Similar to ISO connections, ACL connections are not serviced as fast as
possible. Change this, and try to send as much as we have resources for.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
ISO connections that were in the TX queue were not getting serviced in
time. This happens because `iso_data_pull()` returns `NULL` when that
particular connection (`conn`) is done sending.
But it doesn't trigger the TX processor again to process other channels in
the queue. This patch fixes that by calling `bt_tx_irq_raise()`.
We can't do this from `conn.c` as we don't know if the `NULL` returned is
because the current channel is out of data or because it has data but it
can't send it (e.g. the current buf is being "viewed" already).
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/74321
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This makes it more clear what is happening when the host cancels
connection creation where the controller raises
the connection complete event with status set to
"UNKNOWN CONNECTION IDENTIFIER (0x02)".
This is especially useful for developers not familiar with this
detail in the spec.
See also: Core_v5.4, Vol 4, Part E, Section 7.8.13,
LE Create Connection Cancel command.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add google_dragonclaw board definition and allow running the
drivers.counter.basic_api.stm32_subsec test on the board.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add documentation about USB message notifications. Use literalinclude to
pull code snippets from the samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add doxygen group with MSC device API and document macro to create
mapping between disk access and MSC LUN.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Make example code most left-aligned.
Also use :samp: to format identification strings in the table.
Followup on commit 8739efe0fc
("doc: usb: add initial USB device configuraiton howto").
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clock NXP_S32_FTMx_CLK reference the output of PCC_FTMx clocks, but
FTM has an internal clock mux to select the clock source of the
counter, which for ucans32k1sic board is set to system clock. Fix the
clock nodes to use the correct clock name. So far this was working
because both NXP_S32_FTMx_CLK and NXP_S32_CORE_CLK are configured to
the same frequency.
Fixes#74348
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
Generally, we should avoid using reserved names in global
contexts.
subsys/net/lib/ptp/clock.c:58:25: \
error: 'clock' redeclared as different kind of symbol
58 | static struct ptp_clock clock = { 0 };
/opt/toolchains/zephyr-sdk-0.16.8/arm-zephyr-eabi/picolibc/ \
include/time.h💯12: \
note: previous declaration of 'clock' with type 'clock_t(void)' \
{aka 'long unsigned int(void)'}
100 | clock_t clock (void);
subsys/net/lib/ptp/clock.c:58:25: \
error: 'clock' defined but not used [-Werror=unused-variable]
58 | static struct ptp_clock clock = { 0 };
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The shell tries to decode all channel types and sequential channel
indexes. Unfortunately when swapping to channel specs we forgot to reset
the channel index for the next channel type to look at.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Noticing many PRs that wait too long in the queue although once of the
maintainers approved with asignees set to other maintainers.
This changes the current behavior of picking the first maintainer in the
list and assigning to them only, instead we assign to all maintainers of
the main area being changed.
Who ends up driving the PR to a mergeable state is then to the
maintainers and they can unassign/assign based on availability.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Created tracing APIs to trace the enter and (exit + result) of
SYS_INIT and DEVICE_DT_DEFINE (and friends).
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Removed PM device runtime support from drivers in PD_SYS domain.
Update the rest device drivers to call pm_device_runtime_get/put()
functions when CONFIG_PM_DEVICE_RUNTIME is enabled.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
Add helper function which calculates the required calibration to
1 Hertz from the actual frequency of an RTC. This helper is both
functional and adds to the documentation of the RTC calibration
API.
The rtc.h header now includes zephyr/kernel.h instead of
zephyr/types.h as __ASSERT_NO_MSG is now referenced in the header.
The commit additionally extends the rtc_api_helpers test suite
with a test to validate the conversion function itself.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
If filesystem relies on zfp flags being set after open, this can lead to
inconsistency with the current implementation of FS_O_TRUNC.
Move the assignment of zfp->flags before any other call to fs api to avoid
such issues.
Signed-off-by: Pierrick Guillaume <pierguill@gmail.com>
Fix a few issues with the probes documentation for NXP boards:
- fix references to debug probe type in probes page introduction
- add an explicit "Install the host tools" step for the LPC-Link and
MCU-Link based debug probe update steps.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT1050 EVK rev A boards (with rev A silicon) are not well supported by
Zephyr. Update the documentation page to remove the reference to A0
silicon, as the page describes details specific to the RT1050 EVKB with
rev B silicon.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Update iMXRT10xx board debug sections to use common snippets, which
describe debug configuration settings shared between all these boards.
This should help avoid documentation falling out of date in the future.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The following heap-related Kconfigs shared by the picolibc &
minimal libc have been deprecated for more than 2 releases,
remove them and update the Kconfigs accordingly:
- `CONFIG_MINIMAL_LIBC_MALLOC_ARENA_SIZE`
- `CONFIG_MINIMAL_LIBC_REALLOCARRAY`
Cleanup the handling to support the deprecated malloc arena
size configuration values.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The following Kconfigs have been deprecated for more than 2
releases, remove them:
- `CONFIG_SUPPORT_MINIMAL_LIBC`
- `CONFIG_MINIMAL_LIBC_MALLOC`
- `CONFIG_MINIMAL_LIBC_CALLOC`
- `CONFIG_MINIMAL_LIBC_REALLOCARRAY`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The following Kconfigs have been deprecated for more than 2
releases, remove them:
- `IEEE802154_CC13XX_CC26XX_SUB_GHZ_RADIO_TX_RETRIES`
- `CONFIG_IEEE802154_2015`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These Kconfigs should have been deprecated for more than 2
releases, remove them:
- `CONFIG_CPP_MAIN`
- `CONFIG_CPLUSPLUS`
- `CONFIG_LIB_CPLUSPLUS`
- `CONFIG_EXCEPTIONS`
- `CONFIG_RTTI`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_CONFIG_SETTINGS_FS` has been deprecated for
more than 2 releases, remove it and its associated source
code.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Selection of these GIC Kconfigs have been deprecated
for more than 2 releases, users should use the devicetree
method instead, update the Kconfigs.
The SOCs below have been updated to not select `GIC_V3`, since
their devicetree already have the required compatible:
- fvp_aemv8r
- rzt2m
- rk3658
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The following Kconfigs:
- `CONFIG_ETH_STM32_HAL_RANDOM_MAC`
- `CONFIG_ETH_STM32_HAL_USER_STATIC_MAC`
- `CONFIG_ETH_STM32_HAL_MAC3`
- `CONFIG_ETH_STM32_HAL_MAC4`
- `CONFIG_ETH_STM32_HAL_MAC5`
have been deprecated for more than 2 releases, user should
have switched to the devicetree method now, remove them.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
