`CONFIG_LOG_DOMAIN_ID` has been deprecated for years and
shouldn't be used according to its documentation, remove it.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`CONFIG_BT_DEBUG_LOG` has been deprecated for more than 2
releases, replace it with `CONFIG_BT` + `CONFIG_LOG`:
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These clock selection Kconfigs should have been deprecated for
more than 2 releases, remove them:
- `CONFIG_COUNTER_RTC_STM32_CLOCK_SRC`
- `CONFIG_COUNTER_RTC_STM32_CLOCK_LSI`
- `CONFIG_COUNTER_RTC_STM32_CLOCK_LSE`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`lwm2m_engine_get_resource()` has been mark for deprecation for
more than 2 releases, but we are still using it in tree now,
because the `__deprecated` marker was probably forgotten in the
initial deprecation commit.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These functions have been deprecated for more than 2 releases,
remove them:
- zephyr_smp_rx_req
- zephyr_smp_alloc_rsp
- zephyr_smp_free_buf
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
These token enums been deprecated for more than 2 releases,
remove them:
- JSON_TOK_LIST_START
- JSON_TOK_LIST_END
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Update airoc_wifi_host_buffer_get function to set final
buff size based on input “size” param.
Update airoc_mgmt_send to use airoc_wifi_host_buffer_get
instead net_buf_alloc_len.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Since b53a792ff0 Zephyr has the ability to define tristate Kconfig
options. When a tristate option FOO is selected as a "module", this
results in autoconf.h defining CONFIG_FOO_MODULE, not CONFIG_FOO.
This patch allows the check_compliance script to also accept references
to a Kconfig symbol ending in _MODULE if the prefix is defined.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Before merging the BIS specific codec configuration with the
subgroup codec configuration, we should ensure that the
BIS data is not empty, as that would trigger an error from
bt_audio_data_parse.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Execute 'zephyr.exe' in application build directory as 'current working
directory' (cwd). This makes sure that native_sim specific drivers (like
flash simulator with file backend in 'flash.bin') are using unique context
for external resources with relative paths.
This fixes executing native_sim tests in twister with flash simulator.
Previously a shared 'flash.bin' was used for all executed 'zephyr.exe'
processes in twister. After this patch a unique 'flash.bin' file is used
for each tested sample, since those 'flash.bin' is placed in application
build directory instead of twister root directory.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The `orientation-flipped` dt property was dropped from the devicetree
binding for the ssd16xx display driver. Add a note to the migration
guide directing users to now set orientation at runtime.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fixed#74370, the issue is caused by the update to introduce MMIO
mapping, after MMIO mapping, should use data->base for device
base memory address.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Some stm32 series, do not have a LL_DBGMCU_SetTracePinAssignment
function to enable trace IO port, this is the case with the
stm32h7 serie.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
For station and internal AP coexist case, station connected to
external AP, ping from station to external AP cause cpu hang.
Internal AP dhcpv4 server register handler echo_reply_handler
on icmp handler by net_icmp_init_ctx for dhcp server snoop
feature. Ping also register handler handle_ipv4_echo_reply on
icmp handler for ping cmd. If no external station connect to
internal AP, input parameter ‘user_data’ of function
echo_reply_handler is NULL. When we trigger ping process,
icmp_call_handlers fetch all handlers from icmp handler
if receive any ICMP packet, so echo_reply_handler be called,
but input parameter is NULL, cause CPU hang.
Add input parameters check to fix this issue.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
hci_uart_async/debug.mixin.conf is used to enable RTT logging
for hci_uart_async sample. RTT can be used to avoid conflict
between different serial interfaces because the sample uses
UART as an interface for HCI communication.
RTT_CONSOLE option enabled in the debug.mixin.conf depends on
CONFIG_USE_SEGGER_RTT so enabling CONFIG_USE_SEGGER_RTT by
default makes it easier to build the project with RTT enabled
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
Add isolated pool (static and dynamic) to the sample illustrating how to
use that and performing some testing in different scenarios.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Currently, zbus uses a single global `net_buf`pool to publish messages to
msg_subscribers. It would be good to have a way to separate the pools for
channels related to critical parts of the systems to avoid publication
failure on these particular channels. These channels will not use the
global pool. They can set an isolated pool by calling the
`zbus_chan_set_msg_sub_pool.`
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
When CONFIG_X86_EXCEPTION_STACK_TRACE is enabled, also forcibly
enable CONFIG_THREAD_STACK_INFO. Without the thread stack info,
it is possible the stack unwinding would go out of the thread
stack and into unknown memory, resulting in hard fault.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The current atmel,sam-tc-qdec sensor implementation shared the timer
counter node. This create issues when users wants define both modes.
The current proposal changes the qdec dedinition to be a child of
tc and refactor all the chain of definitions.
Fixes#71312
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Replaced the software `reverse` function, used for bit reversal, with
the intrinsic `__RBIT` function.
This utilizes the hardware bit-reversal instruction for improved
efficiency.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Some extensions may be able to run faster if they can check if Doxygen
contents has changed from one build to the other
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The sysbuild part of sysbuild/application creates a sysbuild/application
folder under top-level build dir. However, having a sysbuild folder at
this level means that tab completion for sysbuild pre-fixed build
targets will stop after completing just `sysbuild` and then show several
subfolders, making it hard to see important build targets, such as:
`ninja sysbuild_menuconfig`.
As `sysbuild/application` is just a folder name, then move it to
`_sysbuild` instead to avoid impacting tab completion for ninja and
make.
Also strip the `application` part in the process, as the extra folder
doesn't provide any extra benefit, but is just one more level to enter
when browsing the build folder structure.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If not defined by caller, then set APPLICATION_BINARY_DIR to
CMAKE_CURRENT_BINARY_DIR. This is normally be done by
`find_package(Zephyr)`, but due to the indirection introduced with
fc1884ecf5 to allow applications to
provide their own sysbuild entry point, then the APPLICATION_BINARY_DIR
is unexpectedly set to the bin dir of the entry point.
Restore the old behavior so that APPLICATION_BINARY_DIR per default
again points to top-level sysbuild binary dir.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Implementation erroneously used a mask from the ROUTEPEN register
when writing the ROUTELOC register.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Series 2 uses DBUS for alternate function control, which directly uses
port and pin numbers for location selection. Configure pinout as part
of the I2C_SDA/I2C_SCL case, rather than the separate _LOC case,
as the port and pin are not available at this point.
Configure route register prior to enabling the route, to ensure that
the wrong pin is not temporarily claimed.
Fixes an issue where DBUS was always configured to port A and
pin given by the GECKO_LOC() macro, rather than the correct port/pin
pair.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
`west build` can be invoked without specifying the source directory when
being invoked from the source directory itself.
When using `west build` for incremental builds, then the build command
will examine the CMake cache to determine the application dir by using
the value of CMAKE_HOME_DIRECTORY.
With sysbuild, this leads to the wrong assumption that the sysbuild
itself is the application to build.
Instead, have west build look for APP_DIR which points to the correct
source dir when sysbuild is used. Use APPLICATION_SOURCE_DIR when
APP_DIR is not set, as this indicates a no-sysbuild build.
Keep CMAKE_HOME_DIRECTORY behavior as last fallback mechanism.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit addresses the issue related to the rtc.h API returning ENOSYS
for a driver not implementing alarm_set_callback when the ALARM
functionality is enabled but interrupts, and thus alarm callbacks, are not
supported by the current configuration.
The following drivers have been modified to return correct code:
- rtc_pcf8523
- rtc_pcf8563
- rtc_rv3028
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
Check for ENOTSUP on alarm callback test if ALARM functionality is
enabled but callbacks are not supported
Signed-off-by: Jakub Topic <jakub.topic@anitra.cz>
Printing event name during event processing caused unexpected delays on
slower platforms, making the tests fail. As according to the tests
author those prints were unintentional leftovers, just remove them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Stop Twister if there are too many backup copies of the output
directory already.
Before this fix, Twister silently kept artifacts from the last run,
unless `--clobber-output` was explicitly given.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Use CAN_CALC_TDCO() macro to set TDCO. There is a minor change how the
tdco is calculated. In the macro the SYNC segement is taken into
account while it wasn't used before.
Fixes#73821.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
