add header file for flash configuration blocks
which is an image header consumed by the RW bootrom.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
First version of RTIO-compatible nrfx_twi driver.
Test Setup:
- Board: nrf52840dk
- Test: `tests/drivers/i2c/i2c_ram`
- Additional Kconfig: `CONFIG_I2C_RTIO=y`
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Updating net-tools to latest version in order to get the
missing dnsmasq.conf file to Docker.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Do not end except block with a useless return, use a pass instead. This
fixes pylint R1711: "Useless return at end of function or method
(useless-return)".
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add "west build" argument for specifying shields. This saves users from
having to do "west build ... -- -DSHIELD=...", making shields a much better
integrated feature.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add example snippet argument to usage output of the "west build" command
and use the singular "SNIPPET" in the generated help text.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove `bt_l2cap_le_endpoint.init_credits` that has zero uses and is
just taking up RAM for no reason.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add new Microchip MEC chips using the new MEC5 HAL and
add a HAL version of a legacy chip named MECH172x.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add support for the goworld 16880 display module. As this display module
only features an FFC cable, it is added as a board overlay for the RW612
BGA. This module uses an ST7796S display controller as well as an FT7401
touch controller (which is managed by the FT5336 input driver)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This is part one of several changes to add more methods to the bitarray api
so that it can be used for broader usecases, specifically LoRaWAN forward
error correction.
Signed-off-by: Lucas Romero <luqasn@gmail.com>
This is part one of several changes to add more methods to the bitarray api
so that it can be used for broader usecases, specifically LoRaWAN forward
error correction.
Signed-off-by: Lucas Romero <luqasn@gmail.com>
This is part one of several changes to add more methods to the bitarray api
so that it can be used for broader usecases, specifically LoRaWAN forward
error correction.
Signed-off-by: Lucas Romero <luqasn@gmail.com>
Reschedule from '6:25 and 18:25, Monday-Friday'
to 'everyday at the same time'.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Added ioannis-karachalios as maintainer in
the hal_renesas
Moved andrzej-kaczmarek to collaborators and added
blauret as collaborator too.
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
Add support for Nuvoton numaker board numaker_m2l31ki.
m2l31x has 4 MPU regions and can't afford one more region
for TEST_USERSPACE, so set CONFIG_TEST_USERSPACE=n.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Allow to provide from CLI, threshold value for number of test case roots
selected for execution base on changed files.
When such threshold will be exceeded, full scope will be executed.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
