The ACPI shell command create way too much vertical empty space. Remove
the unnecesary newlines and use indentation to indicate grouping of
lines. At the same time, place case statments with variable declarations
behind {} since otherwise both the Zephyr compliance checker and some
other static analyzers get confused by the code in the branch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was never used for anything, since the ACPI API overwrites the
pointer when fetching a resource list.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
ACPI_STATUS variables should not store values of any other error domain
(like negative POSIX error codes used for Zephyr's ACPI API).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The acpi_get_irq_table() function takes a pointer to a table that can
come from anywhere, i.e. it doesn't have to be the acpi.pci_prt.table
that acpi.c uses. Because of this, the correct place to iterate and
process the acpi.pci_prt_table is in the function that actually passes
acpi.pci_prt_table to the acpi_get_irq_table() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The acpi_get_irq_routing_table() takes a pointer to an array of
ACPI_PCI_ROUTING_TABLE elements rather than a generic buffer pointer
(e.g. void *).
Because of the above, it makes sense to specify the array size as an
actual ARRAY_SIZE() value, since it makes no sense to accept buffers
which are not a multiple of sizeof(ACPI_PCI_ROUTING_TABLE) long.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use the appropriate ACPI_STATUS type for any status variable that stores
return values from ACPICA APIS.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the CONFIG_PCIE_PRT option is disabled it makes no sense to bloat the
ACPI build with PRT-related code or static tables. The diff looks a bit
larger since functions in acpi.c had to be shuffled around to be able to
be included in a single "#ifdef CONFIG_PCIE_PRT" block.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
ACPI currently uses implicit (auto) initialization, i.e. it doesn't need
any init level or priority.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The acpi_tables array is only needed for systems where dynamic memory
allocation is not available during the early ACPI init phase. In the
Zephyr case we can immediately start using k_malloc, so this is
unnecessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the server has synchronized to the PA and detected that the BIS is
encrypted, the server writes a value of 0x01 (Broadcast_Code
required) to the BIG_Encryption field of the Broadcast Receive State
characteristic to request a client to provide a Broadcast_Code.
In PTS BASS/SR/CP/BV-14-C test case the PTS (client) expects that the
new value of the Broadcast Receive State characteristicstate will be
notified, so the PTS could sent Set Broadcast_Code operation to the
server.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Disable the quadspi mpu region of the nucleo_f746zg
when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is support for AArch64 development board.
The board uses 4-core Cortex-A55, which are based on
the ARMv8.2 architecture.
In addition,we support smp support and
it can use 4-cores to run basic samples.
Signed-off-by: Charlie Xiong <1981639884@qq.com>
HCR_EL2 is configured to certain value by some
loaders such as Uboot on some arm64 boards(such as roc_rk3568_pc),
When HCR_EL2.TGE, HCR_EL2.AMO and HCR_EL2.IMO bits are
set to 1, some unpredictable behaviors may occur during
zephyr boot. So we clear these bits to avoid it.
Signed-off-by: Charlie Xiong <1981639884@qq.com>
The variants of this family have different sizes of eeprom. This moves
eeprom definition from common family definition to device specific.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Enable ticket spinlock on nsim SMP board as they are
naturally vulnerable to spinlock unfairness due to
SMP nSIM way of work.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add in DT the possibility to configure both INT1 and INT2
pin. The driver will then assign one of the two (either 1
or 2, according to what value drdy_pin is set) to a gpio
for receiving drdy interrupts.
The other pin may be used in the future to receive event
interrupts.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The HCI receive path has a delay between reading the header and payload
from the controller to give the controller time to setup the SPI
peripheral for the next transaction. Add the same delay on the transmit
path for the same reasons.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add log output when the HCI interface is forced to retransmit a packet
because the controller is not ready.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Commit c6e3bac4f changed the core clock frequency of LPC55XXX series.
That clock is used by the cortex-m systick timer, which is the
default timer used for system time in zephyr on this series.
The bug is that the config SYS_CLOCK_HW_CYCLES_PER_SEC default was not
updated on the affected platforms to account for this change, so system
time is currently recorded as 150% of reality. Fix this by changing the
kconfig to be set automatically at SOC level and remove board defaults.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The way that the QSPI peripheral is activated has been changed in
nrfx 3.2.0. Now the peripheral is not activated during the driver
initialization. Instead, the driver activates the peripheral when
the first operation is requested or when `nrfx_qspi_activate()` is
called. In case of XIP, the latter needs to be used, as there may
be no standard operation request.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For this SoC, an additional section is conditionally included on top of
the default linker script for Cortex-M. Set `SOC_LINKER_SCRIPT` to the
local `linker.ld`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Fixes failing EBQ test LL/DDI/SCN/BV-88-C Extended Scanning,
Active, Properly Ignore RFU Fields
Several minor modifications made to le_ext_adv_report() to
properly ignore any invalid fields present in the received PDUs
Signed-off-by: Troels Nilsson <trnn@demant.com>
The LC3 coded requires floating point support in
the C library, so let's select REQUIRES_FULL_LIBC
in the module kconfig, instead of having samples
adding it to their prj.conf
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There was a conditional compile misssing for the
BT_PER_ADV_SYNC_TRANSFER_SENDER, potentially leading
to build failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Remove CONFIG_IPM_IMX_REV2, as this Kconfig is no longer needed. The
driver can now be enabled with CONFIG_IPM_IMX.
Update NXP HAL to remove this Kconfig as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove nxp,imx-mu-rev2 compatible. This IP block is the same as the
nxp,imx-mu device, and should be handled by the same compatible
Instead, use CONFIG_HAS_MCUX to determine which HAL APIs should be used
to interact with the messaging unit IP.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The init scripts need a missing wait for OK after sending
AT+CGMM and the AT+CMUX command specifies more parameters
than nessesary, and in some cases incorrectly.
This commit adds the missing wait for OK and fixes the AT+CMUX
commands in the init scripts.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
1. Issue a reset during init to ensure the registers
are in their reset state.
2. The value in counter_set_top_value was not written
to the register. This function now returns -ENOTSUP
3. Make sure the RTC is enabled before we issue RTC_Start
command.
4. Replace calls to SDK API's RTC_StartTimer and
RTC_StopTimer with RTC_EnableTimer
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Hardwaremap testing requires installing requirements-run-tests.txt.
This change adds that to the relevant workflow.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Replace combination of printk() and TC_PRINT() to LOG_DBG() disabled
by default so that it does not affect execution time.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Most of the local functions are static, make code consistent by making
remaining functions static as well.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the BAP broadcast tests to use the BSIM sync API
instead of sleeps, to ensure that everything is sent
and receive correctly, regardless of timing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This chip uses an active low reset, so the correct behavior here is to
define the pin as ACTIVE_LOW, using GPIO_OUTPUT_ACTIVE to assert the
reset and set to 0 to deassert.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This chip uses an active low reset, so the correct behavior here is to
define the pin as ACTIVE_LOW, using GPIO_OUTPUT_ACTIVE to assert the
reset and set to 0 to deassert.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The current code deasserts the reset, just to re-assert it immediately.
Just initialize with OUTPUT_ACTIVE, delay and then de-assert.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Since userspace is not enabled change ZTEST_USER to ZTEST to not
confuse people, other tests are also ZTEST.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test_multi_thread_send_get() test sends and receives mbox messages
with K_FOREVER as timeout, so k_sleep() is not needed here.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
