The value of in6addr_mcast is overwritten in iface_setup() before being
assigned to the interface. Remove the useless initial value since it is
never used, in order to avoid misleading information.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Two different IPv6 addresses can have the same solicited node multicast
address, for example when they are derived from the same EUI-64
interface identifier during the auto-configuration process. For example,
an interface with a physical address 70:07:12:34:56:78 can have the
following:
- link-local address FE80::7207:12FF:FE34:5678
- global unicast address 2001🔢::7207:12FF:FE34:5678
Both addresses will have the same solicited-node multicast address
FF02::1:FF34:5678. Currently, if one removes the global unicast address,
the solicited-node multicast address is also removed, leaving the
link-local address out of the solicited-node multicast group. This
breaks some protocols like Neighbour Discovery.
Count how many times the solicited-node multicast address is used and
remove it only if it is not shared by any other unicast address.
Fixes#59683
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
First search for a match, then perform the removal outside the loop.
There is no functional change but this prepares for some future changes.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Move the creation of the multicast solicited node address outside the
loop. There is no functional change but it prepares for some future
changes.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
After exiting D3 state if IMR context save is enabled, IDC interrupt
must be re-enabled again for all cores.
Signed-off-by: Serhiy Katsyuba <serhiy.katsyuba@intel.com>
PTS l2cap tests need BT_BUF_ACL_RX_SIZE to be 100.
Signed-off-by: Lang Xie <Lang.Xie@nordicsemi.no>
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Instead of setting the default_stream when we initiate
the configure operatio, we set it when it has succeded.
In case that the codec configure fails, the stream should
not really be considered configured as the default.
This also ensures that the default_stream is set when
using the CAP shell commands.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently, it is not possible to use hawkbit with code that requires
POSIX_API to be set due to the dependency on NET_SOCKETS_POSIX_NAMES.
Since a lot of other code has already been moved to `zsock_`, this
commit does the same for hawkbit.
Co-authored-by: rojedag <r.ojeda@vogl-electronic.com>
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
Lwm2m firmware object have defined a write of zero length
string as a cancel operation.
So allow lwm2m_set_opaque(path, NULL, 0);
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Drop the collabors entries that were already in maintainers (no need for
the dup), change the board expression so that it matches both ITE boards
currently in the repo.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It may happen that CIS is scheduled in the future and did not started
yet once accepted. When ASE goes to Releasing state in such case
the ISO has to be disconnected, because otherwise ASE will stuck in
releasing state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Since clear_lc3_sine_data references audio_send_work, it must
be declared before the clear_lc3_sine_data function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Convert the XPT2046 driver to the input subsystem, change the api,
remove the callback and enable logic.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The bt_bap_scan_delegator_find_state did not properly return the
correct receive state due to confusing return value of the
iterator function.
Modify it to use a simple bool.
This fixes all issues with "Failed to find receive state for sink"
when using the Broadcast Sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the CSIP Set Coordinator verify_members we verify that
all members have unique ranks.
This was done as part of the initial loop, but it is
more efficient to do this as a separate loop as we can reduce
the number of items to compare, as well as guarding this properly
by !zero_rank.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some values have been reduced and some have been increased to
better follow the audio configurations in BAP and support
more incoming data.
Also removes HRS as that is not used by LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes 2 issues:
1) The broadcast code would only ever get the first value, even if
the command specified up to 16 values.
2) The broadcast code is not just hex values, so hex2bin does not make
sense, and strlen + memcpy is much simpler.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the broadcast assistant have found the expected broadcast
source it should stop scanning.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The shell_print was meant to print the address of the broadcast
source along with the broadcast_id.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bad code field should only be printed when there is an actual
bad code, otherwise it just prints all-0s.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move BT_CTLR_SCAN_SYNC_ISO_SET to Kconfig from Kconfig.ll_sw_split
This means it can be used by other controllers and alligns with location
of other iso configs - e.g. BT_CTLR_SYNC_ISO_STREAM_COUNT
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Content-format tests do not require network or
Newlibc, so by removing these filters.
Defined a native_posix as the only integration platform
because all simulated arm-zephyr-eabi platforms are
filtered out by Twister.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
As the lwm2m_reset_message() is stubbed, it does not remove
a message from rettry queue. Therefore depending on the
simulation speed, retries can happen one or many times.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
